1 files changed, 76 insertions, 0 deletions
diff --git a/docs/release/installation/installation.instruction.rst b/docs/release/installation/installation.instruction.rst
new file mode 100644
index 0000000..3a1417a
--- /dev/null
+++ b/docs/release/installation/installation.instruction.rst
@@ -0,0 +1,76 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+
+Parser general configuration
+=====================
+Parser can be configured with any installer in current OPNFV.
+
+Pre-configuration activities
+-----------------------------
+For parser, there is not specific pre-configuration activities.
+
+Hardware configuration
+-----------------------
+For parser, there is not hardware configuration needed for this specific installer.
+
+Jumphost configuration
+-----------------------
+For parser, there is not intial Jumphost configuration (network and software)needed in order
+to deploy any installer.
+
+
+Parser tosca2heat configuration
+=====================
+For tosca2heat components(tosca-parser and heat-translator) in parser,there are not specific
+configuration of each component in installer.
+
+
+Parser yang2tosca configuration
+=====================
+Parser yang2tosca requires the following to be installed.
+
+1. PYANG
+--------
+
+Please follow the below installation steps.
+
+Step 1: Clone pyang tool or download the zip file from the following link.
+
+.. code-block:: bash
+
+    git clone https://github.com/mbj4668/pyang.git
+
+OR
+
+.. code-block:: bash
+
+    wget https://github.com/mbj4668/pyang/archive/master.zip
+
+Step 2: Change directory to the downloaded directory and run the setup file.
+
+.. code-block:: bash
+
+    cd pyang
+    python setup.py
+
+2. python-lxml
+--------------
+
+Please follow the below installation link. http://lxml.de/installation.html
+
+
+Parser policy2tosca configuration
+============================
+Parser - POLICY2TOSCA requires the following to be installed.
+
+1. cliff
+--------
+
+Install cliff with the following links.
+::
+- `install <http://docs.openstack.org/developer/cliff/install.html>`
+or
+- `demoapp <http://docs.openstack.org/developer/cliff/demoapp.html>
+
+