diff options
Diffstat (limited to 'jjb/cperf')
| -rw-r--r-- | jjb/cperf/cperf-ci-jobs.yml | 264 |
1 files changed, 132 insertions, 132 deletions
diff --git a/jjb/cperf/cperf-ci-jobs.yml b/jjb/cperf/cperf-ci-jobs.yml index dc209d644..fdd3509d1 100644 --- a/jjb/cperf/cperf-ci-jobs.yml +++ b/jjb/cperf/cperf-ci-jobs.yml @@ -1,3 +1,4 @@ +--- ################################### # job configuration for cperf ################################### @@ -5,40 +6,39 @@ name: cperf-ci-jobs project: cperf -#-------------------------------- -# BRANCH ANCHORS -#-------------------------------- + # ------------------------------- + # BRANCH ANCHORS + # ------------------------------- master: &master - stream: master - branch: '{stream}' - gs-pathname: '' - docker-tag: 'latest' + stream: master + branch: '{stream}' + gs-pathname: '' + docker-tag: 'latest' danube: &danube - stream: danube - branch: 'stable/{stream}' - gs-pathname: '/{stream}' - docker-tag: 'stable' - -#-------------------------------- -# POD, INSTALLER, AND BRANCH MAPPING -#-------------------------------- + stream: danube + branch: 'stable/{stream}' + gs-pathname: '/{stream}' + docker-tag: 'stable' + + # ------------------------------- + # POD, INSTALLER, AND BRANCH MAPPING + # ------------------------------- pod: -#-------------------------------- -# master -#-------------------------------- - - intel-pod2: - installer: apex - <<: *master - - intel-pod2: - installer: apex - <<: *danube -#-------------------------------- + # ------------------------------- + # master + # ------------------------------- + - intel-pod2: + installer: apex + <<: *master + - intel-pod2: + installer: apex + <<: *danube testsuite: - - 'daily' + - 'daily' jobs: - - 'cperf-{installer}-{pod}-{testsuite}-{stream}' + - 'cperf-{installer}-{pod}-{testsuite}-{stream}' ################################ # job template @@ -49,35 +49,35 @@ concurrent: true properties: - - logrotate-default - - throttle: - enabled: true - max-per-node: 1 - option: 'project' + - logrotate-default + - throttle: + enabled: true + max-per-node: 1 + option: 'project' wrappers: - - build-name: - name: '$BUILD_NUMBER Suite: $CPERF_SUITE_NAME Scenario: $DEPLOY_SCENARIO' - - timeout: - timeout: 400 - abort: true + - build-name: + name: '$BUILD_NUMBER Suite: $CPERF_SUITE_NAME Scenario: $DEPLOY_SCENARIO' + - timeout: + timeout: 400 + abort: true parameters: - - project-parameter: - project: '{project}' - branch: '{branch}' - - '{pod}-defaults' - - '{installer}-defaults' - - cperf-parameter: - testsuite: '{testsuite}' - gs-pathname: '{gs-pathname}' - docker-tag: '{docker-tag}' + - project-parameter: + project: '{project}' + branch: '{branch}' + - '{pod}-defaults' + - '{installer}-defaults' + - cperf-parameter: + testsuite: '{testsuite}' + gs-pathname: '{gs-pathname}' + docker-tag: '{docker-tag}' scm: - - git-scm + - git-scm builders: - - 'cperf-{testsuite}-builder' + - 'cperf-{testsuite}-builder' ######################## # parameter macros @@ -85,22 +85,22 @@ - parameter: name: cperf-parameter parameters: - - string: - name: CPERF_SUITE_NAME - default: '{testsuite}' - description: "Suite name to run" - - string: - name: GS_PATHNAME - default: '{gs-pathname}' - description: "Version directory where the opnfv documents will be stored in gs repository" - - string: - name: CI_DEBUG - default: 'false' - description: "Show debug output information" - - string: - name: DOCKER_TAG - default: '{docker-tag}' - description: 'Tag to pull docker image' + - string: + name: CPERF_SUITE_NAME + default: '{testsuite}' + description: "Suite name to run" + - string: + name: GS_PATHNAME + default: '{gs-pathname}' + description: "Version directory where the opnfv documents will be stored in gs repository" + - string: + name: CI_DEBUG + default: 'false' + description: "Show debug output information" + - string: + name: DOCKER_TAG + default: '{docker-tag}' + description: 'Tag to pull docker image' ######################## # trigger macros @@ -112,79 +112,79 @@ - builder: name: cperf-daily-builder builders: - - 'cperf-cleanup' - - 'cperf-robot-cbench' + - 'cperf-cleanup' + - 'cperf-robot-cbench' - builder: name: cperf-robot-cbench builders: - - shell: | - #!/bin/bash - set -o errexit - set -o nounset - set -o pipefail - undercloud_mac=$(sudo virsh domiflist undercloud | grep default | \ - grep -Eo "[0-9a-f]+:[0-9a-f]+:[0-9a-f]+:[0-9a-f]+:[0-9a-f]+:[0-9a-f]+") - INSTALLER_IP=$(/usr/sbin/arp -e | grep ${undercloud_mac} | awk {'print $1'}) - - sudo scp -o StrictHostKeyChecking=no root@$INSTALLER_IP:/home/stack/overcloudrc /tmp/overcloudrc - sudo chmod 755 /tmp/overcloudrc - source /tmp/overcloudrc - - # robot suites need the ssh key to log in to controller nodes, so throwing it - # in tmp, and mounting /tmp as $HOME as far as robot is concerned - sudo rm -rf /tmp/.ssh - sudo mkdir /tmp/.ssh - sudo chmod 0700 /tmp/.ssh - sudo scp -o StrictHostKeyChecking=no root@$INSTALLER_IP:/home/stack/.ssh/id_rsa /tmp/.ssh/ - sudo chown -R jenkins-ci:jenkins-ci /tmp/.ssh - # done with sudo. jenkins-ci is the user from this point - chmod 0600 /tmp/.ssh/id_rsa - - # cbench requires the openflow drop test feature to be installed. - sshpass -p karaf ssh -o StrictHostKeyChecking=no \ - -o UserKnownHostsFile=/dev/null \ - -o LogLevel=error \ - -p 8101 karaf@$SDN_CONTROLLER_IP \ - feature:install odl-openflowplugin-flow-services-ui odl-openflowplugin-drop-test - - docker pull opnfv/cperf:$DOCKER_TAG - - robot_cmd="pybot -e exclude -L TRACE -d /tmp \ - -v ODL_SYSTEM_1_IP:${SDN_CONTROLLER_IP} \ - -v ODL_SYSTEM_IP:${SDN_CONTROLLER_IP} \ - -v BUNDLEFOLDER:/opt/opendaylight \ - -v RESTCONFPORT:8081 \ - -v USER_HOME:/tmp \ - -v USER:heat-admin \ - -v ODL_SYSTEM_USER:heat-admin \ - -v TOOLS_SYSTEM_IP:localhost \ - -v of_port:6653" - robot_suite="/home/opnfv/repos/odl_test/csit/suites/openflowplugin/Performance/010_Cbench.robot" - - docker run -i -v /tmp:/tmp opnfv/cperf:$DOCKER_TAG ${robot_cmd} ${robot_suite} + - shell: | + #!/bin/bash + set -o errexit + set -o nounset + set -o pipefail + undercloud_mac=$(sudo virsh domiflist undercloud | grep default | \ + grep -Eo "[0-9a-f]+:[0-9a-f]+:[0-9a-f]+:[0-9a-f]+:[0-9a-f]+:[0-9a-f]+") + INSTALLER_IP=$(/usr/sbin/arp -e | grep ${undercloud_mac} | awk {'print $1'}) + + sudo scp -o StrictHostKeyChecking=no root@$INSTALLER_IP:/home/stack/overcloudrc /tmp/overcloudrc + sudo chmod 755 /tmp/overcloudrc + source /tmp/overcloudrc + + # robot suites need the ssh key to log in to controller nodes, so throwing it + # in tmp, and mounting /tmp as $HOME as far as robot is concerned + sudo rm -rf /tmp/.ssh + sudo mkdir /tmp/.ssh + sudo chmod 0700 /tmp/.ssh + sudo scp -o StrictHostKeyChecking=no root@$INSTALLER_IP:/home/stack/.ssh/id_rsa /tmp/.ssh/ + sudo chown -R jenkins-ci:jenkins-ci /tmp/.ssh + # done with sudo. jenkins-ci is the user from this point + chmod 0600 /tmp/.ssh/id_rsa + + # cbench requires the openflow drop test feature to be installed. + sshpass -p karaf ssh -o StrictHostKeyChecking=no \ + -o UserKnownHostsFile=/dev/null \ + -o LogLevel=error \ + -p 8101 karaf@$SDN_CONTROLLER_IP \ + feature:install odl-openflowplugin-flow-services-ui odl-openflowplugin-drop-test + + docker pull opnfv/cperf:$DOCKER_TAG + + robot_cmd="pybot -e exclude -L TRACE -d /tmp \ + -v ODL_SYSTEM_1_IP:${SDN_CONTROLLER_IP} \ + -v ODL_SYSTEM_IP:${SDN_CONTROLLER_IP} \ + -v BUNDLEFOLDER:/opt/opendaylight \ + -v RESTCONFPORT:8081 \ + -v USER_HOME:/tmp \ + -v USER:heat-admin \ + -v ODL_SYSTEM_USER:heat-admin \ + -v TOOLS_SYSTEM_IP:localhost \ + -v of_port:6653" + robot_suite="/home/opnfv/repos/odl_test/csit/suites/openflowplugin/Performance/010_Cbench.robot" + + docker run -i -v /tmp:/tmp opnfv/cperf:$DOCKER_TAG ${robot_cmd} ${robot_suite} - builder: name: cperf-cleanup builders: - - shell: | - #!/bin/bash - [[ $CI_DEBUG == true ]] && redirect="/dev/stdout" || redirect="/dev/null" - - echo "Cleaning up docker containers/images..." - # Remove previous running containers if exist - if [[ ! -z $(docker ps -a | grep opnfv/cperf) ]]; then - echo "Removing existing opnfv/cperf containers..." - docker ps -a | grep opnfv/cperf | awk '{print $1}' | xargs docker rm -f >${redirect} - fi - - # Remove existing images if exist - if [[ ! -z $(docker images | grep opnfv/cperf) ]]; then - echo "Docker images to remove:" - docker images | head -1 && docker images | grep opnfv/cperf >${redirect} - image_tags=($(docker images | grep opnfv/cperf | awk '{print $2}')) - for tag in "${image_tags[@]}"; do - echo "Removing docker image opnfv/cperf:$tag..." - docker rmi opnfv/cperf:$tag >/dev/null - done - fi + - shell: | + #!/bin/bash + [[ $CI_DEBUG == true ]] && redirect="/dev/stdout" || redirect="/dev/null" + + echo "Cleaning up docker containers/images..." + # Remove previous running containers if exist + if [[ ! -z $(docker ps -a | grep opnfv/cperf) ]]; then + echo "Removing existing opnfv/cperf containers..." + docker ps -a | grep opnfv/cperf | awk '{print $1}' | xargs docker rm -f >${redirect} + fi + + # Remove existing images if exist + if [[ ! -z $(docker images | grep opnfv/cperf) ]]; then + echo "Docker images to remove:" + docker images | head -1 && docker images | grep opnfv/cperf >${redirect} + image_tags=($(docker images | grep opnfv/cperf | awk '{print $2}')) + for tag in "${image_tags[@]}"; do + echo "Removing docker image opnfv/cperf:$tag..." + docker rmi opnfv/cperf:$tag >/dev/null + done + fi |