diff options
Diffstat (limited to 'src/ceph/doc/ceph-volume/lvm/prepare.rst')
| -rw-r--r-- | src/ceph/doc/ceph-volume/lvm/prepare.rst | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/src/ceph/doc/ceph-volume/lvm/prepare.rst b/src/ceph/doc/ceph-volume/lvm/prepare.rst new file mode 100644 index 0000000..27ebb55 --- /dev/null +++ b/src/ceph/doc/ceph-volume/lvm/prepare.rst @@ -0,0 +1,241 @@ +.. _ceph-volume-lvm-prepare: + +``prepare`` +=========== +This subcommand allows a :term:`filestore` or :term:`bluestore` setup. It is +recommended to pre-provision a logical volume before using it with +``ceph-volume lvm``. + +Logical volumes are not altered except for adding extra metadata. + +.. note:: This is part of a two step process to deploy an OSD. If looking for + a single-call way, please see :ref:`ceph-volume-lvm-create` + +To help identify volumes, the process of preparing a volume (or volumes) to +work with Ceph, the tool will assign a few pieces of metadata information using +:term:`LVM tags`. + +:term:`LVM tags` makes volumes easy to discover later, and help identify them as +part of a Ceph system, and what role they have (journal, filestore, bluestore, +etc...) + +Although initially :term:`filestore` is supported (and supported by default) +the back end can be specified with: + + +* :ref:`--filestore <ceph-volume-lvm-prepare_filestore>` +* :ref:`--bluestore <ceph-volume-lvm-prepare_bluestore>` + +.. _ceph-volume-lvm-prepare_filestore: + +``filestore`` +------------- +This is the OSD backend that allows preparation of logical volumes for +a :term:`filestore` objectstore OSD. + +It can use a logical volume for the OSD data and a partitioned physical device +or logical volume for the journal. No special preparation is needed for these +volumes other than following the minimum size requirements for data and +journal. + +The API call looks like:: + + ceph-volume prepare --filestore --data data --journal journal + +There is flexibility to use a raw device or partition as well for ``--data`` +that will be converted to a logical volume. This is not ideal in all situations +since ``ceph-volume`` is just going to create a unique volume group and +a logical volume from that device. + +When using logical volumes for ``--data``, the value *must* be a volume group +name and a logical volume name separated by a ``/``. Since logical volume names +are not enforced for uniqueness, this prevents using the wrong volume. The +``--journal`` can be either a logical volume *or* a partition. + +When using a partition, it *must* contain a ``PARTUUID`` discoverable by +``blkid``, so that it can later be identified correctly regardless of the +device name (or path). + +When using a partition, this is how it would look for ``/dev/sdc1``:: + + ceph-volume prepare --filestore --data volume_group/lv_name --journal /dev/sdc1 + +For a logical volume, just like for ``--data``, a volume group and logical +volume name are required:: + + ceph-volume prepare --filestore --data volume_group/lv_name --journal volume_group/journal_lv + +A generated uuid is used to ask the cluster for a new OSD. These two pieces are +crucial for identifying an OSD and will later be used throughout the +:ref:`ceph-volume-lvm-activate` process. + +The OSD data directory is created using the following convention:: + + /var/lib/ceph/osd/<cluster name>-<osd id> + +At this point the data volume is mounted at this location, and the journal +volume is linked:: + + ln -s /path/to/journal /var/lib/ceph/osd/<cluster_name>-<osd-id>/journal + +The monmap is fetched using the bootstrap key from the OSD:: + + /usr/bin/ceph --cluster ceph --name client.bootstrap-osd + --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring + mon getmap -o /var/lib/ceph/osd/<cluster name>-<osd id>/activate.monmap + +``ceph-osd`` will be called to populate the OSD directory, that is already +mounted, re-using all the pieces of information from the initial steps:: + + ceph-osd --cluster ceph --mkfs --mkkey -i <osd id> \ + --monmap /var/lib/ceph/osd/<cluster name>-<osd id>/activate.monmap --osd-data \ + /var/lib/ceph/osd/<cluster name>-<osd id> --osd-journal /var/lib/ceph/osd/<cluster name>-<osd id>/journal \ + --osd-uuid <osd uuid> --keyring /var/lib/ceph/osd/<cluster name>-<osd id>/keyring \ + --setuser ceph --setgroup ceph + +.. _ceph-volume-lvm-existing-osds: + +Existing OSDs +------------- +For existing clusters that want to use this new system and have OSDs that are +already running there are a few things to take into account: + +.. warning:: this process will forcefully format the data device, destroying + existing data, if any. + +* OSD paths should follow this convention:: + + /var/lib/ceph/osd/<cluster name>-<osd id> + +* Preferably, no other mechanisms to mount the volume should exist, and should + be removed (like fstab mount points) +* There is currently no support for encrypted volumes + +The one time process for an existing OSD, with an ID of 0 and +using a ``"ceph"`` cluster name would look like:: + + ceph-volume lvm prepare --filestore --osd-id 0 --osd-fsid E3D291C1-E7BF-4984-9794-B60D9FA139CB + +The command line tool will not contact the monitor to generate an OSD ID and +will format the LVM device in addition to storing the metadata on it so that it +can later be startednot contact the monitor to generate an OSD ID and will +format the LVM device in addition to storing the metadata on it so that it can +later be started (for detailed metadata description see :ref:`ceph-volume-lvm-tags`). + + +.. _ceph-volume-lvm-prepare_bluestore: + +``bluestore`` +------------- +The :term:`bluestore` objectstore is the default for new OSDs. It offers a bit +more flexibility for devices. Bluestore supports the following configurations: + +* A block device, a block.wal, and a block.db device +* A block device and a block.wal device +* A block device and a block.db device +* A single block device + +It can accept a whole device (or partition), or a logical volume for ``block``. +If a physical device is provided it will then be turned into a logical volume. +This allows a simpler approach at using LVM but at the cost of flexibility: +there are no options or configurations to change how the LV is created. + +The ``block`` is specified with the ``--data`` flag, and in its simplest use +case it looks like:: + + ceph-volume lvm prepare --bluestore --data vg/lv + +A raw device can be specified in the same way:: + + ceph-volume lvm prepare --bluestore --data /path/to/device + + +If a ``block.db`` or a ``block.wal`` is needed (they are optional for +bluestore) they can be specified with ``--block.db`` and ``--block.wal`` +accordingly. These can be a physical device (they **must** be a partition) or +a logical volume. + +For both ``block.db`` and ``block.wal`` partitions aren't made logical volumes +because they can be used as-is. Logical Volumes are also allowed. + +While creating the OSD directory, the process will use a ``tmpfs`` mount to +place all the files needed for the OSD. These files are initially created by +``ceph-osd --mkfs`` and are fully ephemeral. + +A symlink is always created for the ``block`` device, and optionally for +``block.db`` and ``block.wal``. For a cluster with a default name, and an OSD +id of 0, the directory could look like:: + + # ls -l /var/lib/ceph/osd/ceph-0 + lrwxrwxrwx. 1 ceph ceph 93 Oct 20 13:05 block -> /dev/ceph-be2b6fbd-bcf2-4c51-b35d-a35a162a02f0/osd-block-25cf0a05-2bc6-44ef-9137-79d65bd7ad62 + lrwxrwxrwx. 1 ceph ceph 93 Oct 20 13:05 block.db -> /dev/sda1 + lrwxrwxrwx. 1 ceph ceph 93 Oct 20 13:05 block.wal -> /dev/ceph/osd-wal-0 + -rw-------. 1 ceph ceph 37 Oct 20 13:05 ceph_fsid + -rw-------. 1 ceph ceph 37 Oct 20 13:05 fsid + -rw-------. 1 ceph ceph 55 Oct 20 13:05 keyring + -rw-------. 1 ceph ceph 6 Oct 20 13:05 ready + -rw-------. 1 ceph ceph 10 Oct 20 13:05 type + -rw-------. 1 ceph ceph 2 Oct 20 13:05 whoami + +In the above case, a device was used for ``block`` so ``ceph-volume`` create +a volume group and a logical volume using the following convention: + +* volume group name: ``ceph-{cluster fsid}`` or if the vg exists already + ``ceph-{random uuid}`` + +* logical volume name: ``osd-block-{osd_fsid}`` + + +Storing metadata +---------------- +The following tags will get applied as part of the preparation process +regardless of the type of volume (journal or data) or OSD objectstore: + +* ``cluster_fsid`` +* ``encrypted`` +* ``osd_fsid`` +* ``osd_id`` + +For :term:`filestore` these tags will be added: + +* ``journal_device`` +* ``journal_uuid`` + +For :term:`bluestore` these tags will be added: + +* ``block_device`` +* ``block_uuid`` +* ``db_device`` +* ``db_uuid`` +* ``wal_device`` +* ``wal_uuid`` + +.. note:: For the complete lvm tag conventions see :ref:`ceph-volume-lvm-tag-api` + + +Summary +------- +To recap the ``prepare`` process for :term:`bluestore`: + +#. Accept a logical volume for block or a raw device (that will get converted + to an lv) +#. Accept partitions or logical volumes for ``block.wal`` or ``block.db`` +#. Generate a UUID for the OSD +#. Ask the monitor get an OSD ID reusing the generated UUID +#. OSD data directory is created on a tmpfs mount. +#. ``block``, ``block.wal``, and ``block.db`` are symlinked if defined. +#. monmap is fetched for activation +#. Data directory is populated by ``ceph-osd`` +#. Logical Volumes are are assigned all the Ceph metadata using lvm tags + + +And the ``prepare`` process for :term:`filestore`: + +#. Accept only logical volumes for data and journal (both required) +#. Generate a UUID for the OSD +#. Ask the monitor get an OSD ID reusing the generated UUID +#. OSD data directory is created and data volume mounted +#. Journal is symlinked from data volume to journal location +#. monmap is fetched for activation +#. devices is mounted and data directory is populated by ``ceph-osd`` +#. data and journal volumes are assigned all the Ceph metadata using lvm tags |