restruct documents according to opnfvdocs

Use only development and release for we don't have test codes for now.

JIRA: PHAROS-311

Change-Id: Iacfcaba81a7a52e09cf999b8603cc9dc2f8f2b97
Signed-off-by: Julien <zhang.jun3g@zte.com.cn>

1 files changed, 52 insertions, 0 deletions

diff --git a/docs/release/release-notes/specification/hardwarespec.rst b/docs/release/release-notes/specification/hardwarespec.rst
new file mode 100644
index 00000000..8086aa91
--- /dev/null
+++ b/docs/release/release-notes/specification/hardwarespec.rst
@@ -0,0 +1,52 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) 2016 OPNFV.
+
+
+Hardware
+--------
+
+A pharos compliant OPNFV test-bed provides:
+
+- One CentOS 7 jump server on which the virtualized Openstack/OPNFV installer runs
+- In the Brahmaputra release you may select a variety of deployment toolchains to deploy from the
+  jump server.
+- 5 compute / controller nodes (`BGS
+  <https://wiki.opnfv.org/get_started/get_started_work_environment>`_ requires 5 nodes)
+- A configured network topology allowing for LOM, Admin, Public, Private, and Storage Networks
+- Remote access as defined by the Jenkins slave configuration guide
+
+http://artifacts.opnfv.org/brahmaputra.1.0/docs/opnfv-jenkins-slave-connection.brahmaputra.1.0.html
+
+**Servers**
+
+**CPU:**
+
+* Intel Xeon E5-2600v2 Series or newer
+* AArch64 (64bit ARM architecture) compatible (ARMv8 or newer)
+
+**Firmware:**
+
+* BIOS/EFI compatible for x86-family blades
+* EFI compatible for AArch64 blades
+
+**Local Storage:**
+
+Below describes the minimum for the Pharos spec, which is designed to provide enough capacity for
+a reasonably functional environment. Additional and/or faster disks are nice to have and mayproduce
+a better result.
+
+* Disks: 2 x 1TB HDD + 1 x 100GB SSD (or greater capacity)
+* The first HDD should be used for OS & additional software/tool installation
+* The second HDD is configured for CEPH object storage
+* The SSD should be used as the CEPH journal
+* Performance testing requires a mix of compute nodes with CEPH (Swift+Cinder) and without CEPH storage
+* Virtual ISO boot capabilities or a separate PXE boot server (DHCP/tftp or Cobbler)
+
+**Memory:**
+
+* 32G RAM Minimum
+
+**Power Supply**
+
+* Single power supply acceptable (redundant power not required/nice to have)