diff options
Diffstat (limited to 'tosca2heat/heat-translator-0.3.0/doc/source')
5 files changed, 191 insertions, 0 deletions
diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/conf.py b/tosca2heat/heat-translator-0.3.0/doc/source/conf.py new file mode 100755 index 0000000..23aa050 --- /dev/null +++ b/tosca2heat/heat-translator-0.3.0/doc/source/conf.py @@ -0,0 +1,75 @@ +# -*- coding: utf-8 -*- +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or +# implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +import os +import sys + +sys.path.insert(0, os.path.abspath('../..')) +# -- General configuration ---------------------------------------------------- + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom ones. +extensions = [ + 'sphinx.ext.autodoc', + #'sphinx.ext.intersphinx', + 'oslosphinx' +] + +# autodoc generation is a bit aggressive and a nuisance when doing heavy +# text edit cycles. +# execute "export SPHINX_DEBUG=1" in your terminal to disable + +# The suffix of source filenames. +source_suffix = '.rst' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'heat-translator' +copyright = u'2013, OpenStack Foundation' + +# If true, '()' will be appended to :func: etc. cross-reference text. +add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +add_module_names = True + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# -- Options for HTML output -------------------------------------------------- + +# The theme to use for HTML and HTML Help pages. Major themes that come with +# Sphinx are currently 'default' and 'sphinxdoc'. +# html_theme_path = ["."] +# html_theme = 'default' +# html_static_path = ['static'] + +# Output file base name for HTML help builder. +htmlhelp_basename = '%sdoc' % project + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, author, documentclass +# [howto/manual]). +latex_documents = [ + ('index', + '%s.tex' % project, + u'%s Documentation' % project, + u'OpenStack Foundation', 'manual'), +] + +# Example configuration for intersphinx: refer to the Python standard library. +#intersphinx_mapping = {'http://docs.python.org/': None} diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/contributing.rst b/tosca2heat/heat-translator-0.3.0/doc/source/contributing.rst new file mode 100644 index 0000000..8cb3146 --- /dev/null +++ b/tosca2heat/heat-translator-0.3.0/doc/source/contributing.rst @@ -0,0 +1 @@ +.. include:: ../../CONTRIBUTING.rst
\ No newline at end of file diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/index.rst b/tosca2heat/heat-translator-0.3.0/doc/source/index.rst new file mode 100644 index 0000000..dd3f04f --- /dev/null +++ b/tosca2heat/heat-translator-0.3.0/doc/source/index.rst @@ -0,0 +1,29 @@ +.. heat-translator documentation master file, created by + sphinx-quickstart on Tue Jul 9 22:26:36 2013. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to heat-translator's documentation! +=========================================== + +The heat-translator tool is aimed to translate non-heat templates to OpenStack +Heat Orchestration Template (HOT). Initially the tool is aimed to translate +OASIS Topology and Orchestration Specification for Cloud Applications (TOSCA) +to HOT. However, the tool can be easily extended to support any non-heat +template format to produce HOT. + +Contents: + +.. toctree:: + :maxdepth: 2 + + installation + usage + contributing + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/installation.rst b/tosca2heat/heat-translator-0.3.0/doc/source/installation.rst new file mode 100644 index 0000000..71c5237 --- /dev/null +++ b/tosca2heat/heat-translator-0.3.0/doc/source/installation.rst @@ -0,0 +1,15 @@ +============ +Installation +============ + +Assuming that OpenStackClient (OSC) is available in your environment, you can easily install Heat-Translator to use with OSC by following three steps:: + + git clone https://github.com/openstack/heat-translator + cd heat-translator + sudo python setup.py install + +You can also clone the project and use it without any specific OpenStack environment set up as below:: + + git clone https://github.com/openstack/heat-translator + +Heat-Translator can be installed via PyPI package as well. Refer to https://pypi.python.org/pypi/heat-translator for available packages. diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/usage.rst b/tosca2heat/heat-translator-0.3.0/doc/source/usage.rst new file mode 100644 index 0000000..c2c9b5a --- /dev/null +++ b/tosca2heat/heat-translator-0.3.0/doc/source/usage.rst @@ -0,0 +1,71 @@ +===== +Usage +===== + +Use Heat-Translator with OpenStackClient (OSC) +---------------------------------------------- +Assuming that OpenStackClient (OSC) is available in your environment, you can easily install Heat-Translator to use with OSC by following three steps:: + + git clone https://github.com/openstack/heat-translator + cd heat-translator + sudo python setup.py install + +Alternatively, you can install a particular release of Heat-Translator as available at https://pypi.python.org/pypi/heat-translator. + +Once installation is complete, Heat-Translator is ready to use. Currently you can use it in following three ways. + +Translate and get output on command line. For example: :: + + openstack translate template --template-file /home/openstack/heat-translator/translator/tests/data/tosca_helloworld.yaml --template-type tosca + +Translate and save output of translated file to a desired destination. For example: :: + + openstack translate template --template-file /home/openstack/heat-translator/translator/tests/data/tosca_helloworld.yaml --template-type tosca --output-file /tmp/hot_hello_world.yaml + +Do not translate but only validate template file. For example: :: + + openstack translate template --template-file /home/openstack/heat-translator/translator/tests/data/tosca_helloworld.yaml --template-type tosca --validate-only=true + +You can learn more about available options by running following help command:: + + openstack help translate template + + +Use Heat-Translator on its own +------------------------------ +Heat-Translator can be used without any specific OpenStack environment set up as below:: + + git clone https://github.com/openstack/heat-translator + python heat_translator.py --template-file==<path to the YAML template> --template-type=<type of template e.g. tosca> --parameters="purpose=test" + +The heat_translator.py test program is at the root level of the project. The program has currently tested with TOSCA templates. +It requires two arguments:: + +1. Path to the file that needs to be translated. The file, flat yaml template or CSAR, can be specified as a local file in your +system or via URL. +2. Type of translation (e.g. tosca) + +For example, a TOSCA hello world template can be translated by running the following command from the project location:: + + python heat_translator.py --template-file=translator/tests/data/tosca_helloworld.yaml --template-type=tosca + +This should produce a translated Heat Orchestration Template on the command line. The translated content can be saved to a desired file by setting --output-file=<path>. +For example: :: + + python heat_translator.py --template-file=translator/tests/data/tosca_helloworld.yaml --template-type=tosca --output-file=/tmp/hot_helloworld.yaml + +An optional argument can be provided to handle user inputs parameters. Also, a template file can only be validated instead of translation by using --validate-only=true +optional argument. The command below shows an example usage:: + + python heat_translator.py --template-file==<path to the YAML template> --template-type=<type of template e.g. tosca> --validate-only=true + +Alternatively, you can install a particular release of Heat-Translator as available at https://pypi.python.org/pypi/heat-translator. +In this case, you can simply run translation via CLI entry point:: + heat-translator --template-file=translator/tests/data/tosca_helloworld.yaml --template-type=tosca + +When deploy the translated template with Heat, please keep in mind that you have image registered in the Glance. The Heat-Translator +project sets flavor and image from a pre-defined set of values (as listed in /home/openstack/heat-translator/translator/hot/tosca/tosca_compute.py) +with the best possible match to the constraints defined in the TOSCA template. If there is no possible match found, a null value is set for now. +Per the future plan, an image and flavor will be provided from an online repository. + + |