diff options
Diffstat (limited to 'src/ceph/qa/standalone/mon/osd-pool-create.sh')
| -rwxr-xr-x | src/ceph/qa/standalone/mon/osd-pool-create.sh | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/src/ceph/qa/standalone/mon/osd-pool-create.sh b/src/ceph/qa/standalone/mon/osd-pool-create.sh new file mode 100755 index 0000000..693165d --- /dev/null +++ b/src/ceph/qa/standalone/mon/osd-pool-create.sh @@ -0,0 +1,215 @@ +#!/bin/bash +# +# Copyright (C) 2013, 2014 Cloudwatt <libre.licensing@cloudwatt.com> +# Copyright (C) 2014, 2015 Red Hat <contact@redhat.com> +# +# Author: Loic Dachary <loic@dachary.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU Library Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU Library Public License for more details. +# +source $CEPH_ROOT/qa/standalone/ceph-helpers.sh + +function run() { + local dir=$1 + shift + + export CEPH_MON="127.0.0.1:7105" # git grep '\<7105\>' : there must be only one + export CEPH_ARGS + CEPH_ARGS+="--fsid=$(uuidgen) --auth-supported=none " + CEPH_ARGS+="--mon-host=$CEPH_MON " + + local funcs=${@:-$(set | sed -n -e 's/^\(TEST_[0-9a-z_]*\) .*/\1/p')} + for func in $funcs ; do + setup $dir || return 1 + $func $dir || return 1 + teardown $dir || return 1 + done +} + +# Before http://tracker.ceph.com/issues/8307 the invalid profile was created +function TEST_erasure_invalid_profile() { + local dir=$1 + run_mon $dir a || return 1 + local poolname=pool_erasure + local notaprofile=not-a-valid-erasure-code-profile + ! ceph osd pool create $poolname 12 12 erasure $notaprofile || return 1 + ! ceph osd erasure-code-profile ls | grep $notaprofile || return 1 +} + +function TEST_erasure_crush_rule() { + local dir=$1 + run_mon $dir a || return 1 + # + # choose the crush ruleset used with an erasure coded pool + # + local crush_ruleset=myruleset + ! ceph osd crush rule ls | grep $crush_ruleset || return 1 + ceph osd crush rule create-erasure $crush_ruleset + ceph osd crush rule ls | grep $crush_ruleset + local poolname + poolname=pool_erasure1 + ! ceph --format json osd dump | grep '"crush_rule":1' || return 1 + ceph osd pool create $poolname 12 12 erasure default $crush_ruleset + ceph --format json osd dump | grep '"crush_rule":1' || return 1 + # + # a crush ruleset by the name of the pool is implicitly created + # + poolname=pool_erasure2 + ceph osd erasure-code-profile set myprofile + ceph osd pool create $poolname 12 12 erasure myprofile + ceph osd crush rule ls | grep $poolname || return 1 + # + # a non existent crush ruleset given in argument is an error + # http://tracker.ceph.com/issues/9304 + # + poolname=pool_erasure3 + ! ceph osd pool create $poolname 12 12 erasure myprofile INVALIDRULESET || return 1 +} + +function TEST_erasure_code_profile_default() { + local dir=$1 + run_mon $dir a || return 1 + ceph osd erasure-code-profile rm default || return 1 + ! ceph osd erasure-code-profile ls | grep default || return 1 + ceph osd pool create $poolname 12 12 erasure default + ceph osd erasure-code-profile ls | grep default || return 1 +} + +function TEST_erasure_crush_stripe_unit() { + local dir=$1 + # the default stripe unit is used to initialize the pool + run_mon $dir a --public-addr $CEPH_MON + stripe_unit=$(ceph-conf --show-config-value osd_pool_erasure_code_stripe_unit) + eval local $(ceph osd erasure-code-profile get myprofile | grep k=) + stripe_width = $((stripe_unit * k)) + ceph osd pool create pool_erasure 12 12 erasure + ceph --format json osd dump | tee $dir/osd.json + grep '"stripe_width":'$stripe_width $dir/osd.json > /dev/null || return 1 +} + +function TEST_erasure_crush_stripe_unit_padded() { + local dir=$1 + # setting osd_pool_erasure_code_stripe_unit modifies the stripe_width + # and it is padded as required by the default plugin + profile+=" plugin=jerasure" + profile+=" technique=reed_sol_van" + k=4 + profile+=" k=$k" + profile+=" m=2" + actual_stripe_unit=2048 + desired_stripe_unit=$((actual_stripe_unit - 1)) + actual_stripe_width=$((actual_stripe_unit * k)) + run_mon $dir a \ + --osd_pool_erasure_code_stripe_unit $desired_stripe_unit \ + --osd_pool_default_erasure_code_profile "$profile" || return 1 + ceph osd pool create pool_erasure 12 12 erasure + ceph osd dump | tee $dir/osd.json + grep "stripe_width $actual_stripe_width" $dir/osd.json > /dev/null || return 1 +} + +function TEST_erasure_code_pool() { + local dir=$1 + run_mon $dir a || return 1 + ceph --format json osd dump > $dir/osd.json + local expected='"erasure_code_profile":"default"' + ! grep "$expected" $dir/osd.json || return 1 + ceph osd pool create erasurecodes 12 12 erasure + ceph --format json osd dump | tee $dir/osd.json + grep "$expected" $dir/osd.json > /dev/null || return 1 + + ceph osd pool create erasurecodes 12 12 erasure 2>&1 | \ + grep 'already exists' || return 1 + ceph osd pool create erasurecodes 12 12 2>&1 | \ + grep 'cannot change to type replicated' || return 1 +} + +function TEST_replicated_pool_with_ruleset() { + local dir=$1 + run_mon $dir a + local ruleset=ruleset0 + local root=host1 + ceph osd crush add-bucket $root host + local failure_domain=osd + local poolname=mypool + ceph osd crush rule create-simple $ruleset $root $failure_domain || return 1 + ceph osd crush rule ls | grep $ruleset + ceph osd pool create $poolname 12 12 replicated $ruleset || return 1 + rule_id=`ceph osd crush rule dump $ruleset | grep "rule_id" | awk -F[' ':,] '{print $4}'` + ceph osd pool get $poolname crush_rule 2>&1 | \ + grep "crush_rule: $rule_id" || return 1 + #non-existent crush ruleset + ceph osd pool create newpool 12 12 replicated non-existent 2>&1 | \ + grep "doesn't exist" || return 1 +} + +function TEST_erasure_code_pool_lrc() { + local dir=$1 + run_mon $dir a || return 1 + + ceph osd erasure-code-profile set LRCprofile \ + plugin=lrc \ + mapping=DD_ \ + layers='[ [ "DDc", "" ] ]' || return 1 + + ceph --format json osd dump > $dir/osd.json + local expected='"erasure_code_profile":"LRCprofile"' + local poolname=erasurecodes + ! grep "$expected" $dir/osd.json || return 1 + ceph osd pool create $poolname 12 12 erasure LRCprofile + ceph --format json osd dump | tee $dir/osd.json + grep "$expected" $dir/osd.json > /dev/null || return 1 + ceph osd crush rule ls | grep $poolname || return 1 +} + +function TEST_replicated_pool() { + local dir=$1 + run_mon $dir a || return 1 + ceph osd pool create replicated 12 12 replicated replicated_rule || return 1 + ceph osd pool create replicated 12 12 replicated replicated_rule 2>&1 | \ + grep 'already exists' || return 1 + # default is replicated + ceph osd pool create replicated1 12 12 || return 1 + # default is replicated, pgp_num = pg_num + ceph osd pool create replicated2 12 || return 1 + ceph osd pool create replicated 12 12 erasure 2>&1 | \ + grep 'cannot change to type erasure' || return 1 +} + +function TEST_no_pool_delete() { + local dir=$1 + run_mon $dir a || return 1 + ceph osd pool create foo 1 || return 1 + ceph tell mon.a injectargs -- --no-mon-allow-pool-delete || return 1 + ! ceph osd pool delete foo foo --yes-i-really-really-mean-it || return 1 + ceph tell mon.a injectargs -- --mon-allow-pool-delete || return 1 + ceph osd pool delete foo foo --yes-i-really-really-mean-it || return 1 +} + +function TEST_utf8_cli() { + local dir=$1 + run_mon $dir a || return 1 + # Hopefully it's safe to include literal UTF-8 characters to test + # the fix for http://tracker.ceph.com/issues/7387. If it turns out + # to not be OK (when is the default encoding *not* UTF-8?), maybe + # the character '黄' can be replaced with the escape $'\xe9\xbb\x84' + ceph osd pool create 黄 16 || return 1 + ceph osd lspools 2>&1 | \ + grep "黄" || return 1 + ceph -f json-pretty osd dump | \ + python -c "import json; import sys; json.load(sys.stdin)" || return 1 + ceph osd pool delete 黄 黄 --yes-i-really-really-mean-it +} + +main osd-pool-create "$@" + +# Local Variables: +# compile-command: "cd ../.. ; make -j4 && test/mon/osd-pool-create.sh" +# End: |