initial code repo

This patch creates initial code repo.

For ceph, luminous stable release will be used for base code,
and next changes and optimization for ceph will be added to it.

For opensds, currently any changes can be upstreamed into original
opensds repo (https://github.com/opensds/opensds), and so stor4nfv
will directly clone opensds code to deploy stor4nfv environment.
And the scripts for deployment based on ceph and opensds will be
put into 'ci' directory.

Change-Id: I46a32218884c75dda2936337604ff03c554648e4
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>

1 files changed, 168 insertions, 0 deletions

diff --git a/src/ceph/doc/man/8/mount.ceph.rst b/src/ceph/doc/man/8/mount.ceph.rst
new file mode 100644
index 0000000..56900a9
--- /dev/null
+++ b/src/ceph/doc/man/8/mount.ceph.rst
@@ -0,0 +1,168 @@
+:orphan:
+
+========================================
+ mount.ceph -- mount a ceph file system
+========================================
+
+.. program:: mount.ceph
+
+Synopsis
+========
+
+| **mount.ceph** *monaddr1*\ [,\ *monaddr2*\ ,...]:/[*subdir*] *dir* [
+  -o *options* ]
+
+
+Description
+===========
+
+**mount.ceph** is a simple helper for mounting the Ceph file system on
+a Linux host. It serves to resolve monitor hostname(s) into IP
+addresses and read authentication keys from disk; the Linux kernel
+client component does most of the real work. In fact, it is possible
+to mount a non-authenticated Ceph file system without mount.ceph by
+specifying monitor address(es) by IP::
+
+        mount -t ceph 1.2.3.4:/ mountpoint
+
+Each monitor address monaddr takes the form host[:port]. If the port
+is not specified, the Ceph default of 6789 is assumed.
+
+Multiple monitor addresses can be separated by commas. Only one
+responsible monitor is needed to successfully mount; the client will
+learn about all monitors from any responsive monitor. However, it is a
+good idea to specify more than one in case one happens to be down at
+the time of mount.
+
+A subdirectory subdir may be specified if a subset of the file system
+is to be mounted.
+
+Mount helper application conventions dictate that the first two
+options are device to be mounted and destination path. Options must be
+passed only after these fixed arguments.
+
+
+Options
+=======
+
+:command:`wsize`
+  int (bytes), max write size. Default: none (writeback uses smaller of wsize
+  and stripe unit)
+
+:command:`rsize`
+  int (bytes), max read size. Default: none
+
+:command:`rasize`
+  int (bytes), max readahead, multiple of 1024, Default: 8388608
+  (8192*1024)
+
+:command:`osdtimeout`
+  int (seconds), Default: 60
+
+:command:`osdkeepalive`
+  int, Default: 5
+
+:command:`mount_timeout`
+  int (seconds), Default: 60
+
+:command:`osd_idle_ttl`
+  int (seconds), Default: 60
+
+:command:`caps_wanted_delay_min`
+  int, cap release delay, Default: 5
+
+:command:`caps_wanted_delay_max`
+  int, cap release delay, Default: 60
+
+:command:`cap_release_safety`
+  int, Default: calculated
+
+:command:`readdir_max_entries`
+  int, Default: 1024
+
+:command:`readdir_max_bytes`
+  int, Default: 524288 (512*1024)
+
+:command:`write_congestion_kb`
+  int (kb), max writeback in flight. scale with available
+  memory. Default: calculated from available memory
+
+:command:`snapdirname`
+  string, set the name of the hidden snapdir. Default: .snap
+
+:command:`name`
+  RADOS user to authenticate as when using cephx. Default: guest
+
+:command:`secret`
+  secret key for use with cephx. This option is insecure because it exposes
+  the secret on the command line. To avoid this, use the secretfile option.
+
+:command:`secretfile`
+  path to file containing the secret key to use with cephx
+
+:command:`ip`
+  my ip
+
+:command:`noshare`
+  create a new client instance, instead of sharing an existing
+  instance of a client mounting the same cluster
+
+:command:`dirstat`
+  funky `cat dirname` for stats, Default: off
+
+:command:`nodirstat`
+  no funky `cat dirname` for stats
+
+:command:`rbytes`
+  Report the recursive size of the directory contents for st_size on
+  directories.  Default: on
+
+:command:`norbytes`
+  Do not report the recursive size of the directory contents for
+  st_size on directories.
+
+:command:`nocrc`
+  no data crc on writes
+
+:command:`noasyncreaddir`
+  no dcache readdir
+
+
+Examples
+========
+
+Mount the full file system::
+
+        mount.ceph monhost:/ /mnt/foo
+
+If there are multiple monitors::
+
+        mount.ceph monhost1,monhost2,monhost3:/ /mnt/foo
+
+If :doc:`ceph-mon <ceph-mon>`\(8) is running on a non-standard
+port::
+
+        mount.ceph monhost1:7000,monhost2:7000,monhost3:7000:/ /mnt/foo
+
+To mount only part of the namespace::
+
+        mount.ceph monhost1:/some/small/thing /mnt/thing
+
+Assuming mount.ceph(8) is installed properly, it should be
+automatically invoked by mount(8) like so::
+
+        mount -t ceph monhost:/ /mnt/foo
+
+
+Availability
+============
+
+**mount.ceph** is part of Ceph, a massively scalable, open-source, distributed storage system. Please
+refer to the Ceph documentation at http://ceph.com/docs for more
+information.
+
+See also
+========
+
+:doc:`ceph-fuse <ceph-fuse>`\(8),
+:doc:`ceph <ceph>`\(8)