diff options
Diffstat (limited to 'build')
| -rwxr-xr-x | build/BuildAndTestOVS.sh | 39 | ||||
| -rwxr-xr-x | build/build_dpdk_rpm.sh | 133 | ||||
| -rwxr-xr-x | build/build_ovs_rpm.sh | 190 | ||||
| -rw-r--r-- | build/config | 6 | ||||
| -rwxr-xr-x | build/instack_ovs.sh | 65 | ||||
| -rwxr-xr-x | build/test_ovs_rpm.sh | 86 |
6 files changed, 413 insertions, 106 deletions
diff --git a/build/BuildAndTestOVS.sh b/build/BuildAndTestOVS.sh index ff2495c..10a2f05 100755 --- a/build/BuildAndTestOVS.sh +++ b/build/BuildAndTestOVS.sh @@ -1,16 +1,24 @@ #!/bin/bash -############################################################################## -# Copyright (c) 2016 Red Hat Inc. and others. -# therbert@redhat.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## + +# Copyright (c) 2016 Open Platform for NFV Project, Inc. and its contributors +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + set -e echo "===============================" echo executing $0 $@ +echo usage() { echo "$0 -a <kernel major> -d -g <OVS TAG> -h\ @@ -81,6 +89,10 @@ else echo Will use default kernel in ovs test vm fi +if [ ! -z $DPDK ]; then + setbuilddpdk="-d" +fi + if [ -z ${WORKSPACE+1} ]; then # We are not being run by Jenkins. export WORKSPACE=$HOME/opnfv/ovsnfv @@ -127,19 +139,12 @@ if [ ! -z $TESTRPM ]; then if [ ! -z $kernel_version ]; then instack_ovs.sh -a $kernel_major -g $TAG -i $kernel_minor -p $OVS_PATCH -t -u $OVS_REPO_URL else - instack_ovs.sh -g $TAG -p $OVS_PATCH -t -u $OVS_REPO_URL + instack_ovs.sh $setbuilddpdk -g $TAG -p $OVS_PATCH -t -u $OVS_REPO_URL fi else # Run build locally. - build_ovs_rpm.sh -d -g -p $OVS_PATCH -u $OVS_REPO_URL + build_ovs_rpm.sh $setbuilddpdk -g $TAG -p $OVS_PATCH -u $OVS_REPO_URL cp $HOME/rpmbuild/RPMS/* $TMP_RELEASE_DIR fi -echo "--------------------------------------------------" -echo "Build OVS RPM from upstream git $OVS_REPO_URL version $TAG" -if [ ! -z $OVS_PATCH ]; then - echo "Apply patches from: $OVS_PATCH" -fi -echo - exit 0 diff --git a/build/build_dpdk_rpm.sh b/build/build_dpdk_rpm.sh new file mode 100755 index 0000000..a36403d --- /dev/null +++ b/build/build_dpdk_rpm.sh @@ -0,0 +1,133 @@ +#!/bin/bash + +# Copyright (c) 2016 Open Platform for NFV Project, Inc. and its contributors +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +set -e + +echo "===============================" +echo executing $0 $@ +echo executing on machine `uname -a` + +usage() { + echo run BuildAndTestOVS -h for complete help on options on ovsnfv scripts. +} + +while getopts "g:hp:u:v" opt; do + case "$opt" in + g) + DPDK_VERSION=${OPTARG} + ;; + h|\?) + usage + exit 1 + ;; + p) + DPDK_PATCH=${OPTARG} + ;; + u) + DPDK_REPO_URL=${OPTARG} + ;; + v) + verbose="yes" + ;; + esac +done + +if [ -z $DPDK_REPO_URL ]; then + DPDK_REPO_URL=http://dpdk.org/git/dpdk +fi +if [ -z $DPDK_VERSION ]; then + DPDK_VERSION=2.2.0 +fi + +HOME=`pwd` +TOPDIR=$HOME +TMPDIR=$TOPDIR/rpms + +if [ -d $TMPDIR ] +then + rm -rf $TMPDIR +fi + +echo "---------------------" +echo "Install dependencies for dpdk" +echo +sudo yum -y install gcc make python-devel openssl-devel autoconf automake rpm-build \ + redhat-rpm-config libtool libpcap-devel numactl-devel python-sphinx \ + libvirt-devel + + +mkdir -p $TMPDIR + +cd $TMPDIR + +mkdir -p $HOME/rpmbuild/RPMS +mkdir -p $HOME/rpmbuild/SOURCES +mkdir -p $HOME/rpmbuild/SPECS +mkdir -p $HOME/rpmbuild/SRPMS + +RPMDIR=$HOME/rpmbuild + +# +# Use Fedora copr spec file +# +echo "---------------------" +echo "Get copr distribution git" +mkdir -p copr +cd copr +git clone http://copr-dist-git.fedorainfracloud.org/cgit/pmatilai/dpdk/dpdk.git + +echo "---------------------" +echo "Build DPDK RPM version $DPDK_VERSION" +echo +cd $TMPDIR +git clone $DPDK_REPO_URL +cd dpdk +if [[ "$DPDK_VERSION" =~ "master" ]]; then + git checkout master + snapgit=`git log --pretty=oneline -n1|cut -c1-8` +else + git checkout v$DPDK_VERSION + snapgit=`grep "define snapver" $TMPDIR/copr/dpdk/dpdk.spec | cut -c25-33` +fi + +cp $TMPDIR/copr/dpdk/dpdk.spec $TMPDIR/dpdk +cp $TMPDIR/copr/dpdk/dpdk.spec $RPMDIR/SPECS +cp $TMPDIR/copr/dpdk/*.patch $TMPDIR/copr/dpdk/sources $TMPDIR/copr/dpdk/dpdk-snapshot.sh $RPMDIR/SOURCES +snapser=`git log --pretty=oneline | wc -l` + +makever=`make showversion` +basever=`echo ${makever} | cut -d- -f1` + +prefix=dpdk-$basever +archive=${prefix}.tar.gz +DPDK_VERSION=$basever + +echo "-------------------------------" +echo "Creating ${archive}" +echo +git archive --prefix=${prefix}/ HEAD | gzip -9 > ${archive} +cp ${archive} $RPMDIR/SOURCES/ +echo "-------------------------------" +echo building RPM for DPDK version $DPDK_VERSION +echo +rpmbuild -bb --define "_topdir $RPMDIR" dpdk.spec + +echo "-------------------------------" +echo Copy dpdk RPM +echo +cp $RPMDIR/RPMS/x86_64/*.rpm $HOME + +exit 0 diff --git a/build/build_ovs_rpm.sh b/build/build_ovs_rpm.sh index 60b92e6..53e8745 100755 --- a/build/build_ovs_rpm.sh +++ b/build/build_ovs_rpm.sh @@ -1,14 +1,19 @@ #!/bin/bash -############################################################################## -# Copyright (c) 2016 Red Hat Inc. and others. -# therbert@redhat.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## + +# Copyright (c) 2016 Open Platform for NFV Project, Inc. and its contributors +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + set -e -declare -i CNT echo "===============================" echo executing $0 $@ @@ -18,6 +23,22 @@ usage() { echo run BuildAndTestOVS -h for help } +function delrpm() { + set +e + rpm -q $1 + if [ $? -eq 0 ]; then + sudo rpm -e --allmatches $1 + fi + set -e +} +function cleanrpms() { + delrpm openvswitch + delrpm dpdk-devel + delrpm dpdk-tools + delrpm dpdk-examples + delrpm dpdk +} + while getopts "cdg:hkp:u:v" opt; do case "$opt" in c) @@ -52,78 +73,135 @@ HOME=`pwd` TOPDIR=$HOME TMPDIR=$TOPDIR/ovsrpm +echo "---------------------------------------" +echo Clean out old working dir +echo if [ -d $TMPDIR ] then rm -rf $TMPDIR fi +echo "----------------------------------------" +echo Install pre-reqs. +echo sudo yum -y install gcc make python-devel openssl-devel kernel-devel graphviz \ kernel-debug-devel autoconf automake rpm-build redhat-rpm-config \ - libtool + libtool python-twisted-core desktop-file-utils groff PyQt4 VERSION=2.3.90 os_type=fedora kernel_version=$(uname -a | awk '{print $3}') -mkdir -p $TMPDIR +RPMDIR=$HOME/rpmbuild -cd $TMPDIR +echo "---------------------------------------" +echo Clean out old reminents of old rpms and rpm _topdir. +echo +rm openvswitch*.rpm || true +if [ -d $RPMDIR ]; then + rm -rf $RPMDIR +fi + +echo "---------------------------------------" +echo Create new rpm _topdir. +echo mkdir -p $HOME/rpmbuild/RPMS mkdir -p $HOME/rpmbuild/SOURCES mkdir -p $HOME/rpmbuild/SPECS mkdir -p $HOME/rpmbuild/SRPMS -RPMDIR=$HOME/rpmbuild +mkdir -p $TMPDIR -echo "---------------------" -echo "Clone git repo $OVS_REPO_URL and checkout branch or tag $TAG" -echo -git clone $OVS_REPO_URL +cd $TMPDIR -cd ovs -echo "--------------------" -echo "Checkout OVS $TAG" -echo -if [[ ! "$TAG" =~ "master" ]]; then - git checkout $TAG -fi -if [[ ! "$OVS_PATCH" =~ "no" ]]; then - echo "Apply patches from $OVS_PATCH" -fi -./boot.sh if [ ! -z $DPDK ]; then - ./configure --with-dpdk + echo "----------------------------------" + echo "Build OVS for dpdk. Use Fedora copr repo" + echo + echo "----------------------------------" + echo "Clone Fedora copr repo and copy files." + echo + git clone http://copr-dist-git.fedorainfracloud.org/cgit/pmatilai/dpdk/openvswitch.git + cp $TMPDIR/openvswitch/openvswitch.spec $RPMDIR/SPECS + cp $TMPDIR/openvswitch/* $RPMDIR/SOURCES + snapgit=`grep "define snapver" $TMPDIR/openvswitch/openvswitch.spec | cut -c26-33` + echo "-------------------------------------------" + echo "Remove old dpdk, ovs and dpdk development rpms" + echo + cleanrpms + echo "-------------------------------------------" + echo "Install dpdk and dpdk development rpms" + echo + sudo rpm -ivh $HOME/dpdk-2*.rpm + sudo rpm -ivh $HOME/dpdk-devel*.rpm + echo "----------------------------------------" + echo "Copy DPDK RPM to SOURCES" + echo + cp $HOME/*.rpm $RPMDIR/SOURCES + echo "--------------------------------------------" + echo "Get commit from $snapgit User Space OVS version $TAG" + echo + cd $TMPDIR + git clone $OVS_REPO_URL + cd $TMPDIR/ovs + git checkout $snapgit + echo "--------------------------------------------" + echo "Creating archive, $archive using copr script" + echo + snapser=`git log --pretty=oneline | wc -l` + basever=`grep AC_INIT configure.ac | cut -d' ' -f2 | cut -d, -f1` + prefix=openvswitch-${basever}-${snapser}.git${snapgit} + archive=$prefix.tar.gz + git archive --prefix=${prefix}/ HEAD | gzip -9 > $RPMDIR/SOURCES/${archive} + cd $TMPDIR/openvswitch + echo "--------------------------------------------" + echo "Build openvswitch RPM" + echo else - ./configure --with-linux=/lib/modules/`uname -r`/build + echo "-------------------------------------------------" + echo "Build OVS without DPDK:" + echo "Use spec files for $os_type in OVS distribution." + echo + if [[ "$TAG" =~ "master" ]]; then + git clone $OVS_REPO_URL + cd ovs + + if [[ ! "$OVS_PATCH" =~ "no" ]]; then + echo "Apply patches from $OVS_PATCH" + fi + basever=`grep AC_INIT configure.ac | cut -d' ' -f2 | cut -d, -f1` + export VERSION=$basever + + echo "--------------------------------------------" + echo making distribution tarball for Open vswitch version $VERSION + echo + ./boot.sh + ./configure + make dist + + echo cp openvswitch-*.tar.gz $HOME/rpmbuild/SOURCES + cp openvswitch-*.tar.gz $HOME/rpmbuild/SOURCES + else + export VERSION=${TAG} + echo "---------------------------------------------" + echo "Get openvswith-${VERSION}.tar.gz" + echo + curl --silent --output $HOME/rpmbuild/SOURCES/openvswitch-${VERSION}.tar.gz http://openvswitch.org/releases/openvswitch-${VERSION}.tar.gz + fi + + if [ ! -z $kmod ]; then + echo "--------------------------------------------" + echo "Building openvswitch kernel module RPM" + echo + rpmbuild -bb -D "kversion $kernel_version" -D "kflavors default" --define "_topdir `echo $RPMDIR`" $setnocheck rhel/openvswitch-kmod-${os_type}.spec + fi + echo "--------------------------------------------" + echo "Build openvswitch RPM" + echo fi -echo "--------------------" -echo "Make OVS $TAG" -echo -make - -if [[ "$TAG" =~ "master" ]]; then - v=$($TMPDIR/ovs/utilities/ovs-vsctl --version | head -1 | cut -d' ' -f4) - export VERSION=$v -else - export VERSION=${TAG:1} -fi - -echo making RPM for Open vswitch version $VERSION -make dist - -echo cp openvswitch-*.tar.gz $HOME/rpmbuild/SOURCES -cp openvswitch-*.tar.gz $HOME/rpmbuild/SOURCES - -if [ ! -z $kmod ]; then - echo "Building kernel module..." - rpmbuild -bb -D "kversion $kernel_version" -D "kflavors default" --define "_topdir `echo $RPMDIR`" $setnocheck rhel/openvswitch-kmod-${os_type}.spec -echo " Kernel RPM built!" -fi - -echo "Building User Space..." -rpmbuild -bb --define "_topdir `echo $RPMDIR`" $setnocheck rhel/openvswitch.spec +rpmbuild -bb --define "_topdir `echo $RPMDIR`" $setnocheck openvswitch.spec cp $RPMDIR/RPMS/x86_64/*.rpm $HOME diff --git a/build/config b/build/config index 78480ed..b30db9a 100644 --- a/build/config +++ b/build/config @@ -21,7 +21,7 @@ # built from the top of current master. The tag uses the current ovs naming and # release convention. This option can be overriden in the command line. # -export OVSTAG=master +export OVSTAG=2.4.0 # # when NOCHECK is yes, the ovs rpm is build with the --without check option which # Disables running "make check" as the RPM is built. @@ -34,8 +34,10 @@ export PATCH=none # # DPDK configuration. # +export WITH_DPDK=yes export DPDK_PATCH=none +export DPDK_VERSION=2.2.0 # # When KMOD is set, the Linux kernel module is built and tested. # -export KMOD=yes +export KMOD=no diff --git a/build/instack_ovs.sh b/build/instack_ovs.sh index 83b141c..4c258a4 100755 --- a/build/instack_ovs.sh +++ b/build/instack_ovs.sh @@ -26,6 +26,7 @@ while getopts "a:dg:hi:p:tu:v" opt; do ;; d) DPDK="yes" + setdpdk="-d" ;; g) TAG=${OPTARG} @@ -58,8 +59,10 @@ echo =============================================== echo Default Configuration Options. echo =============================================== echo option NOCHECK is set to $NOCHECK +echo build DPDK option is set to $DPDK echo DPDK Patch URL is set to $DPDK_PATCH -echo Build and Test OVS Kernel Module is set to $KMOD +echo DPDK Version is set to $DPDK_VERSION +echo Option for OVS Kernel Module is set to $KMOD echo =============================================== if [[ $NOCHECK =~ "yes" ]]; then setnocheck="-c" @@ -236,8 +239,11 @@ done ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" <<EOI set -e - echo yum -y update + echo "----------------------------------------------------------------" + echo yum update and install pciutils prereqs for DPDK tools and samples. + echo yum -y update + yum -y install pciutils libvirt EOI # reboot VM @@ -330,37 +336,66 @@ echo Copy build and test scripts to undercloud vm. echo BUILD_BASE is $BUILD_BASE scp ${SSH_OPTIONS[@]} $BUILD_BASE/build_ovs_rpm.sh stack@$UNDERCLOUD: scp ${SSH_OPTIONS[@]} $BUILD_BASE/test_ovs_rpm.sh stack@$UNDERCLOUD: - # -# build rpm on undercloud. +# build dpdk rpm locally. +# +if [[ "$DPDK" =~ "yes" ]]; then + echo Build DPDK RPMs + ./build_dpdk_rpm.sh -g $DPDK_VERSION +fi +# +# Build rpm on undercloud if custom kernel module is required otherwise build +# locally. # if [ ! -z $kernel_version ]; then echo build rpm on undercloud with kernel version $kernel_version ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI ./build_ovs_rpm.sh -a $kernel_major $setnocheck -g $TAG -i $kernel_minor -k -p $OVS_PATCH -u $OVS_REPO_URL EOI + scp ${SSH_OPTIONS[@]} stack@UNDERCLOUD:*.rpm $RPMDIR/RPMS/ +elif [[ "$DPDK" =~ "yes" ]]; then + echo Build ovs with DPDK locally + # + # Build locally and copy RPMS to undercloud vm for testing + # and copy RPMS to temporary release dir. + # + ./build_ovs_rpm.sh $setnocheck -d -g $TAG -p $OVS_PATCH -u $OVS_REPO_URL else - # build locally and copy RPMS to undercloud vm for testing + # Build locally and copy RPMS to undercloud vm for testing # and copy RPMS to temporary release dir. # - echo build rpm on undercloud - ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI - ./build_ovs_rpm.sh $setnocheck -g $TAG $setkmod -p $OVS_PATCH -u $OVS_REPO_URL -EOI + echo build OVS rpm locally + ./build_ovs_rpm.sh $setnocheck -g $TAG $setkmod -p $OVS_PATCH -u $OVS_REPO_URL fi # # Test rpm on undercloud vm +# TODO: Undercloud VM doesn't support sse3 instruction needed set to run DPDK # -if [[ ! -z $TESTRPM ]]; then - echo Test rpm on undercloud vm - ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI - ./test_ovs_rpm.sh $setkmod +if [ ! -z $TESTRPM ]; then + if [ -z $DPDK ]; then + echo "-----------------------------------------" + echo Test rpm on undercloud vm + echo Copy all RPMS to undercloud for testing. + echo + scp ${SSH_OPTIONS[@]} $RPMDIR/RPMS/x86_64/* stack@$UNDERCLOUD: + scp ${SSH_OPTIONS[@]} $RPMDIR/SOURCES/dpdk*.rpm stack@$UNDERCLOUD: + ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI + ./test_ovs_rpm.sh $setdpdk $setkmod EOI + else + echo "-----------------------------------------" + echo "TODO: Undercloud VM doesn't support sse3 instruction needed DPDK." + echo "DPDK is required, therefore test DPDK/OVS RPM in host" + echo + ./test_ovs_rpm.sh $setdpdk $setkmod + fi fi + # -# copy rpms from undercloud back to host +# If tests pass, copy rpms to release dir # +echo copy rpms to release dir echo copy rpms from undercloud back to $TMP_RELEASE_DIR in host -scp ${SSH_OPTIONS[@]} stack@$UNDERCLOUD:rpmbuild/RPMS/x86_64/*.rpm $TMP_RELEASE_DIR +cp $RPMDIR/RPMS/x86_64/* $TMP_RELEASE_DIR exit 0 diff --git a/build/test_ovs_rpm.sh b/build/test_ovs_rpm.sh index fce5ca4..264cd6e 100755 --- a/build/test_ovs_rpm.sh +++ b/build/test_ovs_rpm.sh @@ -1,14 +1,20 @@ #!/bin/bash -############################################################################## -# Copyright (c) 2016 Red Hat Inc. and others. -# therbert@redhat.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## + +# Copyright (c) 2016 Open Platform for NFV Project, Inc. and its contributors +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + set -e -declare -i CNT echo "===============================" echo executing $0 $@ @@ -19,6 +25,22 @@ usage() { echo run BuildAndTest -h for help } +function delrpm() { + set +e + rpm -q $1 + if [ $? -eq 0 ]; then + sudo rpm -e --allmatches $1 + fi + set -e +} +function cleanrpms() { + delrpm openvswitch + delrpm dpdk-devel + delrpm dpdk-tools + delrpm dpdk-examples + delrpm dpdk +} + while getopts "dg:hkp:u:v" opt; do case "$opt" in d) @@ -56,26 +78,58 @@ mkdir -p $TMPDIR cd $TMPDIR -mkdir -p $HOME/rpmbuild/RPMS +mkdir -p $HOME/rpmbuild/RPMS/x86_64 mkdir -p $HOME/rpmbuild/SOURCES mkdir -p $HOME/rpmbuild/SPECS mkdir -p $HOME/rpmbuild/SRPMS RPMDIR=$HOME/rpmbuild +cp $HOME/*.rpm $RPMDIR/RPMS/x86_64 + +function stopovs() { + set +e + /bin/systemctl is-active openvswitch.service + if [ $? -eq 0 ]; then + sudo /bin/systemctl stop openvswitch.service + fi + set -e +} + +echo "-----------------------------------" +echo "Clean old dpdk and ovs installations" +echo +stopovs +cleanrpms + +if [ ! -z $DPDK ]; then + echo "-----------------------------------" + echo "Install DPDK RPMs" + echo + sudo rpm -ivh $RPMDIR/RPMS/x86_64/dpdk-2*.rpm + sudo rpm -ivh $RPMDIR/RPMS/x86_64/dpdk-tools-2*.rpm + sudo rpm -ivh $RPMDIR/RPMS/x86_64/dpdk-examples-2*.rpm +fi -echo " Testing installation of kmod RPM" if [ ! -z $kmod ]; then - echo "Install kernel module" + echo "-----------------------------------" + echo "Test installation of kmod RPM" + echo sudo rpm -ivh $RPMDIR/RPMS/x86_64/openvswitch-kmod*.rpm - echo " Kernel RPM installed." fi -echo "Testing User Space RPM" +echo "-----------------------------------" +echo "Test installation of user space RPM" +echo sudo rpm -ivh $RPMDIR/RPMS/x86_64/openvswitch-2*.rpm +echo "-----------------------------------" +echo "Start openvswitch service." +echo sudo service openvswitch start sudo ovs-vsctl show -sudo ovs-vsctl add-br br1 -sudo ovs-ofctl dump-flows br1 +sudo ovs-vsctl add-br brtest +sudo ovs-ofctl dump-flows brtest +sudo ovs-vsctl del-br brtest +sudo service openvswitch stop exit 0 |