summaryrefslogtreecommitdiffstats
path: root/docs/submodules
AgeCommit message (Collapse)AuthorFilesLines
2017-11-22Update git submodulesNarinder Gupta1-0/+0
* Update docs/submodules/joid from branch 'master' - add pod19 without vlan. Change-Id: I0764f19e0389921a7240802ebce0c484837f19ee Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>
2017-11-22Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Add br-vlan-veth to the br-vlan bridge in openSUSE br-vlan-eth was created but not added to any bridge, therefore floating ips were not working as it was impossible for the OVS in the compute to get the ARP messages coming from the gateway of the public network Change-Id: Ia0828b7e96359dc10012ac52bf0e5d4f2c5419cb Signed-off-by: Manuel Buil <mbuil@suse.com>
2017-11-22Update git submodulesAric Gardner1-0/+0
* Update docs/submodules/pharos from branch 'master' - Merge "generate_config: Use eyaml to decrypt secret values" - generate_config: Use eyaml to decrypt secret values Note: IDF data encryption is not supported. Supporting that is trivial, but it leads to slightly more complicated code, plus it breaks support for multiline scalar encrypted data in the PDF ('>'), forcing us to define each encrypted value as inline string. While at it, fix silly limitation of jinja2 path residing in a subdir of CWD. Change-Id: I441ec754d8b6e4aad2ed73aba0b9b18ed65f05f4 Signed-off-by: agardner <agardner@linuxfoundation.org> Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-11-22Update git submodulesIgor Shaula1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - correct prox ipsec vnf reapply the latest changes (47355 and 47521) due to gerrit merge problem * fix crypto init for both encryptor and decryptor * improve performance: preallocate crypto op memory in init * finalize enabling routed ipsec traffic (proper IP/MAC addresses) * correct handling of dropped packets at encryptor * Fix receive packets with size > 1024 bytes Change-Id: I51cccc9bef0b9564ea1a3465ad28fb985eee06d1 Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2017-11-22Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "ci/deploy.sh: Add new `-E` arg for env erase" - ci/deploy.sh: Add new `-E` arg for env erase NOTE: In order to undefine VCP VMs with NVRAM (e.g. AArch64 VMs using AAVMF), an additional parameter should be passed to libvirt by Salt virt core module (equivalent to `virsh undefine --nvram`). While at it, pass CI_DEBUG, ERASE_ENV enviroment variables to state execution, and stop force-applying patches. Also refactor the rsync between foundation node and Salt master, so the whole git repo is copied as </root/opnfv>, and <root/fuel> becomes a link to it; useful for Armband, where 'fuel' is a git submodule. Fix .git paths after rsync, so git submodules work as expected in cfg01 repos. JIRA: FUEL-307 Change-Id: Ic62f03e786581c019168c50ccc50107238021d7f Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-11-22Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - [virtual] Apply nova controller state twice In order to complete broken database sync run nova state on controller one more time. Change-Id: I761f26667ebb531b848a62e096f3d79f588d9f24 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-11-22Update git submodulesThomas Duval1-0/+0
* Update docs/submodules/moon from branch 'master' - push the modifications from moonv4/templates/moonforming to moonv4/tests Change-Id: Id9abe1c299f2cfbf95c5026d74ccb74c1429834e
2017-11-22Update git submodulesThomas Duval1-0/+0
* Update docs/submodules/moon from branch 'master' - Add more control on Keystone exceptions Change-Id: I1db596b0b7df7344d8cdc40768c7ee6373905c34
2017-11-22Update git submodulesThomas Duval1-0/+0
* Update docs/submodules/moon from branch 'master' - Update to the v4.3.1 container Change-Id: I2fd986beb684d270e2c0c5fb718413c3e5822ad0
2017-11-22Update git submodulesThomas Duval1-0/+0
* Update docs/submodules/moon from branch 'master' - Update to the v4.3.1 container Change-Id: I42c49a5211e6fb9b6b35891580780cfea2a0b034
2017-11-22Update git submodulesThomas Duval1-0/+0
* Update docs/submodules/moon from branch 'master' - Add an argument to control the verbose or debug mode and update to the container v1.2 Change-Id: I4f85dbd6cde4e8eb9b39f0fd13cddb0d33da8a76
2017-11-22Update git submodulesThomas Duval1-0/+0
* Update docs/submodules/moon from branch 'master' - Add waiting code for Keystone, re-add the ability to connect a PDP to the "admin" Keystone project and fix some bugs Change-Id: Ic3afdb1306a72bd09f9071e96aabfae602153e94
2017-11-22Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Removal of deprecated SNAPS-OO classes." - Removal of deprecated SNAPS-OO classes. JIRA: SNAPS-202 Change-Id: I115b4927b287a5525f4c1b95128d91f5229c7856 Signed-off-by: spisarski <s.pisarski@cablelabs.com>
2017-11-22Update git submodulesSerena Feng1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "Enlarge the timeout for storage test" - Enlarge the timeout for storage test It seems we need to give more time for storage test. That job has been aborted by timeout those days.[1] [1] https://build.opnfv.org/ci/view/qtip/job/qtip-storage-apex-master/97/console Change-Id: Iafef11d38a83c95e8bf82c4b6664716f4e8de535 Signed-off-by: zhihui wu <wu.zhihui1@zte.com.cn>
2017-11-22Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: config: pinned-versions: Bump Bifrost SHA Change-Id: I9df869fa82f4486b104f4330b83e8300362afb54 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-11-22Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Remove the share flag When creating the external network for functest testing purposes, it does not need to be shareable between tenants because functest uses routers and floating ips. Therefore, better remove it to avoid confusion Change-Id: I18a1fd34a52ddae2527ee3580a9d1a2b649e61b6 Signed-off-by: Manuel Buil <mbuil@suse.com>
2017-11-22Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Use the dib pip-and-virtualenv element The element will ensure that we have a reasonable set of pip and virtualenv packages in place as well as pick the right python version for the distribution. We also make sure that we use python2 everywhere. Change-Id: I8a83af9acffbd8d6d583832956e1685100ec508a Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-11-22Update git submodulesAlex Yang1-0/+0
* Update docs/submodules/pharos from branch 'master' - Fix yamllint warning for daisy template Change-Id: I4b9a9a569d22570f027a49bc31736f6787177171 Signed-off-by: Alex Yang <yangyang1@zte.com.cn>
2017-11-22Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trex_stat_packet_counts: Add packet counts to trex reporting" - trex_stat_packet_counts: Add packet counts to trex reporting Adds packet count totals for transmit and receive to reporting at the end of test execution. JIRA: VSPERF-546 Change-Id: I51027fae109d0ea794c0db03f5781ddb2fcbb941 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-11-22Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "added for master branch and new scenarios." - added for master branch and new scenarios. Change-Id: I78ef43217896d2f7daa4df1a665c7be6bc14c088 Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>
2017-11-22Update git submodulesRutuja Surve1-0/+0
* Update docs/submodules/bottlenecks from branch 'master' - Cadvisor Client-Server installation automation script JIRA: BOTTLENECK-181 Automated the installation for cadvisor client from jump server host and added docker installation of cadvisor in monitoring script. Change-Id: I906b5237bc0ed320106309c1a29e8dd72a05a427 Signed-off-by: Rutuja Surve <rutuja.r.surve@gmail.com>
2017-11-22Update git submodulesRutuja Surve1-0/+0
* Update docs/submodules/bottlenecks from branch 'master' - Collectd Client-Server installation automation script JIRA: BOTTLENECK-181 Automated the installation for collectd client from jump server host and corrected docker versions in monitoring script Change-Id: I14ec20f2761c72e261aa1185a381f0c02b84ed45 Signed-off-by: Rutuja Surve <rutuja.r.surve@gmail.com>
2017-11-22Update git submodulesGuo Ruijing1-0/+0
* Update docs/submodules/container4nfv from branch 'master' - add examples for container4nfv 1. add example for kubeadm with weave 2. add example for kubeadm with multus 3. add example for kubeadm with ovsdpdk 4. add example for kubeadm with virtlet Change-Id: I138e71e45f0aba8389dca0e1a826f4662572af29 Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2017-11-22Update git submodulesBryan Sullivan1-0/+0
* Update docs/submodules/ves from branch 'master' - More dashboard improvements JIRA: VES-2 Change-Id: I1373255d253f8fadae5a0c74aeb789369c92460f Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>
2017-11-22Update git submodulesBryan Sullivan1-0/+0
* Update docs/submodules/ves from branch 'master' - Add more collectd data to influx/grafana JIRA: VES-2 Disable uuid for "node" mode Change-Id: I055db4f52eee7a61438a4e7e63740b42dc3f1777 Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>
2017-11-22Update git submodulesSerena Feng1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "Add the pod info to the job name" - Add the pod info to the job name Since fetch_os_creds.sh has a judgement with BUILD_TAG, I add the pod info for it. Change-Id: I248be530d15bb807dcf9fec1fe924d698a8f56ab Signed-off-by: zhihui wu <wu.zhihui1@zte.com.cn>
2017-11-21Update git submodulesLinda Wang1-0/+0
* Update docs/submodules/releng from branch 'master' - Clean Functest images for CI jobs on ARM Change-Id: I3e9d8122bf67296d6270583efeda34ac64e21e68 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2017-11-21Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/armband from branch 'master' - u/fuel: Fix patch apply failure after latest bump Change-Id: I7e05e05551bb1dee8f531e12fd60b85dcc67e695 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-11-21Update git submodulesIgor Shaula1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - fix prox crypto build Change-Id: I4ea54763871c18b1bd6cec9dbb926f18f0f5833f Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2017-11-21Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for nop mode with l3 submode" - Add support for nop mode with l3 submode The l3 submode was not supported in nop mode, as the nop mode uses some specific nop thread (and not generic). When L3 is specified, the nop mode must use the generic thread. In addition the l3 submode is implemented differently than other submodes. It is not supported through task_init structures (i.e. each task does not have to explicitely tell that it supports l3 submode). But this prevented to run both a nop with no submode and a nop with a l3 submode. Note that nop with l3 is usually not very useful - it handles arp (requests and response) but as nop, it does not swap IP addresses. So with a real switch, the packets transmitted will be received back... and l3 mode is usually mainly usefull when using a switch. However, there is at least one nop mode where l3 submode makes sense: when the nop does not transmit. In such cases, for instace used in conjunction with a gen l3, the nop receives all packets and forward the arp requests and responses to the master for handling. Change-Id: I992121db285ba25a11cbb494092a6afc6fe55a58 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2017-11-21Update git submodulesIgor Shaula1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - * fix encryption: ESP packet format * fix traffic routing * enqueue packets in a bulk (improve crypto performance: TBD) * improve code clarity * fix crypto dequeuing * complete decryption path implementation * NOTE: the code works in a chain mode; crypto init to be fixed next Change-Id: I058a906f4f4f5691ebf25d2cdf5b5faded88e11d Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2017-11-21Update git submodulesspisarski1-0/+0
* Update docs/submodules/snaps from branch 'master' - Refactoring of SecurityGroupSettings to extend SecurityGroupConfig SecurityGroupSettings, SecurityGroupSettings and neutron_utils have a runtime cyclical dependency. This patch reduces this dependency and deprecates the SecurityGroupSettings and SecurityGroupRuleSettings class with snaps.config.security_group SecurityGroupConfig and SecurityGroupRuleConfg classes JIRA: SNAPS-224 Change-Id: I6cd82ed5be31f4a24449be767b203e86489b1962 Signed-off-by: spisarski <s.pisarski@cablelabs.com>
2017-11-21Update git submodulesBryan Sullivan1-0/+0
* Update docs/submodules/ves from branch 'master' - Fix missing folder name JIRA: VES-2 Change-Id: Ie5522a9f6b84cdd7ef53fa264d65aef60b4b41dd Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>
2017-11-21Update git submodulesBryan Sullivan1-0/+0
* Update docs/submodules/ves from branch 'master' - Switch from guest to node mode. JIRA: VES-2 Change-Id: I3e61f7f226fe05c79a0f91cc97b8a8ad685ff4ea Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>
2017-11-21Update git submodulesLinda Wang1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Fix "Broken pipe" IOErrors of rally run" - Fix "Broken pipe" IOErrors of rally run Replace obsolete os.popen with subprocess module usage in command output retrieval. Do not use shell as the program to execute. Change-Id: Ic63bb0f393750c3b85a35a37fecd46c1c1b96602 Signed-off-by: Juha Kosonen <juha.kosonen@nokia.com>
2017-11-21Update git submodulesting wu1-0/+0
* Update docs/submodules/armband from branch 'master' - u/fuel: Bump & rebase for latest version This is to include public gw on prx nodes Change-Id: I6dbab7ae8e3ddb1df46f908acf53eeefb5680af2 Signed-off-by: ting wu <ting.wu@enea.com>
2017-11-21Update git submodulesspisarski1-0/+0
* Update docs/submodules/snaps from branch 'master' - Refactoring of VmInstanceSettings to extend VmInstanceConfig VmInstanceSettings, FloatingIPSettings and nova_utils have a runtime cyclical dependency. This patch reduces this dependency and deprecates the VmInstanceSettings and FloatingIPSettings class with snaps.config.vm_inst VmInstanceConfig and FloatingIpConfg classes JIRA: SNAPS-218 Change-Id: I95688130256bca1df4a5c347bdb741019ae0937e Signed-off-by: spisarski <s.pisarski@cablelabs.com>
2017-11-21Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "sriov: Determine path to the bind-tool" - sriov: Determine path to the bind-tool In case of SRIOV path to the bind-tool must be known before NIC driver is re-initialized. It means before TestCase.__init__() is called. Change-Id: Ib6fdba233e665144510dd492462c0a21aa19ed71 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-21Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "regression: OVS/DPDK regression tests" - regression: OVS/DPDK regression tests A set of regression tests for verification of OVS/DPDK features was introduced. Following features are tested: * DPDK NIC Support * DPDK Hotplug Support * RX Checksum Support * Flow Control Support * Multiqueue Support * Vhost User * Virtual Devices Support * NUMA Support * Jumbo Frame Support * Rate Limiting * Quality of Service JIRA: VSPERF-539 Change-Id: I6c83e9c38e29f197a5236ac68c88d7045fef775b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com> Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-21Update git submodulesRichard Elias1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - install: Fedora installation script update An update of the Fedora installation scripts for versions 24,25 and 26. Change-Id: Ib510d78f4040e1029bc68d2fa303a4c0a6357de3 Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-21Update git submodulesLinda Wang1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Fix rally db issue" - Fix rally db issue Also update "rally-manage db" to "rally db" Change-Id: I0c9924b9869135d3492dfafe89d085813290f565 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2017-11-21Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/sfc from branch 'master' - Add the needed functest files As agreed with the functest project, we keep the Dockerfile and testscases.yaml in our repo Change-Id: Idb25d4bfff7e36b42e4981a138775f90b0fbe72e Signed-off-by: Manuel Buil <mbuil@suse.com>
2017-11-21Update git submodulesLinda Wang1-0/+0
* Update docs/submodules/functest from branch 'master' - Fix the way of getting endpoint port It will fail if the endpoint does not contain any port value when executing self.os_auth_url.rsplit("/")[2].rsplit(":")[1] JIRA: FUNCTEST-892 Change-Id: Iba4103884b7c6e3b157bb95d775fac02c32ae728 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2017-11-21Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[baremetal] public gateway setup on prx nodes" - [baremetal] public gateway setup on prx nodes - prx: add route for public traffic to public interface - prx: add route towards salt master through maas - remove dashboard class from proxy node (already implements horizon) - remove dashboard (and benchmark) class definitions (no longer used) - (temporary) backport Pharos change for adapter template JIRA: FUEL-305 Change-Id: Ia14a18ac0123c1134d8d99dc43da9a1f770001d0 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2017-11-21Update git submodulesGuo Ruijing1-0/+0
* Update docs/submodules/container4nfv from branch 'master' - update opnfv/containter box 1. add flannel, calico, busybox, nginx and ubuntu in box, 2. use whole file instead of patch 3. deploy new box Change-Id: I937e0df264ff7b639b4d6e8b7199f9502e502340 Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2017-11-21Update git submodulesJustin chi1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Merge "Fix centos kickstart_done snippet" - Fix centos kickstart_done snippet Bug: CentOS-7-Minimal-1611-x86_64 image doesn't contain wget package and kickstart_done snippet use wget to call cobbler api to set netboot enable to false. This way if host installed centos which is not set to boot from disk will stuck in pxe loop Solution: Use curl instead of wget in kickstart_done Change-Id: I0414adab72047a367b7cb15fe6a5537c76234972 Signed-off-by: Harry Huang <huangxiangyu5@huawei.com>
2017-11-21Update git submodulesJustin chi1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Merge "fix locale setting: Cannot set LC_ALL to default locale" - fix locale setting: Cannot set LC_ALL to default locale Change-Id: I050a17d5f61a31f8690b41bb70b2ea312aa50ab1 Signed-off-by: Di Xu <di.xu@arm.com>
2017-11-21Update git submodulesJustin chi1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Merge "deploy/conf: support configurable docker registry" - deploy/conf: support configurable docker registry Set COMPASS_DOCKER_REPO to use docker repos other than the default one for x86_64(docker.io/compass4nfv). E.g., to deploy Arm servers, it can be set to "linaro" repo. Change-Id: Ief939e94d4a324dccd1ccf4be4ac75afb2cb0c3e Signed-off-by: Yibo Cai <yibo.cai@arm.com>
2017-11-21Update git submodulesJustin chi1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Merge "build: support aarch64 deployment images" - build: support aarch64 deployment images - Use per architecture build-ARCH.yaml if available - Repos for aarch64 OS and docker images are passed by env Change-Id: Id7f9ca6dad690b8d375a3d8f488c7bf955a128ad Signed-off-by: Yibo Cai <yibo.cai@arm.com>
2017-11-21Update git submodulesJustin chi1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Merge "cobbler: support aarch64" - cobbler: support aarch64 Set ADAPTER_OS_PATTERN='(?i)CentOS-7.*arm.*' to deploy CentOS aarch64. Change-Id: I943e2edfc03b92446fb393c63c254ab8e3c37225 Signed-off-by: Yibo Cai <yibo.cai@arm.com>