diff options
author | Qiaowei Ren <qiaowei.ren@intel.com> | 2018-03-01 14:38:11 +0800 |
---|---|---|
committer | Qiaowei Ren <qiaowei.ren@intel.com> | 2018-03-01 14:38:11 +0800 |
commit | 7da45d65be36d36b880cc55c5036e96c24b53f00 (patch) | |
tree | d4f944eb4f8f8de50a9a7584ffa408dc3a3185b2 /src/ceph/doc/rbd/iscsi-initiator-esx.rst | |
parent | 691462d09d0987b47e112d6ee8740375df3c51b2 (diff) |
remove ceph code
This patch removes initial ceph code, due to license issue.
Change-Id: I092d44f601cdf34aed92300fe13214925563081c
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Diffstat (limited to 'src/ceph/doc/rbd/iscsi-initiator-esx.rst')
-rw-r--r-- | src/ceph/doc/rbd/iscsi-initiator-esx.rst | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/src/ceph/doc/rbd/iscsi-initiator-esx.rst b/src/ceph/doc/rbd/iscsi-initiator-esx.rst deleted file mode 100644 index 18dd583..0000000 --- a/src/ceph/doc/rbd/iscsi-initiator-esx.rst +++ /dev/null @@ -1,36 +0,0 @@ ----------------------------------- -The iSCSI Initiator for VMware ESX ----------------------------------- - -**Prerequisite:** - -- VMware ESX 6.0 or later - -**iSCSI Discovery and Multipath Device Setup:** - -#. From vSphere, open the Storage Adapters, on the Configuration tab. Right click - on the iSCSI Software Adapter and select Properties. - -#. In the General tab click the "Advanced" button and in the "Advanced Settings" - set RecoveryTimeout to 25. - -#. If CHAP was setup on the iSCSI gateway, in the General tab click the "CHAP…" - button. If CHAP is not being used, skip to step 4. - -#. On the CHAP Credentials windows, select “Do not use CHAP unless required by target”, - and enter the "Name" and "Secret" values used on the initial setup for the iSCSI - gateway, then click on the "OK" button. - -#. On the Dynamic Discovery tab, click the "Add…" button, and enter the IP address - and port of one of the iSCSI target portals. Click on the "OK" button. - -#. Close the iSCSI Initiator Properties window. A prompt will ask to rescan the - iSCSI software adapter. Select Yes. - -#. In the Details pane, the LUN on the iSCSI target will be displayed. Right click - on a device and select "Manage Paths". - -#. On the Manage Paths window, select “Most Recently Used (VMware)” for the policy - path selection. Close and repeat for the other disks. - -Now the disks can be used for datastores. |