summaryrefslogtreecommitdiffstats
path: root/docs
AgeCommit message (Collapse)AuthorFilesLines
2018-02-12Update git submodulesEmma Foley1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Create host networking configuration" - Create host networking configuration Create host networking configuration based on the input configuration file. To define the networks using libvirt, a temporary XML file is generated for each network. JIRA: YARDSTICK-962 Change-Id: I24d1c4d2f2e62884675599deb7db255862283ea4 Signed-off-by: John O Loughlin <john.oloughlin@intel.com>
2018-02-12Update git submodulesEmma Foley1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "vpe: convert DPKD_PORT to LINK ID" - vpe: convert DPKD_PORT to LINK ID http://dpdk.org/doc/guides/sample_app_ug/ip_pipeline.html#application-resources-present-in-the-configuration-file LINK instances are created implicitly based on the PORT_MASK application startup argument. LINK0 is the first port enabled in the PORT_MASK, port 1 is the next one, etc. The LINK ID is different than the DPDK PMD-level NIC port ID, which is the actual position in the bitmask mentioned above. For example, if bit 5 is the first bit set in the bitmask, then LINK0 is having the PMD ID of 5. This mechanism creates a contiguous LINK ID space and isolates the configuration file against changes in the board PCIe slots where NICs are plugged in. Change-Id: I6e449272cfcfb2b2a75c246f7f569e3f923da245 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-02-12Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "vswitchperf: Use POD12 for VERIFY and MERGE jobs" - vswitchperf: Use POD12 for VERIFY and MERGE jobs In the past, vswitchperf's VERIFY & MERGE jobs were executed at ericsson-build3 & build4 machines. However VPP sometimes refuses to start properly and it is hard to debug root cause without access to these servers. Thus description of VERIFY & MERGE jobs was changed to run them by default at POD12, which is dedicated to vswitchperf project. In case that daily job is active, then VERIFY & MERGE jobs will be executed at ericsson-build4 as before. Execution of "make sanity" was removed, because this target is a "stub" in vsperf makefile. Change-Id: Iec0f788ab28425d0999811ceb5236e097cee2ff4 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
2018-02-12Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "Add K8s Yardstick daily job for arm64" - Add K8s Yardstick daily job for arm64 Add k8s Yardstick daily job for arm64 based on compass4nfv for arm64, which would be triggered after the k8s deployment on arm64. Change-Id: Ic928ce4bf0c32060a74a434b6bb3e9d9848f3e32 Signed-off-by: trevortao <trevor.tao@arm.com>
2018-02-12Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge changes I68779792,Ide8d210e * changes: Export CI_LOOP as expected by Functest Export an new var related to Energy in functest jobs - Export CI_LOOP as expected by Functest Otherwise all testcases are skipped: https://build.opnfv.org/ci/view/functest/job/functest-apex-baremetal-daily-master/764/console https://build.opnfv.org/ci/view/functest/job/functest-apex-baremetal-daily-master/763/console It will be enforced by a similar patch in Functest too. Change-Id: I6877979295378ed9ce6b85ad62e8a78e1572b8ba Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com> - Export an new var related to Energy in functest jobs It conforms with "Unlink Energy from functest utils and constants": https://gerrit.opnfv.org/gerrit/#/c/51943/ Depends-On: Iecd5d49b4d4c961c9dc51e43e54df1fcd4027266 Change-Id: Ide8d210eab26451a63911938fe0e1bafcf77c500 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-12Update git submodulesGuo Ruijing1-0/+0
* Update docs/submodules/container4nfv from branch 'master' - update kata container deployment 1. fix kata container deployment failure issue 2. use package instead of source build 3. remove docker installation 4. upgrade to k8s 1.9 Change-Id: Ie7698fb0e6a3a459d42b17d998b21f2dcf3a7854 Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2018-02-12Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "cleanup: rm node_ID from yardstick prepare_env file" - cleanup: rm node_ID from yardstick prepare_env file There is some redundant code in prepare_env.sh script for the fuel installer, the changes are to: 1. Remove variabls 'node_ID' and 'node_line_num'; 2. Rewrite section that replace ip address of controller/compute; 3 Add $YARDSTICK_REPO_DIR in front of variable 'pod_yaml'; JIRA: YARDSTICK-991 Change-Id: I4fbd2c2ba2e6109cc04dc452202fbed701d79b2b Signed-off-by: ting wu <ting.wu@enea.com>
2018-02-11Update git submodulesEmma Foley1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Remove references to "dpdk_nic_bind" utility" - Remove references to "dpdk_nic_bind" utility In DPDK 16.07 [1], "dpdk_nic_bind" utility was renamed to "dpdk-devbind". This patch removes all references to this previous naming to avoid confusions. [1] https://dpdk-guide.gitlab.io/dpdk-guide/setup/binding.html JIRA: YARDSTICK-995 Change-Id: I827c4c11c9e9e519f33f21b80459e7d65e51545e Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-02-11Update git submodulesEmma Foley1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "BugFIX: NSB-setup build script fix for BM" - BugFIX: NSB-setup build script fix for BM JIRA: YARDSTICK-994 The NSB set-up script for baremetal is broken. In nsb_setp.yml file, "Prepare baremetal machine" is commented due to which the ubuntu_server_baremetal_deploy_samplevnfs.yml file is never called. Change-Id: Icc95018ba746d6efa5baf09322b3255806da8952 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-02-11Update git submodulesRodolfo Alonso Hernandez1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Replace "python-heatclient" with "shade" client" - Replace "python-heatclient" with "shade" client Replaced "python-heatclient" with "shade" client. The "python-heatclient" library is removed from requirements file. "shade" client version 1.22.2 is the required one for OpenStack Pike release. shade is the recommended client to interact with OpenStack clouds [1] [1] https://github.com/openstack-infra/shade JIRA: YARDSTICK-880 Change-Id: Ibbdfc42a543d2d9ed4cf70d78de3de8cbecd0076 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-02-11Update git submodulesagardner1-0/+0
* Update docs/submodules/dovetail from branch 'master' - Auto Generated INFO.yaml file INFO.yaml meant to be machine readable. This file was auto generated from an ldap lookup and your projects INFO file. Meeting times are not currently filled out. please ammend this patchset to complete Going forward comitter promotions should be done against this file. PTLs: Must be merged for you to gain delete access on testresults.opnfv.org If project_lead: is missing (my script could not parse) please amend with same from commiters section eg: project_lead: &opnfv_dovetail_ptl name: 'Lead Name' email: 'lead email' id: 'lead lfid' company: 'lead company' Change-Id: Ie151ba96dd6b6c7d0d8e74e1462e35133a7c235f Signed-off-by: agardner <agardner@linuxfoundation.org>
2018-02-11Update git submoduleszhihui wu1-0/+0
* Update docs/submodules/qtip from branch 'master' - Merge "Add the creation/deletion of image in the pipeline" - Add the creation/deletion of image in the pipeline - Specify image download and upload details JIRA: QTIP-291 Change-Id: I9f4e0d179f7d907b448b716274348fb6c71dd3bc Signed-off-by: zhihui wu <wu.zhihui1@zte.com.cn>
2018-02-11Update git submodulesxudan1-0/+0
* Update docs/submodules/releng from branch 'master' - Bugfix: delete extra whitespace Change-Id: I1fe8c9d4b6b2ee461320bc20342d439e23c9c616 Signed-off-by: xudan <xudan16@huawei.com>
2018-02-11Update git submodulesmei mei1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "[Dovetail CI] change dovetail CI jobs on Compass" - [Dovetail CI] change dovetail CI jobs on Compass 1. run default test suite on Compass on Monday and Tuesday for scenario 'os-nosdn-nofeature-ha' and 'os-odl_l3-nofeature-ha' 2. run test suite 'proposed_tests' on Compass on Thursday and Friday for scenario 'os-nosdn-nofeature-ha' and 'os-odl_l3-nofeature-ha' JIRA: DOVETAIL-612 Change-Id: I027ca278eb63bdc6842a9494b676cdab8d2d25bf Signed-off-by: xudan <xudan16@huawei.com>
2018-02-11Update git submodulesRuijing Guo1-0/+0
* Update docs/submodules/container4nfv from branch 'master' - Merge "Fix onap aai deployment failure issue" - Fix onap aai deployment failure issue Change-Id: I3a2bf891d3910e395ea976c31454bd6556fc4a3a Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2018-02-11Update git submodulesRuijing Guo1-0/+0
* Update docs/submodules/container4nfv from branch 'master' - Merge "Clearwater documentation" - Clearwater documentation Documentation for clearwater implementation. Change-Id: I6cc06f82aeb8b75f64b239f629866f22c8cca60e Signed-off-by: Laura Sofia Enriquez <lsofia.enriquez@gmail.com>
2018-02-11Update git submodulesHU Xinhui1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Merge "change k8s version to v1.9.1" - change k8s version to v1.9.1 JIRA: - 1. compass4nfv can deploy v1.9.1 kubernetes 2. end user can use the kubernetes dashboard Change-Id: I274dda38599da95f382dfcb4159b530da8422fd8 Signed-off-by: hu xinhui <xinhui_hu@foxmail.com>
2018-02-11Update git submodulesGuo Ruijing1-0/+0
* Update docs/submodules/container4nfv from branch 'master' - update to vagrant 2.0.2 vagrant 1.8 cannot download vagrant box Change-Id: I07252a7e5dc11f084419a44dffc1262e981f2b74 Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2018-02-10Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move docker build to 1.2.3 Change-Id: Ic71b41027bf580c5110c0fe2fb3128eec77681cc Signed-off-by: ahothan <ahothan@cisco.com>
2018-02-10Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-65] 1.2.2: AttributeError: 'RunningTrafficProfile' object has no attribute 'software_mode' Fix exception Change-Id: Id95c31d8ba999e0da39fa07c4e31e696da89d98e Signed-off-by: ahothan <ahothan@cisco.com>
2018-02-10Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Run all daily testcases if CI_LOOP is unset Then CI_LOOP is no longer mandatory and it bypasses the current jenkins jobs's issue [1][2][3]. [1] https://gerrit.opnfv.org/gerrit/#/c/51981/ [2] https://build.opnfv.org/ci/view/functest/job/functest-apex-baremetal-daily-master/763/console [3] https://build.opnfv.org/ci/view/functest/job/functest-apex-baremetal-daily-master/764/console Change-Id: I73629079d70e0f43e609d3861490573e10fd216c Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-10Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Read the env file only if exists Change-Id: I8e718e583a5a47a089755c31e623a44732e5ba1e Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-10Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Ensure logging is disabled when unit testing feature Change-Id: Ibe08477a8b50a6c9b71ab4e5b0ebaaab36692b08 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-10Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Unlink robotframework from constants Change-Id: Ic2c6c84c3824ec3fa208824ae67f1769d4e18c4f Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Adding L2GW Scenario" - Adding L2GW Scenario This scenario allows you to install L2GW Neutron driver and point to OpenDaylight as service provider. apex-tripleo-heat-templates: I37039207bc7cf9965d26e6dfa034e84bf9b7224d Change-Id: I0dfd37bcc5060f0ad8caa95e1f87a7411bd6e723 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-02-09Update git submodulesRodolfo Alonso Hernandez1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Prox vnf descriptor cleanup" - Prox vnf descriptor cleanup JIRA: YARDSTICK-1003 - There are redundant files for Prox vnf descriptors tg and vnf for 1, 2 and 4 port set-up. - We can use one vnf descriptor file per prox tg and prox vnf, reducing the number of redundant files. - Tested on Prox BM L2fwd 2 and 4 port test case. Change-Id: I4c61fd11725121f19392443460ac2ad39c934e2d Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-02-09Update git submodulesEddie Arrage1-0/+0
* Update docs/submodules/dovetail from branch 'master' - Add ablity to config EXTERNAL_NETWORK in env_config.sh - EXTERNAL_NETWORK env variable can be explicitly set - If set, the value will be used in Yardstack configuration - Otherwise, previous method of using output from 'openstack network list' will still be employed Change-Id: I9d8b4a69ff3f5093c034823cc95e92e151bfade6 Signed-off-by: Eddie Arrage <eddie.arrage@huawei.com>
2018-02-09Update git submodulesEmma Foley1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Make 'Scenario' classes plugable" - Make 'Scenario' classes plugable This patch makes yardstick.benchmark.scenario.base:Scenario classes plugable. A new entry point is added to the setup. This entry point could be extended in other plugin projects to add new Scenario classes. E.g.: take a look at [1]. This is a Yardstick plugin example project. Clone the project and execute, from the project directory: $ sudo -EH python setup.py install This will add a new module to python ('yardstick-new-plugin') and a new Scenario class. Now list the scenarios in Yardstick: $ yardstick scenario list ... | SpecCPU2006_for_VM | Spec CPU2006 benchmark for Virtual Machine | | SpecCPU2006 | Spec CPU2006 benchmark | | Dummy2 | Execute Dummy (v2!) echo | +-----------------------+--------------------------------------------+ [1] https://github.com/ralonsoh/yardstick_new_plugin JIRA: YARDSTICK-910 Change-Id: Ib70ee9bf4dc7ff91d1dd6377317b313288e36bff Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-02-09Update git submodulesEmma Foley1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Change nsb_setup.sh to use NSB image instead of raw" - Change nsb_setup.sh to use NSB image instead of raw The `ansible/roles/create_samplevnfs_image/tasks/main.yml` ansible role uses raw NSB image (yardstick-xenial-server.raw) to upload it to OpenStack instead QCOW2 NSB converted image (yardstick-nsb-image.img which is converted from the raw). Changed the create_samplevnfs_image role to to use NSB image. JIRA: YARDSTICK-1000 Change-Id: Ieda9f14e6882ca854331b4eccc9a4cb390b6a475 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Remove one obsolete var" - Remove one obsolete var Else it simply forces the config file into xtesting. Change-Id: I33153997f2aa422e50cea011f6a4e7eb567a83d7 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Unlink feature from constants" - Unlink feature from constants Saving results dir as class attribute seems better in the context of xtesting. Change-Id: If40303d07d3be9bdc09d990f560cbeda429fd642 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Unlink vnf from constants" - Unlink vnf from constants It generates a default description which all testcases can easily override. Change-Id: I81b97c394cf064088767cc934295602f01a7f739 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Unlink run_tests from constants" - Unlink run_tests from constants run_tests.py doesn't read any functest config file what is mandatory for xtesting. Change-Id: I49f672c54a606acead75f573d1ce496c81fb235a Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesEmma Foley1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Delete any previous configuration" - Delete any previous configuration Delete any previous configuration using the virsh module in ansible: Networks, VMs and local IPs. JIRA: YARDSTICK-950 Change-Id: Ie4963ab8210ce50ba2e9fa22642ec27a3b2031e1 Signed-off-by: John O Loughlin <john.oloughlin@intel.com>
2018-02-09Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[jump] Add simple check for required Linux bridges" - [jump] Add simple check for required Linux bridges - MaaS requires PXE/admin to be a Linux bridge; - if virtual nodes are present, they should be hooked to a proper Linux bridge for the Public network, but only throw a warning if not (and create a mock public virsh network instead); - if both virtual and baremetal nodes are present, Public bridge is indirectly mandatory (we can't mock it); JIRA: FUEL-339 Change-Id: Idfe99d66c49eadc56cb3d94ca4db3467fb76d388 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Unlink Energy from functest utils and constants" - Unlink Energy from functest utils and constants It requires an update of releng jobs which have to export ENERGY_RECORDER_API_URL = http://energy.opnfv.fr/resources Change-Id: Iecd5d49b4d4c961c9dc51e43e54df1fcd4027266 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Move get_dict_by_test() into run_tests.py" - Move get_dict_by_test() into run_tests.py It also removes functest_utils.get_criteria_by_test() Change-Id: I3f265642acd053755e32f8e92f1086b93517c247 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Conform with OpenStackUser.get_os_creds() in juju_epc" - Conform with OpenStackUser.get_os_creds() in juju_epc UserSettings are not linked to any project then abot has to be passed as arg when calling get_os_creds. Else it returns the project registered in credentials instead of the one created by this testcase. Change-Id: Ia0658cc9af155df06de3d14e21e5288dad6367f9 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Get neutron endpoint via snaps in odl" - Get neutron endpoint via snaps in odl Change-Id: Iaf0e451e7f6bd7d22459f8d3509b39773527cfea Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-09Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - salt.sh: Fix one more broken online check Fixes: 5f95f52 Change-Id: I53e08a89b2e873829a78ff75c0f3532329ef87a3 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-09Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Move source_credentials() into run_tests.py" - Move source_credentials() into run_tests.py It's also renamed source_envfile(). Change-Id: I0e7c38c2def125961f86dc2bc9a63cfb6ad87c03 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-08Update git submodulesAric Gardner1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "Ansible for build server" - Ansible for build server Tests are working, switch to running on lf-build1 and lf-build2 when triggered. Change-Id: I1d3be9a84452cc3d6cd7097474bcc4dca0f70c6d Signed-off-by: agardner <agardner@linuxfoundation.org>
2018-02-08Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/snaps from branch 'master' - Update the DNS default value in docstrings It completes the previous patch [1] about that topic. [1] https://gerrit.opnfv.org/gerrit/#/c/51845/ Change-Id: Ib2ba07c0d5608bd452ed209544d4dbfc17124299 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-08Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Refactor tempest resource manager" - Refactor tempest resource manager Split resource creation into several methods. Implements partly JIRA: FUNCTEST-913 Change-Id: Ic0dd5782c604498066c636deef10b0c18c1cb48d Signed-off-by: Juha Kosonen <juha.kosonen@nokia.com>
2018-02-08Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "[Compass4NFV] Add blocking jobs" - [Compass4NFV] Add blocking jobs Compas4nfv support k8s and openstack. The blocking jobs need include the k8s. Change-Id: I517064df660266463050f7d3820bf5c405c8c222 Signed-off-by: wutianwei <wutianwei1@huawei.com>
2018-02-08Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "vswitchperf: python version change" - vswitchperf: python version change In order to execute VSPERF CI job, the SCL with python3 must be enabled. Recently SCL command was changed to enable python3.4. Change-Id: I4cf34ff28db2c789f4bc13116ed2d5d95eb81990 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com>
2018-02-08Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "[arm-build] prune-docker-images on all builders" - [arm-build] prune-docker-images on all builders Prune dangling references on all arm-build* hosts. Remove arm-build2 as it will be retired. Change-Id: Ib425b3ef8021fa74d5942609093234cad35c0644 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-08Update git submodulesagardner1-0/+0
* Update docs/submodules/releng from branch 'master' - Add -y to for non-interactive ansible install Change-Id: I2ab00b3b6aadf9efc5bac72fcdcd9941f12f8bc9 Signed-off-by: agardner <agardner@linuxfoundation.org>
2018-02-08Update git submodulesAric Gardner1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "missing sudo for ansible install" - missing sudo for ansible install Change-Id: I6d7ab7746c75a8d33a27de3bf534b02cbc87e8ae Signed-off-by: agardner <agardner@linuxfoundation.org>
2018-02-08Update git submodulesAric Gardner1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "Job for ansible to setup build servers." - Job for ansible to setup build servers. set noop for now. -C, --check don't make any changes; instead, try to predict some of the changes that may occur -D, --diff when changing (small) files and templates, show the differences in those files; works great with --check Change-Id: I723fcf1b068b8ef73a0994be90271cb1cdd51ecb Signed-off-by: agardner <agardner@linuxfoundation.org>