2 files changed, 150 insertions, 0 deletions
diff --git a/docs/release/configguide/configuration.rst b/docs/release/configguide/configuration.rst
new file mode 100644
index 00000000..78e96492
--- /dev/null
+++ b/docs/release/configguide/configuration.rst
@@ -0,0 +1,136 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) 2015 Dell Inc.
+.. (c) 2016 ZTE Corp.
+
+*************
+Configuration
+*************
+
+QTIP currently supports by using a Docker image. Detailed steps
+about setting up QTIP can be found below.
+
+To use QTIP you should have access to an OpenStack environment, with at least
+Nova, Neutron, Glance, Keystone and Heat installed. Add a brief introduction
+to configure OPNFV with this specific installer
+
+
+Installing QTIP using Docker
+============================
+
+QTIP has a Docker images on the docker hub. Pulling opnfv/qtip docker image
+from docker hub:
+::
+
+  docker pull opnfv/qtip
+
+Verify that opnfv/qtip has been downloaded. It should be listed as an image by
+running the following command.
+::
+
+  docker images
+
+Make dir to store the QTIP image which will be used to create vm in cloud.
+::
+
+  mkdir $HOME/imgstore
+
+Run and enter the Docker instance:
+::
+  envs="INSTALLER_TYPE={INSTALLER_TYPE} -e INSTALLER_IP={INSTALLER_IP}
+-e NODE_NAME={NODE_NAME}"
+  docker run --name qtip -id -e $envs -v "$HOME/imgstore:/home/opnfv/imgstore" opnfv/qtip
+  docker exec -i -t qtip /bin/bash
+
+Now you are in the container and QTIP can be found in the  /repos/qtip and can
+be navigated to using the following command.
+::
+
+  cd repos/qtip
+
+
+OpenStack parameters and credentials
+====================================
+
+
+Environment variables
+---------------------
+
+Before running QTIP it is necessary to export OpenStack environment variables
+from the OpenStack *openrc* file. This can be done by running the following
+command.
+::
+
+  source scripts/get_env_info.sh -n {INSTALLER_TYPE} -i {INSTALLER_IP}
+  source opnfv-creds.sh
+
+This provides a ``opnfv-creds.sh`` file which can be sources to get the
+environment variables.
+
+
+QTIP  default key pair
+----------------------
+
+QTIP uses a SSH key pair to connect to the guest image. You should generate key pair
+before running QTIP test. And put key pair in the ``config/`` directory.
+::
+
+  ssh-keygen -t rsa -N "" -f config/QtipKey -q
+
+
+
+Hardware configuration
+----------------------
+
+Qtip does not have specific hardware requriements, and it can runs over any
+OPNFV installer.
+
+
+Jumphost configuration
+----------------------
+
+Installer Docker on Jumphost, which is used for running Qtip image.
+
+The first step is to install docker:
+::
+
+  sudo apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80
+  --recv-keys 58118E89F3A912897C070ADBF76221572C52609D
+
+
+Add an entry for your Ubuntu operating system:
+::
+
+  Open the /etc/apt/sources.list.d/docker.list file in your favorite editor.
+
+If the file doesn’t exist, create it.
+
+Remove any existing entries.
+
+Add an entry for your Ubuntu operating system.
+
+On Ubuntu Trusty 14.04 (LTS)
+::
+
+  deb https://apt.dockerproject.org/repo ubuntu-trusty main
+
+Update the package manager
+::
+
+  sudo apt-get update
+
+Install Docker:
+::
+
+  sudo apt-get install docker-engine
+
+Starting Docker Daemon:
+::
+
+  sudo service docker start
+
+
+Platform components configuration
+---------------------------------
+
+Describe the configuration of each component in the installer
diff --git a/docs/release/configguide/index.rst b/docs/release/configguide/index.rst
new file mode 100644
index 00000000..d5e05d63
--- /dev/null
+++ b/docs/release/configguide/index.rst
@@ -0,0 +1,14 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) 2015 Dell Inc.
+.. (c) 2016 ZTE Corp.
+
+
+#################
+QTIP Config Guide
+#################
+
+.. toctree::
+   :maxdepth: 2
+
+   ./configuration.rst