summaryrefslogtreecommitdiffstats
path: root/docs/submodules/samplevnf
AgeCommit message (Collapse)AuthorFilesLines
2018-11-02Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Updating release notes for Gambia... Change-Id: Ide712ee94254b506a0ad88c95a7e01b789f00e48 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-10-31Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Add Gambia release notes Change-Id: Ide712ee94254b506a0ad88c95a7e01b789f99d49 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-10-31Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for counting non dataplane related packets" - Add support for counting non dataplane related packets When performing some zero packet loss performance testing on dataplane, it is important (not) to count non dataplane packets. For instance, one might receive uexpected packets from a switch, or ARP packets. Or one might need to transmit ARP packets. Such packets should not be counted as dataplane packets as for thse packets there is no 1:1 mapping between transmitted packets and received packets. To support this, the counters reporting numbers of transmitted and received packets remain unchanged but two new counters have been added to PROX, counting respectively number of received and number of transmitted non-dataplane packets. On RX side, packets are counsidered as non-dataplane if being ARP or if they do not countain the proper signature On TX side, ARP packets are not considered as dataplane packets. This feature requires configuration of signature. "dp core stats" command has been added Change-Id: I98e113cd02f36d540383d343a433592867ad86a9 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-10-31Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fix potential crash when shuffling mbufs" - Fix potential crash when shuffling mbufs Change-Id: I70de6345afc6a696906f006c1b0f44540ae4ecec Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-10-31Update git submodulesXavier Simonart1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Support for DPDK 18.05 and DPDK 18.08 Improve DPDK 18.05 support introduced by 3e532aca. Support for DPDK 18.08. Change-Id: Ide712ee94254b506a0ad88c95a7e01b789f99d48 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-10-12Update git submodulesLuc Provoost1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - test improvements and fixes for image creation Updated and corrected the creation of an image containing the PROX tool with packer. Test will now only be declared successful when average and maximum latency are below a certain threshold. The start speed is now also a parameter of the *.test files. Change-Id: I1112555c87e7a857e1c699921ae08f61281642e1 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2018-09-20Update git submodulesAric Gardner1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Local Documentation Builds This adds configuration for performing local documentation builds with the following simple command: tox -e docs Change-Id: I84d69542d8c603e72d4af460834134d9711ac537 Signed-off-by: Aric Gardner <agardner@linuxfoundation.org>
2018-09-15Update git submodulesXavier Simonart1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Improve l3fwd performance JIRA: SAMPLEVNF-128 Improve performance of l3fwd use-case. L3fwd did not disable TX offload flags, which resulted in non-vector mode to be used in pmd in some cases like bare-metal. Note that in some cases such as virtio, vector mode was already used as OVS reports that it does not support TX-offload, hence TX-offload was already disabled on virtio. Using vector mode usually brings higher performance. Change-Id: I102b846d604a9cf28c6b7dae8bedbe918ccfcf6c Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-09-06Update git submodulesPatrice Buriez1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Workaround DPDK net/virtio queue setup issue JIRA: SAMPLEVNF-127 PROX was crashing in the VM with vector mode enabled and multiple OVS queues. This was not really a PROX bug, but a DPDK issue, which has been fixed by DPDK commit https://git.dpdk.org/dpdk/commit/?id=efc83a1e7fc3 This "net/virtio: fix queue setup consistency" is included in DPDK 17.11 and subsequent versions, and has been backported into: - DPDK 16.11.4: https://git.dpdk.org/dpdk-stable/commit/?h=16.11&id=516447a5056c - DPDK 17.08.1: https://git.dpdk.org/dpdk-stable/commit/?h=17.08&id=907fe4fc263e This means the fix is not included into any DPDK 17.02.x used by NSB. Fortunately, a simple workaround consists of calling rte_eth_tx_queue_setup() before rte_eth_rx_queue_setup(). This change implements this simple workaround, in order to make PROX work, even with unfixed DPDK versions. Change-Id: I818e9bb812babe023c6b7225c8b9769a359d9bec Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-08-13Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - update from src port in the pvt/pub handler Change-Id: Iccd72f6ab3db68bc093c42d60d225fe86f8fbda7 Signed-off-by: Deepak S <deepak.s@linux.intel.com> - Enable the local cache mac address Change-Id: If7d72f6ab3db68bc093c42d60d125fe86f8fbda7 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-07-27Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Initial support for DPDK 18.05" - Initial support for DPDK 18.05 This patch makes PROX compile with DPDK 18.05. However some features are disabled or will not work as expected such as: "mem info" command "police" mode Those will need to be fixed later (see DPDK1805 within code). Change-Id: Ie7d72f6ab3db68bc093c42d60d125fe86f8fbda7 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-07-27Update git submodulesPatrice Buriez1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Fix potential crash with latency accuracy Detect, remember and skip bad/unexpected packets: - too short to hold the latency-related values - with bad signature - with invalid generator_id using a uint64_t-based bitmap. Also moved variable declarations closer to usage, added some likely/unlikely hints, reworked some return statements, and fixed 32-bit overflow (every ~4s) of rx_time_err computation. Change-Id: Ib2aadc1af6b7a68601cc080ba66b10d41ff9a64e Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-06-29Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Updating release notes for OPNFV Fraser 6.2 Change-Id: I9a9da79cb4ccb245ddb38b50b561da51a40a359d Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-06-29Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "TempFix: vCGNAPT/vACL ipv4 perf issue" - TempFix: vCGNAPT/vACL ipv4 perf issue Change-Id: I924fcac7a65c0d221d5d422f419deb9c0f864172 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-06-29Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Temp Fix for vFW perf issue" - Temp Fix for vFW perf issue Change-Id: I324fcac7a65c0d221d5d422f419deb9c0f864172 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-06-17Update git submodulesLuc Provoost1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Adding centos.json to be used with packer to generate a VM with PROX Based on a CentOS cloud image downloadable from the web, you can now use packer to create an image that has DPDK and PROX installed in the proper directories. The VM is also tuned for guest VNFs. A service is also created to deal with the proper isolated_cpu settings for tuned. The service will also make sure uio and igb_uio are loaded. The prox_user_data.sh is not needed any more and hence deleted. ctrl-c of runrapid.py will now also stop prox in all the VMs so a new test can be started. Change-Id: I16cc59878e2d4912757f42e05f98d51dff5feb89 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2018-06-12Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Adding support for Ubuntu 17.10... Change-Id: I9a9da79cb4ccb245ccb38b50b561da51a40a359d Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-06-11Update git submodulesPatrice Buriez1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Get multiple port stats simultaneously JIRA: YARDSTICK-1220 Implemented new "multi port stats <port list>" command, which returns a semi-colon-separated list of comma-separated values: - port id - total (at last_tsc) for rx_pkts, tx_pkts, no_mbufs, ierrors + imissed - last_tsc Change-Id: I8a8da79cb4ccb245ccb38b50b561da51a40a359d Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-05-25Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Updating release notes for OPNFV Farser 6.1 Change-Id: I333fcac7a65c0d221d5d422f419deb9c0f864172 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-05-25Update git submodulesXavier Simonart1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Increase default mbuf size and code simplification/cleanup mbuf size was setup to achieve the best performance i.e. using the smallest mbuf and not segmenting packets. However this resulted in complex code, much dependent of the way the pmd are working e.g. a change(fix) in recent dpdk i40e implementation caused a 1782 (=1518+8+256) bytes mbuf to be too small to hold a 1518 bytes packets. Hence this change simplifies the mbuf size selection at the price of a potential decreases in performance - as more memory is now used. Except if jumbo frames are used, the mbuf size will now be the same for all modes. The packets will not be segmented except if jumbo frames are enabled. If jumbo frames are enabled, packets are by default segmented, except if the mbuf size is configured big enough in the config file. Change-Id: I222fcac7a65c0d221d5d422f419deb9c0f864172 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-05-18Update git submodulesIgor Shaula1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - fix code standard in VNFs/DPPD-PROX/handle_esp.c Change-Id: I6c1a8f6d8e3bc84f7eb8e5780cde98dd9c03c805 Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2018-04-26Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Update Fraser document..." - Update Fraser document... Change-Id: I4ed02be7ca899db4f8f97355c180a92d69d38d8f Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-04-26Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fix crc offloads." - Fix crc offloads. When configuring a port, prox configures queue flags. For historitical reasons, offloads had to be disabled on some pmds. There is now an API to query the ports and gets their capabilities. This fix sets now the flags based on the capabilities, and not the driver name. Change-Id: Ic72d15001992f26910f653c70d31e4381fff8089 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-26Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for multiple variables in core definition" - Add support for multiple variables in core definition In the [core] definition we were able to use one variable such as $core1 in [core $core1] but not [core ${core1}]. The second syntax is used when we want multiple variables such as in [core ${first_core}-${last_core}]. This second syntax is now supported. Change-Id: Ic94b84cb8cf827acb6697789cd180f41c3bdb028 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-26Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fix memory leak introduced by 4a65cd84" - Fix memory leak introduced by 4a65cd84 Change-Id: I937bb38baa51d1902793fa8720a3ea740a583473 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-26Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Support for dpdk-stable-17.11.1 crypto" - Support for dpdk-stable-17.11.1 crypto Change-Id: I1a4aee3d550d007046be9d1677dd0ad980cb9817 Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2018-04-26Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for generation of jumbo frames" - Add support for generation of jumbo frames Change-Id: I63af4e5c5c01a4412d517e33fc7111481fd0524a Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-26Update git submodulesXavier Simonart1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Support reading inline jumbo frame and dump them Add support for pkt_inline of jumbo frames. Dump the whole packet, and not a truncated packet. This might have a small impact on performance as the memory footprint is increased (by ~640K * number of tasks), resulting in potential higher DTLB misses. Change-Id: I4ed02be7ca899db4f8f97355c180a92d69d39d8f Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-20Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for reception of jumbo frames" - Add support for reception of jumbo frames Jumbo frames are now supported through the addition of a "mtu" parameter of the port in the config file. Setting the mtu to a value higher than 1500 bytes will enable the reception of jumbo frames. In addition, the rte_eth_dev_set_mtu is now set for all pmds. Finally, setting mbuf_size does not set MEMPOOL_F_NO_SPREAD anymore. This option was only used for pure debugging. Big packets can be received using two ways - Using multiple "small" mbufs, i.e. around 2K. This is the default. - Using one big mbuf holding the whole packet. This can be enabled by setting a parameter mbuf_size in the receiving core configuration Change-Id: Idd60ad31f41c89f9522dff4d894af2696b7a2ea1 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-20Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Support async operation in handle_esp" - Support async operation in handle_esp Change-Id: Ibee77e31c0eb7a0e14e7aa0df092a278dfe75d6b Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-20Update git submodulesXavier Simonart1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Fix link speed when link is down at startup. When link is down at startup, the link_speed returned by DPDK is 0. This results in un-optimized latency estimates in gen and lat. With this fix, lat and gen do nothing until link_speed is properly initialized, and use the right link speed in the fast path. Change-Id: Id2d14b6966ccfac7cc78db3c5a74e704b42edae7 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-06Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Added missing file: rapidVMs.vms" - Added missing file: rapidVMs.vms This file describes flavors, flavor meta data and boot info. All this info can be defined in the [Default] section and will then be used by to create all VMs. This data can also be specified in individual VM sections to overule the deault values per VM. Change-Id: I9d59208360eacec2790e5c467d7afcbeba301251 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2018-04-06Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for multiple GEN tasks running on the same core" - Add support for multiple GEN tasks running on the same core resolve memory allocation issue Change-Id: I90bbf711a6a7a4869e5024c061470d9779839a60 Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2018-04-06Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for crypto on multiple cores" - Add support for crypto on multiple cores * Experimental, for dpdk-stable-17.05.2 * New improved ESP decapsulation function Change-Id: If4862dacb3fcf53e21eb5932a195664f80c7c192 Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2018-04-03Update git submodulesIgor Shaula1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Support additional MAC format in config file Add support for space-divided bytes in MAC string. Support the same format as in "pkt inline". Change-Id: I7f2136c4424c45ce4abad4082470c9c9b1b3ab05 Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2018-03-28Update git submodulesLuc Provoost1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Replaced heat stack yaml files by individual server creation There is now a new file (rapidVMs.vms) describing how many VMs need to be created. You can specify the same flavor values in the [DEFAULT] section or specify specific flavors per VM. The heat stack yaml files are removed. Change-Id: Ic5ec485e8344a35e9ac9f6e8347adbc70520d10a Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2018-03-26Update git submodulesPatrice Buriez1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Trivial: fix trailing white-spaces Makefile checks for some coding style rules. Previous commit introduced trailing white-spaces, which broke compilation. Change-Id: Ia57fc9b1428b4a9f8537dce4875e62ac55265fe3 Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-03-16Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fix potential crash if link speed is null" - Fix potential crash if link speed is null Link_speed could be null when prox started with the ports down. This was potentially causing a crash. Another task will need to update link speed when the port come up. Failing to do this results in less accurate latencies (no extrapolation) Change-Id: I597b68e30117e6edb9ccb4732c2acedd5eb8ac80 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-03-16Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fix minimum latency" - Fix minimum latency Revert back part of commit 9fa316261d7d9 The function abs_diff was erroneously changed to diff_or_zero. This function was supposed to measure the difference between rx and tx time; when rx time overflowed and tx time not yet (i.e. rx time ~= 0 and tx_time ~=UINT32_MAX, this function added UINT32_MAX to rx_time. The name of the function was confusing and caused the previous commit. Net effect of previous commit was that every four seconds the minimum latency was 0 This commit reverse back to the original behavior, with a function name diff_time. Change-Id: Ia1b80e48a756cf5df411dcf58ca1cbc835214d13 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-03-16Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Adding Farser preliminary documentation Change-Id: I3bbd7897deb6e452068c07ef68d395affa4a4b50 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2018-02-22Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fixed the calculation of dropped packets and other changes" - Fixed the calculation of dropped packets and other changes * Calculation of aboslute and relative dropped packets was wrong and is now fixed. * ./createrapid.py has now an extra option to select custom availability zones for the different VMs. * Fixed a typo to create the flavor: hw:cpu_thread_policy * The generator config files have now the packet id & signature fields. See PROX for more details on this. * ./runrapid has now a new option --configonly. Default is False. If set to True, all configuration files will be copied to the VMS, but the tests are not started. This allows you to go to the VMs and manually start PROX. * In addition to the average latency, maximum latency is now also displayed. Change-Id: I3bbd7897deb6e452068c07ef68d3959ffa4a4b50 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2018-02-22Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for comments in configuration variables" - Add support for comments in configuration variables This feature will enable the possibility to have many cores configured in a prox config file, and enable/disable them through variables. For instance, a [core $var1] section in a config file will result in [core 1] if $var1 = 1; the whole section and section content will be ignored if $var1=# Before this implementation, [#core 1] or [core #] was already treated as a commented out section (the whole section was commented). But there was no way to define a variable $var = # to comment a section through a variable. Note that in today's implementation any non numerical (except s, h, t, -) characteter in the [core] section header (and not only #) will cause the section to be ignored. It would probably be better to consider # (as maybe N/A and none) as comments, and everything else as error. This is however not supported by the change request. Change-Id: Id4e2b27a1f9b6d595e0b442dcd971ad44a502031 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-02-22Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fix latency accuracy and dumping latencies to file" - Fix latency accuracy and dumping latencies to file - Also changed lat_info.tx_packet_index to uint64_t, so also did it for task_lat.prev_tx_packet_index and n_loss. - Adjusted format strings accordingly, and fixed some other formats. - Adjusted overflow increment to 2^32 (i.e. UINT32_MAX + 1). - Replaced hard-coded 64 with ACCURACY_BUFFER_SIZE (still hard-coded in handle_gen.c). Change-Id: Ia59f36e17c0797a2a958dbe3b2ac420263473524 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-02-15Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Auto Generated INFO.yaml file" - Auto Generated INFO.yaml file INFO.yaml meant to be machine readable. This file was auto generated from an ldap lookup and your projects INFO file. Meeting times are not currently filled out. please ammend this patchset to complete Going forward comitter promotions should be done against this file. PTLs: Must be merged for you to gain delete access on testresults.opnfv.org If project_lead: is missing (my script could not parse) please amend with same from commiters section eg: project_lead: &opnfv_$project_ptl name: 'Lead Name' email: 'lead email' id: 'lead lfid' company: 'lead company' Change-Id: Ib034d62db7138a9f7c66c4d3377d6681764c41b4 Signed-off-by: agardner <agardner@linuxfoundation.org>
2018-02-15Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fix potential crash in rx and tx distribution" - Fix potential crash in rx and tx distribution In some (rare) modes, more than 64 packets can be received through one rx function. This is for instance the case of the lat mode. Change-Id: Ie733c927a8e116c679c464f2551768185ef85366 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-02-12Update git submodulesLuc Provoost1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Zero packet loss testing has been added. Using l2 testing, where no ARP messages are being used, you can now run a zero packet loss test. The binary search will continue to find the speed where absolutely no packets have been lost during the test. On top of that, the output has been reformatted to also show the absolute and relative packet loss. The *.test files have now 2 new parameters: drop_rate_treshold and accuracy. When drop_rate_treshold is set to 0, this test will conclude successfull when no packet has been lost whatsoever. If this is set to any other number, the test will be successfull when the relative packet loss is lower than drop_rate_treshold. The new accuray parameter defines when the binary search will stop: when the relative difference between the min and max of the search window is lower than accuracy. The irq testing is slightly modified to print the total number of interrupts in a certain time bucket, not only as the number per second, but when there is no interrupt whatsowever, we print '0' in stead of '0.0' Change-Id: I8fafded0a225cbe1ba7ac61cd28e94d72099e4a0 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2018-02-04Update git submodulesLuc Provoost1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Fixed issues with the pkt_size command Fixed issues with pkt_size. For a 64 byte packet, we need to issue pkt_size <core> <task> 60 4 extra bytes will be calculated and added automatically by PROX Also added the missing irq.test and irq.cfg files Added support for OpenStack systems not using floating IP addresses Change-Id: I05d775eb858a58dd349ea370a0e34ac6448590c9 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2018-01-29Update git submodulesProvoost1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Rework of the test cases in the *.test files Cores can now be specified in the test files. An irq test has been added to verify if the VMs are not suffering from long interrupts. Change-Id: I647fda3ebf76c7c2b36a8df9a63d9fb83563c249 Signed-off-by: Provoost <luc.provoost@intel.com>
2018-01-25Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Fix dumping receive packets" - Fix dumping receive packets There were two issues identified in dump receive packets - when the receive packets was going to be dropped (and not transmitted), it was also printed as TX[255]. - a potential crash when using the dump function with modes like lat which can receive more than MAX_RING_BURST. Those issues have been fixed. Change-Id: Ia2297539d64961a211389d68e3c9c6280472243c Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-01-25Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Integrate irq mode into PROX (support display and command line)" - Integrate irq mode into PROX (support display and command line) irq mode can be used to show how a core is interrupted by other tasks. This mode does not handle packets. It only loops reading tsc. When the difference between two consecutive calls to rdtsc() is high then it means the core was interrupted. This task implementes the display, so that we can see a histogram of interrupts as well as the maximum, per core. Command line is also supported, through "show irq buckets" (too show the intervals of each buckets, in micrcoseconds), and the stats command line (showing the number of items in each buckets and the max).. Change-Id: I153cc3deaa7b86ae2776ea44e46ef9ecfd116992 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>