diff options
| -rw-r--r-- | docs/jumpserver_install.rst | 79 | ||||
| -rw-r--r-- | docs/spec.rst | 42 |
2 files changed, 101 insertions, 20 deletions
diff --git a/docs/jumpserver_install.rst b/docs/jumpserver_install.rst new file mode 100644 index 00000000..8a7c20a4 --- /dev/null +++ b/docs/jumpserver_install.rst @@ -0,0 +1,79 @@ +**Jump Server Configuration:** + +(Rough Placeholder, edit me) + +**Fuel** + +1. Obtain CentOS 7 Minimal ISO and install + + ``wget http://mirrors.kernel.org/centos/7/isos/x86_64/CentOS-7-x86_64-Minimal-1503-01.iso`` + +2. Set parameters appropriate for your environment during installation + +3. Disable NetworkManager + + ``systemctl disable NetworkManager`` + +4. Configure your /etc/sysconfig/network-scripts/ifcfg-* files for your network + +5. Restart networking + + ``service network restart`` + +6. Edit /etc/resolv.conf and add a nameserver + + ``vi /etc/resolv.conf`` + +7. Install libvirt & kvm + + ``yum -y update`` + ``yum -y install kvm qemu-kvm libvirt`` + ``systemctl enable libvirtd`` + +8. Reboot: + + ``shutdown -r now`` + +9. If you wish to avoid annoying delay when use ssh to log in, disable DNS lookups: + + ``vi /etc/ssh/sshd_config`` + + Uncomment "UseDNS yes", change 'yes' to 'no'. + + Save + +10. Restart sshd + + ``systemctl restart sshd`` + +11. Install virt-install + + ``yum -y install virt-install`` + +12. Visit artifacts.opnfv.org and D/L the OPNFV Fuel ISO + +13. Create a bridge using the interface on the PXE network, for example: br0 + +14. Make a directory owned by qemu: + + ``mkdir /home/qemu; mkdir -p /home/qemu/VMs/fuel-6.0/disk`` + + ``chown -R qemu:qemu /home/qemu`` + +15. Copy the ISO to /home/qemu + + ``cd /home/qemu`` + + ``virt-install -n opnfv-2015-05-22_18-34-07-fuel -r 4096 --vcpus=4 --cpuset=0-3 -c opnfv-2015-05-22_18-34-07.iso --os-type=linux --os-variant=rhel6 --boot hd,cdrom --disk path=/home/qemu/VMs/mirantis-fuel-6.0/disk/fuel-vhd0.qcow2,bus=virtio,size=50,format=qcow2 -w bridge=br0,model=virtio --graphics vnc,listen=0.0.0.0`` + +16. Temporarily flush the firewall rules to make things easier: + + ``iptables -F`` + +17. Connect to the console of the installing VM with your favorite VNC client. + +18. Change the IP settings to match the pod, use an IP in the PXE/Admin network for the Fuel Master + +**Foreman** + +TBA diff --git a/docs/spec.rst b/docs/spec.rst index 67911158..316eee6c 100644 --- a/docs/spec.rst +++ b/docs/spec.rst @@ -4,7 +4,7 @@ Pharos Specification Objectives / Scope ------------------- -Pharos spec defines the OPNFV test environment (in which OPNFV platform can be deployed and tested … +Pharos spec defines the OPNFV test environment (in which OPNFV platform can be deployed and tested). - Provides a secure, scalable, standard and HA environment - Supports full deployment lifecycle (this requires a bare metal environment) @@ -12,21 +12,21 @@ Pharos spec defines the OPNFV test environment (in which OPNFV platform can be d - Provides common tooling and test scenarios (including test cases and workloads) available to the community - Provides mechanisms and procedures for secure remote access to the test environment -Virtualized environments will be useful but do not provide a fully featured deployment/test capability +Virtualized environments will be useful but do not provide a fully featured deployment/test capability. -The high level architecture may be summarized as follow: +The high level architecture may be summarized as follows: .. image:: images/pharos-archi1.jpg Constraints of a Pharos compliant OPNFV test-bed environment ------------------------------------------------------------- -- One jump (provisioning server) in which the installer runs in a VM -- 2 - 5 compute / controller nodes -- Jump server provisioned with CentOS7 -- Installer (e.g. Foreman) runs its own DHCP server therefore management network should not have DHCP server +- One CentOS 7 Jump Server on which the virtualized Openstack/OPNFV installer runs +- Desired installer - may be Fuel, Foreman, Juju, etc +- 2 - 5 compute / controller nodes (`BGS <https://wiki.opnfv.org/get_started/get_started_work_environment>`_ requires 5 nodes) +- Network topology allowing for LOM, Admin, Public, Private, and Storage Networks - Remote access -- A lights-out network is required for remote management and bare metal provisioning capability +- Test Tools Target Systems State --------------------- @@ -47,14 +47,16 @@ Hardware CPU: -* Intel Xeon E5-2600 (IvyBridge at least, or similar) +* Intel Xeon E5-2600v2 Series (Ivy Bridge and newer, or similar) -Local Storage: +Local Storage Configuration: -* Disks: 4 x 500G-2T + 1 x 300GB SSD (leave some room for experiments) -* First 2 disks should be combined to form a 1 TB virtual store for the OS/Software etc -* Remaining should be combined to form a virtual disk for CEPH storage -* The 5'th disk (SSD) for distributed storage (CEPH) journal towards SSD technology. +Below describes the minimum for the Pharos spec, which is designed to provide enough capacity for a reasonably functional environment. Additional and/or faster disks are nice to have and may produce a better result. + +* Disks: 2 x 1TB + 1 x 100GB SSD +* The first 1TB HDD should be used for OS & additional software/tool installation +* The second 1TB HDD configured for CEPH object storage +* Finally, the 100GB SSD should be used as the CEPH journal * Performance testing requires a mix of compute nodes that have CEPH(swift+Cinder) and without CEPH storage * Virtual ISO boot capabilities or a separate PXE boot server (DHCP/tftp or Cobbler) @@ -68,16 +70,18 @@ Power Supply Single **Provisioning** -Pre-provisioning Jump Server +Jump Server Installation -* OS - CentOS7 +* OS: CentOS 7 * KVM / Qemu * Installer (Foreman, Fuel, ...) in a VM -* Collaboration Tools +* Tools + +See `Jump Server Installation <https://wiki.opnfv.org/jump_server_installation_guide>`_ for detailed Jump Server installation details. Test Tools -Jumphost - `functest <http://artifacts.opnfv.org/functest/docs/functest.html>`_ +Jump Server - `functest <http://artifacts.opnfv.org/functest/docs/functest.html>`_ Controller nodes - bare metal @@ -230,5 +234,3 @@ Download the visio zip file here: `opnfv-example-lab-diagram.vsdx.zip <https://w .. image:: images/opnfv-example-lab-diagram.png FYI: `Here <http://www.opendaylight.org/community/community-labs>` is what the OpenDaylight lab wiki pages look like. - - |