summaryrefslogtreecommitdiffstats
path: root/xci
AgeCommit message (Collapse)AuthorFilesLines
2018-01-29Merge "xci: Record deployment scenario when collecting XCI info"Markos Chandras1-1/+2
2018-01-26xci: Record deployment scenario when collecting XCI infoMarkos Chandras1-1/+2
Add the DEPLOY_SCENARIO variable to the list of information we collect when deployment fails. Change-Id: I7081b80feea1d3d2ff83e54bd5e614b4ea98964d Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-26xci: run-functest: Add required functest packagesMarkos Chandras1-0/+7
The package requirements are the same across distros so we simply hardcode them in the task. Fixes the following problem: fatal: [opnfv]: FAILED! => {"changed": true, "cmd": "/root/run-functest.sh", "delta": "0:00:09.150226", "end": "2018-01-26 14:01:18.758704", "failed": true, "rc": 125, "start": "2018-01-26 1 4:01:09.608478", "stderr": "/root/run-functest.sh: line 14: wget: command not found Change-Id: Ib07acac18f8ece1111ee0706766f32005d0ac1da Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-24xci: Integrate functestFatih Degirmenci5-11/+19
This change integrates functest in most easiest and messy way to get it up and running to bring functest into CI. The reason for this is that there are strange failures during functest healthcheck and it is important to look into those rather than beautifying how functest is integrated at this phase. Change-Id: I42e993be4aa15da022fa1e0069338447780f177e Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-01-23Merge "xci: scripts: vm: Retry when timer expires"Markos Chandras1-12/+4
2018-01-23xci: scripts: vm: Retry when timer expiresMarkos Chandras1-12/+4
We should look again for active package managers when the timer expires to avoid locking issues. Change-Id: I88f0299a87befce17d11ba7581f0330979a25345 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-22Merge "xci: xci-deploy.sh: Drop warning for CentOS"Markos Chandras1-7/+0
2018-01-22Merge "xci: get-opnfv-scenario-requirements.yml: Check if facts are set"Markos Chandras1-2/+5
2018-01-19xci: get-opnfv-scenario-requirements.yml: Check if facts are setMarkos Chandras1-2/+5
When the user selects an invalid combination then some facts may not be set so the deployment may fail in a crypt way like in the following case fatal: [localhost]: FAILED! => {"failed": true, "msg": "The conditional check 'deploy_scenario_installer' failed. The error was: error while evaluating conditional (deploy_scenario_installer): 'deploy_scenario_installer' is undefined\n\nThe error appears to have been in '/home/opnfv/releng-xci/xci/playbooks/get-opnfv-scenario-requirements.yml': line 114, column 11, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n when: item.installer == XCI_INSTALLER\n - set_fact:\n ^ here\n"} Change-Id: I931376d99bb178b15c4a9a71d47b48b01b858e4e Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-19xci: xci-deploy.sh: Drop warning for CentOSMarkos Chandras1-7/+0
The basic support for CentOS has been merged and it passes the CI so drop the warning. Change-Id: I70e6ba0fcd851d2eb9bfcb24d185276ed68c1005 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-15Enable running on CentOS/RedHat familyTapio Tallgren2-5/+4
Changes that make it possible to run XCI on CentOS: - Remove the check on xci-deploy.sh script that exists on RedHat family (including CentOS) and making the error into a warning. - Add centos to a distro in opnfv-scenario-requirements Change-Id: Ief6f1e50d8c7c9d8787641827e57682a6e0549e4 Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com>
2018-01-15Create CentOS networking configurationTapio Tallgren4-0/+49
Change-Id: If8c0de44c313fdc22b1c7443b12d42769035c5b0 Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com>
2018-01-15Rename centos.yml to redhat.yml in configure-nfs/varsTapio Tallgren1-0/+0
'redhat' as a ansible_os_family covers both the RedHat distros and CentOS. Change-Id: I2ab56024d2c0f1f40a014a236cfd94ef38daad04 Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com>
2018-01-15Bump OSA-galera_server SHA to fix a CentOS issueTapio Tallgren1-1/+1
Galera installation in CentOS fails because the mysqld.sock file is in a different location, despite what the my.cnf configuration tells. This has been worked around in upstream OSA-galera_server: https://git.openstack.org/cgit/openstack/openstack-ansible-galera_server/ commit/?id=f2bfbd38513ac8d61ba4e02a4d5ef6cbbca259cc Change-Id: Ied11571189eff8cbab0f1990a7599b51cad9ea2b Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com>
2018-01-08xci: Rename 'nfvi' to 'installer'Markos Chandras41-37/+37
Using 'installer' to describe the tool that will deploy the foundations of a particular XCI scenario is more appropriate than NFVI which normally describes both the physical and virtual resources needed by an NFV deployment. Change-Id: Ib8b1aac58673bf705ce2ff053574fd10cb390d71 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-08xci: nfvi: OSA: Drop SUSE workaroundMarkos Chandras1-7/+0
The upstream patchset has been merged, so drop the SUSE specific workaround when obtaining the status of the galera cluster. Link: https://review.openstack.org/#/c/508154/ Change-Id: Ic990e6939fb794a532caf8af2759969198fa5d3a Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-03xci: Record distribution and NFVI information for scenariosMarkos Chandras2-18/+57
A scenario may only support certain NFVIs or distributions so we need a mapping with all these things so we know what can be tested and where. Change-Id: Ibf1b640b762085f58627e05e1d2ca13edfc4d716 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-03xci: Decouple VM distribution from host OSMarkos Chandras4-9/+9
Introduce a new XCI_DISTRO variable to select the distribution to deploy on the VMs in order to make deployments more flexible and decouple the VM OS selection from the host one. The default value for this new variable is to match the host OS but users can always set it to one of the supported distributions. We can now simply execute the install-ansible.sh script instead of sourcing it in order to keep the environment as clean as possible. Change-Id: Ia74eb0422f983848cde0fb7b220ea1035dfa78bc Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-03xci: nfvi: OSA: Remove duplicate xci-deploy.sh scriptMarkos Chandras1-183/+0
It was committed by accident in c74cfd33fc3c ("xci: OSA: Move all the OSA specific playbooks to the NFVI directory") so drop it. Change-Id: I5de91f0aad750a9cb723a46baa63e75beb3180de Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-03Merge "[XCI] move osa files into xci/nfvi/osa/files"Markos Chandras30-13/+14
2018-01-03[XCI] move osa files into xci/nfvi/osa/fileswutianwei30-13/+14
we maybe introduce other NFVI in the future in XCI. it is necessary to put the nfvi files to corresponding directory xci/nfvi/$NFVI/files, otherwise the files directory will be confused. Change-Id: Iea98167ff0bc8d338a94fe1c064ac0ab396c53d3 Signed-off-by: wutianwei <wutianwei1@huawei.com>
2017-12-22xci: scenarios: Fix location when copying scenarios to rolesMarkos Chandras1-6/+6
The location where we were putting the scenarios was wrong as it was placing them in xci/playbooks/roles/$scenario/$scenario so in the end the Ansible couldn't find the role we were looking for. As a result, the role was never executed. Moreover, we can use the synchronize module instead of the shell which should be both faster and safer. Change-Id: I3d996652bb6a62d23e259da5674d94596dad4d8d Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-22Merge "xci: playbooks: Copy local changes to scenarios"Markos Chandras1-0/+12
2017-12-22Merge "xci: nfvi: OSA: Set 'pipefail' when SSHing on the OPNFV host"Markos Chandras1-6/+6
2017-12-22Merge "bifrost: Bump bifrost SHA"Markos Chandras1-1/+1
2017-12-22xci: playbooks: Copy local changes to scenariosMarkos Chandras1-0/+12
Make sure that any local changes to scenarios are being propagated to the checkouts. This should only happen when we are testing the 'master' branch of the scenario since it may be desirable to test a specific SHA in which case we shouldn't modify the checkout code. Change-Id: I4197f09a3e4d5a54c86905bc556b06e08948fbc2 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-22Merge "Bump sha on openstack-ansible-lxc_hosts"Markos Chandras1-1/+1
2017-12-21Bump sha on openstack-ansible-lxc_hostsTapio Tallgren1-1/+1
The commit 6b529de0315fe6cd12f6e78c00a5f2f2d3a01e28 in openstack-ansible-lxc_hosts reverts an earlier change that introduced systemd-networkd to lxc containers that run OpenStack services. This prevents the containers from being stopped (ie, lxc-stop fails until it times out), since systemd-networkd restarts. lxc-stop sends the SIGRT+3 message to the container which the container interprets as "halt". systemd-networkd conflicts with shutdown, so when the system tries to enter halt, systemd-networkd gets started again. As a result, the container does not shut down cleanly. This patch uses a version of openstack-ansible-lxc_hosts that does not use systemd-networkd in the containers. Change-Id: Ie85d2117ce2e6e8afa87810d690eab78e3b3be3d Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com>
2017-12-21xci: nfvi: OSA: Set 'pipefail' when SSHing on the OPNFV hostMarkos Chandras1-6/+6
We need to set the 'pipefail' option so if an SSH command fails we stop the deployment instead of silently ignoring it just because the right leg of the pipe succeeded. Change-Id: Iebc720fbd3e6e96fc7135a6cf15e3c0941974d2c Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-21Fix the parameter of scenario directorieswutianwei1-2/+2
1. the "+" and "'" will be part of the string in the path parameter of ansible. So the directories we create are not right. we need remove these char. 2. it miss the "{{" in ansible variable Change-Id: I30c9804450588c63f5f18c63c1d90cd869fad90e Signed-off-by: wutianwei <wutianwei1@huawei.com>
2017-12-21Merge "xci: OSA: Move all the OSA specific playbooks to the NFVI directory"Markos Chandras13-40/+228
2017-12-21xci: OSA: Move all the OSA specific playbooks to the NFVI directoryMarkos Chandras13-40/+228
Move all the playbooks that only make sense for OpenStack-Ansible deployments to the NFVI/OSA directory where they belong. This further disassociates XCI from OSA. Change-Id: Iab8b6dc81d9025a1d85608a98fb1eee0f1c6a69f Signed-off-by: Markos Chandras <mchandras@suse.de> Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-21xci: playbooks: Fix conditional for scenario/flavor factMarkos Chandras1-1/+1
We need to use proper jinja2 code to set the fact properly. Change-Id: I903233c0e059edf2af973ea9c08b8bd80795e1a9 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-20Merge "Rename variable OPNFV_SCENARIO to DEPLOY_SCENARIO"Fatih Degirmenci6-16/+16
2017-12-20bifrost: Bump bifrost SHAMarkos Chandras1-1/+1
Bump the bifrost SHA so we can get rid of the testvm.xml.j2 template which has now made it upstream. Change-Id: Ia9cdd999a5702f37125d38e0ba68bb31920d2117 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-20Merge "Pin os_heat role to the version with working policy"Fatih Degirmenci1-1/+1
2017-12-19Pin os_heat role to the version with working policyFatih Degirmenci1-1/+1
Upstream change modifying policy.json results in failures with several heat test case failures with functest healthcheck. https://review.openstack.org/#/c/526306/ Using the policy.json from the earlier commit seems to solve the failures which is this https://git.openstack.org/cgit/openstack/openstack-ansible-os_heat/commit/?id=0b3eb9348d55d6b1cf077a2c45b297f9a1be730d Change-Id: Iaac0911e73743d1b628cc8d4abe460a0a2a66a84 Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-19Rename variable OPNFV_SCENARIO to DEPLOY_SCENARIOFatih Degirmenci6-16/+16
Rest of the OPNFV projects use the variable DEPLOY_SCENARIO so XCI should be aligned with them as well even though OPNFV_SCENARIO fits better than DEPLOY_SCENARIO. Change-Id: Id48c41fa8a1fa9493cfc7a4906f64b6d8ed27d64 Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-19Update osa version files for master branch as wellFatih Degirmenci1-3/+3
This is needed in order to update the files before we attempt to run osa-periodic job. Change-Id: Ied5a53c294fd753039a6f79fa0ebce24b515cdba Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-18Merge "Increase ram of XCI VM and change disk cache type for all VMs"Fatih Degirmenci5-6/+6
2017-12-18Merge "Add tacker to the list of components to install"Markos Chandras1-0/+1
2017-12-18Merge "xci: Move OpenStack-Ansible out of the main script"Markos Chandras3-182/+204
2017-12-18Increase ram of XCI VM and change disk cache type for all VMsFatih Degirmenci5-6/+6
These options seem to help with the functest execution within XCI VM. Change-Id: I3b9b6b02fc571feb42543025f8ab179c6db18e0a Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-15Add tacker to the list of components to installManuel Buil1-0/+1
Tacker is already part of the upstream setup-openstack.yml but as releng-xci overwrites it, tacker does not get deployed. Adding it to the setup-openstack.yml of releng-xci does not disturb the other scenarios as it will only be deployed when the tacker container is defined which only happens when deploying odl-sfc Change-Id: Ifd76fc49369c114c55e966eb20658d82c99e14cb Signed-off-by: Manuel Buil <mbuil@suse.com>
2017-12-15xci: scripts: start-new-vm: Use host-passthrough to use the real host CPUMarkos Chandras1-1/+1
The host-passthrough mode will allow the VM to use all the host cpu features so it should provide the best possible CPU performance. Change-Id: I6ecd0363d046aaefa08f9e97144aa9ca9f1afae5 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-15xci: Move OpenStack-Ansible out of the main scriptMarkos Chandras3-182/+204
In preparation for supporting more NFVIs in XCI, we need to make the main script NFVI agnostic. Right now, our NFVI is being deployed using bifrost+OSA so we keep bifrost in the main script since the hardware provisioning is NFVI agnostic (at least for now) but we move OSA to its own directory. This should allow more NFVI to plug into XCI by simply providing a nfvi-deploy.sh script. The user can select the preferred NFVI using the XCI_NFVI variable. Change-Id: Ieeacd3b22a64d363feff5d43ff23a80c39038837 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-14Merge "xci: Add flavor information for scenarios"Markos Chandras2-1/+32
2017-12-14Merge "xci: scripts: vm: Use virtio for disk and network I/O"Markos Chandras1-1/+1
2017-12-14xci: Add flavor information for scenariosMarkos Chandras2-1/+32
Scenarios may not support all XCI flavors so record that information per scenario basis. This will resolve failures when we try to deploy a scenario that doesn't support the selected flavor. JIRA: RELENG-338 Change-Id: I5f73b139ee6c1831896aa32147c4dc1368673d92 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-14xci: scripts: vm: Use virtio for disk and network I/OMarkos Chandras1-1/+1
This ensures that the virtio paravirtualization driver is used for both disk and network I/O which should provide the best performance since we no longer need to emulate a real bus or driver. Change-Id: Ic46a38f51b06cb4b848d87d890d23fec022b2f15 Signed-off-by: Markos Chandras <mchandras@suse.de>