Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
|
|
Move bootstrap-scenarios.yml from installer/osa/playbooks/bootstrap-scenarios.yml
to playbooks/bootstrap-scenarios.yml as a common playbook.
So we can use this file to bootstarap k8s-* scenarios, instead of creating a new
file under installer/kubespray/playbooks/bootstrap-scenarios.yml
Change-Id: Ic31ee00e1a0863f48fb86298d7c00fa8420fa28a
Signed-off-by: wutianwei <wutianwei1@huawei.com>
|
|
This change brings the SHAs needed for os-odl-bgpvpn scenario
and will be tested using os-odl-nofeature scenario.
installer-type:osa
deploy-scenario:os-odl-nofeature
Change-Id: I3ab8be557d78710f47c8a2e558078e13eb70553c
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
Change-Id: Iae3f642bea54feae4c033b61e8ea4cfe759848ec
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
Using package_state:present should give our jobs better chance
to finish on time and perhaps improve the overall deployment times
even.
Change-Id: Ifa4e01318fe364a91c32f5326024d34c364e25c8
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
This change removes the variables that are not used in any of the
playbooks/roles from opnfv ansible vars.
Apart from that, all caps ansible vars replaced with lowercase ones
and impacted playbooks/roles are updated.
installer-type:osa
deploy-scenario:os-nosdn-nofeature
Change-Id: I99ebdc155b3903176ac5940b64cef0c0f3aa0f0d
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
In some cases the XCI development environment can be located behind a
corporate proxy resulting in a additional layer to consider to
configure. These changes pretend to include proxy support for all
linux distros in all the posible flavors.
Change-Id: Iab469268809ac471d09e244bb3ccd83de1a41b88
Signed-off-by: Victor Morales <victor.morales@intel.com>
|
|
The cleanup script has grown quite a bit over time and it now does more
things than cleaning up old 'bifrost' artifacts to move it to the global
files directory so it can be used by all installers.
Change-Id: Ibf70ff255f14e798216cedc71fb7c5f5476b964a
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* changes:
xci: infra: bifrost: Avoid installing Ansible twice
Add initial support for multiple infra deployers
|
|
We already install Ansible globally and we also install another version
of it in the bifrost venv. Even though the OSA Ansible may move faster
than the bifrost one, we normally pin both projects so we can move them
when they can work with the same Ansible version. As such, lets make the
deployment a little bit faster by simply not installing Ansible twice.
Change-Id: I121ef5979607b62e76300db1bc6d51fc27362d5b
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
|
|
|
|
bifrost is currently the only way to deploy the infrastructure but
in the future other solutions will be added so we need to do some
preparation for XCI integration.
Change-Id: I961dd42157c924d88747074ddba6a318f8b537ac
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
Change-Id: I0b8a6d9409d95033839bdc5b3fbe9d1cbbdf4b7c
Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>
|
|
1. Add the type: NodePort in dashboard service. the default is ClustIP,
which cannot access from outside.
2. Print the url ,user, password for user to access dashboard.
3. configure the kubectl CLI in opnfv host.
Change-Id: I6cb6e6f7547412139ece0c40a85de67a9edce0ef
Signed-off-by: wutianwei <wutianwei1@huawei.com>
|
|
OPNFV scenarios are forced to support at least two versions of OSA.
If there are API changes between two supported versions of OpenStack,
the testing code must have two versions. However, without knowing what
OpenStack version is deployed, it is impossible to automate the
decision of which testing code to use
Change-Id: I3ca8c6f33c05826a5d69417da774b7218bbd59e2
Signed-off-by: Manuel Buil <mbuil@suse.com>
|
|
|
|
|
|
|
|
|
|
The configure-targethost playbook is configuring all the OSA hosts so
we can simplify all that by introducing a new 'openstack' host group
with the controller and the compute nodes and configure all of them
in parallel.
Change-Id: I21f8709e7649b041575dab45fc4e070aa01e0a6f
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
There is no reference on the actual upstream problem so lets assume
this is fixed and drop the workaround we had locally.
Change-Id: I3f71ea2e6fdc67e342f014e572f74760a78d3816
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
The DEFAULT_XCI_TEST value wasn't checked and it could actually contain
anything leading to all sort of failures so we need to check it against
well known values.
Change-Id: Ib12c944adebfbcb3097b42af98d2bacefbd8374c
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
All clean VM operations should be performed within the root directory of
the releng-xci repo so make sure we are there.
Change-Id: I96f9d91439210faa1ac7f0e43db3992776293e9e
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
The XCI hosts may need some of the XCI env variables to perform
certain tasks so dump the XCI environment to /root/xci.env file and
make that available to every host on the deployment.
Change-Id: I286a01ca7da8ff206438c261798167f5e4daf7f2
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
|
|
There is probably no good reason anymore to be so strict with file
inclusions in the roles directory so drop the .gitignore file.
Change-Id: I84569c8c82c4aeb5da6c6e39e02ff514566e5213
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
The qemu-kvm package was duplicated for opensuse distro in the
start-new-vm.sh script. It doesn't affect its functionality but
reduce the list of additional packages to install.
Change-Id: Id5f24793295d7ccd9b19b64a07b24a1150a780aa
Signed-off-by: Victor Morales <victor.morales@intel.com>
|
|
1. Introduce the installer used to deploy kubernetes
2. Introduce XCI how to deploy the kubernetes
Change-Id: I052b4547d763d19b8d6136a48d4804443921b021
Signed-off-by: wutianwei <wutianwei1@huawei.com>
|
|
Change-Id: If53b51fc26d642afa39c5e618afcd23fab395acc
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
|
|
|
|
|
|
|
|
Pipefail should be sufficient to determine the failure so this
change gets rid of grepping the logs for failure and unreachable
to leave the evaluation to bash itself.
Change-Id: I0fcd6016ddc19eb11b3eb2402347032a11c5a32a
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
|
|
|
|
Those roles were too small and only used as part of the host
bootstrapping process. As such, we merge them into a common
'bootstrap-host' role which can be used to prepare the hosts
after the initial deployment
Change-Id: Ifc84cf40b98ced91b31aae699dc28e9642380550
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
Ansible gets upset if we use the same name for a host and a group so
add the OPNFV host to the deployment group. This fixes the following
warning:
[WARNING]: Found both group and host with same name: opnfv
Change-Id: Idbaff712d40e8234721332aee6d10d5ba44c62ce
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
'allow-pass-ansible-arguments-force-verify'
* changes:
xci: OSA: Fix warning about missing inventory file
xci: Pass the XCI_PATH variable to all Ansible calls
xci: Rename XCI_ANSIBLE_VERBOSITY to XCI_ANSIBLE_PARAMS
|
|
CI sometimes fails with the following error
"msg": "fatal: unable to access 'https://git.openstack.org/openstack/dragonflow/':
Failed to connect to git.openstack.org port 443: Connection timed out"
We assume that the upstream OpenStack mirrors may get very busy at times
or the connectivity between the CI and the OpenStack repos is not very
stable. As such, lets switch to github.com for the majority of OSA
repositories such as the roles and the services which may improve the
situation.
Change-Id: Ia4668d692077a785c76adeda128eb4cf9f4516a7
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
Pipefail should be sufficient to determine the failure so this
change gets rid of grepping the logs for failure and unreachable
to leave the evaluation to bash itself.
Change-Id: Ie928438c1503b086159276af4308f5549b58cb71
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
The VM nodes are named using OpenStack terminology but since we
now have Kubernetes scenario, it is appropriate to name the nodes
accordingly.
Apart from that, we normally log the version of OSA which is not
correct for kubernetes deployments. Logging Kubespray version would
be correct for this scenario.
Change-Id: I3964574c8592450f9fa3126f19e27bb78fd9d174
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
|
|
|
|
It's needed to remove .ansible directory which could be a leftovers by
some other ansible execution enviroment which would affect XCI
deployment.
Change-Id: Ic334ef1ca53878721762b23b238fe9a8aeefa0e0
Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>
|
|
There is no good reason why we should pin the Ansible version without
the ability to override it. OpenStack Ansible is doing a great work
testing Ansible releases as early as possible so we could benefit from
that work and use whatever Ansible our pinned OSA uses.
Change-Id: I4677dbefc68f7140417ece34d013ca9674baab43
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
Change-Id: Ie196d1df537d09f0f91e43ab5e0305a45d543815
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
Change-Id: I330bc036f901d4ba61bc94ee6e085cadf54b4d8b
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|