diff options
author | 2018-01-04 13:43:33 +0800 | |
---|---|---|
committer | 2018-01-05 11:59:39 +0800 | |
commit | 812ff6ca9fcd3e629e49d4328905f33eee8ca3f5 (patch) | |
tree | 04ece7b4da00d9d2f98093774594f4057ae561d4 /src/ceph/doc/cephfs/hadoop.rst | |
parent | 15280273faafb77777eab341909a3f495cf248d9 (diff) |
initial code repo
This patch creates initial code repo.
For ceph, luminous stable release will be used for base code,
and next changes and optimization for ceph will be added to it.
For opensds, currently any changes can be upstreamed into original
opensds repo (https://github.com/opensds/opensds), and so stor4nfv
will directly clone opensds code to deploy stor4nfv environment.
And the scripts for deployment based on ceph and opensds will be
put into 'ci' directory.
Change-Id: I46a32218884c75dda2936337604ff03c554648e4
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Diffstat (limited to 'src/ceph/doc/cephfs/hadoop.rst')
-rw-r--r-- | src/ceph/doc/cephfs/hadoop.rst | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/src/ceph/doc/cephfs/hadoop.rst b/src/ceph/doc/cephfs/hadoop.rst new file mode 100644 index 0000000..76d26f2 --- /dev/null +++ b/src/ceph/doc/cephfs/hadoop.rst @@ -0,0 +1,202 @@ +======================== +Using Hadoop with CephFS +======================== + +The Ceph file system can be used as a drop-in replacement for the Hadoop File +System (HDFS). This page describes the installation and configuration process +of using Ceph with Hadoop. + +Dependencies +============ + +* CephFS Java Interface +* Hadoop CephFS Plugin + +.. important:: Currently requires Hadoop 1.1.X stable series + +Installation +============ + +There are three requirements for using CephFS with Hadoop. First, a running +Ceph installation is required. The details of setting up a Ceph cluster and +the file system are beyond the scope of this document. Please refer to the +Ceph documentation for installing Ceph. + +The remaining two requirements are a Hadoop installation, and the Ceph file +system Java packages, including the Java CephFS Hadoop plugin. The high-level +steps are two add the dependencies to the Hadoop installation ``CLASSPATH``, +and configure Hadoop to use the Ceph file system. + +CephFS Java Packages +-------------------- + +* CephFS Hadoop plugin (`hadoop-cephfs.jar <http://ceph.com/download/hadoop-cephfs.jar>`_) + +Adding these dependencies to a Hadoop installation will depend on your +particular deployment. In general the dependencies must be present on each +node in the system that will be part of the Hadoop cluster, and must be in the +``CLASSPATH`` searched for by Hadoop. Typically approaches are to place the +additional ``jar`` files into the ``hadoop/lib`` directory, or to edit the +``HADOOP_CLASSPATH`` variable in ``hadoop-env.sh``. + +The native Ceph file system client must be installed on each participating +node in the Hadoop cluster. + +Hadoop Configuration +==================== + +This section describes the Hadoop configuration options used to control Ceph. +These options are intended to be set in the Hadoop configuration file +`conf/core-site.xml`. + ++---------------------+--------------------------+----------------------------+ +|Property |Value |Notes | +| | | | ++=====================+==========================+============================+ +|fs.default.name |Ceph URI |ceph://[monaddr:port]/ | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.conf.file |Local path to ceph.conf |/etc/ceph/ceph.conf | +| | | | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.conf.options |Comma separated list of |opt1=val1,opt2=val2 | +| |Ceph configuration | | +| |key/value pairs | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.root.dir |Mount root directory |Default value: / | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.mon.address |Monitor address |host:port | +| | | | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.auth.id |Ceph user id |Example: admin | +| | | | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.auth.keyfile |Ceph key file | | +| | | | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.auth.keyring |Ceph keyring file | | +| | | | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.object.size |Default file object size |Default value (64MB): | +| |in bytes |67108864 | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.data.pools |List of Ceph data pools |Default value: default Ceph | +| |for storing file. |pool. | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ +|ceph.localize.reads |Allow reading from file |Default value: true | +| |replica objects | | +| | | | +| | | | ++---------------------+--------------------------+----------------------------+ + +Support For Per-file Custom Replication +--------------------------------------- + +The Hadoop file system interface allows users to specify a custom replication +factor (e.g. 3 copies of each block) when creating a file. However, object +replication factors in the Ceph file system are controlled on a per-pool +basis, and by default a Ceph file system will contain only a single +pre-configured pool. Thus, in order to support per-file replication with +Hadoop over Ceph, additional storage pools with non-default replications +factors must be created, and Hadoop must be configured to choose from these +additional pools. + +Additional data pools can be specified using the ``ceph.data.pools`` +configuration option. The value of the option is a comma separated list of +pool names. The default Ceph pool will be used automatically if this +configuration option is omitted or the value is empty. For example, the +following configuration setting will consider the pools ``pool1``, ``pool2``, and +``pool5`` when selecting a target pool to store a file. :: + + <property> + <name>ceph.data.pools</name> + <value>pool1,pool2,pool5</value> + </property> + +Hadoop will not create pools automatically. In order to create a new pool with +a specific replication factor use the ``ceph osd pool create`` command, and then +set the ``size`` property on the pool using the ``ceph osd pool set`` command. For +more information on creating and configuring pools see the `RADOS Pool +documentation`_. + +.. _RADOS Pool documentation: ../../rados/operations/pools + +Once a pool has been created and configured the metadata service must be told +that the new pool may be used to store file data. A pool is be made available +for storing file system data using the ``ceph fs add_data_pool`` command. + +First, create the pool. In this example we create the ``hadoop1`` pool with +replication factor 1. :: + + ceph osd pool create hadoop1 100 + ceph osd pool set hadoop1 size 1 + +Next, determine the pool id. This can be done by examining the output of the +``ceph osd dump`` command. For example, we can look for the newly created +``hadoop1`` pool. :: + + ceph osd dump | grep hadoop1 + +The output should resemble:: + + pool 3 'hadoop1' rep size 1 min_size 1 crush_ruleset 0... + +where ``3`` is the pool id. Next we will use the pool id reference to register +the pool as a data pool for storing file system data. :: + + ceph fs add_data_pool cephfs 3 + +The final step is to configure Hadoop to consider this data pool when +selecting the target pool for new files. :: + + <property> + <name>ceph.data.pools</name> + <value>hadoop1</value> + </property> + +Pool Selection Rules +~~~~~~~~~~~~~~~~~~~~ + +The following rules describe how Hadoop chooses a pool given a desired +replication factor and the set of pools specified using the +``ceph.data.pools`` configuration option. + +1. When no custom pools are specified the default Ceph data pool is used. +2. A custom pool with the same replication factor as the default Ceph data + pool will override the default. +3. A pool with a replication factor that matches the desired replication will + be chosen if it exists. +4. Otherwise, a pool with at least the desired replication factor will be + chosen, or the maximum possible. + +Debugging Pool Selection +~~~~~~~~~~~~~~~~~~~~~~~~ + +Hadoop will produce log file entry when it cannot determine the replication +factor of a pool (e.g. it is not configured as a data pool). The log message +will appear as follows:: + + Error looking up replication of pool: <pool name> + +Hadoop will also produce a log entry when it wasn't able to select an exact +match for replication. This log entry will appear as follows:: + + selectDataPool path=<path> pool:repl=<name>:<value> wanted=<value> |