summaryrefslogtreecommitdiffstats
path: root/docs/submodules
AgeCommit message (Collapse)AuthorFilesLines
2017-04-24Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/releng from branch 'master' - Apex: fix iso verify Change-Id: Ia1d6da64fa245407c5c71f7a56bb6d372fb11ebc Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-04-24Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[tacker] Adjust tackerc to v3 of identity api" - [tacker] Adjust tackerc to v3 of identity api JIRA: FUEL-267 Change-Id: Ia0e9ed3298681319c870132628d930175e084bc0 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Fix package missing on debian hosts Change-Id: I4cc5c78f1b33f17234bbcf4864b01c550dc0e487 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesJiang, Yunhong1-0/+0
* Update docs/submodules/kvmfornfv from branch 'master' - Merge "bnx2x: allow adding VLANs while interface is down" - bnx2x: allow adding VLANs while interface is down BugLink: http://bugs.launchpad.net/bugs/1616107 Since implementing VLAN filtering in commit 05cc5a39ddb74 ("bnx2x: add vlan filtering offload") bnx2x refuses to add a VLAN while the interface is down: # ip link add link enp3s0f0 enp3s0f0_10 type vlan id 10 RTNETLINK answers: Bad address and in dmesg (with bnx2x.debug=0x20): bnx2x: [bnx2x_vlan_rx_add_vid:12941(enp3s0f0)]Ignoring VLAN configuration the interface is down Other drivers have no problem with this. Fix this peculiar behavior in the following way: - Accept requests to add/kill VID regardless of the device state. Maintain the requested list of VIDs in the bp->vlan_reg list. - If the device is up, try to configure the VID list into the hardware. If we run out of VLAN credits or encounter a failure configuring an entry, fall back to accepting all VLANs. If we successfully configure all entries from the list, turn the fallback off. - Use the same code for reconfiguring VLANs during NIC load. Have to change the signed-off-by line to avoid spam to original people. S1gned off by: Michal Schmidt <mschmidt@redhat.com> @cked: Yuval Mintz <Yuval.Mintz@qlogic.com> S1gned off by: David S. Miller <davem@davemloft.net> (cherry picked from commit a02cc9d3cc9f98905df214d4a57e5918473260ea) S1gned off by: Tim Gardner <tim.gardner@canonical.com> @cked: Seth Forshee <seth.forshee@canonical.com> S1gned off by: Luis Henriques <luis.henriques@canonical.com> Upstream status: Backport Change-Id: Ibcc668daf4815bc984e2611d8c08856a0a7973f1 Backport-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
2017-04-24Update git submoduleshongbo tian1-0/+0
* Update docs/submodules/dovetail from branch 'master' - Merge "skip ha and rename tempest.conf" - skip ha and rename tempest.conf 1) ha testcases need node configure file, skip it temporarily 2) tempest.conf-->refstack_tempest.conf, then it will not covered by other tempest testcases, can used for users to debug Change-Id: Ieb7101d8c406e294755629fd11a686f90b6c0a7f Signed-off-by: MatthewLi <matthew.lijun@huawei.com>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Collect arithmetic metrics from unixbench Change-Id: I3e9ca649f3b35908c162d5036dcde3a333278f6d Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Save logs before collecting Change-Id: I0e39103ef917fa7ea86d5c47de0cc71c37fca74c Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Unify workdir - use role variable `workdir` - download dependencies to remote workdir with checksum Change-Id: I2a7991e014e365fec532520c2b57a3fe480914d8 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Cleanup metrics report Change-Id: I79b56d7490930db171fe93e314be4f6d73b0063b Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Add support for render a justified output from list and dict Change-Id: I4411e62b3d1a067cfa8ae1296cf521877aedb830 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Organize **all** tasks into ansible role `qtip` Change-Id: I5d3852d2a31e9c4043191377e5cb7d539d222a8c Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesMaryam Tahhan1-0/+0
* Update docs/submodules/barometer from branch 'master' - Merge "dpdk stats: add known issues/limitations" - dpdk stats: add known issues/limitations Change-Id: I8dbd43002f50e65df40cc8bfb516c40f995b9679 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2017-04-24Update git submodulesxudan1-0/+0
* Update docs/submodules/dovetail from branch 'master' - Bugfix about the ipv6 results checker JIRA: DOVETAIL-404 1. IPV6 sub-testcase's name includes [id], which will affects the regex. 2. Remove the [id] from the name of the sub_testcases. Change-Id: I51b567e8382fa4e701f8b32ba7ea195d49fd31eb Signed-off-by: xudan <xudan16@huawei.com>
2017-04-24Update git submodulesRex Lee1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "operation_general: fix logging to use %s" - operation_general: fix logging to use %s Change-Id: I1b37cbf07e8858ca3e75bb74c57fe84485ff4989 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-04-24Update git submodulesRex Lee1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "standardize ssh auth" - standardize ssh auth we need to be following defautl paramiko rules, first use pkey, then key_filenames (autodetecting ~/.ssh/ keys), then password We have too much boilerplate redudant code everywhere, we need to standardize on a factory function that takes a node dict. Using Python3 ChainMap we can layer overrides and defaults. VNF descriptors have to default key_filename, password to Python None. The only way to do this is to omit key values if the variable is not defined, this way the dict will not have the value and it will default to Python None Add python2 chainmap backport Updated unittest mocking to use ssh.SSH.from_node Change-Id: I80b0cb606e593b33e317c9e5e8ed0b74da591514 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-04-24Update git submodulesRex Lee1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Add a new runner to test end-to-end fast data path" - Add a new runner to test end-to-end fast data path This runner caters testing fast host data path (e.g. SRIOV) plus fast VM data path (VM running pktgen-dpdk). It is implemented as a new flavor of the existing Iteration runner. (1) Add a new SLA action rate-control (2) While the SLA target is not met, reduce packet rate until packet loss target is met. Change-Id: I633f391f1790f03ff31458458d79d3f272475ab5 JIRA: YARDSTICK-615 Signed-off-by: Jing Zhang <jing.c.zhang@nokia.com>
2017-04-24Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/releng from branch 'master' - Apex: fixes iso verify/upload Change-Id: I25baff8b74bf26903e5196f31b9f47dab94fd048 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Organize results in folder named with pod and current date Change-Id: I0882fb4548c3c3a6a72c6f752f8074e553ee3748 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Rename folders * copy -> defaults * render -> custom * roles -> ansible_roles Change-Id: Ia96214691873f3bd8e6c5f9f433292fd912ac46e Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-24Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Fix bug on apex missing repository configuration and packages Change-Id: I929e3bafced56b2ab8fd90edc21421bd7bde2073 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-23Update git submodulesKubi1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Add SRIOV support" - Add SRIOV support A generic provider network solution is introduced. To identify whether a network specified in the test case is a provider network new attributes are introduced in the test case network section: networks: test-net: cidr: '192.168.1.0/24' provider: "sriov" physical_network: 'physnet1' If the "provider" attribute is present, the network is an existing provider network. If the value is "sriov", binding:vnic_type=direct is added to the interface in the heat deployment template. In orchestrator/heat.py, the interface creating functions are given a new parameter that tells if the network in use is a provider network. The benchmark/contexts/model.py is changed to store the value of the provider attribute from the test case and function calls to port creation is updated with the provider parameter. The same change is made in contexts/heat.py as well. Also calls for creating a new tenant network is replaced for creating a new provider network if the provider attribute is present. Update-1: Change test_model.py Update-2: Per comment, change comment style to """" Update-3: Change test_heat.py Update-4: Add unit test cases to pass coverage test Update-5: Add SRIOV provider network example in opnfv_yardstick_tc008.yaml Update-6: Per comment, remove empty line in orchestrator/test_heat.py Update-7: Per comment, change comment lines in orchestrator/test_heat.py Update-8: Add more unit test cases to pass coverage test Update-9: Change to create SRIOV provider network on the fly so as to support co-current test runs Update-10: Per comment, init physical_network to 'physnet1' Change-Id: I76004c4fcc9bffcfd8ed021fd647e0cecb346ef4 JIRA: YARDSTICK-612 Signed-off-by: Jing Zhang <jing.c.zhang@nokia.com>
2017-04-23Update git submodulesZhijiang Hu1-0/+0
* Update docs/submodules/daisy from branch 'master' - Solve "Buffer I/O error on dev loop0p1" error message This add "losetup" before "kpartx -l" command, otherwise, we encountered many "Buffer I/O error on dev loop0p1, logical block 104854018, async page read" in dmesg. But they are seems no harm. No need to do "losetup -d" after "losetup", because "kpartx -dv" will do that for us. Change-Id: I326ef35a241d8b09f0f3f3fc90ef749df3f4768f Signed-off-by: Zhijiang Hu <hu.zhijiang@zte.com.cn>
2017-04-22Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/releng from branch 'master' - Apex: fix iso verify Change-Id: I212437ebec64aa8521ad95c5b57a7824476a4580 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-04-22Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Updates quagga to newer version" - Updates quagga to newer version Change-Id: I635b171c15bca40788eefe909eaab3e9d4606db1 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-04-21Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - f_repobuild: Add remaining packages explicitly Packetary automatically solves for Fuel@OPNFV: - base pkgs and their deps; - bootstrap/target image additional pkgs; - explicit reqs; However, corner cases like "pcs", which is not in any of the above categories - being installed via puppet only, need to be added to the explicit list. NOTE: This enables full offline deploys for simple scenarios (i.e. without any plugins). Each plugin might need additional packages, which will be handled in further patches. See the bug report for more information. JIRA: FUEL-250 Change-Id: Id1d31c98308cdee6cb935627984188561b560ff4 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-04-21Update git submoduleszhihui wu1-0/+0
* Update docs/submodules/qtip from branch 'master' - correct document of module apex_generate_inventory Change-Id: I10bfd526e377ae02d2f6cf6d60d82fbb175ac431 Signed-off-by: zhihui wu <wu.zhihui1@zte.com.cn>
2017-04-21Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Switch testcase to test case in docstrings Change-Id: Iea64673788a3d5ab5eb3028522f659de183440ed Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2017-04-21Update git submoduleshongbo tian1-0/+0
* Update docs/submodules/dovetail from branch 'master' - Merge "add defcore/ha testcases to proposed_tests" - add defcore/ha testcases to proposed_tests JIRA: DOVETAIL-398 JIRA: DOVETAIL-399 1. this testsuite will run in community CI, see https://gerrit.opnfv.org/gerrit/#/c/33509/ 2. HA testcases please see https://wiki.opnfv.org/pages/viewpage.action?pageId=8684344 3. vimops testcases deleted, since it's covered in defcore Change-Id: Ied9c8867e0aa99e33fd213030e6471aa5cfb86e8 Signed-off-by: MatthewLi <matthew.lijun@huawei.com>
2017-04-21Update git submodulesxudan1-0/+0
* Update docs/submodules/dovetail from branch 'master' - use Functest tempest_custom test cases to run all Ipv6 test cases JIRA: DOVETAIL-401 1. modify all Ipv6 test cases, change tempest_smoke_serial/tempest_full_parallel into tempest_custom, add ID of each sub-testcases. 2. Some sub-testcases in ipv6.tc002, ipv6.tc003, ipv6.tc004 and ipv6.tc005 can not be found in the full tempest test case list. 2. disable testcases' script_result_acquired to enable tempest_custom run multiple times. 3. use build_tag-testcase_name(such as daily-master-79a6e392-28bb-4c40-9d88-a03bed99da2d-dovetail.ipv6.tc025) as the unique ID of each testcase. 4. comment out the progress bar, because it has some problems when print the report text. 5. Functest has changed the TEST_DB_URL from http://<testapi>:<port>/apv/v1 to http://<testapi>:<port>/apv/v1/results. 6. Functest has changed the TEST_DB_URL to file://<file_path>/<file_name>. see https://gerrit.opnfv.org/gerrit/#/c/33511/ Change-Id: I524f6702377f215f526158214842481eb44565be Signed-off-by: xudan <xudan16@huawei.com>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Dump unixbench results without top folder Change-Id: Ic86e03643c7d6720d6de13e8749ebe0208ab9391 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Fix issues when running qtip first time - results folder not created - hostkey check should be skipped Change-Id: I658f5c459617d1651eec360edd53a8766f7387c1 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Add AES testing in SSL metrics Change-Id: Iee1b1711d9ce07c468bc390966c55bd49abea228 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Set default folder for dump data Change-Id: I2b96bcf369b13a679a417d78ebca19b3e63155e2 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Organize testapi tasks into ansible roles Change-Id: If073401b94e7146521fb54a85470b931e458de3c Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Cleanup customizable variables of workspace Change-Id: I00185b7c73692e2aeafb1307cea81f4f2d149c74 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Group test results and report under node Change-Id: I66286787d06c5012c6dcf516cffb9f6fd76522c5 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Add comments about workspace parameters Change-Id: I45f7547a15b66b6901cb5a298e3f097cd6d2257d Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Reorganize benchmarking tasks into ansible roles which helps to - group task with related templates and variables - simplify the main playbook to improve readability See: http://docs.ansible.com/ansible/playbooks_roles.html Change-Id: I9d3180edaac83ee9dba85ce5ac14ff574af7a905 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submoduleschenjiankun1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Yardstick virtualenv support JIRA: YARDSTICK-620 In the patch, I separate python-setuptools from install.sh and separate appdirs from requirements.txt because there will be error when install them in virtualenv. Also I will update the documentation when this patch merged; Change-Id: I99a532d1851983775869e7c5e8e65fd0229e86df Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
2017-04-21Update git submodulesJun Li1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "dovetail: Change CI jobs to run test suite "proposed_tests" instead of "debug"" - dovetail: Change CI jobs to run test suite "proposed_tests" instead of "debug" JIRA: DOVETAIL-397 now, team decide to use proposed_tests suite instead of debug Change-Id: Iff8ec0b32a24e51bc2d2536605c9867b94f8921c Signed-off-by: MatthewLi <matthew.lijun@huawei.com>
2017-04-21Update git submodulesSerena Feng1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Minor changes in docstrings" - Minor changes in docstrings It removes case_name from the list of attributes that run() must set because it's now managed by run_tests.py (see __init__()) Change-Id: Id6228880257d0e9fb27483c56aa9985197feb04e Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2017-04-21Update git submodulesJose Lausuch1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Ignore _build (sphinx output dir)" - Ignore _build (sphinx output dir) Change-Id: I8afb00fb2942d2144968896981532324ac8e322d Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2017-04-21Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Remove exec right for ci config files" - Remove exec right for ci config files Change-Id: Ibf7e549252234fb69dd6e0cc7920b66759469aea Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2017-04-21Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Fix pylint warnings in decorators.py" - Fix pylint warnings in decorators.py Change-Id: Ie6c53feb97053248c909d641753b44b5f51c8719 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2017-04-21Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Stop hardcoding results suffix in push_to_db" - Stop hardcoding results suffix in push_to_db Adding results in url is useless as it is defined in results section in config_functest.yaml. It allows defining the full name in case of dumping to file (see decorator.py). The commented local file is the value required by dovetail. Co-Authored-By: Cédric Ollivier <cedric.ollivier@orange.com> Change-Id: I35ba9b34d99e138292f099934e28585ee8b85604 Signed-off-by: MatthewLi <matthew.lijun@huawei.com> Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2017-04-21Update git submodulesboucherv1-0/+0
* Update docs/submodules/functest from branch 'master' - [VNF_base] Support existing tenant and user Support existing tenant and user with a get_or_create_tenant method. If the tenant and user already exist it only get the id of those JIRA: FUNCTEST-799 Change-Id: Id5daf2904592e42199471bdd3547e861e6db6e32 Signed-off-by: boucherv <valentin.boucher@orange.com>
2017-04-21Update git submodulesMatthewLi1-0/+0
* Update docs/submodules/dovetail from branch 'master' - fix tox error see logs https://build.opnfv.org/ci/job/dovetail-verify-master/560/console Change-Id: Ifa66087c4c8fcbaae809aae380587a4f03eded6c Signed-off-by: MatthewLi <matthew.lijun@huawei.com>
2017-04-21Update git submodulesyuyang1-0/+0
* Update docs/submodules/bottlenecks from branch 'master' - Bugfix of docker-compose file for privileged JIRA: BOTTLENECK-163 privileged option in docker-compose file should be true to avoid "permission deny" error when accessing directories Change-Id: I1a57146236efb5fe71405c5b7682af706a8814bf Signed-off-by: yuyang <Gabriel.yuyang@huawei.com>
2017-04-21Update git submodulesYujun Zhang1-0/+0
* Update docs/submodules/qtip from branch 'master' - Merge "Fix workspace creator" - Fix workspace creator - handle relative path in workspace - handle differences between installers - create working directories Change-Id: I5fbe66c1218c29db0fafd87085a6cf5c15a91dc5 Signed-off-by: Yujun Zhang <zhang.yujunz@zte.com.cn>
2017-04-21Update git submoduleshongbo tian1-0/+0
* Update docs/submodules/dovetail from branch 'master' - Merge "put dovetail test result back in log and not generte report file" - put dovetail test result back in log and not generte report file Change-Id: I2da5e7844f5ce034d4c0cfaa4592e6cd47002049 Signed-off-by: MatthewLi <matthew.lijun@huawei.com>