summaryrefslogtreecommitdiffstats
path: root/docs/submodules/releng-xci
AgeCommit message (Collapse)AuthorFilesLines
2018-02-21Update git submodulesDimitrios Markou1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Correct the BIFROST_IRONIC_VERSION variable By mistake the BIFROST_IRONIC_VERSION variable was written BIFROST_IRONIC_CLIENT_VERSION Change-Id: Ie35a4938a2fb38c633dd149c1d18f1da20a4e82a Signed-off-by: Dimitrios Markou <mardim@intracom-telecom.com>
2018-02-21Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: xci-deploy.sh: Calculate and print the total deployment time" - xci: xci-deploy.sh: Calculate and print the total deployment time It's useful to know how XCI performs in terms of duration time so use the bash $SECONDS variable to calculate the total amount of time it takes for a full XCI deployment. Moreover, use the 'ts' command to print a timestamp for every command executed. This will help developers identify tasks which take a lot of time to complete and possibly optimize them. Change-Id: I75a8cb8c05957bb205e63210d6cafaf54d989f32 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-02-21Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: playbooks: run-functest: Collect functest results" - xci: playbooks: run-functest: Collect functest results Add a new volume to the docker container which will hold the results from the functest run. Change-Id: I70541a8337c9198a97304312adfab74d4dd06b70 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-02-21Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Switch VM disk cache to 'unsafe' and use 'iothreads' for I/O According to the docs[1] "writeback: This mode causes the hypervisor to interact with the disk image file or block device with neither O_DSYNC nor O_DIRECT semantics. The host page cache is used and writes are reported to the guest as completed when they are placed in the host page cache. The normal page cache management will handle commitment to the storage device. Additionally, the guest's virtual storage adapter is informed of the writeback cache, so the guest would be expected to send down flush commands as needed to manage data integrity. Analogous to a raid controller with RAM cache." and "writeback: This mode informs the guest of the presence of a write cache, and relies on the guest to send flush commands as needed to maintain data integrity within its disk image. This is a common storage design which is completely accounted for within modern file systems. This mode exposes the guest to data loss in the unlikely case of a host failure, because there is a window of time between the time a write is reported as completed, and that write being committed to the storage device." "unsafe: This mode is similar to writeback caching except for the following: the guest flush commands are ignored, nullifying the data integrity control of these flush commands, and resulting in a higher risk of data loss because of host failure. The name “unsafe” should serve as a warning that there is a much higher potential for data loss because of a host failure than with the other modes. As the guest terminates, the cached data is flushed at that time." It's beneficial to use the host page cache to cache I/O from the guest instead of waiting for data to reach the actual disk device. We do not normally care about data integrity so data loss is not a problem. Moreover, we drop the cache configuration from the flavor files since it's independent of the flavor that's being deployed. [1] https://www.suse.com/documentation/sles-12/singlehtml/book_virt/book_virt.html#cha.cachemodes Change-Id: I118ffdf84b1be672185b3eff60fe5d0b5f1a590d Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-02-19Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - bifrost: scripts: bifrost-provision.sh: Set defaults for Ironic variables When running the bifrost jobs for the OPNFV 3rd Party CI, the Ironic variables are not defined and we get the following error: ./scripts/bifrost-provision.sh: line 112: BIFROST_IRONIC_INSPECTOR_VERSION: unbound variable As such, we need to provide reasonable defaults when we are running this script outside of XCI. Change-Id: I9cc3ae1b70494637a85558b9cae99fc1eeaebc74 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-02-14Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Bump OpenStack Ansbile SHAs * Bump up upstream SHAs * With these upstream SHAs, OSA installs neutron-agent container on controller node which would require eth12 interface on controller for establishing vlan provider networks. so adding eth12 interface and linking it with br-vlan over br-vlan-veth link. Change-Id: Iaf7cbe6e41dcfd15ec6527c5a50701f2d05eaad8 Signed-off-by: Markos Chandras <mchandras@suse.de> Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>
2018-02-14Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - bifrost: Add ability to pin Ironic-{,client,inspector,inspector-client} SHAs We should pin the SHAs for Ironic components as part of the regular bifrost bump to ensure maximum long term stability. This also bumps the bifrost SHA to the latest available one. Change-Id: Ia66d8ab6566db58e2ddab5134eb8445bd84d2a8f Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-02-14Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - bifrost: Always deploy Ironic from master The Ironic components are currently being installed from PIP but we should install them from the git repo instead so we can always try the latest code from master or the pinned version when such functionality is implemented. Change-Id: I0138c54befe52ed9df8bf617b78e063df3cf8750 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-02-07Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: scripts: vm: Use LVM backend if available" - xci: scripts: vm: Use LVM backend if available The CI nodes come with a big secondary mechanical disk which can be attached directly to the clean VM. As such, we split the disk into one logical volume per distribution and flush the qcow2 image to it before attaching it to the VM. If the XCI volume group is not available, then we revert back to using a file-based storage backend. Finally, we hide stdout/stderr from the package installation process to minimize the script output. Change-Id: I11ea82899c411f8a4168e5f23cbbd8187cc891df Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-02-06Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - bifrost: Bump bifrost sha1s to latest on master This change brings in the fix for policy.json removal. https://review.openstack.org/#/c/536349/ Change-Id: Ib18a99502c0ce61278e13f25a01622e073749d14 Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-02-05Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Rename Functest creds It follows the change "Rename a common credential file for OS and K8S" which stops forcing OpenStack creds. [1] https://gerrit.opnfv.org/gerrit/#/c/51283/ Change-Id: Ic83a2e696c9ea8821e29e6b3f4e69db25c528a0d Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-01Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Adapt to change in functest" - Adapt to change in functest Functest requires to read the variable TEST_DB_URL from the env. variables: https://gerrit.opnfv.org/gerrit/#/c/49757/ Change-Id: Idbfc2df989f5b2a8e6ddd2d9a9a70526dd9bf1f4 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-02-01Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Enable deltarpm" - Enable deltarpm DeltaRPM allows to install only the difference between an old and new version of an RPM, as consequence this reduces the network consumption in CentOS distros. Change-Id: I317fbac44ae5fb6d5293443e755e2b7ddd08c66e Signed-off-by: Victor Morales <victor.morales@intel.com>
2018-02-01Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: scripts: vm: Install additional packages to clean VM" - xci: scripts: vm: Install additional packages to clean VM Install some additional packages to the clean VM which can be useful during debugging. Moreover, we move the common distribution packages into a variable in order to simplify the code a little bit. Change-Id: I0405820900a15fec730a2bbfc95a1d1f3485bf0f Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-31Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "deploy kubernetes in XCI" - deploy kubernetes in XCI This commit introduces kubespray into XCI. k8s install currently assumes k8s install and OpenStack install cannot coexist. If XCI_INSTALLER is set to "kubespray" and DEPLOY_SCENARIO is set to "k8-nosdn-nofeature" the xci-deploy.sh would install kubernetes instead of OpenStack. The version of kubernetes is beta release v1.9.0 currently according to the master of kubespray it only support the ubuntu now. Opensuse and centos still need to develop and test. This patch create the directory xci/installer/kubespray, the related files of kubespray would be placed to it. The xci/installer/$installer/playbooks/configure-localhost.yml was moved to xci/playbooks/configure-localhost.yml as a common yaml file. You can modify some parameters according your need in xci/installer/kubespray/files/k8s-cluster.yml to deploy cluster. When deploying kubernetes, it would download the kubespray to releng-xci/.cache/repos/kubespray. If your flavor is Ha, it will download haproxy_server and keepalived to xci/playbook/roles, which setup haproxy service for kubernetes. Change-Id: I24d521a735d7ee85fbe5af8c4def65f37586b843 Signed-off-by: wutianwei <wutianwei1@huawei.com>
2018-01-29Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "correct the lookup logic for scenario's xci_overrides" - correct the lookup logic for scenario's xci_overrides Previously xci-deploy.sh looks up the xci_overrides files under $XCI_SCENARIOS_CACHE/${DEPLOY_SCENARIO} directory, but actually xci_overrides file resides somewhere in the nested directory level in both inband/outband scenarios. Hence the fix is done by using the find command. Change-Id: Icb507471e368f56290ef91d555673830b598e204 Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>
2018-01-29Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: Record deployment scenario when collecting XCI info" - xci: Record deployment scenario when collecting XCI info Add the DEPLOY_SCENARIO variable to the list of information we collect when deployment fails. Change-Id: I7081b80feea1d3d2ff83e54bd5e614b4ea98964d Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-29Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: run-functest: Add required functest packages The package requirements are the same across distros so we simply hardcode them in the task. Fixes the following problem: fatal: [opnfv]: FAILED! => {"changed": true, "cmd": "/root/run-functest.sh", "delta": "0:00:09.150226", "end": "2018-01-26 14:01:18.758704", "failed": true, "rc": 125, "start": "2018-01-26 1 4:01:09.608478", "stderr": "/root/run-functest.sh: line 14: wget: command not found Change-Id: Ib07acac18f8ece1111ee0706766f32005d0ac1da Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-25Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Integrate functest This change integrates functest in most easiest and messy way to get it up and running to bring functest into CI. The reason for this is that there are strange failures during functest healthcheck and it is important to look into those rather than beautifying how functest is integrated at this phase. Change-Id: I42e993be4aa15da022fa1e0069338447780f177e Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-01-23Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: scripts: vm: Retry when timer expires" - xci: scripts: vm: Retry when timer expires We should look again for active package managers when the timer expires to avoid locking issues. Change-Id: I88f0299a87befce17d11ba7581f0330979a25345 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-22Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: xci-deploy.sh: Drop warning for CentOS" - xci: xci-deploy.sh: Drop warning for CentOS The basic support for CentOS has been merged and it passes the CI so drop the warning. Change-Id: I70e6ba0fcd851d2eb9bfcb24d185276ed68c1005 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-22Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: get-opnfv-scenario-requirements.yml: Check if facts are set" - xci: get-opnfv-scenario-requirements.yml: Check if facts are set When the user selects an invalid combination then some facts may not be set so the deployment may fail in a crypt way like in the following case fatal: [localhost]: FAILED! => {"failed": true, "msg": "The conditional check 'deploy_scenario_installer' failed. The error was: error while evaluating conditional (deploy_scenario_installer): 'deploy_scenario_installer' is undefined\n\nThe error appears to have been in '/home/opnfv/releng-xci/xci/playbooks/get-opnfv-scenario-requirements.yml': line 114, column 11, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n when: item.installer == XCI_INSTALLER\n - set_fact:\n ^ here\n"} Change-Id: I931376d99bb178b15c4a9a71d47b48b01b858e4e Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-17Update git submodulesTapio Tallgren1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Enable running on CentOS/RedHat family Changes that make it possible to run XCI on CentOS: - Remove the check on xci-deploy.sh script that exists on RedHat family (including CentOS) and making the error into a warning. - Add centos to a distro in opnfv-scenario-requirements Change-Id: Ief6f1e50d8c7c9d8787641827e57682a6e0549e4 Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com> - Create CentOS networking configuration Change-Id: If8c0de44c313fdc22b1c7443b12d42769035c5b0 Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com> - Rename centos.yml to redhat.yml in configure-nfs/vars 'redhat' as a ansible_os_family covers both the RedHat distros and CentOS. Change-Id: I2ab56024d2c0f1f40a014a236cfd94ef38daad04 Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com> - Bump OSA-galera_server SHA to fix a CentOS issue Galera installation in CentOS fails because the mysqld.sock file is in a different location, despite what the my.cnf configuration tells. This has been worked around in upstream OSA-galera_server: https://git.openstack.org/cgit/openstack/openstack-ansible-galera_server/ commit/?id=f2bfbd38513ac8d61ba4e02a4d5ef6cbbca259cc Change-Id: Ied11571189eff8cbab0f1990a7599b51cad9ea2b Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com>
2018-01-10Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Rename 'nfvi' to 'installer' Using 'installer' to describe the tool that will deploy the foundations of a particular XCI scenario is more appropriate than NFVI which normally describes both the physical and virtual resources needed by an NFV deployment. Change-Id: Ib8b1aac58673bf705ce2ff053574fd10cb390d71 Signed-off-by: Markos Chandras <mchandras@suse.de> - xci: nfvi: OSA: Drop SUSE workaround The upstream patchset has been merged, so drop the SUSE specific workaround when obtaining the status of the galera cluster. Link: https://review.openstack.org/#/c/508154/ Change-Id: Ic990e6939fb794a532caf8af2759969198fa5d3a Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-08Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Record distribution and NFVI information for scenarios A scenario may only support certain NFVIs or distributions so we need a mapping with all these things so we know what can be tested and where. Change-Id: Ibf1b640b762085f58627e05e1d2ca13edfc4d716 Signed-off-by: Markos Chandras <mchandras@suse.de> - xci: Decouple VM distribution from host OS Introduce a new XCI_DISTRO variable to select the distribution to deploy on the VMs in order to make deployments more flexible and decouple the VM OS selection from the host one. The default value for this new variable is to match the host OS but users can always set it to one of the supported distributions. We can now simply execute the install-ansible.sh script instead of sourcing it in order to keep the environment as clean as possible. Change-Id: Ia74eb0422f983848cde0fb7b220ea1035dfa78bc Signed-off-by: Markos Chandras <mchandras@suse.de> - xci: nfvi: OSA: Remove duplicate xci-deploy.sh script It was committed by accident in c74cfd33fc3c ("xci: OSA: Move all the OSA specific playbooks to the NFVI directory") so drop it. Change-Id: I5de91f0aad750a9cb723a46baa63e75beb3180de Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-01-03Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "[XCI] move osa files into xci/nfvi/osa/files" - [XCI] move osa files into xci/nfvi/osa/files we maybe introduce other NFVI in the future in XCI. it is necessary to put the nfvi files to corresponding directory xci/nfvi/$NFVI/files, otherwise the files directory will be confused. Change-Id: Iea98167ff0bc8d338a94fe1c064ac0ab396c53d3 Signed-off-by: wutianwei <wutianwei1@huawei.com>
2018-01-02Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: scenarios: Fix location when copying scenarios to roles The location where we were putting the scenarios was wrong as it was placing them in xci/playbooks/roles/$scenario/$scenario so in the end the Ansible couldn't find the role we were looking for. As a result, the role was never executed. Moreover, we can use the synchronize module instead of the shell which should be both faster and safer. Change-Id: I3d996652bb6a62d23e259da5674d94596dad4d8d Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-22Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: playbooks: Copy local changes to scenarios" - xci: playbooks: Copy local changes to scenarios Make sure that any local changes to scenarios are being propagated to the checkouts. This should only happen when we are testing the 'master' branch of the scenario since it may be desirable to test a specific SHA in which case we shouldn't modify the checkout code. Change-Id: I4197f09a3e4d5a54c86905bc556b06e08948fbc2 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-22Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: nfvi: OSA: Set 'pipefail' when SSHing on the OPNFV host" - xci: nfvi: OSA: Set 'pipefail' when SSHing on the OPNFV host We need to set the 'pipefail' option so if an SSH command fails we stop the deployment instead of silently ignoring it just because the right leg of the pipe succeeded. Change-Id: Iebc720fbd3e6e96fc7135a6cf15e3c0941974d2c Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-22Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "bifrost: Bump bifrost SHA" - bifrost: Bump bifrost SHA Bump the bifrost SHA so we can get rid of the testvm.xml.j2 template which has now made it upstream. Change-Id: Ia9cdd999a5702f37125d38e0ba68bb31920d2117 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-22Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Bump sha on openstack-ansible-lxc_hosts" - Bump sha on openstack-ansible-lxc_hosts The commit 6b529de0315fe6cd12f6e78c00a5f2f2d3a01e28 in openstack-ansible-lxc_hosts reverts an earlier change that introduced systemd-networkd to lxc containers that run OpenStack services. This prevents the containers from being stopped (ie, lxc-stop fails until it times out), since systemd-networkd restarts. lxc-stop sends the SIGRT+3 message to the container which the container interprets as "halt". systemd-networkd conflicts with shutdown, so when the system tries to enter halt, systemd-networkd gets started again. As a result, the container does not shut down cleanly. This patch uses a version of openstack-ansible-lxc_hosts that does not use systemd-networkd in the containers. Change-Id: Ie85d2117ce2e6e8afa87810d690eab78e3b3be3d Signed-off-by: Tapio Tallgren <tapio.tallgren@nokia.com>
2017-12-22Update git submoduleswutianwei1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Fix the parameter of scenario directories 1. the "+" and "'" will be part of the string in the path parameter of ansible. So the directories we create are not right. we need remove these char. 2. it miss the "{{" in ansible variable Change-Id: I30c9804450588c63f5f18c63c1d90cd869fad90e Signed-off-by: wutianwei <wutianwei1@huawei.com>
2017-12-21Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: OSA: Move all the OSA specific playbooks to the NFVI directory" - xci: OSA: Move all the OSA specific playbooks to the NFVI directory Move all the playbooks that only make sense for OpenStack-Ansible deployments to the NFVI/OSA directory where they belong. This further disassociates XCI from OSA. Change-Id: Iab8b6dc81d9025a1d85608a98fb1eee0f1c6a69f Signed-off-by: Markos Chandras <mchandras@suse.de> Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-21Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: playbooks: Fix conditional for scenario/flavor fact We need to use proper jinja2 code to set the fact properly. Change-Id: I903233c0e059edf2af973ea9c08b8bd80795e1a9 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-20Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Rename variable OPNFV_SCENARIO to DEPLOY_SCENARIO" - Rename variable OPNFV_SCENARIO to DEPLOY_SCENARIO Rest of the OPNFV projects use the variable DEPLOY_SCENARIO so XCI should be aligned with them as well even though OPNFV_SCENARIO fits better than DEPLOY_SCENARIO. Change-Id: Id48c41fa8a1fa9493cfc7a4906f64b6d8ed27d64 Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-20Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Pin os_heat role to the version with working policy" - Pin os_heat role to the version with working policy Upstream change modifying policy.json results in failures with several heat test case failures with functest healthcheck. https://review.openstack.org/#/c/526306/ Using the policy.json from the earlier commit seems to solve the failures which is this https://git.openstack.org/cgit/openstack/openstack-ansible-os_heat/commit/?id=0b3eb9348d55d6b1cf077a2c45b297f9a1be730d Change-Id: Iaac0911e73743d1b628cc8d4abe460a0a2a66a84 Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-20Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Update osa version files for master branch as well This is needed in order to update the files before we attempt to run osa-periodic job. Change-Id: Ied5a53c294fd753039a6f79fa0ebce24b515cdba Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-18Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Increase ram of XCI VM and change disk cache type for all VMs" - Increase ram of XCI VM and change disk cache type for all VMs These options seem to help with the functest execution within XCI VM. Change-Id: I3b9b6b02fc571feb42543025f8ab179c6db18e0a Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-18Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "bifrost: Set vCPU model to 'host-passthrough'" - bifrost: Set vCPU model to 'host-passthrough' The default CPU model of QEMU GenuineIntel/QEMU Virtual CPU is not the best option for vCPU in terms of performance. As such, lets use the real host CPU. This has also been submitted upstream and the template should be removed once the upstream patch has been merged and the SHA for bifrost is bumped. Change-Id: I23d86933604c290d5650b73f420972d0a2b23dc8 Link: https://review.openstack.org/#/c/528677/ Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-18Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Add tacker to the list of components to install" - Add tacker to the list of components to install Tacker is already part of the upstream setup-openstack.yml but as releng-xci overwrites it, tacker does not get deployed. Adding it to the setup-openstack.yml of releng-xci does not disturb the other scenarios as it will only be deployed when the tacker container is defined which only happens when deploying odl-sfc Change-Id: Ifd76fc49369c114c55e966eb20658d82c99e14cb Signed-off-by: Manuel Buil <mbuil@suse.com>
2017-12-18Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: Move OpenStack-Ansible out of the main script" - xci: Move OpenStack-Ansible out of the main script In preparation for supporting more NFVIs in XCI, we need to make the main script NFVI agnostic. Right now, our NFVI is being deployed using bifrost+OSA so we keep bifrost in the main script since the hardware provisioning is NFVI agnostic (at least for now) but we move OSA to its own directory. This should allow more NFVI to plug into XCI by simply providing a nfvi-deploy.sh script. The user can select the preferred NFVI using the XCI_NFVI variable. Change-Id: Ieeacd3b22a64d363feff5d43ff23a80c39038837 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-15Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: scripts: start-new-vm: Use host-passthrough to use the real host CPU The host-passthrough mode will allow the VM to use all the host cpu features so it should provide the best possible CPU performance. Change-Id: I6ecd0363d046aaefa08f9e97144aa9ca9f1afae5 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-14Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: Add flavor information for scenarios" - xci: Add flavor information for scenarios Scenarios may not support all XCI flavors so record that information per scenario basis. This will resolve failures when we try to deploy a scenario that doesn't support the selected flavor. JIRA: RELENG-338 Change-Id: I5f73b139ee6c1831896aa32147c4dc1368673d92 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-14Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: scripts: vm: Use virtio for disk and network I/O" - xci: scripts: vm: Use virtio for disk and network I/O This ensures that the virtio paravirtualization driver is used for both disk and network I/O which should provide the best performance since we no longer need to emulate a real bus or driver. Change-Id: Ic46a38f51b06cb4b848d87d890d23fec022b2f15 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-14Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Drop AIO specific playbook The configure-opnfvhost playbook which is used for all flavors except AIO can also be used for AIO if it's adapted to not configure networking on the host and also do not fail if there aren't any OSA variables files available so lets do all that in order to avoid duplicating code across flavors. Change-Id: I58379d8b52094294b9349494753ffcdd44982013 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-14Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: Fix checkout location for OpenStack-Ansible" - xci: Fix checkout location for OpenStack-Ansible The OPENSTACK_OSA_PATH only makes sense on localhost. As such, when we use it on playbooks that operate on remote hosts, the result is not predictable. However, we rsync the entire releng-xci repository to the opfnv host so we can make everything predictable by simply clone everything in advance in the .cache directory. That directory is then rsync'd to the opnfv host. As such, we can repurpose the OPENSTACK_OSA_PATH to point to the path into the OPNFV host. Moreover, all external repositories are being cloned to .cache/repos so we can eliminate some variables in order to simplify the code. Finally, we bring back the ability to use an external OSA repository for development purposes. Change-Id: Ieef3e22ae2085f6735185634d555cfc0d4b69b39 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-13Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Reduce noise during bootstrapping There is too much noise when XCI is cloning repositories, installing packages etc so lets make the console output somewhat more readable. Change-Id: I15667e0349f943ad5488daf0e3cea9336c9166d1 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-12Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Restore the OPNFV_SCENARIO variable The variable was accidentally removed in ab3c9ad0f9a4 so bring it back. Change-Id: I48e4b8dd68969c8e5336e5e571a73f037fb65988 Signed-off-by: Markos Chandras <mchandras@suse.de>
2017-12-12Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Move contents of os-nosdn-ovs into os-nosdn-nofeature" - Move contents of os-nosdn-ovs into os-nosdn-nofeature This change fixes the scenario os-nosdn-nofeature by moving directories/files from os-nosdn-ovs to os-nosdn-nofeature. The contents of the files and variables are also either adjusted or removed in order to prevent impacts on CI. Change-Id: Icfde27f413c8f93d097f9f262c8cb1230b7fe59d Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2017-12-12Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Adapt to updated REST URL for OpenDaylight" - Adapt to updated REST URL for OpenDaylight Change-Id: Iae7ca106174c09a73bc72075dca0a753c2280f20 Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>