Age | Commit message (Collapse) | Author | Files | Lines |
|
Armband uses different 'pod' naming/labeling, so instead of Fuel's
'baremetal' reference, we have 'armband-baremetal', leading to
unresolved job references for the recently added log collection.
Fix that by adding a new 'deploy-type' variable, which corresponds
to either 'baremetal' or 'virtual', aligning with Fuel naming.
While at it, slightly refactor our pod definitions to use the new var.
Change-Id: Ie84c40a5c208072da2e4766233a844f2670d4f87
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Debugging test suite failures is often hard without physical access
to the POD, and even then the environment might be automatically
redeployed before successfully debugging the problem.
So, collect all contents of </var/log> from all cluster nodes
(including the Salt Master node) after all test suites have been
executed as part of the CI job.
Change-Id: Ie5e2526c74f4ed21be9c76c6f6101eb3f434be36
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Fuel and Armband Euphrates jobs are always marked as failed, even
when at least one sub-job passes, due to missing Dovetail job for
that respective stream.
Change-Id: Ibcdde75d70111e82f8498114deabaf7808cc6d74
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: Id47f61c950e1cc036e32e8efe2e2b55193e7c49e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: RELENG-254
Change-Id: I1c658e0af40d2973301b33f760d7fd420e80f253
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
|
|
Functest Alpine not supported yet for aarch64 architecture.
Task for Armband project but until support could be done, the
traditionnal docker shall be used for armband tests
usage of alpine leads to errors [1]
[1]: https://build.opnfv.org/ci/view/functest/job/functest-fuel-armband-baremetal-daily-master/214/console
Change-Id: I48e05a0c7cd97989784fd97348bd331425c4877e
Signed-off-by: Morgan Richomme <morgan.richomme@orange.com>
|
|
|
|
JIRA: FUEL-279
Change-Id: Ie87ecaee17d6bb29776c3056274c59c1264762de
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: FUEL-278
Change-Id: I9f5496d02097c2a6ae1db73b8a5df20b75ce728d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Enable virtual deploy phase for verify multijob for both projects.
Since fuel-defaults already define SSH_KEY param, drop it from
individual jobs.
Fuel:
- drop merge jobs, which used to perform virtual deploys based on
ISO created during verify job;
- cleanup fuel-download-artifact (rm support for merge/verify);
Armband:
- while at it, remove "opnfv-build-enea-defaults", preparing for
arm-build2's retirement.
JIRA: FUEL-278
JIRA: FUEL-287
Change-Id: I354d72d88187e41070f44c723ccc651a0bb9b021
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Cleanup commit c0ba4a5 removed the timed triggers for Armband
baremetal scenarios, bring them back.
Change-Id: I8b8d8d366ecf95594e26f30c1392b26692504021
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Armband no longer requires any artifact before starting a deployment.
Fuel (master and stable/E) no longer requires the artifact either,
but since there are some stable/danube deploy jobs on ZTE PODs, we
will hold off removing <fuel-download-artifact.sh> for a while.
Deprecation warning: fuel-download-artifact.sh will be removed later.
JIRA: ARMBAND-295
Change-Id: I3b26733a1120306879eff83b9fac3390b3f5c7b8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
While at it, cleanup obsolete parameters specific to build ops.
JIRA: FUEL-277
JIRA: FUEL-278
Change-Id: Id45dfe6855c95c425ac9aa771519d450ba9da3b5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Since armband-deploy.sh is merely a clone of fuel-deploy.sh, which
we recently synced, drop armband-deploy.sh in favor of an universal
fuel-deploy.sh, which will handle deploys for both projects.
Change-Id: I653b4e67d9246951a284671e0cf559394661a1ad
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I134feba421d12c4ca428b098aaa2bf52b3dec0ca
|
|
arm-pod3 pod name is changed to arm-pod5
arm-virtual1 pod name is changed to arm-virtual2
Change-Id: I6746fcdd52bbed5b6a61147d0abc5db64876dc97
Signed-off-by: Delia Popescu <delia.popescu@enea.com>
|
|
Re-enable baremetal scenario CI for Fuel scenarios:
- os-nosdn-nofeature-ha-baremetal
- os-odl_l3-nofeature-ha-baremetal (to be renamed to just odl later)
- os-nosdn-ovs-ha-baremetal (Fuel only, no Armband equiv yet)
Change-Id: I9b3b929366a3657c45181632ed46936cb15c3cba
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Adds the 'email-jenkins-admins-on-build-failures' publishers for jobs
which have overridden the default list of publishers.
This will provide Jenkins administrators a time-series list of build
failures to assist in debugging issues with the master and agents.
JIRA: RELENG-257
Change-Id: I28f12877562113c9197ed6429ee2a7f3cdbaf346
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
|
|
- rename "danube" to "euphrates";
- disable "euphrates", to be enabled when ready;
Change-Id: Id4932986e19c664b28749d0b6926d825ea632250
Signed-off-by: Alexandru Nemes <alexandru.nemes@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Sync with changes for Fuel@OPNFV targeting master branch (MCP):
- disable ISO build for master branch;
- turn off upload action & checkout;
- add retrieving OS credentials for MCP;
- disable ISO download for master branch;
Change-Id: I11eacfad7ee1f738119e17c2e63c3d92707f8e1f
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Removed the master jobs until mcp is functional on arm.
Rescheduled the danube jobs 8 hours apart.
Change-Id: I90037a76a50d61c76c13cd68fa5926e1a73e88e6
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
|
|
JIRA: DOVETAIL-432
1, only run against os-(nosdn-odl_l2)-(nofeature-bgpvpn)-ha scenario
this can reduce the CI/pod time resource
dovetail test cases by now (refstack, ha, ipv6, bgpvpn)
2, this has been tested on compass pod, and works well
Change-Id: I1bcf8165d5fcc93c78b47cbd23e0c07f19b01189
Signed-off-by: MatthewLi <matthew.lijun@huawei.com>
|
|
Arm-pod3-2 is a second jenkins slave for arm-pod3.
This slave is arm while the old jenkins slave is x86.
Fatih requested for this slave to be renamed to arm-pod4
instead of arm-pod3-2, even if it's a slave for an existing pod
JIRA: ARMBAND-252
Change-Id: I5645edd7d774f763e5e72115851c7061bfafd344
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
|
|
of "debug""
|
|
JIRA: DOVETAIL-397
now, team decide to use proposed_tests suite instead of debug
Change-Id: Iff8ec0b32a24e51bc2d2536605c9867b94f8921c
Signed-off-by: MatthewLi <matthew.lijun@huawei.com>
|
|
Change-Id: I1ae47f2105744bfea8c8c589f41282d1c4ae2159
Signed-off-by: Alexandru Nemes <alexandru.nemes@enea.com>
|
|
A non-ci pod is made ci-pod for danube release, therefore this patch
modifies the cron jobs to be 4 hours apart instead of 8
This commit should be merged after the lable of the pods are changed
Request: OPNFV Helpdesk #39128
Change-Id: Ic88180d01d9ea03d03b79355cd78891ad612c59b
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
|
|
arm-pod3-2 is an aarch64 jenkins slave for the same POD as the existing
x86 jenkins slave arm-pod3. This commit adds jobs so we can deploy the
POD and run functest from the aarch64 jenkins slave.
These jobs are non-ci
JIRA: ARMBAND-241
Change-Id: Ie3b808a641e44649c02f3b75c83d79119217fdfe
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
|
|
This commit rebalances the nr of runs between master and danube branch
for CI jobs
JIRA: ARMBAND-238
Change-Id: I541ddf3974680096d503829b279cb26ab76577bc
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
|
|
Here are the projects that were branched:
I will double check against this list that these changes make sense
and that no one is missing as I go forward.
wiki page of participating projects, and their jobs:
https://wiki.opnfv.org/display/SWREL/Milestone+Compliance+for+Danube
apex - already enabled
armband - done
availability - already enabled
barometer - done
bottlenecks - already enabled
compass4nfv - done
copper - already enabled
daisy - (not participating -- keep jobs disabled?)
doctor - already enabled
domino - already enabled
fds - N/A
fuel - done
functest - already enabled
ipv6 - already enabled
joid - done
kvmfornfv - already enabled
models - already enabled
multisite - done
netready - NOT DONE
opera - NOT DONE
opnfvdocs - done
orchestra - Not participating
onosfw - done
ovsnfv - done
parser - N/A
promise - already enabled
qtip - already enabled
sdnvpn - N/A
snaps - done
securityscanning - N/A
sfc - N/A
storperf - done
ves - already enabled
vswitchperf - already enabled
yardstick - already enabled
Change-Id: I803662faf05c8554cfe7fa5f85da9521f72b03ff
Signed-off-by: Aric Gardner <agardner@linuxfoundation.org>
|
|
GIT_BRANCH parameter is different; master or stable/danube in daily
jobs, but 'refs/changes/57/27657/6' in verify jobs. This breaks some
job builders triggered by the both types of jobs. We have GERRIT_BRANCH
parameter for verify jobs to identify stream and expected branch into
the patch will be merged after it got +2 and submitted.
To avoid further confusion and to have common job builders for daily
and verify jobs, this patch introduce BRANCH parameter.
GERRIT_BRANCH is now deprecated.
Change-Id: Ibcd42c1cd8a0be0f330878b21d3011f1ec97043b
Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
|
|
This patch defines 'logrotate-default' property and replace 'logrotate'
by it, as 'logrotate' is deprecated on jenkins>=1.637 .
Change-Id: I900975e5b3f590bb7a4d430e2f623931ae782bf4
Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
|
|
|
|
Danube stream for the projects with daily jobs is disabled.
Danube stream for the projects without daily jobs is left as enabled
as there will be no changes coming to danube branch until branch is created.
Dovetail, Apex and Fuel jobs have not been updated yet.
Change-Id: Ice39826c8f829157fa864370557837290838f634
Signed-off-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>
|
|
JIRA: ARMBAND-181
With Colorado release out, we need more jobs on master branch than
on colorado branch
Change-Id: Ic068a121567381ecfb527599ec2af530c1a8e93e
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
Change-Id: Iad856adf625a56c2f5c366fb414746d1e9e16691
Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
|
|
This patch makes sure we use 2 types of scm, and allows us to specify
them by adding one line in job-templates.
- git-scm # for daily jobs and merge jobs
- git-scm-gerrit # for verify jobs [New]
Change-Id: Iddc8a5e0e115193c7081a6d6c53da209900e95c8
Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
|
|
JIRA: DOVETAIL-153
1.based on https://gerrit.opnfv.org/gerrit/#/c/25681/, however, this has to be
triggered manually, not convinient for debugging, and may affect daily ci loops
2.not used for release criteria or compliance,
only to debug the dovetail tool bugs with arm pods
Change-Id: Ide35f50129f30f4c8d7b7f50d52f9fa1d35cac69
Signed-off-by: MatthewLi <matthew.lijun@huawei.com>
|
|
Pod virtual1 was added in the ENEA-ARM lab
This commit adds the jobs for it
JIRA: ARMBAND-162
Change-Id: Icaa798691f5ff60a58ae083eb1c366170c464b92
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
arm-pod-3 will be removed as CI pod and this commit add triggers
to make it a non-ci pod
Change-Id: Ice16b8d32c553a059a2c9885fd801a736a59a14d
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
Added old l2 sfc scenarios for both ha and noha on master branch
JIRA: ARMBAND-144
Change-Id: Ie28f9f9b32abe82b9f596d5b7d6336e2df425eb4
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
Some of the jobs were programmed at the same time
This fix sets the jobs 8 hours apart
Change-Id: I13463b8a00df67519e2e2b8e333b4c625f1e9d8b
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
Modified the cron jobs to be 8 hours apart instead of 4
Change-Id: I670811901c7403f81812b1d51cdbaf46904e878c
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
Change-Id: I1d5dca9f7cc2c54e90af454a503e77486be361ef
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
|
|
Change-Id: I72e061ae57ccdd06520dbf93cdf146390bfc0591
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
|
|
We were refering jobs in other projects (mainly fuel) because
the ci pods were named jost baremetal and virtual
Change-Id: I9d02e2e61fe666f4ef46c1eb62f41da065e46059
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
|
|
|
|
Change-Id: I8b011aafd333c78eaeed59040476b1325e2dc56c
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
|
|
Change-Id: I7fcd24852a0d1aecdfacf5f3cb1dfd49fb711916
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
|
|
After previous change introducing the usage of node labels for
Armband CI deploy jobs, we discovered that the old params were
not applied to labeled pods.
To complicate things, we had different DEFAULT_BRIDGE params
for each CI pod, which contradicts the Jenkins templating
paradigm.
Since we already have a mechanism in place for overriding
env vars based on the POD we are running against, move both
<DEPLOY_TIMEOUT> and <DEFAULT_BRIDGE> params to our local_env,
which is sourced by the deploy script and can apply POD specific
configuration.
Add missing LAB_CONFIG_URL to newly added baremetal and virtual
defaults for Armband.
While at it, also replace "brahmaputra" comments with "colorado".
v2 -> v3:
Source local_env before using DEFAULT_BRIDGE in <armband-deploy.sh>.
Previously, we (Armband) sourced this file in our <ci/deploy.sh> [1],
which will be dropped after this change is merged.
[1] https://git.opnfv.org/cgit/armband/tree/ci/deploy.sh#n24
Change-Id: Ibafea25b3df8c3118ce05e3f40934c8e8b9c8dcd
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|