diff options
Diffstat (limited to 'tosca2heat/heat-translator-0.3.0/doc/source')
5 files changed, 0 insertions, 191 deletions
diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/conf.py b/tosca2heat/heat-translator-0.3.0/doc/source/conf.py deleted file mode 100755 index 23aa050..0000000 --- a/tosca2heat/heat-translator-0.3.0/doc/source/conf.py +++ /dev/null @@ -1,75 +0,0 @@ -# -*- coding: utf-8 -*- -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or -# implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -import os -import sys - -sys.path.insert(0, os.path.abspath('../..')) -# -- General configuration ---------------------------------------------------- - -# Add any Sphinx extension module names here, as strings. They can be -# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom ones. -extensions = [ - 'sphinx.ext.autodoc', - #'sphinx.ext.intersphinx', - 'oslosphinx' -] - -# autodoc generation is a bit aggressive and a nuisance when doing heavy -# text edit cycles. -# execute "export SPHINX_DEBUG=1" in your terminal to disable - -# The suffix of source filenames. -source_suffix = '.rst' - -# The master toctree document. -master_doc = 'index' - -# General information about the project. -project = u'heat-translator' -copyright = u'2013, OpenStack Foundation' - -# If true, '()' will be appended to :func: etc. cross-reference text. -add_function_parentheses = True - -# If true, the current module name will be prepended to all description -# unit titles (such as .. function::). -add_module_names = True - -# The name of the Pygments (syntax highlighting) style to use. -pygments_style = 'sphinx' - -# -- Options for HTML output -------------------------------------------------- - -# The theme to use for HTML and HTML Help pages. Major themes that come with -# Sphinx are currently 'default' and 'sphinxdoc'. -# html_theme_path = ["."] -# html_theme = 'default' -# html_static_path = ['static'] - -# Output file base name for HTML help builder. -htmlhelp_basename = '%sdoc' % project - -# Grouping the document tree into LaTeX files. List of tuples -# (source start file, target name, title, author, documentclass -# [howto/manual]). -latex_documents = [ - ('index', - '%s.tex' % project, - u'%s Documentation' % project, - u'OpenStack Foundation', 'manual'), -] - -# Example configuration for intersphinx: refer to the Python standard library. -#intersphinx_mapping = {'http://docs.python.org/': None} diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/contributing.rst b/tosca2heat/heat-translator-0.3.0/doc/source/contributing.rst deleted file mode 100644 index 8cb3146..0000000 --- a/tosca2heat/heat-translator-0.3.0/doc/source/contributing.rst +++ /dev/null @@ -1 +0,0 @@ -.. include:: ../../CONTRIBUTING.rst
\ No newline at end of file diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/index.rst b/tosca2heat/heat-translator-0.3.0/doc/source/index.rst deleted file mode 100644 index dd3f04f..0000000 --- a/tosca2heat/heat-translator-0.3.0/doc/source/index.rst +++ /dev/null @@ -1,29 +0,0 @@ -.. heat-translator documentation master file, created by - sphinx-quickstart on Tue Jul 9 22:26:36 2013. - You can adapt this file completely to your liking, but it should at least - contain the root `toctree` directive. - -Welcome to heat-translator's documentation! -=========================================== - -The heat-translator tool is aimed to translate non-heat templates to OpenStack -Heat Orchestration Template (HOT). Initially the tool is aimed to translate -OASIS Topology and Orchestration Specification for Cloud Applications (TOSCA) -to HOT. However, the tool can be easily extended to support any non-heat -template format to produce HOT. - -Contents: - -.. toctree:: - :maxdepth: 2 - - installation - usage - contributing - -Indices and tables -================== - -* :ref:`genindex` -* :ref:`modindex` -* :ref:`search` diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/installation.rst b/tosca2heat/heat-translator-0.3.0/doc/source/installation.rst deleted file mode 100644 index 71c5237..0000000 --- a/tosca2heat/heat-translator-0.3.0/doc/source/installation.rst +++ /dev/null @@ -1,15 +0,0 @@ -============ -Installation -============ - -Assuming that OpenStackClient (OSC) is available in your environment, you can easily install Heat-Translator to use with OSC by following three steps:: - - git clone https://github.com/openstack/heat-translator - cd heat-translator - sudo python setup.py install - -You can also clone the project and use it without any specific OpenStack environment set up as below:: - - git clone https://github.com/openstack/heat-translator - -Heat-Translator can be installed via PyPI package as well. Refer to https://pypi.python.org/pypi/heat-translator for available packages. diff --git a/tosca2heat/heat-translator-0.3.0/doc/source/usage.rst b/tosca2heat/heat-translator-0.3.0/doc/source/usage.rst deleted file mode 100644 index c2c9b5a..0000000 --- a/tosca2heat/heat-translator-0.3.0/doc/source/usage.rst +++ /dev/null @@ -1,71 +0,0 @@ -===== -Usage -===== - -Use Heat-Translator with OpenStackClient (OSC) ----------------------------------------------- -Assuming that OpenStackClient (OSC) is available in your environment, you can easily install Heat-Translator to use with OSC by following three steps:: - - git clone https://github.com/openstack/heat-translator - cd heat-translator - sudo python setup.py install - -Alternatively, you can install a particular release of Heat-Translator as available at https://pypi.python.org/pypi/heat-translator. - -Once installation is complete, Heat-Translator is ready to use. Currently you can use it in following three ways. - -Translate and get output on command line. For example: :: - - openstack translate template --template-file /home/openstack/heat-translator/translator/tests/data/tosca_helloworld.yaml --template-type tosca - -Translate and save output of translated file to a desired destination. For example: :: - - openstack translate template --template-file /home/openstack/heat-translator/translator/tests/data/tosca_helloworld.yaml --template-type tosca --output-file /tmp/hot_hello_world.yaml - -Do not translate but only validate template file. For example: :: - - openstack translate template --template-file /home/openstack/heat-translator/translator/tests/data/tosca_helloworld.yaml --template-type tosca --validate-only=true - -You can learn more about available options by running following help command:: - - openstack help translate template - - -Use Heat-Translator on its own ------------------------------- -Heat-Translator can be used without any specific OpenStack environment set up as below:: - - git clone https://github.com/openstack/heat-translator - python heat_translator.py --template-file==<path to the YAML template> --template-type=<type of template e.g. tosca> --parameters="purpose=test" - -The heat_translator.py test program is at the root level of the project. The program has currently tested with TOSCA templates. -It requires two arguments:: - -1. Path to the file that needs to be translated. The file, flat yaml template or CSAR, can be specified as a local file in your -system or via URL. -2. Type of translation (e.g. tosca) - -For example, a TOSCA hello world template can be translated by running the following command from the project location:: - - python heat_translator.py --template-file=translator/tests/data/tosca_helloworld.yaml --template-type=tosca - -This should produce a translated Heat Orchestration Template on the command line. The translated content can be saved to a desired file by setting --output-file=<path>. -For example: :: - - python heat_translator.py --template-file=translator/tests/data/tosca_helloworld.yaml --template-type=tosca --output-file=/tmp/hot_helloworld.yaml - -An optional argument can be provided to handle user inputs parameters. Also, a template file can only be validated instead of translation by using --validate-only=true -optional argument. The command below shows an example usage:: - - python heat_translator.py --template-file==<path to the YAML template> --template-type=<type of template e.g. tosca> --validate-only=true - -Alternatively, you can install a particular release of Heat-Translator as available at https://pypi.python.org/pypi/heat-translator. -In this case, you can simply run translation via CLI entry point:: - heat-translator --template-file=translator/tests/data/tosca_helloworld.yaml --template-type=tosca - -When deploy the translated template with Heat, please keep in mind that you have image registered in the Glance. The Heat-Translator -project sets flavor and image from a pre-defined set of values (as listed in /home/openstack/heat-translator/translator/hot/tosca/tosca_compute.py) -with the best possible match to the constraints defined in the TOSCA template. If there is no possible match found, a null value is set for now. -Per the future plan, an image and flavor will be provided from an online repository. - - |