summaryrefslogtreecommitdiffstats
path: root/docs/submodules/yardstick
AgeCommit message (Collapse)AuthorFilesLines
2017-10-20Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - DRAFT: update release notes for Euphrates Change-Id: I7e437612ca52b75b71e38962a84d0dcdb453d5dd Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit 540659ee051d8c5b570541e1e4e0b92fa8b0e2ec)
2017-10-20Update git submodulesJing Lu1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "Add missing RFC2544 Ethernet frame sizes" into stable/euphrates - Add missing RFC2544 Ethernet frame sizes RFC2544 tests should include the following frame sizes: 9.1 Frame sizes to be used on Ethernet 64, 128, 256, 512, 1024, 1280, 1518 Change-Id: I6ab9cccf2bb3b2678f50da157a9a49c0d9564cbd Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com> Reviewed-by: Alain Jebara <alain.jebara@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ross Brattain <ross.b.brattain@intel.com> Reviewed-by: Edward MacGillivray <edward.s.macgillivray@intel.com> (cherry picked from commit 7046a9139a60e0bc3e65f5dc6dcb8e6999528136)
2017-10-20Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - nsb_installation: updates JIRA: YARDSTICK-500 Change-Id: I6eef884ef6262abe49fc13bc353ca14a72a5b648 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Martin Banszel <martinx.banszel@intel.com> Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> (cherry picked from commit 97b961aee6653553c5a35ecee5cb766924cd10f1)
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - NSB: fix trex config to use dpdk port number From some reason Heat/Neutron is now creating interfaces such that xe0 and xe1 are swapped. xe0 fa:16:3e:38:c7:66 0000:00:05.0 xe1 fa:16:3e:2f:f3:e2 0000:00:03.0 this causes the DPDK port numbering to be swapped. xe0 is DPDK port 1 because it has higher PCI address xe1 is DPDK port 0 because it has lower PCI address. The VNF is configured correctly because it uses DPDK port numbers, whereas TRex was using interface list ordering. Modify trex_cfg.yaml to use DPDK port ordering. This also requires running generate_cfg() after setup() in instantiate() +------------------------------------+-------------------+------------------------------+--------+ | Name | MAC Address | Fixed IP Addresses | Status | +------------------------------------+-------------------+------------------------------+--------+ | vnf_0.yardstick-af5ccb47-xe0-port | fa:16:3e:66:a5:e4 | ip_address='10.1.0.7', | ACTIVE | | vnf_0.yardstick-af5ccb47-mgmt-port | fa:16:3e:fa:98:fe | ip_address='10.0.1.10', | ACTIVE | | tg_0.yardstick-af5ccb47-xe1-port | fa:16:3e:2f:f3:e2 | ip_address='10.1.1.9', | ACTIVE | | vnf_0.yardstick-af5ccb47-xe1-port | fa:16:3e:f3:1d:f5 | ip_address='10.1.1.4', | ACTIVE | | | fa:16:3e:e3:8c:65 | ip_address='10.0.1.1', | ACTIVE | | | fa:16:3e:ff:d1:b7 | ip_address='11.191.14.110', | N/A | | tg_0.yardstick-af5ccb47-xe0-port | fa:16:3e:38:c7:66 | ip_address='10.1.0.8', | ACTIVE | | | fa:16:3e:ff:53:5f | ip_address='11.191.14.101', | DOWN | | | fa:16:3e:23:5d:2c | ip_address='10.0.1.2', | ACTIVE | | tg_0.yardstick-af5ccb47-mgmt-port | fa:16:3e:7a:df:4e | ip_address='10.0.1.5', | ACTIVE | | | fa:16:3e:22:65:36 | ip_address='11.191.14.109', | N/A | +------------------------------------+-------------------+------------------------------+--------+ /sys/devices/pci0000:00/0000:00:03.0/virtio0/net/ens3/address:fa:16:3e:2f:f3:e2 /sys/devices/pci0000:00/0000:00:05.0/virtio2/net/ens5/address:fa:16:3e:38:c7:66 Change-Id: Iaef2c7d9a5af7f45bd805a8ad6ee545ce0495cb1 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit 7ed018cddf88ac1c5a92f71fa5e421e66d259bc0)
2017-10-19Update git submodulesAbhijit Sinha1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - BugFix: Negative dropped packets in Prox tests Removed the abs function which can potentially mask negative dropped packets. Dropped packets in Prox workload VNF = max((tx_packets - rx_packets), 0) Change-Id: I510a351e899cdf9a1f366d632b9f0528b1d9dcce Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> (cherry picked from commit a27278dacaa54ae60cd3bdfa6e6145643f76fa02)
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "Adding sample trex example" into stable/euphrates - Adding sample trex example Change-Id: I3b79d33dba5cc559634122a135ff469f054214fc Signed-off-by: Deepak S <deepak.s@linux.intel.com> (cherry picked from commit 255a77da00dd047ee0c5ab1e849cf7e6ce75ecf6)
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml updated" into stable/euphrates - tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml updated Change-Id: Ie9cee3e0567e771cbf11a9802bd33a420cc1ee7a Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit 041aeb7d3505e98af5b167a5ee05bb72c3c87a26)
2017-10-19Update git submodulesJing Lu1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "Docs: update new implemented APIs" into stable/euphrates - Docs: update new implemented APIs Change-Id: If6b70791213099d53c82993bd22ac9eed6000c32 Signed-off-by: JingLu5 <lvjing5@huawei.com> (cherry picked from commit a4e465a23a41dfee5419085c43ed21aee3a0d97c)
2017-10-19Update git submodulesJingLu51-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Bugfix: move opnfv_os-odl-fdio_dvr-noha_daily.yaml to 'test_suites' directory The opnfv_os-odl-fdio_dvr-noha_daily.yaml test suite file is wrongly put in Yardstick root directory, this patch moves this file to the 'test_suites' directory. Change-Id: Ib3f75845c7af658dc6f96ac2de737cfbd1faf15a Signed-off-by: JingLu5 <lvjing5@huawei.com> (cherry picked from commit 14050ee3f720eb6aafaca256fc7bd982ac127cc7)
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "Create the ovs-vswitchd logging directory" into stable/euphrates - Create the ovs-vswitchd logging directory Change-Id: Id7f55f7fcb2fec2866b76821595776908ac30c04 Signed-off-by: Martin Banszel <martinx.banszel@intel.com> (cherry picked from commit bdcae10b04debea07e4553aab6e4ce43011d5f62)
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - NSB: update vfw scale-out testcases Change-Id: I6bd8a87f70954f288975e3e73e3cfbd36ae561dc Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit 39ead7aee3610dddbdeae33a5776ae5b98dfabea)
2017-10-19Update git submodulesJingLu51-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - add CheckConnectivity scenario Change-Id: I9d246828790467c2a57ba410826ee9751fff89c5 Signed-off-by: JingLu5 <lvjing5@huawei.com> (cherry picked from commit 4712d72a570dc9e2799227d489ee41768881a06d)
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge changes from topic 'euphrates-sync-2017-10-18' into stable/euphrates * changes: tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex_correlated_scale_2: fix indent Hamonization of the titles of the documents (Testing group) scale-out testcase template - tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex_correlated_scale_2: fix indent bad YAML indent Change-Id: I6aaf53b9bbf6005b6be4c2d6c69cefd41949f8c6 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Hamonization of the titles of the documents (Testing group) Change-Id: I6065fb416a90544539316666aac92735ee84177a Signed-off-by: Morgan Richomme <morgan.richomme@orange.com> - scale-out testcase template use anonymous flavors force num_vnfs to int added provider network examples we have to disable port security for provider networks removed vld_id, not needed adjust num_vfs to allocate two physnets per VNF. fix for multiports Change-Id: Ic4c8314dc07f6295b9559188989d81058bb48eb0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "Resolve full path to adminrc file if full path is not provided" into stable/euphrates - Resolve full path to adminrc file if full path is not provided Change-Id: I7e9d8074b5d956c864a0b3264926eee89e66dc35 Signed-off-by: Charlie Kang <charlie.kang@intel.com> (cherry picked from commit baa6c60b3216a41978a136b9d32e054c52153935)
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "add VNF scale-up template" into stable/euphrates - add VNF scale-up template adjust worker_threads based on number of vcpus Change-Id: Ie5444a64c15711a0e813905c69581f189432fe0b Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit bc6c77102684f69bccdce8509723e00ef38c69cf)
2017-10-19Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - NSB: MultiPortConfig adjust start_core Change-Id: I8f4b6af898c9d3783f7b45471088a69e51c8baba Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-19Update git submodulesMaciej Skrocki1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Added required ubuntu packages to run IxLoad client To fully enable IxLoad, after installing the IXIA client, check /opt/ixia/ixload/<ver>/bin/ixloadpython and make sure you can run this cmd inside the yardstick container. Usually user is required to copy or link /opt/ixia/python/<ver>/bin/ixiapython to /usr/bin/ixiapython<ver>. Change-Id: I6bc633802ad6c70329581014ec89c75bb7f8d688 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - pmu mirror creation ansible error fix While creating the mirror for pmu event list generation, some of the links would fail, throwing error. This fixes that. Change-Id: I52e96b1a6eacb5a9611845e815ecff9052df168a Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com> - Enable static cgnapt functionality. Change-Id: Ie770ca69ebdc66589ed6ca5c25bfc9a75afb8938 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - BugFix: Fix to Load Balancer - Previously Dropped packets was acceptable Dropped packets were tolerated. Now no longer tolerated (except 0.01%) Change-Id: I69d4f1a84d82e03a091a61419fa05fea13176c1c Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> - validate_non_string_sequence: use six.string_types Change-Id: I7248d97a55974091daf20f0fba4b612101a0e4c5 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Disable spoof check on vfs in sriov setup Change-Id: I8577231c2e78776cb30f7f7ded353a4fbc585aaa Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Adding cpu set to enable affinity for given vcpu Change-Id: If2e079966939b7faa33d2833d81caad0a3669036 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Adding sample multi-port ansible script - trex - ixia - ixia correlated Change-Id: I7d1414227c27c2bb03454eac94592e07c434f070 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - fix invalid chracters in ansible scripts Change-Id: I3d1a491e4c0f0554a861d9bb24fbd0ac94835759 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Update the traffic profile to support sample multi-port Change-Id: Iaf8b3e0aa3855443b0628573a1df98d177f27c76 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Relocate iniparser to yardstick.network_services.helpers Change-Id: I1f457c9c24f2ca84dde61b64f58edaff8952670a Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> - BugFix: Fix to negative dropped packets appearing in results. As per defect: the "VNF packets dropped" time series is negative - negative number of packets dropped is not meaningful. Solution: Return a positive value. Change-Id: I358006a691f2d6b5954333b9f7a745aba97ae44f Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> - BugFix: limit the count to supported range in min/max In trex, giving count beyond the allowed range causes trex client to fail. Check the range and reset the count before starting the traffic Change-Id: I58e54f47edb5f249087b8f7178b807ddfb13b03c Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-10-18Update git submodulesJingLu51-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Docs: test case description for TC080 and TC081 JIRA: YARDSTICK-825 Change-Id: Ib2f8d0b88378c0dd0bd20ba38141a205fa7ae486 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-10-18Update git submodulesJingLu51-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Fio: support input job file configuration Change-Id: I4bb15a398819e54f7fb3e9eac17daa4059c03376 Signed-off-by: JingLu5 <lvjing5@huawei.com> (cherry picked from commit a5d0491b47fd1bab27fa603353861ea8eaba8da5)
2017-10-18Update git submodulesJingLu51-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - add opnfv_os-odl-fdio_dvr-noha testsutie for Apex Change-Id: Idd60153e6097cbef6513942653429d2ec96a8c17 Signed-off-by: JingLu5 <lvjing5@huawei.com> (cherry picked from commit b122091bcc2e780be3694cf0faa1b771994798f6)
2017-10-17Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - NSB: rename private->uplink, public->downlink in example Change-Id: Ieb8943a432a59375b7e68a708666ad4caa4affd2 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - resource: move make_resource_profile to ResourceProfile move factory method from Collector to ResourceProfile Change-Id: I1ddf3cffed7a3b2d45aa9cbffd3c0a5925c325d6 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-16Update git submodulesrexlee87761-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - bugfix: remove pod_name in host and unify host parameter for none-ha test case, use host to be parameter for ha test case, use attack_host as parameter Change-Id: I053df00adab17814dd54584a1ae081548163dc68 Signed-off-by: rexlee8776 <limingjiang@huawei.com> (cherry picked from commit 18b2c357c3d281fbdf5261958ef60abb98915486)
2017-10-16Update git submoduleschenjiankun1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Create test suite opnfv_os-nosdn-openbaton-ha_daily JIRA: YARDSTICK-823 We need to create test sutie opnfv_os-nosdn-openbaton-ha_daily.yaml to enable this scenario. Change-Id: Ia800a9c74aaecf0d73e6f0fd559630b741ad2432 Signed-off-by: chenjiankun <chenjiankun1@huawei.com> (cherry picked from commit 164d60cedff53c520e4c36a37cb1a02bf873f7fb)
2017-10-14Update git submodulesDeepak S1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Support to add multiple src/dst ports in flow Change-Id: I888a6029efaad8308de8df6b6787dd46af5f1c55 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - task: use CONF_FILE from constants I'm not sure why we hardcoded config_file when the CONF_FILE constant will work. Change-Id: I45a1dc17ac2b185c659725f55462214acb74838d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - collectd: set intel_pmu events path and OVS socket path switch from hardcoded path to dynamic path based on bin_path also enable proxy for install_collectd add barometer settings for virt and ovs_stats Change-Id: Id138aef548332a3e3fcb3963b746e7c9f10c0948 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Version changes for collectd, pmu-tools, intel_cmt_cat Bumping collectd version to include pmu plugin enablement, bounding pmu-tools and intel_cmt_cat to a commit-id Change-Id: I666d52c5574cec0caebb07535332984fa77e5b65 Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com> - NSB Prox Grafana dashboard updates JIRA: YARDSTICK-802 Updating the Grafana dashboards with common data format for all BM and Opensatck Prox tests and adding minor improvements - Correct the test description - Re-run the tests and verify that all the fields are graph correct - Label the axes correctly. eg: For Throughput added label "MPPS" Change-Id: I62b471926fe3c4c8876b70053a92d06f4373e296 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> - KVMFORNFV: To verify the execution of the bash script This patch is used to verify the parameters passed and the flow of qemu_migrate_benchmark.bash script to handle the bugs Change-Id: Ifc1bfa7a91a2eed178b9dc984c222074f06e0599 Signed-off-by: Navya Bathula <navyax.bathula@intel.com> - Move arp route tbl to script and update defailt vnf config files Change-Id: I8674caa15c9fc32cfacb17f558da5fb31094877e Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - cgnat: duplicate keys are not allowed the current ConfigParser does not handle duplicate keys in ini files. Change-Id: Iaafbbab740a809a59edfd93c84d0029ef10ac6f3 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - increase number of open files for collectd for collectd KPIs we need may need to open 10,000+ files one file for each core * number of CPU counters we read. Use the ansible pam_limits moules to increase the nofile setting. This should allow the VNF to boot with increased number of files open Change-Id: I46b75d5ca59e8e359c985a1e37daaee89897884c Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - task: drain background runner queues We were not draining the queues in the background runners. Modify the main runner_join loop to loop over all the runners and drain them. The runner join method does extra work for periodic actions so we can't change its behavior. Instead create a new poll() method and use that to check runner status Change-Id: I9466ba40a6a4c45c82cedff279cbb4817c6b66ad Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Bug in NSB Prox ACL Test 4 Port JIRA: YARDSTICK-802 Generator was incorrectly configured to generated traffic for p0, p1 (twice), and p3 Should be p0, p1, p2 and p3 Change-Id: Ib62a3c6523b1eda635b8c727c36e140fd480003e Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> - Updating NSBperf to print right testcase Change-Id: I7be7bc61624fa14eb552477bdc701a44d65e68b7 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - private-> uplink and public->downlink changing private and public to new uplink/downlink name Change-Id: I8c3f582ba5592418a397e2500e0b998c3eed54f2 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Enable intel_pmu plugin in collectd Change-Id: I62c6416e5c79d0b90880985bb5c076b65e34192e Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-10-13Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - ping: always save rtt data, influxdb ignore empty data If the SLA was failing we were raising AssertionError and not storing the rtt in the data dict. This caused influxdb parse errors because the data was empty. Fixup influxdb to ignore records with no data, so we don't try to parse no data. Change the ping logic to always record the rtt result even if the SLA was not met. Also fixup ping logic in cases where ping does not return results. If SLA is defined use SLA * 10 otherwise use large float that doesn't break the grafana scale too much, maybe 999999 JIRA: YARDSTICK-809 Change-Id: Id2d51216581644a80e8c7b9aa98919a766008adf Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit af011b16787e8fd9fc6f918b1d1427dd1be562ec)
2017-10-13Update git submodulesJingLu51-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Bugfix: Add opnfv_os-nosdn-ovs_dpdk testsuite for Compass4nfv Change-Id: I35e6471bb561eb773bd188b36b912969188955d2 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-10-13Update git submodulesJingLu51-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Bugfix: Add opnfv_os-odl_l2-moon-ha_daily testsuite for Compass4nfv Change-Id: I46c6b56e1293c3d594804d77a73c391922f03653 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-10-12Update git submoduleschenjiankun1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Change 'SUCCESS' to 'PASS' when report to MongoDB JIRA: YARDSTICK-822 To keep consistent with other testing project, we need to change 'SUCCESS' to 'PASS', 'FAILED' to 'FAIL'. Change-Id: I392e4dc6dd2e028cd43cba0d1bf8ee04618326d7 Signed-off-by: chenjiankun <chenjiankun1@huawei.com> (cherry picked from commit f4680c872fbb34816d809c41852740f5cb960fd1)
2017-10-12Update git submodulesJingLu51-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Bugfix: Reference for the tool used in TC044 mentioned in the user guide is wrong JIRA: YARDSTICK-821 Change-Id: I09b189008df4ec2e6db92cf24c45d8206ed2062f Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-10-12Update git submodulesJing Lu1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "Doc amendment: env prepare command" into stable/euphrates - Doc amendment: env prepare command JIRA: YARDSTICK-637 Change-Id: I7e5e1afb7b5a7e97aa070c03cded3be285d97cc2 Signed-off-by: JingLu5 <lvjing5@huawei.com> (cherry picked from commit d91ddc83daa7ac112c764e74621b48455d038e7f)
2017-10-12Update git submodulesAce Lee1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Use "protocol" parameters in iperf3 yaml and task file JIRA: YARDSTICK-755 There is a history problem that iperf use udp to set a net protocol. This code will change it to protocol. so you could use 'tcp','udp' and other protocol. Change-Id: I1a101013dfe58165a3ed08aa77f0aa2f73d57a12 Signed-off-by: Ace Lee <liyin11@huawei.com> (cherry picked from commit 10f85b332c4b1f55e651aeb9c45b328e1ebdc2af)
2017-10-10Update git submodulesJing Zhang1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - TC008 Interrupt Affinity Fix The smp_affinity takes hex mask, currently it is given hex number. Change-Id: Id738bfe10551dad1f5df48910a230b12f50d1b3d JIRA: YARDSTICK-818 Signed-off-by: Jing Zhang <jing.c.zhang@nokia.com> - Bugfix: Update HW lb config VNF thread to start from core 1 Change-Id: Ib0007fa3689b90346598baaef5c6e88d4fdf444a Signed-off-by: Deepak S <deepak.s@linux.intel.com> - install pmu tools collectd plugin Added review dependency, removed collectd commit-id replicating bash script, added pmu roles to playbook Create local mirror for event list generation, copy script to image, and run event list generation at runtime if intel_pmu is enabled. Change-Id: Ie46a2b197f4d2037cf3eed194764ce9eb5670415 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - NSB Prox vPE Test JIRA: YARDSTICK-802 Addition of Prox vPE test case - The tests supports BM, Openstack Heat - Supports 4 ports - Grafana dashboards included - Added support for parameters.lua for prox additional files - Unit tests for code coverage Change-Id: I5cccb351dacba88a293ae4b8aba1f0a803d62e6d Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - KVMFORNFV:Livemigration testcase changes in Yardstick This patch includes changing the function call to place the respective bash file to the given TARGET_SCRIPT path. Change-Id: Iba2adf4bdb6d9045493f5099e29ade4e8e6b5cd3 Signed-off-by: Navya <navyax.bathula@intel.com> - libyajl: install from pkg libyajl needed for ovs_events and ovs_stats, removed installing from src and rather installing as deb pkg Change-Id: Ic1ebf88304bbc7f4fa7b9b51c95f1e8e729e71e3 Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com>
2017-10-08Update git submodulesCristina Pauna1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Update load_images.sh to MCP@aarch64 The load_images.sh script still contained old functionality. The changes are: - don't use TestVM anymore, MCP does not load that by default like Fuel did upload the cirros image instead - don't upload the kernel separately for aarch64, one part image works now - add the needed extra-properties accordingly to each image The script was tested on arm, the test are running now without errors JIRA: ARMBAND-285 Change-Id: Iee8ce6cde43bebceb2edbb1310ea81c665876aff Signed-off-by: Cristina Pauna <cristina.pauna@enea.com> (cherry picked from commit af71c468fe83a5149e0e18cdb233e059302209e3)
2017-10-06Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - fix random test_task unittest fail due to os.environ mock sometime Jenkins fails due to what I guess are concurrency problems in os.environ mock ====================================================================== FAIL: tests.unit.benchmark.core.test_task.TaskTestCase.test_parse_suite_with_constraint_no_args tags: worker-10 ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/python3.5/unittest/mock.py", line 1157, in patched return func(*args, **keywargs) File "/home/jenkins/opnfv/slave_root/workspace/yardstick-verify-euphrates/tests/unit/benchmark/core/test_task.py", line 208, in test_parse_suite_with_constraint_no_args task_files, task_args, task_args_fnames = t.parse_suite() File "/home/jenkins/opnfv/slave_root/workspace/yardstick-verify-euphrates/yardstick/benchmark/core/task.py", line 455, in parse_suite cur_pod = os.environ.get('NODE_NAME', None) File "/usr/lib/python3.5/unittest/mock.py", line 917, in __call__ return _mock_self._mock_call(*args, **kwargs) File "/usr/lib/python3.5/unittest/mock.py", line 976, in _mock_call result = next(effect) StopIteration Ran 1262 tests in 2.375s FAILED (id=0, failures=1) error: testr failed (1) + testr failing Replace the mock decorator with a context manager to try to reduce the scope and duration of the mock. Change-Id: I342fe6c403e66c53ac4c39fd88fa9047cdfae5d9 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit 2fadf7aec9e2761c39d29d8af1ee7d69d154652d)
2017-10-06Update git submodulesMaciej Skrocki1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Fixed compilation of latest samplevnf added download_civetweb and install_civetweb roles. Change-Id: Id4f60cc07b3befc7edb3cfc38773fe1a73a44c1f Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - add wait_for_instantiate Change-Id: Idc54fc907dba4603984712fc43a0db8dfd4b7374 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - heat: add port name as port Change-Id: Ibd159359c6f57d573a909d6841c121c15bf692c1 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Making sure yardstick container uses hosts timezone This is required for influxdb results being reported "in the future" when the timezones do not match. Change-Id: Ic41e19d26c46b6ccfa6dacddb595236af19e437a Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - rewrite _generate_pod_yaml to combine name and pkey setting just deepcopy and change. This will probably break in the future if we use anything other than dicts and list. Change-Id: I9a9b0c5b09b3e3ebd7ed593bf6339ea030605f93 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Disable VNF deploy by default Change-Id: I27bcc41c855f34fb1fd0332fc24e7bf0b2af4ec2 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - NSB Prox minor refactor of BNG JIRA: YARDSTICK-802 - Updated the BNG code with minor refactor. - Corrected the CPE core name - Update binsearch traffic profile with 64B Change-Id: Iae0be766edb986520045655fa567651711813a8b Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> - Add intermediate variables for attacker,monitor,result_checker JIRA: YARDSTICK-790 Change-Id: I6bb36c98b8673155d3142fc54cfb39315d5ce613 Signed-off-by: qiujuan <juan_qiu@tongji.edu.cn> - Added example TC with collectd on compute node To be used with yardstick/etc/yardstick/nodes/pod.yaml.collectd.sample Change-Id: I6eff4f6adf57596e06c685ab87b83699696ad7b6 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - Adding sample testcases to run on standalone context - vFW - vCGNAPT - vACL - UDP Replay - vPE (Only OVS supported) Change-Id: Idbc4d1d6bc1283e40d2fcb9457a871a9198ad147 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Adding auto generate scale-out support for correlated traffic Change-Id: I2755b596068545c1a3a672ceff47d814a44ae050 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Adding 2 node ixia generic scale-out test case generation Change-Id: I7da2d5bcd7c58c669e28a7271e4c6848c003e84a Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Adding scale out templates for ovs_dpdk/sriov using 2 node setup 2 - node setup: - Traffic generator starts new stream on both uplink and downlink This patch addes amsible scripts to enable scale_out testcases - vfw Change-Id: I0340636bce3e74cd6175f728b9e7e014a4eb2fd5 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-10-04Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - NSB PROX test hang fixes The PROX tests were hanging in the duration runner. These are fixes for various errors: raise error in collect_kpi if VNF is down move prox dpdk_rebind after collectd stop fix dpdk nicbind rebind to group by drivers prox: raise error in collect_kpi if the VNF is down prox: add VNF_TYPE for consistency sample_vnf: debug and fix kill_vnf pkill is not matching some executable names, add some debug process dumps and try switching back to killall until we can find the issue sample_vnf: add default timeout, so we can override default 3600 SSH timeout collect_kpi is the point at which we check the VNFs and TGs for failures or exits queues are the problem make sure we aren't silently blocking on non-empty queues by canceling join thread in subprocess fixup duration runner to close queues and other attempt to stop duration runner from hanging VnfdHelper: memoize port_num resource: fail if ssh can't connect at the end of 3600 second test our ssh connection is dead, so we can't actually stop collectd unless we reconnect fix stop() logic to ignore ssh errors Change-Id: I6c8e682a80cb9d00362e2fef4a46df080f304e55 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03Update git submodulesMaciej Skrocki1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Switched nsb_setup to pull stable yardstick docker image Change-Id: I4474ee65899d5f60e657835e8d80de0d372abd22 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com>
2017-10-03Update git submodulesDeepak S1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Enable multi-port perf in trex as TG set TRex -c option for threads per port based on hardware number of queues. We can't auto-detect number of queues and we can't use more than one thread per core on systems with single-queue interfaces, so move the option to the config file options: tg_0: queues_per_port: 2 also enable trex debug by removing >/dev/null redirection options: tg_0: trex_server_debug: true Change-Id: I46da187849282bf28f4ef5b333e1ae890e202768 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - runners: add timeout to queue put we don't want to block the test waiting to put KPIs Add moderate timeout. In case we do timeout, it doesn't matter if we drop intermitten KPIs Change-Id: I049c785355993e6b286748a5c897d54dd2923dc9 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - add collectd resource node capability allow manually adding collectd nodes using Node context. if a node is present with a collectd config dict then we can create a ResourceProfile object for it and connect to collectd. example nodes: - name: compute_0 role: Compute ip: 1.1.1.1 user: root password: r00t collectd: interval: 5 plugins: ovs_stats: {} Change-Id: Ie0c00fdb58373206071daa1fb13faf175c4313e0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Optimize Core usage for the sampleVNFs Change-Id: I80aa7e796b9ca4c4881c78310860e293a4a75560 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Prox L3FWD 2-port test fix JIRA: YARDSTICK-802 Updated the handle config for l3fwd 2 port test The tx and rx descripters is removed as they were not there in original DATS config. The BM test was dropping packets beacuse of this. Change-Id: I40d113267cbb3376a772b5a5aaecf74bea9d06fb Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> - drain runner queue and undo cancel_join_thread Sometimes the runners can hang. Initially debugging lead to the queue join thread, so I thought we could cancel all the join threads and everything would be okay. But it turns out canceling the queue join threads can lead to corruption of the queues, so when we go to drain the queues the task hangs. But it also turns out that we were not properly draining the queues in the task process. We were waiting for all the runners to exit, then draining the queues. This is bad and will cause the queues to fill up and hang and/or drop data or corrupt the queues. The proper fix seems to be to draining the queues in a loop before calling join with a timeout. Also modified the queue drain loops to no block on queue.get() Revert "cancel all queue join threads" This reverts commit 75c0e3a54b8f6e8fd77c7d9d95decab830159929. Revert "duration runner: add teardown and cancel all queue join threads" This reverts commit 7eb6abb6931b24e085b139cc3500f4497cdde57d. Change-Id: Ic4f8e814cf23615621c1250535967716b425ac18 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - exec_tests: remove releng clone code we bind-mount the credentials into the container so we don't need to clone releng Change-Id: I838745a1470015a693f1801c93b930e8df06ef4b Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Ensure that at least one handler is available https://jira.opnfv.org/browse/YARDSTICK-773?filter=-3 Remove dependency of yardstick on utils methods Change-Id: Iadf502364a7f08c279a8f0d17d7e45e8047f4066 Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> - ansible: add grub.cfg hugepages regexp replace when building the image in chroot we can't run update-grub of grub-mkconfig because both commands probe for root partitions, which doesn't work in the chroot. Instead we manually regexp replace the kernel boot line in /boot/**/grub*.cfg Change-Id: I31fac2a3db4d1d044f11357b1715119066509676 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - code inspection fixes: test_pktgen Change-Id: I05cb069984b7674924cfcb1ed023048c0aa0c444 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Adding example testcase to enable multiport support for http Change-Id: I780aa3ea6b04df08baffb5ee5beff66bdc37f37e Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Fix src/dst ip update in ixia configuration Change-Id: I03976c182e164a512a5ef48ad20928f27451c3f6 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Enabling multi_VM & multi port launch in standalone context new context names: - SRIOV - StandaloneSriov - OvsDpdk - StandaloneOvsDpdk - Seperate helper, libvirt, server info class - Allow multi-port and multi-VM support. Change-Id: I3c65e4535082fa0e2f4c6ee11c3bca9ccfdc01b8 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Martin Banszel <martinx.banszel@intel.com> - Grafana Dashboard update for Prox Tests JIRA: YARDSTICK-802 Updated the Grafana dashboards to collect KPI's correctly & incorporate scale up changes in topology Influx-db stores the KPI’s fields as: <TG><Port><kpi> TG has changed from : tg__1 to tg__0 VNF has changed from : vnf__1 to vnf__0 Change-Id: I3bd8be61210906bc4de95c9b1986033572d93277 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-10-02Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "load_images.sh: Add missing ssh_options" into stable/euphrates - load_images.sh: Add missing ssh_options Empty ssh_options led to ssh login failure, which stopped the whole script. Change-Id: I8374a30a02b14d04eb0f623a0c58d7ebed77a589 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com> (cherry picked from commit 77c7d358bc6a61e2a5c24c6056cc3e40561f27c7)
2017-10-02Update git submodulesrexlee87761-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - CI: add new test cases into CI so they can have result Change-Id: Ib2b165c41121b29b2af378dc420c2360786de3f0 Signed-off-by: rexlee8776 <limingjiang@huawei.com> (cherry picked from commit 4aecf8839e12260284603266c4b93dc72b33ea36)
2017-10-01Update git submodulesDeepak S1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Auto create ixia config based on the traffic profile Change-Id: I031cc7f24f0c0816eb577a4d1606a714f68a5f83 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - replace ansible modules Change-Id: Ia7c1ce781075142910a6c618a9a23f34a710dfe9 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Adapt getting the image architecture to mcp The part which gets the image architecture still uses the old fuel command. Adapted the script to use the mcp command. JIRA: ARMBAND-285 Change-Id: Iddce77c3a856ea11f9994861151db89a402e735e Signed-off-by: Cristina Pauna <cristina.pauna@enea.com> - dpdk: pciutils and lspci is required for dpdk-devbind.py Change-Id: I8529f33d849fc659b557e1d19761c0765ebda57e Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Adjusted IPs in some prox tests. Change-Id: Iff39fa5b90d1ae5534ce1fff31dfb84c1e47340c Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - Switched to stable/euphrates for samplevnfs projext Change-Id: I0305c263740c25bdfa3bb2667838ca2b75d33ba0 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - add collectd ansible required DPDK fixes to enable building collectd with dpdkstats need /usr/lib/dpdk-pmd symlinks Compiling all this code requies more space than the default ubuntu cloud-image, so we need to resize the cloud image somehow Change-Id: Ib39fc94ba8101ca1aebc7d2a710be88b0338f7c3 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - Added hw_vif_multiqueue_enabled metadata to the added samplevnfs image in OpenStack. Change-Id: Iad1dce6b0d0a1c010aa62f2fdf54c5d0560ed0c7 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - vnf_generic: Fix str object has no attribute items When an IP range is specified in src_ip/dst_ip like: src_ip: - '152.16.100.180-152.16.100.181' yardstick would return str object has no attribute items error. This change will return the IP range as is if type is str. Change-Id: I3b097777f0d85b0600207157bebba18987ea2275 Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - NSB: ignore VNF node if there is no VNF model Change-Id: I571289c744441a6114c6d45ac6cbd7cfc0dafef2 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - collectd: add config file templates as package_data needed for pkg_resources.resource_string Change-Id: Ief7a8fcd88fd6d371851a26e1559351963979e68 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-01Update git submodulesAbhijit Sinha1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Addition of Prox NSB BNG and BNG-QoS test JIRA: YARDSTICK-802 Added Prox BNG and BNG-QoS Test - The tests supports BM, Openstack Heat - Supports 4 ports - Test added for BNG traffic profile - Fixed the Prox heat test cases with proper upstream and downstream links - Grafana Dashboard for BNG & BNG-QoS added - Increased the test Duration to 300 TODO: - Test does not Terminate correctly Update: Added new helper class for run_test: Genric, MPLS and BNG tests. Change-Id: Ib40811bedb45a3c3030643943f32679a4044e076 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> - Terminate the run traffic if initiated after traffic is closed Change-Id: I89fc4bccb5b5a0d49d804fca72b59e53ff77a805 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - collectd: write config file from Jinja2 template We have the collectd.conf inside the python package so instead of copying it from various places, write the template directly to the remote system. collectd: read collect.conf template with pkgresources read the collectd.conf file as a string directly and upload without creating temp file use Jinja2 template, disable failing plugins use proper Jinja2 template, disable the plugins that were failing to load and blocking startup add support for per-testcase collectd.conf config using YAML add support for custom interval, default is 25 seconds Change-Id: Id904f7b7c9f41a9dd7adf5dfa06c064d65c25d2d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Adding multi-port support for ixia taffic generator Change-Id: Ic8aa130f3cdc7bd8dec39d06a6b824340bf658b2 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - bugfix: tc055 fail due to options with no value JIRA: YARDSTICK-816 Change-Id: Ib7eb411b940775915c6c9f87ac5cdc9825069467 Signed-off-by: rexlee8776 <limingjiang@huawei.com> - Fix vPE VNF characterization issues. Change-Id: Ia934128777d2839f6d2b940857c266fc3e2bd4a1 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - [PATCH] Patch for Yardstick arm64 netperf_install.bash Change-Id: Ic384c4603e7482f150fd4c4d2d6a6448a45ddb9e Signed-off-by: Trevor Tao <trevor.tao@arm.com> - Add nodeSelector to enable selecting the desired Kubernetes running node when creating containers for Kubernetes context For example, a yaml file may looks like: servers: host: image: xxx command: /bin/bash nodeSelector: xxx: yyy Synchronously change the unit test for this function Change-Id: If74c9dad9b1a70395bb79f34708a0fde04e7e650 Signed-off-by: Trevor Tao <trevor.tao@arm.com> - Enable IP_ROUTING for netperf UDP_STREAM test To avoid the following ERROR when netperf test between 2 different subnets: ERROR netperf: send_omni: send_data failed: Network is unreachable For detail, please see: https://serverfault.com/questions/802320/netperf-iptables-\ masquerade-network-unreachable Or: https://stackoverflow.com/questions/11981480/error-in-running-\ netperf-udp-stream-over-openvpn Change-Id: I62b202844861440deaf3bf0f65b41561bd87ae87 Signed-off-by: Trevor Tao <trevor.tao@arm.com> - Read user & password from yardstick.conf in Grafana configuration JIRA: YARDSTICK-812 Currently grafana data source configuration is hardcoding . It is a risk. so I read it from yardstick.conf. Change-Id: I8a9c8afbce6c4534fc43a0bfb5c56d67a8b59db0 Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
2017-09-30Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Merge "Get node IPs and IDs according to env" into stable/euphrates - Get node IPs and IDs according to env Extract node IPs and IDs for each node having a controller or compute role (name starting with the "cmp" or "ctl" prefix) and add them into the $pod_yaml file, analogous to the previous implementation. Since node IDs are expected to be unique and integers (condition that does not match the salt node ID format), they are substituted with an incremented index for each controller/compute node in the environment. Change-Id: Id90626edc3f098bd96343336b2be179721dee5a1 Signed-off-by: Catalina Focsa <catalina.focsa@enea.com> (cherry picked from commit 6892687967d2d5ac8db37dd67b3e52d9f775eda6)
2017-09-30Update git submodulesrexlee87761-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - bugfix: tc054 default value is wrong management route ip is not common in most SUTs, so it should be removed. also huawei pod1 ipmi info should updated so this test case can be added into ci later Change-Id: I3a29c59c473ee7087d4d61753ffc955b061571fb Signed-off-by: rexlee8776 <limingjiang@huawei.com> (cherry picked from commit 8701e63e3daf508d8e3482f0a344554d17ff6e24)
2017-09-30Update git submoduleschenjiankun1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Remove checkno.png and checkyes.png due to license issue JIRA: YARDSTICK-817 Since checkno.png and checkyes.png is not Apache-2 license based. so we need to remove them. Change-Id: I40dd303fb54a3736ca969ac1c186d2cd23408436 Signed-off-by: chenjiankun <chenjiankun1@huawei.com> (cherry picked from commit da0163b7b7aaf3ede4e757a0b7d94a5ea99b1083)
2017-09-28Update git submoduleschenjiankun1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Create test suite for Euphrates release JIRA: YARDSTICK-814 Test suite: "opnfv_os-odl-fdio-ha_daily.yaml", "opnfv_os-odl-dvr-noha_daily.yaml", "opnfv_os-odl-sfc-noha_daily.yaml" are missing in yardstick-apex-baremetal-daily-euphrates job. We need to create them. Change-Id: I6d8bbeb17cd887776f1f3b401ec80523ea90d3c1 Signed-off-by: chenjiankun <chenjiankun1@huawei.com> (cherry picked from commit 6ecb9a6d50345277645633b1bed4d255dc434222)
2017-09-28Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - task: fixup s/exe_info/exc_info JIRA: YARDSTICK-785 Change-Id: Ib37498e8df6a520f1d03256b73346fcedab3a177 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit 9ea225f671b774c6e373dbaab146d68cac16194e)
2017-09-25Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - tg_rfc2544_ixia: log exceptions and fix list iter Change-Id: Ia9722604b7c8ae23e784e780f113d012de544d4b Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Add service in kubernetes context JIRA: YARDSTICK-803 Currently kubernetes test case can only run in master node. We need to support it run in jump server. So I add service and use nodePort type. Then we can login the pod using nodePort. Change-Id: Ia7900d263f1c5323f132435addec27ad10547ef9 Signed-off-by: chenjiankun <chenjiankun1@huawei.com> - bugfix: tc025 should use ipmi to poweroff if it use shutdown, it'll take several minutes to shutdown, leads to the ipmi power on command fails Change-Id: I74b61325cbcc3a6ec070d2fa103accf84f29b0fa Signed-off-by: root <limingjiang@huawei.com> - Introduced timeout to post method of HttpClient We seen cases where grafana container bring-up code would fail, because of too quick access to the http api. Added 10sec timeout for the first query of the API. Change-Id: Ifc95a626d0ab5552a1f26fb167fc3f65791392d7 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - tg_rfc2544_ixia: use traffic id from JSON to update mac we were using raw sort index of the interfaces to set the MAC address, but we should be using the traffic id from the static JSON instead. Change-Id: I13284db04abb3eaf8c9826974a9e5aa1c37b3891 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Bumped samplevnfs flavor disk size to 6G. Since we increased the images size the 4G is not sufficient anymore. Change-Id: Iae25cf4cfb7a6cc69c8d28771c183a2342ac38d0 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - ixia: renamed execute to execute_traffic ixia: pass ports to generate_samples Change-Id: I90d12fa2ce8cd4d1c2a18bdcf70027f6d9e3f77f Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - nsb_setup.sh: update to Ansible 2.3.2 Change-Id: I2f700fbb169d02d126fe7ea22721bebf127c1206 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - cgnapt: mock time.sleep in unitests Change-Id: I26957977e6dcd0392078a543a6907a550711c702 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - requirements: bump Ansible version to 2.3 Change-Id: Ib429ba24d2b7287b6ec4e749386da0e1242d6a20 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Tweaked nsb_setup to always re-download latest container and re-create the container. Change-Id: I21204ddf97e2cccc2d5a762f5d910068bda1a948 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - prox: fix TG KPIs The problem is that we share the same ProxResourceHelper for both VNF and TG. For VNF we want to talk to resource.py and get collectd KPIs. For TG we need to read from the queue the TG calculated KPIs and we also want collectd KPIs. workaround is to use a different method name collect_collectd_kpi for VNFs Change-Id: Icc2132758e37ce210f5600a0cd433077930208e5 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Addition of PROX NSB tests to yardstick JIRA: YARDSTICK-802 Addition of PROX L2FWD_Multiflow, ACL, Load Balancing plus grafana dashboards Supports 2 and 4 port Baremetal & Heat Change-Id: I1f3990d5451de265ee3901302569c355ece3b146 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> - prox: use find_relative_file when uploading the prox files were being found correctly. if we use find_relative_file they will lookup relative to the task_path Change-Id: Ifde5d07df5ccfbfeba015b2f43bd8b53e89a00b7 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - add opnfv_os-odl-fdio-dvr-ha_daily.yaml scenario Change-Id: I723477edf810a220816a2e67aa80f7f144efb3a6 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - prox: pass prox_config_dict between Processes using queue we generate the prox_config_dict in the _run Process, but we also need it in the _traffic_runner Process to get core info. use a queue to pass the config list between the processes enable collect_kpi Change-Id: Ibaf41d606e559a87addf43d6ddaed206dbd2d20c Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> - Fixed few gaps when running on a minimal version of system - we need to make sure we have lsof installed - we need to update cache inside the image, because we are unable to install some of them Change-Id: Ic555489779e9096540001cb9c62ea2ab25c1ae90 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> - prox testcases: private -> uplink,public -> downlink, vnf_0, tg_0 Change-Id: I85afff4582bf538fcd0be5b4db1405a4da2573f9 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - UDP_Replay: enable collectd KPIs Change-Id: I92146411707a9ec29864d164dbd63b96d05bffe0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Heat: use pkey from string instead of key_filename Instead of using a key_filename for Heat, we can read the key as a string directly using pkg_resources.resource_string() This will enable us to save Heat stacks as pod.yaml, because we can embedded the key into the pod.yaml directly. Change-Id: I16baaba17dab845ee0846f97678733bae33cb463 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-25Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'stable/euphrates' - Generate pod.yaml from current context We want to generate pod.yaml from Heat contexts so we can re-use the context without destroying it. But we don't have node role information and it doesn't make sense in this case, so make the role optional. Since we changed Heat to use pkey instead of key_filename, we can embed the pkey into the pod.yaml, but we have to make sure to convert the pkey to string, in case it is a RSAKey object Change-Id: Ibefcfbd8236e68013a704c39964cb870da825da8 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> - Add host&targer in scenario['options']['server_name'] support JIRA: YARDSTICK-810 Currently host, target is in scenario, but as a input, we prefer it in scenario['options']. So I add support for under scenario['options']['server_name'] If we write host in scenario['options']['server_name'], the host ip info will be written in context. Change-Id: I90df20467ef5da772d22e9f272a2cac250f822e0 Signed-off-by: chenjiankun <chenjiankun1@huawei.com> - Log each test case status in a task JIRA: YARDSTICK-785 Currently if one test case failed, we will log error. But if one case success, we do not have any tips. We need log success when one case success. Change-Id: I0f41ac55f2569f44b787133e3f2594a5c5547f4a Signed-off-by: chenjiankun <chenjiankun1@huawei.com> - ansible: resize VNF image When compiling Trex, DPDK, collectd and all the SampleVNFs we use more than the 2.2GB size of the original Ubuntu cloud image. Accordingly we need to resize the image. If we were not inside a docker container we would use virt-resize to automatically handle all the cases, but virt-resize launches qemu. Instead we can use qemu-img to add extra space, then luckily we can use parted to resize the partition and finally resize2fs to resize the filesystem. This limits us to only ext3/4 images, but if we need to we could add support for other filesystems by checking file system type. Change-Id: Iac84b8e6967af5be64c280a7b1eaaf09f5d6b3aa Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>