summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/configguide/configuration.rst60
-rw-r--r--docs/userguide/introduction.rst72
2 files changed, 56 insertions, 76 deletions
diff --git a/docs/configguide/configuration.rst b/docs/configguide/configuration.rst
index e5228541..d6d2fd5d 100644
--- a/docs/configguide/configuration.rst
+++ b/docs/configguide/configuration.rst
@@ -7,39 +7,14 @@
Configuration
*************
-QTIP currently supports by using a Docker image or by pulling the repo from
-the upstream repository found at https://git.opnfv.org/qtip. Detailed steps
-about setting up QTIP using both of these options can be found below.
+QTIP currently supports by using a Docker image. Detailed steps
+about setting up QTIP can be found below.
To use QTIP you should have access to an OpenStack environment, with at least
Nova, Neutron, Glance, Keystone and Heat installed. Add a brief introduction
to configure OPNFV with this specific installer
-Pre-configuration activities
-----------------------------
-
-
-Setting QTIP framework on Ubuntu 14.04
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Install dependencies:
-::
-
- sudo apt-get install python-dev
- sudo apt-get install python-pip
- sudo apt-get install build-essential
- sudo apt-get install git wget
- sudo pip install python-heatclient python-glanceclient python-neutronclient
-
-
-Download source code and install python dependencies:
-::
-
- git clone https://git.opnfv.org/qtip
- cd qtip
-
-
Installing QTIP using Docker
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -47,18 +22,25 @@ QTIP has a Docker images on the docker hub. Pulling opnfv/qtip docker image
from docker hub:
::
- sudo docker pull opnfv/qtip
+ docker pull opnfv/qtip
Verify that opnfv/qtip has been downloaded. It should be listed as an image by
running the following command.
::
- sudo docker images
+ docker images
-Run the Docker instance:
+Make dir to store the QTIP image which will be used to create vm in cloud.
::
- docker run -it opnfv/qtip /bin/bash
+ mkdir $HOME/imgstore
+
+Run and enter the Docker instance:
+::
+ envs="INSTALLER_TYPE={INSTALLER_TYPE} -e INSTALLER_IP={INSTALLER_IP}
+-e NODE_NAME={NODE_NAME}"
+ docker run --name qtip -id -e $envs -v "$HOME/imgstore:/home/opnfv/imgstore" opnfv/qtip
+ docker exec -i -t qtip /bin/bash
Now you are in the container and QTIP can be found in the /repos/qtip and can
be navigated to using the following command.
@@ -79,22 +61,22 @@ from the OpenStack *openrc* file. This can be done by running the following
command.
::
- source get_env_info.sh -n {INSTALLER_TYPE} -i {INSTALLER_IP}
+ source scripts/get_env_info.sh -n {INSTALLER_TYPE} -i {INSTALLER_IP}
source opnfv-creds.sh
This provides a ``opnfv-creds.sh`` file which can be sources to get the
-environment variables. For running QTIP manually, it is also necessary to
-export the installer type.
-::
-
- export INSTALLER_TYPE="{installer-type}"
+environment variables.
QTIP default key pair
""""""""""""""""""""""
-QTIP uses a SSH key pair to connect to the guest image. This key pair can
-be found in the ``config/`` directory.
+QTIP uses a SSH key pair to connect to the guest image. You should generate key pair
+before running QTIP test. And put key pair in the ``config/`` directory.
+::
+
+ ssh-keygen -t rsa -N "" -f config/QtipKey -q
+
Hardware configuration
diff --git a/docs/userguide/introduction.rst b/docs/userguide/introduction.rst
index 7a202a45..4876d0e2 100644
--- a/docs/userguide/introduction.rst
+++ b/docs/userguide/introduction.rst
@@ -9,16 +9,16 @@ Introduction
************
This guide will serve as a first step to familiarize the user with how to
-run QTIP the first time when the user clones QTIP on to their host machine.
-In order to clone QTIP please follow the instructions in the
-installation.rst located in docs/userguide/installation.rst.
+run QTIP the first time when the user pull QTIP image on to their host machine.
+In order to install and config QTIP please follow the instructions in the
+configuration.rst located in docs/configguide/configuration.rst.
QTIP Directory structure:
-------------------------
The QTIP directory has been sectioned off into multiple folders to facilitate
segmenting information into relevant categories. The folders that concern
- the end user are `test_cases/` and `test_list/`.
+ the end user are `test_cases/` and `benchmarks/suite/`.
**test_cases/:**
@@ -58,7 +58,7 @@ distinguishes between a test to be run on the Virtual Machine or the compute
node itself, respectively.
-**test_list/:**
+**benchmarks/suite/:**
This folder contains three files, namely `compute`, `network` and `storage`.
These files list the benchmarks are to be run by the QTIP framework. Sample
@@ -132,11 +132,13 @@ The `Context` tag helps the user list the number of compute nodes they want
to run dhrystone on. The user can list all the compute nodes under the
`Host_Machines` tag. All the machines under test must be listed under the
`Host_Machines` and naming it incrementally higher. The `ip:` tag is used
- to specify the IP of the particular compute node. The `pw:` tag can be left
- blank because QTIP uses its own key for ssh. In order to run dhrystone on
- one compute node at a time the user needs to edit the `role:` tag. `role:
- host` for machine_1 and `role: server` for machine_2 will allow for
- dhrystone to be run on machine_1 and then run on machine_2.
+ to specify the IP of the particular compute node.The `ip:` tag can be left
+ blank when installer type is 'fuel',because QTIP will get ip
+ from installer. The `pw:` tag can be left blank because QTIP uses its own
+ key for ssh. In order to run dhrystone on one compute node at a time the user
+ needs to edit the `role:` tag. `role: host` for machine_1 and `role: server`
+ for machine_2 will allow for dhrystone to be run on machine_1 and then run
+ on machine_2.
::
@@ -312,71 +314,67 @@ Sample dhrystone_vm.yaml file:
Commands to run the Framework:
------------------------------
-In order to start QTIP on the default lab please use the following commands (asssuming you have prepared the config files in the test_cases/default/ directory and listed the intended suite in the test_list/<RELEVANT-SUITE-FILE>):
+In order to start QTIP on the default lab please use the following commands (asssuming your installer
+is 'fuel' or 'compass', you use the config files in the test_cases/default/ directory and listed the
+intended suite in the benchmarks/suite/<RELEVANT-SUITE-FILE>):
-First step is to export the necessary information to the environment.
-::
-
- source get_env_info.sh -n <INSTALLER_TYPE> -i <INSTALLER_IP>
-
-for running qtip on an openstack deployed using FUEL with the Installer IP 10.20.0.2
-::
-
- source get_env_info.sh -n fuel -i 10.20.0.2
+First step is to export the necessary information to the environment and generate QTIP key pair.
+Please follow the instructions in the configuration.rst.
-This will generate the `opnfv-creds.sh` file needed to use the python clients for keystone, glance, nova, and neutron.
+Secondary step download the QTIP image and upload it to the Cloud.QTIP will use this image
+to create VM when test VM performance.
::
- source opnfv-creds.sh
+ source docker/prepare_qtip_image.sh
-Running QTIP on the using `default` as the pod name and for the `compute` suite by cli
+Running QTIP on the using `default` as the pod name and for the `compute` suite by cli.
::
python qtip.py -l default -f compute
-Running QTIP on the using 'default' as the pod name and for the 'compute' suite 'bm' type by restful api
+Running QTIP on the using 'default' as the pod name and for the 'compute' suite 'bm' type by restful api.
::
- curl --trace-ascii debug.txt -X POST -d '{ "installer_ip": "10.20.6.2","installer_type":"fuel", "suite_name":"compute", "type": "BM"}' -H "Content-Type: application/json" http://qtip_server_ip:5000/api/v1.0/jobs
+ curl --trace-ascii debug.txt -X POST -d '{ "installer_ip": "10.20.6.2","installer_type":"fuel", "suite_name":"compute", "type": "BM"}' -H "Content-Type: application/json" http://127.0.0.1:5000/api/v1.0/jobs
-Running QTIP on the using 'default' as the pod name and for the 'compute' suite 'vm' type by restful api
+Running QTIP on the using 'default' as the pod name and for the 'compute' suite 'vm' type by restful api.
::
- curl --trace-ascii debug.txt -X POST -d '{ "installer_ip": "10.20.6.2","installer_type":"fuel", "suite_name":"compute", "type": "VM"}' -H "Content-Type: application/json" http://qtip_server_ip:5000/api/v1.0/jobs
+ curl --trace-ascii debug.txt -X POST -d '{ "installer_ip": "10.20.6.2","installer_type":"fuel", "suite_name":"compute", "type": "VM"}' -H "Content-Type: application/json" http://127.0.0.1:5000/api/v1.0/jobs
-Running QTIP on the using `default` as the pod name and for the `network` suite by cli
+Running QTIP on the using `default` as the pod name and for the `network` suite by cli.
::
python qtip.py -l default -f network
-Running QTIP on the using 'default' as the pod name and for the 'network' suite 'bm' type by restful api
+Running QTIP on the using 'default' as the pod name and for the 'network' suite 'bm' type by restful api.
::
- curl --trace-ascii debug.txt -X POST -d '{ "installer_ip": "10.20.6.2","installer_type":"fuel", "suite_name":"network", "type": "BM"}' -H "Content-Type: application/json" http://qtip_server_ip:5000/api/v1.0/jobs
+ curl --trace-ascii debug.txt -X POST -d '{ "installer_ip": "10.20.6.2","installer_type":"fuel", "suite_name":"network", "type": "BM"}' -H "Content-Type: application/json" http://127.0.0.1:5000/api/v1.0/jobs
-Running QTIP on the using `default` as the pod name and for the `storage` suite by cli
+Running QTIP on the using `default` as the pod name and for the `storage` suite by cli.
::
python qtip.py -l default -f network
-Running QTIP on the using 'default' as the pod name and for the 'storage' suite 'bm' type by restful api
+Running QTIP on the using 'default' as the pod name and for the 'storage' suite 'bm' type by restful api.
::
- curl --trace-ascii debug.txt -X POST -d '{ "installer_ip": "10.20.6.2","installer_type":"fuel", "suite_name":"storage", "type": "BM"}' -H "Content-Type: application/json" http://qtip_server_ip:5000/api/v1.0/jobs
+ curl --trace-ascii debug.txt -X POST -d '{ "installer_ip": "10.20.6.2","installer_type":"fuel", "suite_name":"storage", "type": "BM"}' -H "Content-Type: application/json" http://127.0.0.1:5000/api/v1.0/jobs
Get running QTIP job status by restful api
::
- curl --trace-ascii debug.txt -X GET http://qtip_server_ip:5000/api/v1.0/jobs/job-id
+ curl --trace-ascii debug.txt -X GET http://127.0.0.1:5000/api/v1.0/jobs/job-id
For example:
- curl --trace-ascii debug.txt -X GET http://172.37.0.3:5000/api/v1.0/jobs/5b71f035-3fd6-425c-9cc7-86acd3a04214
+ curl --trace-ascii debug.txt -X GET http://127.0.0.1:5000/api/v1.0/jobs/5b71f035-3fd6-425c-9cc7-86acd3a04214
Stop running QTIP job by restful api.The job will finish the current benchmark test and stop.
::
- curl --trace-ascii debug.txt -X DELTET http://qtip_server_ip:5000/api/v1.0/jobs/job-id
+ curl --trace-ascii debug.txt -X DELTET http://127.0.0.1:5000/api/v1.0/jobs/job-id
For example:
- curl --trace-ascii debug.txt -X DELETE http://172.37.0.3:5000/api/v1.0/jobs/5b71f035-3fd6-425c-9cc7-86acd3a04214q
+ curl --trace-ascii debug.txt -X DELETE http://127.0.0.1:5000/api/v1.0/jobs/5b71f035-3fd6-425c-9cc7-86acd3a04214q
Results:
--------