blob: f4d7530a4ceec7a08f64cf87066715e24f30ae90 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
|
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
.. (c) 2016 OPNFV.
Hardware
--------
A pharos compliant OPNFV test-bed provides:
- One CentOS/Ubuntu jump server on which the virtualized Openstack/OPNFV installer runs
- 3 controller nodes
- 2 compute nodes
- A configured network topology allowing for LOM, Admin, Public, Private, and Storage Networks
- Remote access as defined by the Jenkins slave configuration guide
http://artifacts.opnfv.org/octopus/brahmaputra/docs/octopus_docs/opnfv-jenkins-slave-connection.html#jenkins-slaves
In the Euphrates release you may select a variety of deployment toolchains to deploy from the
jump server.
**Servers**
**CPU:**
* Intel Xeon E5-2600v2 Series or newer
* AArch64 (64bit ARM architecture) compatible (ARMv8 or newer)
**Firmware:**
* BIOS/EFI compatible for x86-family blades
* EFI compatible for AArch64 blades
**Local Storage:**
Below describes the minimum for the Pharos spec, which is designed to provide enough capacity for
a reasonably functional environment. Additional and/or faster disks are nice to have and mayproduce
a better result.
* Disks: 2 x 1TB HDD + 1 x 100GB SSD (or greater capacity)
* The first HDD should be used for OS & additional software/tool installation
* The second HDD is configured for CEPH OSD
* The SSD should be used as the CEPH journal
* Performance testing requires a mix of compute nodes with CEPH (Swift+Cinder) and without CEPH storage
* Virtual ISO boot capabilities or a separate PXE boot server (DHCP/tftp or Cobbler)
**Memory:**
* 32G RAM Minimum
**Power Supply**
* Single power supply acceptable (redundant power not required/nice to have)
|
