summaryrefslogtreecommitdiffstats
path: root/docs/submodules/vswitchperf
AgeCommit message (Collapse)AuthorFilesLines
2018-01-12Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - capture: Traffic capture examples Traffic can be captured also at DUT side. Two options are supported by vsperf: 1) Traffic is captured inside VM after it has been processed by vSwitch. This can be used for verification of vSwitch frame modification functionality, including HW offloading at ingress side. 2) Another NIC under the test (NIC2) is added into standard VSPERF DUT setup. Traffic is then forwarded from TGen through NIC and vSwitch to NIC2 and then over patch cable back to NIC2, the vSwitch, NIC and to the traffic generator. This setup supports also verification of HW offloading at egress side of NIC2 and thus it can be used for validation of smart NICS. Both options above are traffic generator agnostic if compared to direct support of traffic capture by traffic generator. This patch introduces example testcases for both options. Detailed documentation will be pushed as a standalone patch. JIRA: VSPERF-556 Change-Id: I23e12e45768ae4dbe9442f74d8391c3d5b2c7895 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2018-01-10Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - vswitch: Improve add_phy_port error messages In case that vSwitch can't add required number of physical ports, then error message should be printed. Previous implementation was not consistent. Thus error handling has been united across all vswitches and message explicitly states the cause of the failure. NOTE: A better solution would be a refactoring of all vSwitch classes to follow VPP port handling and to move port related structures and physical port check into parent vswitch class. JIRA: VSPERF-555 Change-Id: Id09a61432ea93e261f563254829348ac61f5dc8a Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Jose Lausuch <jalausuch@suse.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2018-01-04Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trafficgen: Postponed call of connect()" - trafficgen: Postponed call of connect() In order to support execution of SW traffic generator inside VM, we have to postpone the call of connect() method from traffic controller. Currently it is called during initialization phase, when VMs are not active and thus connect() would always fail. This patch moves the call of connect() inside configure() method, which is called later when VMs are up and running. This modification allows to configure VM to VM scenario, where 1st VM is running a loopback application and 2nd one executes one of supported SW traffic generators, i.e. T-Rex or MoonGen. Change-Id: Ifeb659aadaa2e1cd5975564965e1719c1e72a12e Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2018-01-04Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "documentation: Installation prerequisites" - documentation: Installation prerequisites Added a mention of the default Python3 location used by virtualenv creation script after Python3 enforcement patch(/usr/bin/python3). Also added a paragraph warning of held-back kernel package version and DNF/APT/YUM configuration preventing modification of kernel packages. JIRA: MSP-10754 Change-Id: I1ba630cf85af4d99cc2cbed40163a9137b95c390 Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Ian Stokes <ian.stokes@intel.com>
2017-12-22Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "Trex_2544_verification: Add verification functionality to Trex code" - Trex_2544_verification: Add verification functionality to Trex code - Adds T-Rex verification step as implemented by other trafficgens - Adds check in rfc2544 loop for if no packets are received to fail test immediately - Refactors the trial code to support the verification option - Adds trial_run function - Removed unused line speed configuration setting JIRA: VSPERF-553 Change-Id: Ie324fe8fb6bf79fe0dc337b91af2bf83e901a8ab Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-12-19Update git submodulesJose Lausuch1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Add support for SLES 15 Change-Id: I555fea7514475153ae74b6f3d2ab2df1c30bb1aa Signed-off-by: Jose Lausuch <jalausuch@suse.com>
2017-12-14Update git submodulesChristian Trautman1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - rhel_path_fix: Fix pathing issue introduce by other commit Fixes pathing issue with virtual environment creation caused by commit 21b23522861e364daf150cd997c5d60851847ef2 Change-Id: Ia2c0c44da898e40e122571e477301343d047f974 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-12-14Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "teststeps: Improvements of step driven TC" - teststeps: Improvements of step driven TC This patch adds support of access to VMs deployed automatically by deployment scenario (e.g. pvp, pvvp4, etc.). It also modifies filter for checking output of executed commands to correctly handle different end of line encodings (i.e. \n vs. \n\r). JIRA: VSPERF-539 Change-Id: Ifc796d992b90e316bad5853aaefce79e439e294d Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-12-14Update git submodulesJose Lausuch1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Add support for openSuse Tumbleweed This patch aims at adding support for Tumbleweed, which is a rolling release. That means that the VERSION_ID is not fixed and can't be mapped to a directory e.g - VERSION_ID="20171120" - VERSION_ID="20171121" Change-Id: I99c9a4f1042c22b73879e954147c54c87b6a8b21 Signed-off-by: Jose Lausuch <jalausuch@suse.com>
2017-12-13Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trex_learning: Add learning packet option to T-Rex testing" - trex_learning: Add learning packet option to T-Rex testing Adds packet learning option which is available on other Traffic generators as a feature. This adds this feature to the Trex implementation inside of VSPerf. JIRA: VSPERF-547 Change-Id: Iaf4d0721b22eb780c25e29295c112d4fcb47b22c Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-12-12Update git submodulesRichard Elias1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - install: Python virtualenv python3 enforcement It was reported that virtualenv-3.x sometimes uses python2.7 instead of python3. This update of the python virtual environment creation scripts, enforces the use of python3 from /usr/bin/python3. The scripts were tested on fresh installations of each currently supported Linux OS. JIRA:VSPERF-551 Change-Id: If909dd9578a3c42b14c1a3e4f9ed7b07a675fb58 Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-12-01Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - tools: Update versions of tools Default versions of DPDK, OVS, VPP and QEMU have been updated. VPP socket file configuration is mandatory for VPP 17.10. Change-Id: I3465161ae9ba9b50dfd90bb19d84f128c72d44ea Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-11-28Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - ovs_vanilla: Fix vswitch shutdown process Datapath must be removed before vswitch termination. JIRA: VSPERF-548 Change-Id: I7408ddc1b21e2bc02a44785dca07d9c026bc28c1 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-22Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trex_stat_packet_counts: Add packet counts to trex reporting" - trex_stat_packet_counts: Add packet counts to trex reporting Adds packet count totals for transmit and receive to reporting at the end of test execution. JIRA: VSPERF-546 Change-Id: I51027fae109d0ea794c0db03f5781ddb2fcbb941 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-11-21Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "sriov: Determine path to the bind-tool" - sriov: Determine path to the bind-tool In case of SRIOV path to the bind-tool must be known before NIC driver is re-initialized. It means before TestCase.__init__() is called. Change-Id: Ib6fdba233e665144510dd492462c0a21aa19ed71 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-21Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "regression: OVS/DPDK regression tests" - regression: OVS/DPDK regression tests A set of regression tests for verification of OVS/DPDK features was introduced. Following features are tested: * DPDK NIC Support * DPDK Hotplug Support * RX Checksum Support * Flow Control Support * Multiqueue Support * Vhost User * Virtual Devices Support * NUMA Support * Jumbo Frame Support * Rate Limiting * Quality of Service JIRA: VSPERF-539 Change-Id: I6c83e9c38e29f197a5236ac68c88d7045fef775b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com> Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-21Update git submodulesRichard Elias1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - install: Fedora installation script update An update of the Fedora installation scripts for versions 24,25 and 26. Change-Id: Ib510d78f4040e1029bc68d2fa303a4c0a6357de3 Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-20Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - ci: Skip VPP tests if needed If VPP can't be executed properly, then VPP tests will be skipped for VERIFY and MERGE jobs. It sometimes happens, that VPP can't be executed at builders used for VERIFY & MERGE jobs execution. These failures are not caused by patches themselves, but they are blocking standard review & merge process. Thus VPP tests will be suppressed in case that VPP can't be started at all. This change is not related to DAILY job, which is executed at POD dedicated to VSPERF project. It means that VPP tests are always executed by DAILY job. Change-Id: I4752601561b94a82482c403305bc3f24779f538b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-20Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "paths: Modify algorithm for PATHS verification" - paths: Modify algorithm for PATHS verification VSPERF verifies if PATHS to the tools (vSwitch, VNF, etc.) are valid. This check was modified to take into the account tools required by selected testcase. It will help to avoid runtime errors triggered by missing tools, which are not essential for testcase execution. Change-Id: Ifcfea983cad1bdbc8c1f08c7a0281001005410df Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-15Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "teststeps: Improvements and bugfixing of teststeps" - teststeps: Improvements and bugfixing of teststeps This patch introduces several improvements and small bugfixes of teststeps. These changes were identified during implementation of OVS/DPDK regression tests. Patch content: * teststeps: step aliases were implemented * teststeps: improved filtering by regex for any step, which returns string or list of stings; filter will process all lines * teststeps: support for log object * teststeps: support for trafficgen get_results call * teststeps: configurable suppression of step validation * trafficgen: remove old results before traffic is executed * trafficgen: support for flow control on/off (IxNet) * trafficgen: support for configurable learning frames (IxNet) * trafficgen: support for runtime changes of TRAFFICGEN_PKT_SIZES, _DURATION and _LOSSRATE * vnf: flush pexpect output of previous commands * vnf: use execute_and_wait() to ensure correct cmds order * vnf: dpdk vHost User interface name set according to its type, e.g. dpdkvhostuserclient * vswitch: support for OVS restart * decap: simplify configuration of tunneling decapsulation tests * settings: values of all configuration options are restored after TC execution * modified formatting of test description used by --list * testcase name and description is logged before its execution * small bugfixes JIRA: VSPERF-539 Change-Id: I550ba0d897ece89abd3f33d6d66f545c4d863e7b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-15Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - vpp: Define vppctl socket name Newer versions of VPP require an explicit definition of CLI socket file for proper functionality. Otherwise vppctl is not able to connect to running vpp process and thus vsperf is not able to configure and control vpp. Change-Id: Id0df75fd0894e22b1b4d7fa05e16f49efe20d3ab Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-07Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "load_gen: Supporting loading of load_gen via loader." - load_gen: Supporting loading of load_gen via loader. Currently all tools are loaded via loader utility, except load_gen. Load_gens were loaded directly through component_factory. This patch adds support to load load_gens through loader utility. The changes are as follows: 1. Configuration changes:The common.conf include configuration of directory. testcases.conf includes changes to load configuration, where tool is no more part of the load-configuration. The custom.conf has configuration of LOADGEN to be used - this configuration replaces the earlier 'tool' configuration parameter. 2. loader_utility_changes: In loader.py, loadgen_loader is defined, which is used in new get_loadgen function. 3. component_factory changes: in create_loadgen, similar to other tools, the function just retuns the object of loadgen_class. 4. Renaming of Dummy load_gen: Loader fails to load properly a dummy loadgen due to name-clash with dummy in pkt_gen. To avoid this name clash dummy is renamed to dummyloadgen. 5. testcase changes: create_loadgen is now called with output of loader's get_loadgen_class. 6. Fixed Pylint Errors and extra-space at the end. 7. Included CLI options support for --loadgen and --list-loadgens. Thanks to Martin K. 8. Added the missing loadgen parameter in testcases.conf. 9. Fixed the missing comma error. 10. Added CI change in build-vsperf.sh 11. Fixed configuration reading in stress/stress.py JIRA: VSPERF-533 Change-Id: I3fbb259618825a12fef55320a748a4f02509190b Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-11-07Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - vpp: Multiqueue support for VPP VPP class was updated to configure RX queues of VPP interfaces based on VSWITCH_DPDK_MULTI_QUEUES value. Change-Id: I855dbaef86cf935b2639976e8b1757eb1af4e9ac Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-10-30Update git submodulesSridhar K. N. Rao1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - INFO: Update PTL https://lists.opnfv.org/pipermail/opnfv-tech-discuss/2017-October/018501.html Change-Id: I9305ec2e13e19b32e142640dab63487bab9a2b6a Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2017-10-20Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trex_multistream: Add multistream support to T-Rex" - trex_multistream: Add multistream support to T-Rex Adds incremental source multi-stream functionality to T-Rex traffic generator code in VSPerf. JIRA: VSPERF-532 Change-Id: Ib5ba326699d89350ac1715c9a4276e5fa46a133e Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-10-19Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - conf: Fix default VPP configuration Number of VPP workers (aka PMD threads) was not specified explicitly in default configuration file. Configuration has been fixed to use the same cores as OVS with DPDK. Change-Id: Icd3e5d6f429435fbc1ff580891f4b182d1c48729 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-10-05Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "doc_review: Review docs for accuracy and grammar" - doc_review: Review docs for accuracy and grammar Fix issues with grammar and accuracy. JIRA: VSPERF-536 Change-Id: Ia703d306bb7a14b11e09ab4077b8adfa5fb5e6af Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-10-03Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "Removed drafts of test specificaiton now published as RFC8204. Also removed IETF license notice and added a file with link to RFC8204" - Removed drafts of test specificaiton now published as RFC8204. Also removed IETF license notice and added a file with link to RFC8204 Change-Id: I44b4cb75afeff74a58f402a7cb8816ddfbe52b87 Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
2017-10-03Update git submodulesTrevor Cooper1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Updated project description to clarify VSPERF independence from Open Stack Change-Id: Iab653c7ad1cf6cbdb9c15056337a2768a489a87a Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
2017-09-27Update git submodulesChristian Trautman1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - trex_prom: Add promiscuous option for trex for SRIOV tests Adds option to enable promiscuous mode for Trex traffic generator to allow for SR-IOV tests to work correctly. Trex by default only accepts packets based on destination MAC address matching what is configured on server in /etc/trex-cfg.yaml. This removes that limitation since SR-IOV tests require mac addresses to be modified in the generated packets to correctly route packets to the relevant VFs. JIRA: VSPERF-531 Change-Id: I19b64f364c8a1b656994c82c96f47a68b92486d8 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-09-21Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trex: RFC2544 Throughput bugfixing" - trex: RFC2544 Throughput bugfixing Changes introduced by patch: * Ensure that correct results with given lossreate are returned * Add threshold value to specify the accurancy of RFC2544 Throughput measurement. Default value is 0.05. JIRA: VSPERF-530 Change-Id: I8148deba9039c3a0feb6394d6671aa10c5afaf0a Signed-off-by: Martin Goldammer <martin.goldammer6@gmail.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-09-19Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - CI: Update hugepages configuration Changes introduced by this patch: * Configure more hugepages to be used during CI run. * Fix detection of correct ovs-vswitchd execution. * Skip VPP shutdown overhead in case that VPP execution has failed. Change-Id: Id1badd61334141dcc331691af4a1401a09d06807 Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-09-15Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trex: Enforce 10 iterations for RFC2544 tput" - trex: Enforce 10 iterations for RFC2544 tput This patch enforces 10 iterations during search for besti RFC2544 Throughput with 0% packet loss. Unless 0% packet loss is detected during first iteration with initial frame rate. JIRA: VSPERF-530 Change-Id: I99e49e9dbf4e1424253d0cfec804819516c00df8 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Martin Goldammer <martin.goldammer6@gmail.com>
2017-09-15Update git submodulesChristian Trautman1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Tuning_doc: Add tuning doc for installation of cpu-partitioning profile Add documentation for installing and configuring tuned-adm using the cpu-partitioning profile. Tested and verified by Martin and Christian. JIRA: VSPERF-514 Change-Id: I7ae25898abe0854c22ae16ee8d3d0a6001cda2f6 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-09-15Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "CI: Update hugepages configuration" - CI: Update hugepages configuration Use the number of free hugepages to correctly set hugepages configuration. Limit the number of allocated hugepages to avoid memory exhaustion. Change-Id: Id5239200579f8c43706ffcc769e4963280b9eb2b Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-09-15Update git submodulesTrevor Cooper1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Updated project description in user and developer guides. Updated info on RFC8204 in developer guide. Removed whitespaces causing rst validation failure. Change-Id: Ibdefee2d0fea03873bac8aba514b68de1f1e0dbe Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
2017-09-12Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "Added two extra packages" - Added two extra packages Change-Id: Ibd7f5506d5600d8921dec42f10960df06f0f5250 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-09-08Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trex: fix Trex makefile" - trex: fix Trex makefile Trex makefile was fix to checkout correct commit ID. Add trex repo folder to .gitignore file. JIRA: VSPERF-528 Change-Id: Icd0406eaf088b88c28d90cf8a7dd9e1fa53a6f3b Signed-off-by: Martin Goldammer <martin.goldammer6@gmail.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-09-08Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "doc: Include list of TCs in doc" - doc: Include list of TCs in doc List of vsperf "inbox" testcases was added into documentation. This patch also fixes: * a few SPHINX warnings and errors * empty userguide index JIRA: VSPERF-519 Change-Id: I417ed40130f0c7de4f76551f3f1cac0cb1e6da89 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-09-06Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "openSUSE support" - openSUSE support Modified support for Leap 42.2 so not to be prompted for y/n on update and installation of required packages. Added Leap 42.3 as supported OS. Upgraded documentation accordingly. Change-Id: I33f3046a5b33bc842534a16911423a2febaa9417 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-09-06Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - opnfvresultdb: Report failed TCs into result DB In following cases, TC will be reported as FAIL in result DB: * CSV file with VSPERF results is missing (e.g. execution of vSwitch, VNF or trafficgen has failed) * 0 RX FPS is detected for at least one packet size during RFC2544 Throughput test (e.g. vSwitch is not properly configured due insufficient hugepages size) JIRA: VSPERF-488 Change-Id: I453bbe32db87497644e1464e74ef597f0f0f323c Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Mars Toktonaliev <mars.toktonaliev@nokia.com> Reviewed-by: Morgan Richomme <morgan.richomme@orange.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-09-01Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "trex: Add support Trex traffic generator" - trex: Add support Trex traffic generator Topology are two physical servers, on first is trex and second is VSPERF. Trex is running in stateless mode this means that on server where is located trex repo is running trex binary file and VSPERF working with server via python API. JIRA: VSPERF-528 Change-Id: Id8819495325ebc13fdce365f4af0e040ce68cd0e Signed-off-by: Martin Goldammer <martin.goldammer6@gmail.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-31Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "docs: Update E release notes" - docs: Update E release notes Release notes were updated with VSPERF additions during Euphrates release timeframe. Change-Id: I87154036676450065906c6fd8bc6db4604c84260 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-30Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "opnfvresultdb: Add mapping for VPP TCs" - opnfvresultdb: Add mapping for VPP TCs Patch adds testcase mapping among native VSPERF VPP TCs and appropriate TC names defined in results DB. JIRA: VSPERF-488 Change-Id: I5c4a50587a354a741c738d255105726943a701f5 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Mars Toktonaliev <mars.toktonaliev@nokia.com> Reviewed-by: Morgan Richomme <morgan.richomme@orange.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-25Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - report: Update paths after doc reorganization Directory with report files was moved to different location. Thus CI build script must be updated too. Change-Id: Id5b4c8b2740c01c821c25f8bfdaeb25352410e76 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-25Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "build: Rename cloned repositories and remove cuse" - build: Rename cloned repositories and remove cuse VSPERF expects folders to be named a certain way, but this may not be the case if another repository is specified via the package-list.mk file. One example of this is the DPDK stable repo which gets cloned to the "dpdk-stable" directory unless otherwise specified. Thus Makefiles were updated to enforce expected folder names. Unused configuration related to vHostCuse support was removed. Change-Id: Ifa48898d51e96c72e7d740f43cb635d729b2a796 Signed-off-by: Cian Ferriter <cian.ferriter@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-25Update git submodulesCian Ferriter1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - gitignore: Ignore non vsperf files .gitignore was updated to ignore following files: * VPP project directory * l2fwd binary files * tags JIRA: VSPERF-529 Change-Id: Idc10eae7b14c72a863f3473e02cbdc7c47d31b41 Signed-off-by: Cian Ferriter <cian.ferriter@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-24Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "opnfvresultdb: Update data reported to result DB" - opnfvresultdb: Update data reported to result DB Data reported to result DB were updated to comply with recent API version and requirements. JIRA: VSPERF-488 Change-Id: I6ab02ea54d99099e88b0d5ab6e9745ee8297f544 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com> Signed-off-by: Morgan Richomme <morgan.richomme@orange.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-23Update git submodulesTrevor Cooper1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Moved devguide for consitency with docs dir structure for all testing projects Updated RFC description based on IETF approval of Internet Draft Change-Id: Ifd37da946866f350b8968bbbe8c5a3f5ce762cfa Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-18Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "driverctl: Add driverctl binding tool" - driverctl: Add driverctl binding tool Adds driverctl as a binding tool option for dpdk devices. JIRA ticket contains test results to verify it works when using dpdk-devbind or driverctl. JIRA: VSPERF-525 Change-Id: Ia7a6e43a4b6fb3ba21f5d87d601f4ea4b95b7dab Signed-off-by: Christian Trautman <ctrautma@redhat.com>