Age | Commit message (Collapse) | Author | Files | Lines |
|
* Update docs/submodules/releng from branch 'master'
- doctor: Fix AArch64 phase jobs not found
Change-Id: Iefb3a889302ecbf3b69529405543908880fad87f
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
Signed-off-by: Delia Popescu <delia.popescu@enea.com>
|
|
* Update docs/submodules/joid from branch 'master'
- add pod19 without vlan.
Change-Id: I0764f19e0389921a7240802ebce0c484837f19ee
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- Add br-vlan-veth to the br-vlan bridge in openSUSE
br-vlan-eth was created but not added to any bridge, therefore floating ips
were not working as it was impossible for the OVS in the compute to get the
ARP messages coming from the gateway of the public network
Change-Id: Ia0828b7e96359dc10012ac52bf0e5d4f2c5419cb
Signed-off-by: Manuel Buil <mbuil@suse.com>
|
|
* Update docs/submodules/pharos from branch 'master'
- Merge "generate_config: Use eyaml to decrypt secret values"
- generate_config: Use eyaml to decrypt secret values
Note: IDF data encryption is not supported. Supporting that is
trivial, but it leads to slightly more complicated code, plus it
breaks support for multiline scalar encrypted data in the PDF ('>'),
forcing us to define each encrypted value as inline string.
While at it, fix silly limitation of jinja2 path residing in a subdir
of CWD.
Change-Id: I441ec754d8b6e4aad2ed73aba0b9b18ed65f05f4
Signed-off-by: agardner <agardner@linuxfoundation.org>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* Update docs/submodules/samplevnf from branch 'master'
- correct prox ipsec vnf
reapply the latest changes (47355 and 47521) due to gerrit merge problem
* fix crypto init for both encryptor and decryptor
* improve performance: preallocate crypto op memory in init
* finalize enabling routed ipsec traffic (proper IP/MAC addresses)
* correct handling of dropped packets at encryptor
* Fix receive packets with size > 1024 bytes
Change-Id: I51cccc9bef0b9564ea1a3465ad28fb985eee06d1
Signed-off-by: Igor Shaula <igor.shaula@intel.com>
|
|
* Update docs/submodules/fuel from branch 'master'
- Merge "ci/deploy.sh: Add new `-E` arg for env erase"
- ci/deploy.sh: Add new `-E` arg for env erase
NOTE: In order to undefine VCP VMs with NVRAM (e.g. AArch64 VMs
using AAVMF), an additional parameter should be passed to libvirt
by Salt virt core module (equivalent to `virsh undefine --nvram`).
While at it, pass CI_DEBUG, ERASE_ENV enviroment variables to
state execution, and stop force-applying patches.
Also refactor the rsync between foundation node and Salt master,
so the whole git repo is copied as </root/opnfv>, and <root/fuel>
becomes a link to it; useful for Armband, where 'fuel' is a git
submodule. Fix .git paths after rsync, so git submodules work as
expected in cfg01 repos.
JIRA: FUEL-307
Change-Id: Ic62f03e786581c019168c50ccc50107238021d7f
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* Update docs/submodules/fuel from branch 'master'
- [virtual] Apply nova controller state twice
In order to complete broken database sync run
nova state on controller one more time.
Change-Id: I761f26667ebb531b848a62e096f3d79f588d9f24
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* Update docs/submodules/moon from branch 'master'
- push the modifications from moonv4/templates/moonforming to moonv4/tests
Change-Id: Id9abe1c299f2cfbf95c5026d74ccb74c1429834e
|
|
* Update docs/submodules/moon from branch 'master'
- Add more control on Keystone exceptions
Change-Id: I1db596b0b7df7344d8cdc40768c7ee6373905c34
|
|
* Update docs/submodules/moon from branch 'master'
- Update to the v4.3.1 container
Change-Id: I2fd986beb684d270e2c0c5fb718413c3e5822ad0
|
|
* Update docs/submodules/moon from branch 'master'
- Update to the v4.3.1 container
Change-Id: I42c49a5211e6fb9b6b35891580780cfea2a0b034
|
|
* Update docs/submodules/moon from branch 'master'
- Add an argument to control the verbose or debug mode and update to the container v1.2
Change-Id: I4f85dbd6cde4e8eb9b39f0fd13cddb0d33da8a76
|
|
* Update docs/submodules/moon from branch 'master'
- Add waiting code for Keystone, re-add the ability to connect a PDP to the "admin" Keystone project and fix some bugs
Change-Id: Ic3afdb1306a72bd09f9071e96aabfae602153e94
|
|
* Update docs/submodules/functest from branch 'master'
- Merge "Removal of deprecated SNAPS-OO classes."
- Removal of deprecated SNAPS-OO classes.
JIRA: SNAPS-202
Change-Id: I115b4927b287a5525f4c1b95128d91f5229c7856
Signed-off-by: spisarski <s.pisarski@cablelabs.com>
|
|
* Update docs/submodules/releng from branch 'master'
- Merge "Enlarge the timeout for storage test"
- Enlarge the timeout for storage test
It seems we need to give more time for storage test.
That job has been aborted by timeout those days.[1]
[1]
https://build.opnfv.org/ci/view/qtip/job/qtip-storage-apex-master/97/console
Change-Id: Iafef11d38a83c95e8bf82c4b6664716f4e8de535
Signed-off-by: zhihui wu <wu.zhihui1@zte.com.cn>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- xci: config: pinned-versions: Bump Bifrost SHA
Change-Id: I9df869fa82f4486b104f4330b83e8300362afb54
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- Remove the share flag
When creating the external network for functest testing purposes, it does not
need to be shareable between tenants because functest uses routers and floating
ips. Therefore, better remove it to avoid confusion
Change-Id: I18a1fd34a52ddae2527ee3580a9d1a2b649e61b6
Signed-off-by: Manuel Buil <mbuil@suse.com>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- xci: Use the dib pip-and-virtualenv element
The element will ensure that we have a reasonable set of pip
and virtualenv packages in place as well as pick the right
python version for the distribution. We also make sure that
we use python2 everywhere.
Change-Id: I8a83af9acffbd8d6d583832956e1685100ec508a
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/pharos from branch 'master'
- Fix yamllint warning for daisy template
Change-Id: I4b9a9a569d22570f027a49bc31736f6787177171
Signed-off-by: Alex Yang <yangyang1@zte.com.cn>
|
|
* Update docs/submodules/vswitchperf from branch 'master'
- Merge "trex_stat_packet_counts: Add packet counts to trex reporting"
- trex_stat_packet_counts: Add packet counts to trex reporting
Adds packet count totals for transmit and receive to reporting
at the end of test execution.
JIRA: VSPERF-546
Change-Id: I51027fae109d0ea794c0db03f5781ddb2fcbb941
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
* Update docs/submodules/releng from branch 'master'
- Merge "added for master branch and new scenarios."
- added for master branch and new scenarios.
Change-Id: I78ef43217896d2f7daa4df1a665c7be6bc14c088
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>
|
|
* Update docs/submodules/bottlenecks from branch 'master'
- Cadvisor Client-Server installation automation script
JIRA: BOTTLENECK-181
Automated the installation for cadvisor client from
jump server host and added docker installation of cadvisor
in monitoring script.
Change-Id: I906b5237bc0ed320106309c1a29e8dd72a05a427
Signed-off-by: Rutuja Surve <rutuja.r.surve@gmail.com>
|
|
* Update docs/submodules/bottlenecks from branch 'master'
- Collectd Client-Server installation automation script
JIRA: BOTTLENECK-181
Automated the installation for collectd client from
jump server host and corrected docker versions in monitoring
script
Change-Id: I14ec20f2761c72e261aa1185a381f0c02b84ed45
Signed-off-by: Rutuja Surve <rutuja.r.surve@gmail.com>
|
|
* Update docs/submodules/container4nfv from branch 'master'
- add examples for container4nfv
1. add example for kubeadm with weave
2. add example for kubeadm with multus
3. add example for kubeadm with ovsdpdk
4. add example for kubeadm with virtlet
Change-Id: I138e71e45f0aba8389dca0e1a826f4662572af29
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
|
|
* Update docs/submodules/ves from branch 'master'
- More dashboard improvements
JIRA: VES-2
Change-Id: I1373255d253f8fadae5a0c74aeb789369c92460f
Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>
|
|
* Update docs/submodules/ves from branch 'master'
- Add more collectd data to influx/grafana
JIRA: VES-2
Disable uuid for "node" mode
Change-Id: I055db4f52eee7a61438a4e7e63740b42dc3f1777
Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>
|
|
* Update docs/submodules/releng from branch 'master'
- Merge "Add the pod info to the job name"
- Add the pod info to the job name
Since fetch_os_creds.sh has a judgement with BUILD_TAG,
I add the pod info for it.
Change-Id: I248be530d15bb807dcf9fec1fe924d698a8f56ab
Signed-off-by: zhihui wu <wu.zhihui1@zte.com.cn>
|
|
* Update docs/submodules/releng from branch 'master'
- Clean Functest images for CI jobs on ARM
Change-Id: I3e9d8122bf67296d6270583efeda34ac64e21e68
Signed-off-by: Linda Wang <wangwulin@huawei.com>
|
|
* Update docs/submodules/armband from branch 'master'
- u/fuel: Fix patch apply failure after latest bump
Change-Id: I7e05e05551bb1dee8f531e12fd60b85dcc67e695
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* Update docs/submodules/samplevnf from branch 'master'
- fix prox crypto build
Change-Id: I4ea54763871c18b1bd6cec9dbb926f18f0f5833f
Signed-off-by: Igor Shaula <igor.shaula@intel.com>
|
|
* Update docs/submodules/samplevnf from branch 'master'
- Merge "Add support for nop mode with l3 submode"
- Add support for nop mode with l3 submode
The l3 submode was not supported in nop mode, as the nop mode uses some
specific nop thread (and not generic). When L3 is specified, the nop mode
must use the generic thread. In addition the l3 submode is implemented
differently than other submodes. It is not supported through task_init
structures (i.e. each task does not have to explicitely tell that it
supports l3 submode). But this prevented to run both a nop with no submode
and a nop with a l3 submode. Note that nop with l3 is usually not very useful
- it handles arp (requests and response) but as nop, it does not swap IP
addresses. So with a real switch, the packets transmitted will be received
back... and l3 mode is usually mainly usefull when using a switch.
However, there is at least one nop mode where l3 submode makes sense:
when the nop does not transmit. In such cases, for instace used in
conjunction with a gen l3, the nop receives all packets and forward
the arp requests and responses to the master for handling.
Change-Id: I992121db285ba25a11cbb494092a6afc6fe55a58
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
* Update docs/submodules/samplevnf from branch 'master'
- * fix encryption: ESP packet format
* fix traffic routing
* enqueue packets in a bulk (improve crypto performance: TBD)
* improve code clarity
* fix crypto dequeuing
* complete decryption path implementation
* NOTE: the code works in a chain mode; crypto init to be fixed next
Change-Id: I058a906f4f4f5691ebf25d2cdf5b5faded88e11d
Signed-off-by: Igor Shaula <igor.shaula@intel.com>
|
|
* Update docs/submodules/snaps from branch 'master'
- Refactoring of SecurityGroupSettings to extend SecurityGroupConfig
SecurityGroupSettings, SecurityGroupSettings and neutron_utils have a
runtime cyclical dependency. This patch reduces this dependency and
deprecates the SecurityGroupSettings and SecurityGroupRuleSettings class with
snaps.config.security_group SecurityGroupConfig and SecurityGroupRuleConfg classes
JIRA: SNAPS-224
Change-Id: I6cd82ed5be31f4a24449be767b203e86489b1962
Signed-off-by: spisarski <s.pisarski@cablelabs.com>
|
|
* Update docs/submodules/ves from branch 'master'
- Fix missing folder name
JIRA: VES-2
Change-Id: Ie5522a9f6b84cdd7ef53fa264d65aef60b4b41dd
Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>
|
|
* Update docs/submodules/ves from branch 'master'
- Switch from guest to node mode.
JIRA: VES-2
Change-Id: I3e61f7f226fe05c79a0f91cc97b8a8ad685ff4ea
Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Merge "Fix "Broken pipe" IOErrors of rally run"
- Fix "Broken pipe" IOErrors of rally run
Replace obsolete os.popen with subprocess module usage in command
output retrieval. Do not use shell as the program to execute.
Change-Id: Ic63bb0f393750c3b85a35a37fecd46c1c1b96602
Signed-off-by: Juha Kosonen <juha.kosonen@nokia.com>
|
|
* Update docs/submodules/armband from branch 'master'
- u/fuel: Bump & rebase for latest version
This is to include public gw on prx nodes
Change-Id: I6dbab7ae8e3ddb1df46f908acf53eeefb5680af2
Signed-off-by: ting wu <ting.wu@enea.com>
|
|
* Update docs/submodules/snaps from branch 'master'
- Refactoring of VmInstanceSettings to extend VmInstanceConfig
VmInstanceSettings, FloatingIPSettings and nova_utils have a
runtime cyclical dependency. This patch reduces this dependency and
deprecates the VmInstanceSettings and FloatingIPSettings class with
snaps.config.vm_inst VmInstanceConfig and FloatingIpConfg classes
JIRA: SNAPS-218
Change-Id: I95688130256bca1df4a5c347bdb741019ae0937e
Signed-off-by: spisarski <s.pisarski@cablelabs.com>
|
|
* Update docs/submodules/vswitchperf from branch 'master'
- Merge "sriov: Determine path to the bind-tool"
- sriov: Determine path to the bind-tool
In case of SRIOV path to the bind-tool must be known before
NIC driver is re-initialized. It means before TestCase.__init__()
is called.
Change-Id: Ib6fdba233e665144510dd492462c0a21aa19ed71
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
* Update docs/submodules/vswitchperf from branch 'master'
- Merge "regression: OVS/DPDK regression tests"
- regression: OVS/DPDK regression tests
A set of regression tests for verification of OVS/DPDK
features was introduced. Following features are tested:
* DPDK NIC Support
* DPDK Hotplug Support
* RX Checksum Support
* Flow Control Support
* Multiqueue Support
* Vhost User
* Virtual Devices Support
* NUMA Support
* Jumbo Frame Support
* Rate Limiting
* Quality of Service
JIRA: VSPERF-539
Change-Id: I6c83e9c38e29f197a5236ac68c88d7045fef775b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Signed-off-by: Richard Elias <richardx.elias@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
* Update docs/submodules/vswitchperf from branch 'master'
- install: Fedora installation script update
An update of the Fedora installation scripts for versions 24,25 and 26.
Change-Id: Ib510d78f4040e1029bc68d2fa303a4c0a6357de3
Signed-off-by: Richard Elias <richardx.elias@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Merge "Fix rally db issue"
- Fix rally db issue
Also update "rally-manage db" to "rally db"
Change-Id: I0c9924b9869135d3492dfafe89d085813290f565
Signed-off-by: Linda Wang <wangwulin@huawei.com>
|
|
* Update docs/submodules/sfc from branch 'master'
- Add the needed functest files
As agreed with the functest project, we keep the Dockerfile
and testscases.yaml in our repo
Change-Id: Idb25d4bfff7e36b42e4981a138775f90b0fbe72e
Signed-off-by: Manuel Buil <mbuil@suse.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Fix the way of getting endpoint port
It will fail if the endpoint does not contain any port value when
executing self.os_auth_url.rsplit("/")[2].rsplit(":")[1]
JIRA: FUNCTEST-892
Change-Id: Iba4103884b7c6e3b157bb95d775fac02c32ae728
Signed-off-by: Linda Wang <wangwulin@huawei.com>
|
|
* Update docs/submodules/fuel from branch 'master'
- Merge "[baremetal] public gateway setup on prx nodes"
- [baremetal] public gateway setup on prx nodes
- prx: add route for public traffic to public interface
- prx: add route towards salt master through maas
- remove dashboard class from proxy node (already implements horizon)
- remove dashboard (and benchmark) class definitions (no longer used)
- (temporary) backport Pharos change for adapter template
JIRA: FUEL-305
Change-Id: Ia14a18ac0123c1134d8d99dc43da9a1f770001d0
Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
|
|
* Update docs/submodules/container4nfv from branch 'master'
- update opnfv/containter box
1. add flannel, calico, busybox, nginx and ubuntu in box,
2. use whole file instead of patch
3. deploy new box
Change-Id: I937e0df264ff7b639b4d6e8b7199f9502e502340
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
|
|
* Update docs/submodules/compass4nfv from branch 'master'
- Merge "Fix centos kickstart_done snippet"
- Fix centos kickstart_done snippet
Bug:
CentOS-7-Minimal-1611-x86_64 image doesn't contain
wget package and kickstart_done snippet use wget to
call cobbler api to set netboot enable to false.
This way if host installed centos which is not set
to boot from disk will stuck in pxe loop
Solution:
Use curl instead of wget in kickstart_done
Change-Id: I0414adab72047a367b7cb15fe6a5537c76234972
Signed-off-by: Harry Huang <huangxiangyu5@huawei.com>
|
|
* Update docs/submodules/compass4nfv from branch 'master'
- Merge "fix locale setting: Cannot set LC_ALL to default locale"
- fix locale setting: Cannot set LC_ALL to default locale
Change-Id: I050a17d5f61a31f8690b41bb70b2ea312aa50ab1
Signed-off-by: Di Xu <di.xu@arm.com>
|
|
* Update docs/submodules/compass4nfv from branch 'master'
- Merge "deploy/conf: support configurable docker registry"
- deploy/conf: support configurable docker registry
Set COMPASS_DOCKER_REPO to use docker repos other than the default
one for x86_64(docker.io/compass4nfv).
E.g., to deploy Arm servers, it can be set to "linaro" repo.
Change-Id: Ief939e94d4a324dccd1ccf4be4ac75afb2cb0c3e
Signed-off-by: Yibo Cai <yibo.cai@arm.com>
|
|
* Update docs/submodules/compass4nfv from branch 'master'
- Merge "build: support aarch64 deployment images"
- build: support aarch64 deployment images
- Use per architecture build-ARCH.yaml if available
- Repos for aarch64 OS and docker images are passed by env
Change-Id: Id7f9ca6dad690b8d375a3d8f488c7bf955a128ad
Signed-off-by: Yibo Cai <yibo.cai@arm.com>
|