summaryrefslogtreecommitdiffstats
path: root/tests/integration
diff options
context:
space:
mode:
Diffstat (limited to 'tests/integration')
-rw-r--r--tests/integration/ansible.cfg415
-rw-r--r--tests/integration/group_vars/all2
-rw-r--r--tests/integration/hosts.default6
-rw-r--r--tests/integration/hosts.j221
-rw-r--r--tests/integration/hosts.sample83
-rw-r--r--tests/integration/reports/qpi-report.sample46
-rw-r--r--tests/integration/reports/system-info.sample36
-rw-r--r--tests/integration/run.yaml19
-rw-r--r--tests/integration/setup.yaml4
-rw-r--r--tests/integration/specs/compute.yaml36
-rw-r--r--tests/integration/ssh.cfg.j214
-rw-r--r--tests/integration/ssh.cfg.sample56
-rw-r--r--tests/integration/tasks/inxi.yaml44
-rw-r--r--tests/integration/tasks/openssl.yaml53
-rw-r--r--tests/integration/templates/qpi-report.j218
-rw-r--r--tests/integration/templates/system-info.j216
16 files changed, 23 insertions, 846 deletions
diff --git a/tests/integration/ansible.cfg b/tests/integration/ansible.cfg
index 85966e13..40e28bcf 100644
--- a/tests/integration/ansible.cfg
+++ b/tests/integration/ansible.cfg
@@ -13,163 +13,6 @@
inventory = ./hosts
library = ../../qtip/ansible_library/
-#module_utils = /usr/share/my_module_utils/
-#remote_tmp = ~/.ansible/tmp
-#local_tmp = ~/.ansible/tmp
-#forks = 5
-#poll_interval = 15
-#sudo_user = root
-#ask_sudo_pass = True
-#ask_pass = True
-#transport = smart
-#remote_port = 22
-#module_lang = C
-#module_set_locale = False
-
-# plays will gather facts by default, which contain information about
-# the remote system.
-#
-# smart - gather by default, but don't regather if already gathered
-# implicit - gather by default, turn off with gather_facts: False
-# explicit - do not gather by default, must say gather_facts: True
-#gathering = implicit
-
-# This only affects the gathering done by a play's gather_facts directive,
-# by default gathering retrieves all facts subsets
-# all - gather all subsets
-# network - gather min and network facts
-# hardware - gather hardware facts (longest facts to retrieve)
-# virtual - gather min and virtual facts
-# facter - import facts from facter
-# ohai - import facts from ohai
-# You can combine them using comma (ex: network,virtual)
-# You can negate them using ! (ex: !hardware,!facter,!ohai)
-# A minimal set of facts is always gathered.
-#gather_subset = all
-
-# some hardware related facts are collected
-# with a maximum timeout of 10 seconds. This
-# option lets you increase or decrease that
-# timeout to something more suitable for the
-# environment.
-# gather_timeout = 10
-
-# additional paths to search for roles in, colon separated
-#roles_path = /etc/ansible/roles
-
-# uncomment this to disable SSH key host checking
-#host_key_checking = False
-
-# change the default callback
-#stdout_callback = skippy
-# enable additional callbacks
-#callback_whitelist = timer, mail
-
-# Determine whether includes in tasks and handlers are "static" by
-# default. As of 2.0, includes are dynamic by default. Setting these
-# values to True will make includes behave more like they did in the
-# 1.x versions.
-#task_includes_static = True
-#handler_includes_static = True
-
-# Controls if a missing handler for a notification event is an error or a warning
-#error_on_missing_handler = True
-
-# change this for alternative sudo implementations
-#sudo_exe = sudo
-
-# What flags to pass to sudo
-# WARNING: leaving out the defaults might create unexpected behaviours
-#sudo_flags = -H -S -n
-
-# SSH timeout
-#timeout = 10
-
-# default user to use for playbooks if user is not specified
-# (/usr/bin/ansible will use current user as default)
-#remote_user = root
-
-# logging is off by default unless this path is defined
-# if so defined, consider logrotate
-#log_path = /var/log/ansible.log
-
-# default module name for /usr/bin/ansible
-#module_name = command
-
-# use this shell for commands executed under sudo
-# you may need to change this to bin/bash in rare instances
-# if sudo is constrained
-#executable = /bin/sh
-
-# if inventory variables overlap, does the higher precedence one win
-# or are hash values merged together? The default is 'replace' but
-# this can also be set to 'merge'.
-#hash_behaviour = replace
-
-# by default, variables from roles will be visible in the global variable
-# scope. To prevent this, the following option can be enabled, and only
-# tasks and handlers within the role will see the variables there
-#private_role_vars = yes
-
-# list any Jinja2 extensions to enable here:
-#jinja2_extensions = jinja2.ext.do,jinja2.ext.i18n
-
-# if set, always use this private key file for authentication, same as
-# if passing --private-key to ansible or ansible-playbook
-#private_key_file = /path/to/file
-
-# If set, configures the path to the Vault password file as an alternative to
-# specifying --vault-password-file on the command line.
-#vault_password_file = /path/to/vault_password_file
-
-# format of string {{ ansible_managed }} available within Jinja2
-# templates indicates to users editing templates files will be replaced.
-# replacing {file}, {host} and {uid} and strftime codes with proper values.
-#ansible_managed = Ansible managed: {file} modified on %Y-%m-%d %H:%M:%S by {uid} on {host}
-# {file}, {host}, {uid}, and the timestamp can all interfere with idempotence
-# in some situations so the default is a static string:
-#ansible_managed = Ansible managed
-
-# by default, ansible-playbook will display "Skipping [host]" if it determines a task
-# should not be run on a host. Set this to "False" if you don't want to see these "Skipping"
-# messages. NOTE: the task header will still be shown regardless of whether or not the
-# task is skipped.
-#display_skipped_hosts = True
-
-# by default, if a task in a playbook does not include a name: field then
-# ansible-playbook will construct a header that includes the task's action but
-# not the task's args. This is a security feature because ansible cannot know
-# if the *module* considers an argument to be no_log at the time that the
-# header is printed. If your environment doesn't have a problem securing
-# stdout from ansible-playbook (or you have manually specified no_log in your
-# playbook on all of the tasks where you have secret information) then you can
-# safely set this to True to get more informative messages.
-#display_args_to_stdout = False
-
-# by default (as of 1.3), Ansible will raise errors when attempting to dereference
-# Jinja2 variables that are not set in templates or action lines. Uncomment this line
-# to revert the behavior to pre-1.3.
-#error_on_undefined_vars = False
-
-# by default (as of 1.6), Ansible may display warnings based on the configuration of the
-# system running ansible itself. This may include warnings about 3rd party packages or
-# other conditions that should be resolved if possible.
-# to disable these warnings, set the following value to False:
-#system_warnings = True
-
-# by default (as of 1.4), Ansible may display deprecation warnings for language
-# features that should no longer be used and will be removed in future versions.
-# to disable these warnings, set the following value to False:
-#deprecation_warnings = True
-
-# (as of 1.8), Ansible can optionally warn when usage of the shell and
-# command module appear to be simplified by using a default Ansible module
-# instead. These warnings can be silenced by adjusting the following
-# setting or adding warn=yes or warn=no to the end of the command line
-# parameter string. This will for example suggest using the git module
-# instead of shelling out to the git command.
-# command_warnings = False
-
# set plugin path directories here, separate with colons
action_plugins = ../../qtip/ansible_library/plugins/action
@@ -183,261 +26,3 @@ filter_plugins = ../../qtip/ansible_library/plugins/filter
#test_plugins = /usr/share/ansible/plugins/test
#terminal_plugins = /usr/share/ansible/plugins/terminal
#strategy_plugins = /usr/share/ansible/plugins/strategy
-
-
-# by default, ansible will use the 'linear' strategy but you may want to try
-# another one
-#strategy = free
-
-# by default callbacks are not loaded for /bin/ansible, enable this if you
-# want, for example, a notification or logging callback to also apply to
-# /bin/ansible runs
-#bin_ansible_callbacks = False
-
-
-# don't like cows? that's unfortunate.
-# set to 1 if you don't want cowsay support or export ANSIBLE_NOCOWS=1
-#nocows = 1
-
-# set which cowsay stencil you'd like to use by default. When set to 'random',
-# a random stencil will be selected for each task. The selection will be filtered
-# against the `cow_whitelist` option below.
-#cow_selection = default
-#cow_selection = random
-
-# when using the 'random' option for cowsay, stencils will be restricted to this list.
-# it should be formatted as a comma-separated list with no spaces between names.
-# NOTE: line continuations here are for formatting purposes only, as the INI parser
-# in python does not support them.
-#cow_whitelist=bud-frogs,bunny,cheese,daemon,default,dragon,elephant-in-snake,elephant,eyes,\
-# hellokitty,kitty,luke-koala,meow,milk,moofasa,moose,ren,sheep,small,stegosaurus,\
-# stimpy,supermilker,three-eyes,turkey,turtle,tux,udder,vader-koala,vader,www
-
-# don't like colors either?
-# set to 1 if you don't want colors, or export ANSIBLE_NOCOLOR=1
-#nocolor = 1
-
-# if set to a persistent type (not 'memory', for example 'redis') fact values
-# from previous runs in Ansible will be stored. This may be useful when
-# wanting to use, for example, IP information from one group of servers
-# without having to talk to them in the same playbook run to get their
-# current IP information.
-#fact_caching = memory
-
-
-# retry files
-# When a playbook fails by default a .retry file will be created in ~/
-# You can disable this feature by setting retry_files_enabled to False
-# and you can change the location of the files by setting retry_files_save_path
-
-#retry_files_enabled = False
-#retry_files_save_path = ~/.ansible-retry
-
-# squash actions
-# Ansible can optimise actions that call modules with list parameters
-# when looping. Instead of calling the module once per with_ item, the
-# module is called once with all items at once. Currently this only works
-# under limited circumstances, and only with parameters named 'name'.
-#squash_actions = apk,apt,dnf,homebrew,pacman,pkgng,yum,zypper
-
-# prevents logging of task data, off by default
-#no_log = False
-
-# prevents logging of tasks, but only on the targets, data is still logged on the master/controller
-#no_target_syslog = False
-
-# controls whether Ansible will raise an error or warning if a task has no
-# choice but to create world readable temporary files to execute a module on
-# the remote machine. This option is False by default for security. Users may
-# turn this on to have behaviour more like Ansible prior to 2.1.x. See
-# https://docs.ansible.com/ansible/become.html#becoming-an-unprivileged-user
-# for more secure ways to fix this than enabling this option.
-#allow_world_readable_tmpfiles = False
-
-# controls the compression level of variables sent to
-# worker processes. At the default of 0, no compression
-# is used. This value must be an integer from 0 to 9.
-#var_compression_level = 9
-
-# controls what compression method is used for new-style ansible modules when
-# they are sent to the remote system. The compression types depend on having
-# support compiled into both the controller's python and the client's python.
-# The names should match with the python Zipfile compression types:
-# * ZIP_STORED (no compression. available everywhere)
-# * ZIP_DEFLATED (uses zlib, the default)
-# These values may be set per host via the ansible_module_compression inventory
-# variable
-#module_compression = 'ZIP_DEFLATED'
-
-# This controls the cutoff point (in bytes) on --diff for files
-# set to 0 for unlimited (RAM may suffer!).
-#max_diff_size = 1048576
-
-# This controls how ansible handles multiple --tags and --skip-tags arguments
-# on the CLI. If this is True then multiple arguments are merged together. If
-# it is False, then the last specified argument is used and the others are ignored.
-#merge_multiple_cli_flags = False
-
-# Controls showing custom stats at the end, off by default
-#show_custom_stats = True
-
-# Controlls which files to ignore when using a directory as inventory with
-# possibly multiple sources (both static and dynamic)
-#inventory_ignore_extensions = ~, .orig, .bak, .ini, .cfg, .retry, .pyc, .pyo
-
-# This family of modules use an alternative execution path optimized for network appliances
-# only update this setting if you know how this works, otherwise it can break module execution
-#network_group_modules=['eos', 'nxos', 'ios', 'iosxr', 'junos', 'vyos']
-
-# This keeps facts from polluting the main namespace as variables.
-# Setting to True keeps them under the ansible_facts namespace, the default is False
-#restrict_facts_namespace: True
-
-[privilege_escalation]
-#become=True
-#become_method=sudo
-#become_user=root
-#become_ask_pass=False
-
-[paramiko_connection]
-
-# uncomment this line to cause the paramiko connection plugin to not record new host
-# keys encountered. Increases performance on new host additions. Setting works independently of the
-# host key checking setting above.
-#record_host_keys=False
-
-# by default, Ansible requests a pseudo-terminal for commands executed under sudo. Uncomment this
-# line to disable this behaviour.
-#pty=False
-
-# paramiko will default to looking for SSH keys initially when trying to
-# authenticate to remote devices. This is a problem for some network devices
-# that close the connection after a key failure. Uncomment this line to
-# disable the Paramiko look for keys function
-#look_for_keys = False
-
-# When using persistent connections with Paramiko, the connection runs in a
-# background process. If the host doesn't already have a valid SSH key, by
-# default Ansible will prompt to add the host key. This will cause connections
-# running in background processes to fail. Uncomment this line to have
-# Paramiko automatically add host keys.
-#host_key_auto_add = True
-
-[ssh_connection]
-
-# ssh arguments to use
-# Leaving off ControlPersist will result in poor performance, so use
-# paramiko on older platforms rather than removing it, -C controls compression use
-#ssh_args = -C -o ControlMaster=auto -o ControlPersist=60s
-
-# The base directory for the ControlPath sockets.
-# This is the "%(directory)s" in the control_path option
-#
-# Example:
-# control_path_dir = /tmp/.ansible/cp
-#control_path_dir = ~/.ansible/cp
-
-# The path to use for the ControlPath sockets. This defaults to a hashed string of the hostname,
-# port and username (empty string in the config). The hash mitigates a common problem users
-# found with long hostames and the conventional %(directory)s/ansible-ssh-%%h-%%p-%%r format.
-# In those cases, a "too long for Unix domain socket" ssh error would occur.
-#
-# Example:
-# control_path = %(directory)s/%%h-%%r
-#control_path =
-
-# Enabling pipelining reduces the number of SSH operations required to
-# execute a module on the remote server. This can result in a significant
-# performance improvement when enabled, however when using "sudo:" you must
-# first disable 'requiretty' in /etc/sudoers
-#
-# By default, this option is disabled to preserve compatibility with
-# sudoers configurations that have requiretty (the default on many distros).
-#
-#pipelining = False
-
-# Control the mechanism for transferring files (old)
-# * smart = try sftp and then try scp [default]
-# * True = use scp only
-# * False = use sftp only
-#scp_if_ssh = smart
-
-# Control the mechanism for transferring files (new)
-# If set, this will override the scp_if_ssh option
-# * sftp = use sftp to transfer files
-# * scp = use scp to transfer files
-# * piped = use 'dd' over SSH to transfer files
-# * smart = try sftp, scp, and piped, in that order [default]
-#transfer_method = smart
-
-# if False, sftp will not use batch mode to transfer files. This may cause some
-# types of file transfer failures impossible to catch however, and should
-# only be disabled if your sftp version has problems with batch mode
-#sftp_batch_mode = False
-
-[persistent_connection]
-
-# Configures the persistent connection timeout value in seconds. This value is
-# how long the persistent connection will remain idle before it is destroyed.
-# If the connection doesn't receive a request before the timeout value
-# expires, the connection is shutdown. The default value is 30 seconds.
-#connect_timeout = 30
-
-# Configures the persistent connection retries. This value configures the
-# number of attempts the ansible-connection will make when trying to connect
-# to the local domain socket. The default value is 30.
-#connect_retries = 30
-
-# Configures the amount of time in seconds to wait between connection attempts
-# to the local unix domain socket. This value works in conjunction with the
-# connect_retries value to define how long to try to connect to the local
-# domain socket when setting up a persistent connection. The default value is
-# 1 second.
-#connect_interval = 1
-
-[accelerate]
-#accelerate_port = 5099
-#accelerate_timeout = 30
-#accelerate_connect_timeout = 5.0
-
-# The daemon timeout is measured in minutes. This time is measured
-# from the last activity to the accelerate daemon.
-#accelerate_daemon_timeout = 30
-
-# If set to yes, accelerate_multi_key will allow multiple
-# private keys to be uploaded to it, though each user must
-# have access to the system via SSH to add a new key. The default
-# is "no".
-#accelerate_multi_key = yes
-
-[selinux]
-# file systems that require special treatment when dealing with security context
-# the default behaviour that copies the existing context or uses the user default
-# needs to be changed to use the file system dependent context.
-#special_context_filesystems=nfs,vboxsf,fuse,ramfs,9p
-
-# Set this to yes to allow libvirt_lxc connections to work without SELinux.
-#libvirt_lxc_noseclabel = yes
-
-[colors]
-#highlight = white
-#verbose = blue
-#warn = bright purple
-#error = red
-#debug = dark gray
-#deprecate = purple
-#skip = cyan
-#unreachable = red
-#ok = green
-#changed = yellow
-#diff_add = green
-#diff_remove = red
-#diff_lines = cyan
-
-
-[diff]
-# Always print diff when running ( same as always running with -D/--diff )
-# always = no
-
-# Set how many context lines to show in diff
-# context = 3
diff --git a/tests/integration/group_vars/all b/tests/integration/group_vars/all
new file mode 100644
index 00000000..7c56f570
--- /dev/null
+++ b/tests/integration/group_vars/all
@@ -0,0 +1,2 @@
+qtip_resources: ../../resources
+qtip_reports: ./reports
diff --git a/tests/integration/hosts.default b/tests/integration/hosts.default
new file mode 100644
index 00000000..9b91eea6
--- /dev/null
+++ b/tests/integration/hosts.default
@@ -0,0 +1,6 @@
+[fuel-master]
+fuel-master
+
+[local]
+localhost ansible_connection=local
+
diff --git a/tests/integration/hosts.j2 b/tests/integration/hosts.j2
deleted file mode 100644
index 868a4e57..00000000
--- a/tests/integration/hosts.j2
+++ /dev/null
@@ -1,21 +0,0 @@
-[fuel-master]
-fuel-master
-
-[local]
-localhost ansible_connection=local
-
-[fuel-groups:children]
-{% for group in hosts|sort %}
-{{ group }}
-{% endfor %}
-
-[fuel-groups:vars]
-ansible_ssh_common_args=-F ./ssh.cfg
-
-{% for group in hosts|sort %}
-[{{ group }}]
-{% for host in hosts[group]|sort %}
-{{ host }}
-{% endfor %}
-
-{% endfor %}
diff --git a/tests/integration/hosts.sample b/tests/integration/hosts.sample
deleted file mode 100644
index e37d38ec..00000000
--- a/tests/integration/hosts.sample
+++ /dev/null
@@ -1,83 +0,0 @@
-[fuel-master]
-fuel-master
-
-[local]
-localhost ansible_connection=local
-
-[fuel-groups:children]
-ceph-osd
-cluster-1
-compute
-controller
-hw-zte-servers
-mongo
-node-1
-node-2
-node-3
-node-4
-node-5
-node-6
-node-7
-
-[fuel-groups:vars]
-ansible_ssh_common_args=-F ./ssh.cfg
-
-[ceph-osd]
-node-2
-node-4
-node-6
-node-7
-
-[cluster-1]
-node-1
-node-2
-node-3
-node-4
-node-5
-node-6
-node-7
-
-[compute]
-node-2
-node-4
-node-6
-node-7
-
-[controller]
-node-1
-node-3
-node-5
-
-[hw-zte-servers]
-node-1
-node-2
-node-3
-node-4
-node-5
-node-6
-node-7
-
-[mongo]
-node-1
-
-[node-1]
-node-1
-
-[node-2]
-node-2
-
-[node-3]
-node-3
-
-[node-4]
-node-4
-
-[node-5]
-node-5
-
-[node-6]
-node-6
-
-[node-7]
-node-7
-
diff --git a/tests/integration/reports/qpi-report.sample b/tests/integration/reports/qpi-report.sample
deleted file mode 100644
index cb9e9308..00000000
--- a/tests/integration/reports/qpi-report.sample
+++ /dev/null
@@ -1,46 +0,0 @@
-Sample QPI Report
-
-Host: node-26
-QPI: 1.41147857985
-Spec: compute
-
-- SSL: 1.41147857985
- - ssl_rsa: 1.41147857985
- - rsa_sign_512: 1.25261808935
- - rsa_verify_512: 1.33973907536
- - rsa_sign_1024: 1.31933223495
- - rsa_verify_1024: 1.46972456907
- - rsa_sign_2048: 1.8615470852
- - rsa_verify_2048: 1.3683903146
- - rsa_sign_4096: 1.31537708129
- - rsa_verify_4096: 1.36510018898
-
-Host: node-28
-QPI: 1.28082308651
-Spec: compute
-
-- SSL: 1.28082308651
- - ssl_rsa: 1.28082308651
- - rsa_sign_512: 1.13628081136
- - rsa_verify_512: 1.24882238433
- - rsa_sign_1024: 1.16100601465
- - rsa_verify_1024: 1.33382620817
- - rsa_sign_2048: 1.72057174888
- - rsa_verify_2048: 1.23917640038
- - rsa_sign_4096: 1.16846229187
- - rsa_verify_4096: 1.2384388324
-
-Host: node-27
-QPI: 1.41542492777
-Spec: compute
-
-- SSL: 1.41542492777
- - ssl_rsa: 1.41542492777
- - rsa_sign_512: 1.25857845591
- - rsa_verify_512: 1.34193319426
- - rsa_sign_1024: 1.32097981222
- - rsa_verify_1024: 1.4807103336
- - rsa_sign_2048: 1.86378923767
- - rsa_verify_2048: 1.36600306932
- - rsa_sign_4096: 1.31635651322
- - rsa_verify_4096: 1.37504880601
diff --git a/tests/integration/reports/system-info.sample b/tests/integration/reports/system-info.sample
deleted file mode 100644
index 371243e2..00000000
--- a/tests/integration/reports/system-info.sample
+++ /dev/null
@@ -1,36 +0,0 @@
-System Information from inxi
-============================
-
-node-26
------------------------------
-
-CPU Brand.................2 Deca core Intel Xeon E5-2650 v3s (-HT-MCP-SMP-) speed/max: 1200/3000 MHz
-Disk............................................................................1200.3GB (0.8% used)
-Host Name.........................................................................node-26.zte.com.cn
-Kernel..............................................................4.4.0-66-generic x86_64 (64 bit)
-Memory.............................................................................3836.1/128524.1MB
-Operating System.................................................................Ubuntu 16.04 xenial
-Product......................................................................................EC600G3
-
-node-28
------------------------------
-
-CPU Brand.................2 Deca core Intel Xeon E5-2650 v3s (-HT-MCP-SMP-) speed/max: 1200/3000 MHz
-Disk............................................................................1200.3GB (0.8% used)
-Host Name.........................................................................node-28.zte.com.cn
-Kernel..............................................................4.4.0-66-generic x86_64 (64 bit)
-Memory.............................................................................3826.6/128524.1MB
-Operating System.................................................................Ubuntu 16.04 xenial
-Product......................................................................................EC600G3
-
-node-27
------------------------------
-
-CPU Brand.................2 Deca core Intel Xeon E5-2650 v3s (-HT-MCP-SMP-) speed/max: 1200/3000 MHz
-Disk............................................................................1200.3GB (0.8% used)
-Host Name.........................................................................node-27.zte.com.cn
-Kernel..............................................................4.4.0-66-generic x86_64 (64 bit)
-Memory.............................................................................3922.4/128524.1MB
-Operating System.................................................................Ubuntu 16.04 xenial
-Product......................................................................................EC600G3
-
diff --git a/tests/integration/run.yaml b/tests/integration/run.yaml
index 704ce831..86b36284 100644
--- a/tests/integration/run.yaml
+++ b/tests/integration/run.yaml
@@ -16,11 +16,10 @@
tasks:
- name: check ssh connection
ping:
- # collect system information
- name: collect system information
- include: tasks/inxi.yaml
+ include: "{{ qtip_resources }}/metric/inxi.yaml"
- name: ssl metrics
- include: tasks/openssl.yaml
+ include: "{{ qtip_resources }}/metric/openssl.yaml"
tags: [ssl]
- hosts: compute
@@ -29,7 +28,7 @@
calculate:
metrics:
ssl_rsa: "{{ openssl_rsa_metrics }}"
- spec: specs/compute.yaml
+ spec: "{{ qtip_resources }}/QPI/compute.yaml"
register: qpi_result
delegate_to: localhost
tags: [calculate]
@@ -37,9 +36,17 @@
# Generate and publish report
- hosts: local
tasks:
+ - name: create report folder
+ file:
+ path: "{{ qtip_reports }}"
+ state: directory
- name: create system information report
- template: src=templates/system-info.j2 dest=reports/system-info
+ template:
+ src: "{{ qtip_resources }}/template/system-info.j2"
+ dest: "{{ qtip_reports }}/system-info"
- name: create qpi report
- template: src=templates/qpi-report.j2 dest=reports/qpi-report
+ template:
+ src: "{{ qtip_resources }}/template/qpi-report.j2"
+ dest: "{{ qtip_reports }}/qpi-report"
tags: [report]
# TODO(yujunz) push test result to testapi
diff --git a/tests/integration/setup.yaml b/tests/integration/setup.yaml
index 784d6cc5..4af9a129 100644
--- a/tests/integration/setup.yaml
+++ b/tests/integration/setup.yaml
@@ -14,8 +14,8 @@
- name: collect facts of fuel hosts
fuel:
- name: update inventory file
- template: src=./hosts.j2 dest=./hosts
+ template: src={{ qtip_resources }}/template/hosts.j2 dest=./hosts
delegate_to: localhost
- name: update ssh.cfg file
- template: src=./ssh.cfg.j2 dest=./ssh.cfg
+ template: src={{ qtip_resources }}/template/ssh.cfg.j2 dest=./ssh.cfg
delegate_to: localhost
diff --git a/tests/integration/specs/compute.yaml b/tests/integration/specs/compute.yaml
deleted file mode 100644
index 736aef22..00000000
--- a/tests/integration/specs/compute.yaml
+++ /dev/null
@@ -1,36 +0,0 @@
-##############################################################################
-# Copyright (c) 2016 ZTE Corporation and others.
-#
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-name: compute
-description: QTIP Performance Index of compute
-formula: weighted arithmetic mean
-sections: # split based on different application
- - name: SSL
- description: cryptography and SSL/TLS performance
- formula: geometric mean
- metrics:
- - name: ssl_rsa
- formual: geometric mean
- workloads:
- - name: rsa_sign_512
- description: RSA signature 512 bits
- baseline: 14982.3
- - name: rsa_verify_512
- baseline: 180619.2
- - name: rsa_sign_1024
- baseline: 5037.7
- - name: rsa_verify_1024
- baseline: 67359.9
- - name: rsa_sign_2048
- baseline: 713.6
- - name: rsa_verify_2048
- baseline: 23458.0
- - name: rsa_sign_4096
- baseline: 102.1
- - name: rsa_verify_4096
- baseline: 6402.9
diff --git a/tests/integration/ssh.cfg.j2 b/tests/integration/ssh.cfg.j2
deleted file mode 100644
index 2fe049e2..00000000
--- a/tests/integration/ssh.cfg.j2
+++ /dev/null
@@ -1,14 +0,0 @@
-# Connect to target node through jump host
-#
-# OpenSSH 7.3:
-# ProxyJump jumphost
-# before OpenSSH 7.3
-# ProxyCommand ssh -o 'ForwardAgent yes' jumphost 'ssh-add && nc %h %p'
-
-{% for (name, host) in hosts_meta.items() %}
-Host {{ name }}
- HostName {{ host.ansible_ssh_host }}
- User root
- ProxyCommand ssh -o 'ForwardAgent yes' fuel-master 'ssh-add && nc %h %p'
-
-{% endfor %}
diff --git a/tests/integration/ssh.cfg.sample b/tests/integration/ssh.cfg.sample
deleted file mode 100644
index efa45ab6..00000000
--- a/tests/integration/ssh.cfg.sample
+++ /dev/null
@@ -1,56 +0,0 @@
-Host node-5
- HostName 10.20.5.12
- User root
- # Use `ProxyCommand` for OpenSSH before 7.3
- ProxyCommand ssh -o 'ForwardAgent yes' fuel-master 'ssh-add && nc %h %p'
- # `ProxyJump` is available since OpenSSH 7.3
- # ProxyJump fuel-master
-
-Host node-4
- HostName 10.20.5.14
- User root
- # Use `ProxyCommand` for OpenSSH before 7.3
- ProxyCommand ssh -o 'ForwardAgent yes' fuel-master 'ssh-add && nc %h %p'
- # `ProxyJump` is available since OpenSSH 7.3
- # ProxyJump fuel-master
-
-Host node-7
- HostName 10.20.5.15
- User root
- # Use `ProxyCommand` for OpenSSH before 7.3
- ProxyCommand ssh -o 'ForwardAgent yes' fuel-master 'ssh-add && nc %h %p'
- # `ProxyJump` is available since OpenSSH 7.3
- # ProxyJump fuel-master
-
-Host node-6
- HostName 10.20.5.16
- User root
- # Use `ProxyCommand` for OpenSSH before 7.3
- ProxyCommand ssh -o 'ForwardAgent yes' fuel-master 'ssh-add && nc %h %p'
- # `ProxyJump` is available since OpenSSH 7.3
- # ProxyJump fuel-master
-
-Host node-1
- HostName 10.20.5.10
- User root
- # Use `ProxyCommand` for OpenSSH before 7.3
- ProxyCommand ssh -o 'ForwardAgent yes' fuel-master 'ssh-add && nc %h %p'
- # `ProxyJump` is available since OpenSSH 7.3
- # ProxyJump fuel-master
-
-Host node-3
- HostName 10.20.5.11
- User root
- # Use `ProxyCommand` for OpenSSH before 7.3
- ProxyCommand ssh -o 'ForwardAgent yes' fuel-master 'ssh-add && nc %h %p'
- # `ProxyJump` is available since OpenSSH 7.3
- # ProxyJump fuel-master
-
-Host node-2
- HostName 10.20.5.13
- User root
- # Use `ProxyCommand` for OpenSSH before 7.3
- ProxyCommand ssh -o 'ForwardAgent yes' fuel-master 'ssh-add && nc %h %p'
- # `ProxyJump` is available since OpenSSH 7.3
- # ProxyJump fuel-master
-
diff --git a/tests/integration/tasks/inxi.yaml b/tests/integration/tasks/inxi.yaml
deleted file mode 100644
index 47eb2e73..00000000
--- a/tests/integration/tasks/inxi.yaml
+++ /dev/null
@@ -1,44 +0,0 @@
-##############################################################################
-# Copyright (c) 2017 ZTE Corporation and others.
-#
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-- name: install inxi - Command line system information script for console and IRC
- package:
- name: inxi
- state: present
-
-- name: check hardware information with inxi
- command: inxi -b -c0 -n
- register: inxi_out
-
-# TODO(yujunz) normalize system information, test condition and performance metrics for future data mining
-# e.g. convert "2 Deca core Intel Xeon E5-2650 v3s (-HT-MCP-SMP-) speed/max: 1200/3000 MHz" to
-# ---
-# processor:
-# id:
-# vendor: Intel
-# product_family: Xeon
-# processor_number: E5-2650 v3s
-# number_of_cores: 2
-# number_of_threads: None # set `None` when data is not available
-# base_frequency_mhz: 1200
-# max_turbo_frequency_mhz: 3000
-# cache_mb: None
-- name: collect system information from inxi
- collect:
- string: "{{ inxi_out.stdout }}"
- patterns:
- - '.+\s+Host:\s+(?P<hostname>.+)\sKernel'
- - '.+\sMemory:\s+(?P<memory>.+MB)\s'
- - '^CPU\(s\):\s+(?P<cpu>.+)'
- - '.+\sDistro:\s+(?P<os>.+)'
- - '.+\sKernel:\s+(?P<kernel>.+)\sConsole'
- - '.+\s+HDD Total Size:\s+(?P<disk>.+)\s'
- - '.+\sproduct:\s+(?P<product>.+)\sv'
- dump: 'inix.log'
- register: system_info
diff --git a/tests/integration/tasks/openssl.yaml b/tests/integration/tasks/openssl.yaml
deleted file mode 100644
index 0e70913e..00000000
--- a/tests/integration/tasks/openssl.yaml
+++ /dev/null
@@ -1,53 +0,0 @@
-##############################################################################
-# Copyright (c) 2017 ZTE Corporation and others.
-#
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-- name: install openssl - Cryptography and SSL/TLS Toolkit
- package:
- name: openssl
- state: present
-
-- name: RSA signatures speed measurement
- command: openssl speed rsa
- register: openssl_rsa_log
-
-#- name: AES speed measurement
-# command: openssl speed -evp aes-128-cbc
-# register: openssl_aes_log
-
-- name: collect ssl metrics from openssl
- collect:
- string: "{{ openssl_rsa_log.stdout }}"
- patterns:
- - |-
- ^rsa\s+512\sbits\s.+\s+
- ?(?P<rsa_sign_512>\d+\.\d)\s+
- ?(?P<rsa_verify_512>\d+\.\d)$
- - |-
- ^rsa\s+1024\sbits\s.+\s+
- ?(?P<rsa_sign_1024>\d+\.\d)\s+
- ?(?P<rsa_verify_1024>\d+\.\d)$
- - |-
- ^rsa\s+2048\sbits\s.+\s+
- ?(?P<rsa_sign_2048>\d+\.\d)\s+
- ?(?P<rsa_verify_2048>\d+\.\d)$
- - |-
- ^rsa\s+4096\sbits\s.+\s+
- ?(?P<rsa_sign_4096>\d+\.\d)\s+
- ?(?P<rsa_verify_4096>\d+\.\d)$
- register: openssl_rsa_metrics
-
-# - filename: AES-128-CBC_dump
-# grep:
-# - |-
-# ^aes-128-cbc\s+
-# ?(?P<aes_128_cbc_16_bytes>\d+\.\w+)\s+
-# ?(?P<aes_128_cbc_64_bytes>\d+\.\w+)\s+
-# ?(?P<aes_128_cbc_256_bytes>\d+\.\w+)\s+
-# ?(?P<aes_128_cbc_1024_bytes>\d+\.\w+)\s+
-# ?(?P<aes_128_cbc_8192_bytes>\d+\.\w+)$
diff --git a/tests/integration/templates/qpi-report.j2 b/tests/integration/templates/qpi-report.j2
deleted file mode 100644
index afe9bfb8..00000000
--- a/tests/integration/templates/qpi-report.j2
+++ /dev/null
@@ -1,18 +0,0 @@
-Sample QPI Report
-{% for host in groups['compute'] %}
-{% set qpi_result = hostvars[host].qpi_result %}
-
-Host: {{ hostvars[host].ansible_hostname }}
-QPI: {{ qpi_result.score }}
-Spec: {{ qpi_result.spec.name }}
-
-{% for section in qpi_result.section_results %}
-- {{ section.name }}: {{ section.result.score }}
-{% for metric in section.result.metric_results %}
- - {{ metric.name }}: {{ metric.result.score }}
-{% for workload in metric.result.workload_results %}
- - {{ workload.name }}: {{ workload.score }}
-{% endfor %}
-{% endfor %}
-{% endfor %}
-{% endfor %}
diff --git a/tests/integration/templates/system-info.j2 b/tests/integration/templates/system-info.j2
deleted file mode 100644
index 305a2af2..00000000
--- a/tests/integration/templates/system-info.j2
+++ /dev/null
@@ -1,16 +0,0 @@
-System Information from inxi
-============================
-
-{% for host in groups['compute'] %}
-{{ hostvars[host].ansible_hostname }}
------------------------------
-
-{{ ('CPU Brand', hostvars[host].system_info.cpu[0])|justify }}
-{{ ('Disk', hostvars[host].system_info.disk[0])|justify }}
-{{ ('Host Name', hostvars[host].system_info.hostname[0])|justify }}
-{{ ('Kernel', hostvars[host].system_info.kernel[0])|justify }}
-{{ ('Memory', hostvars[host].system_info.memory[0])|justify }}
-{{ ('Operating System', hostvars[host].system_info.os[0])|justify }}
-{{ ('Product', hostvars[host].system_info.product[0])|justify }}
-
-{% endfor %}