summaryrefslogtreecommitdiffstats
path: root/docs/submodules/releng-xci
AgeCommit message (Collapse)AuthorFilesLines
2018-11-06Removing remaining submodulesSofia Wallin1-0/+0
Change-Id: I492e8fa3336b1e267aaa22f3ebdca8f5de4d1362 Signed-off-by: Sofia Wallin <sofia.wallin@est.tech> Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
2018-11-06Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "[Baremetal] Provide networking for Ubuntu nodes" - [Baremetal] Provide networking for Ubuntu nodes When deploying baremetal, the traffic should be segmented using the different interfaces instead of through vlans. All the config is done based on idf and pdf information. When doing non-baremetal, opnfv and nodes get the same config. When doing baremetal, opnfv and nodes get a different network config Change-Id: I23aa576bc782c7c69d511a5558827110c37b558a Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-11-06Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Bug fix: NFS clients pointing to wrong server" - Bug fix: NFS clients pointing to wrong server We are deploying the NFS server in computes. In all flavors, node2 takes the role of compute00 and thus the NFS server is in 172.29.244.12. Therefore, the openstack config for ha is wrong Change-Id: I5e82ddd670b44e291c0b866ba4fde57e74b68643 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-11-06Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Simplify the serial config" - Simplify the serial config The current configuration only dumps the booting info into a file and the pty does not work (i.e. virsh console opnfv returns a failure because it cannot find a character device). After some investigations, it is apparently impossible to have both active: https://github.com/Mirantis/virtlet/issues/249 Therefore, we should remove the pty part of the xml. To connect to the VM in case of network problems, we can always use vnc. Apart from that, the console part is not necessary as libvirt will create that one for us Change-Id: I80a59163b4ba4e6bff34cb5378893201e93ddb87 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-11-05Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: files: Also collect BIFROST env variables for bug reports" - xci: files: Also collect BIFROST env variables for bug reports Bifrost is exposing quite a few variables so we need to collect them as well. Change-Id: I7e7ca7a093f35a0acb53af360e58444f6c1de7e4 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-11-05Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Bump kubespray version to 2.7.0 installer-type:kubespray deploy-scenario:k8-nosdn-nofeature Change-Id: I6b59df5112e9b3459bf3147557f5f22fe0fb778b Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-11-05Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: osa: Bump SHAs to the HEAD of the Rocky branch Change-Id: I50c367433dc8cf8964c291c916ea939e25f638cb Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-11-02Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Add missing update_cache statements When we install packages from the distro repos we need to make sure that the database is updated. This also takes SUSE's zypper pkg manager into consideration which can benefit from the same Ansible option. Change-Id: I7a2206bfc5827b9ccb448278759711c560bb4679 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-10-31Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Bug fix: Fetch vm names from idf Currently we were taking the names of the nodes to be generated from the NODE_NAMES variable whereas ansible was fetching the names from the dynamic_inventory.py which uses idf. This resulted in problems: when doing ha, ansible was provisioning a compute as a controller and vicebersa. This patch forces create_nodes role to fetch the name from idf and thus align with the naming schema of ansible deploy-scenario:k8-calico-nofeature installer-type:kubespray Change-Id: Id1473727405701fd9ed0cb2f1394ee8676cec337 Signed-off-by: Manuel Buil <mbuil@suse.com> - Remove variable for driver Right now, we only support ipmi hosts (either virtual or physical) and that is why our json is always describing the ipmi parameters. It does not make sense that we have a variable which would allow to change that Change-Id: I7b88aca5930a73d68342e3d4cf21f9e96286c4d7 Signed-off-by: Manuel Buil <mbuil@suse.com> - Bug fix: Wrong reference to vm_host_groups The variable should be host_group which is generated at line 32 and 35 Change-Id: I7add3af73198ec0638dee0c8f189a3a372a78ee8 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-26Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Change variable in start-new-vm.sh Since the patch: https://gerrit.opnfv.org/gerrit/#/c/63173/ The variable BIFROST_USE_PREBUILT_IMAGES has changed to BIFROST_CREATE_IMAGE_VIA_DIB. As jenkins does not trigger testing jobs when editing file in xci/scripts/, this change is done in a separate patch Change-Id: I3bc285936fae5b7514272ca0ad2418b60446e4aa Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-26Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "SHA bump for bifrost" - SHA bump for bifrost We need it for baremetal support in opensuse: https://github.com/openstack/bifrost/commit/0f605cd723a68e2c2bb9b30a15a08e5aba777bd5 We move all related repos from Rocky to master (problems if we SHA bump ironic, etc in Rocky while Bifrost in master) Change-Id: Icf0dd58c6fc6cc8f221d37a6ed3f3746f6577716 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-26Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Reduce complexity when using bifrost roles" - Reduce complexity when using bifrost roles We are using two variables which have a similar scope: - create_image_via_dib - use_prebuilt_images We could use one of them and not both. create_image_via_dib is selected because it also exists in upstream bifrost use_prebuilt_images = false is the same as create_image_via_dib = true use_prebuilt_images = true is the same as create_image_via_dib = false Change-Id: Ieaab78f1dc2d199746a2b13ebc82e9dc615d92e9 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-26Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Bug fix: match only the scenario name" - Bug fix: match only the scenario name Since this week we have two sfc scenarios: - os-odl-sfc - os-odl-sfc_osm When $DEPLOY_SCENARIO=os-odl-sfc, using the current code testing_role gets two values: os-odl-sfc os-odl-sfc_osm This patch adds '$' character to prevent matching scenarios which concatenate characters after $DEPLOY_SCENARIO Change-Id: Ia0782362da04e8b3ecd2ec6f13ccc8c404797fda Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-26Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - os_neutron SHA bump We need a commit for SFC scenario: https://github.com/openstack/openstack-ansible-os_neutron/commit/200fa4a7aaa15a6d6758418eafffe093174d2f72 Change-Id: Ia497a49a910d16eaf3c7ee896f0f75aab812bd7a Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-25Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Introduce the Barbican in XCI for SFC-HA scenario" - Introduce the Barbican in XCI for SFC-HA scenario The barbican OS component is introduced for SFC HA deployed scenario. The reason behind is that In HA scenarios we need Openstack Barbican to gather and store the fernet keys so Tacker can access them and be able to register new VIMs. deploy-scenario:os-odl-sfc installer-type:osa JIRA: SFC-131 Change-Id: Ife416fb2a7dc04ddadc93f962695aee4ed448501 Signed-off-by: Panagiotis Karalis <pkaralis@intracom-telecom.com>
2018-10-25Update git submodulesVenkata Harshavardhan Reddy Allu1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Integrate os-odl-sfc_osm scenario into XCI https://gerrit.opnfv.org/gerrit/#/c/63505/ The os-odl-sfc_osm scenario has been verified in the previous patchsets of this commit. This patch needs to be merged after adding OS variables to the post-deployment playbook. https://gerrit.opnfv.org/gerrit/#/c/63135/ installer-type:osa deploy-scenario:os-odl-sfc_osm Change-Id: I14e83357c9e1db6e31890b5f126b9e405e124594 Signed-off-by: Venkata Harshavardhan Reddy Allu <venkataharshavardhan_ven@srmuniv.edu.in>
2018-10-24Update git submodulesVenkata Harshavardhan Reddy Allu1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: Add OS variables to the post-deployment playbook OSM needs access to OpenStack credentials and authentication url. This patch would provide that using the xci_flavor specific user_variables.yml file. This patch is necessary to complete the initial integration of OSM. installer-type:osa deploy-scenario:os-nosdn-osm Change-Id: Ic228b323fc69ce46c8093f6dfbc116d8c71a0391 Signed-off-by: Venkata Harshavardhan Reddy Allu <venkataharshavardhan_ven@srmuniv.edu.in>
2018-10-18Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "[Baremetal] Add baremetal support to create-nodes" - [Baremetal] Add baremetal support to create-nodes Information about baremetal servers is collected for ironic to do the provisioning. Two main things are done: 1 - baremetalhoststojson.yml fills the json config file fed to ironic so that it knows how to boot the blades. In the baremetal case, the create_vm.yml playbook will only create opnfv vm. The variable vms_to_create holds that information. The variable baremetal_nodes specifies the physical nodes (empty when non baremetal deployments) 2 - For PXE to work, we create a file called baremetalstaticips that has the mapping between mac address from servers and its ip. That file is moved into the dnsmasq config directory Change-Id: I0e788db1deb50769c183b71524a68ac0b925f8aa Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-18Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: osa: Bump SHAs to the HEAD of the Rocky branch Since Rocky, networking-odl depends on ceilometer and requires it to be installed. Therefore, all odl scenarios need to have ceilometer deployed. Once that is done, we can unfreeze n-odl repo. Besides, we need to introduce a SHA bump for neutron and ceilometer to include the latest changes to support this fix Ceilometer should be git cloned always, otherwise repo_build will fail as ceilometer is now part of requirements.txt [mchandras: Instead of just bumping selective network related roles, lets just do a complete sha bump for stable/rocky] deploy-scenario:os-odl-sfc installer-type:osa Change-Id: I81a39436e4ff648faabda4e82fce1d3f14615741 Signed-off-by: Manuel Buil <mbuil@suse.com> Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-10-18Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Add ODL variables to env file" - Add ODL variables to env file ODL testcases in functest require new variables: https://git.opnfv.org/functest/tree/functest/utils/env.py#n22 Otherwise the test fails because it cannot contact ODL To find those variables, we fetch the ml2_conf.ini file from the neutron container and then we parse the values. This is only run when the scenario has odl deploy-scenario:os-odl-sfc installer-type:osa Change-Id: If175bb7642e66e151b30e1ccd1b9040aa3481d8f Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-16Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - [baremetal] Add two interfaces to the opnfv vm opnfv vm requires connectivity to two physical interfaces of the host. These interfaces are: 1 - admin, where DHCP requests will arrive from blades to do PXE boot 2 - mgmt, which connects to the mgmt of the blades to do the ansible configuration To achive this, it is required: 1 - Two libvirt networks that connect to two different linux bridges. The important physical interfaces are connected to them. The interfaces name is fetched from the idf 2 - Two templates representing the new libvirt networks (net-mgmt.xml.j2 and net-admin.xml.j2) 3 - Two interfaces defined in vm.xml.j2 Change-Id: I9037aa36802cfde44717b9394bab79b22d7dfaab Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-16Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - [Baremetal] Modify interaction with bifrost roles Change some of the variables when calling opnfv-virtual.yml and baremetal=true: 1 - We want to configure DHCP mapping between ip and mac when doing baremetal. The create-nodes role will generate a file with that mapping for us (baremetalstaticips) 2 - Don't download the standard IPA image but build one with Fedora (only one that works in ericsson-pod2) when doing baremetal 3 - Wait for the blade to complete its booting. Its ssh port becomes available with the IPA provision but that is not the final state. We need to wait until the required distro gets installed. When not doing baremetal, this is fine as the VMs boot very fast with the chosen distro but for baremetal it takes a while (ericsson-pod2 servers take around 2 minutes to finish all BIOS booting). The playbook wait-for-baremetal.yml does this. Change-Id: I5536517209ff7f46ec034554d29566707778e397 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-13Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Simplify external networking for os" - Simplify external networking for os We were right now creating an overlay network with gateway in the opnfv vm. This makes floating ips work but if we need internet connection from vms, things get complicated and messy. As we are only using up to 7 ips from the 192.168.122.0/24, we can consider it the provider network for openstack and use ips starting from 192.168.122.100 as floating ips or ips for routing (doing SNAT as always) Change-Id: I09af663069ae95a9d265d98f1531778eb37134e2 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-13Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Fix idf for k8s deploy-scenario:k8-calico-nofeature installer-type:kubespray Change-Id: If1c9f5908f39f9c09efb86e27a3f3883b4cd75b9 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-13Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Update bifrost SHAs There is a bug when ironic communicates with rabbitmq due to a parameter deprecation. This patch fixes it: https://review.openstack.org/#/c/609499/ And we can take the opportunity to update all SHAs THere is a problem: "Unable to retrieve file contents\nCould not find or access '/home/opnfv/releng-xci/xci/infra/bifrost/playbooks/roles/common/venv_python_path.yml'"} That file is in: /home/opnfv/releng-xci/.cache/repos/bifrost/playbooks/roles/common/venv_python_path.yml As I am not sure how to fix the ansible PATH, for the time being, I just added to where Ansible is searching for it Change-Id: I8e60f43ed7fc78a8925efaa36e41b0d872ea9a74 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-04Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "[Baremetal] - Change roles and playbooks names" - [Baremetal] - Change roles and playbooks names A few playbooks and the create-vm-nodes role should change the name to reflect the new reality once the baremetal patches are merged. The playbooks that must change the name are: - xci-prepare-virtual.yml - xci-create-virtual.yml Change-Id: Iaed1f93561fa9d39c7916e0643a5445cdddf4f97 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-04Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Bug fix: Remove use_prebuilt_images condition The creation or not of the IPA image does not depend on the value of the use_prebuilt_images. This variable is intended to control the following call to bifrost-create-dib-image role. I added a few comments to clarify what we are doing in each call to the bifrost-create-dib-image role Change-Id: Id66e1a969ca279a055640481719f118744eedf38 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-02Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - [Baremetal] Include a baremetal variable It switches between parts of the code which are specific for baremetal or non-baremetal. Those parts come with this patch: https://gerrit.opnfv.org/gerrit/#/c/60797 It also selects different variables when calling the opnfv-virtual.yml playbook: https://gerrit.opnfv.org/gerrit/#/c/60795 It decides the value of BAREMETAL based on the vendor value of the pdf Change-Id: I8e6171f4f21db7f814a472e6ed1bacb30220b4ec Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-10-02Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - [baremetal] idf for opnfv_vm and update the pdf Physical hardware PODs provide a pdf and a idf to describe hardware and other information (e.g. what is the purpose for each interface). To reuse the same code for opnfv vm and also become consistent, we should also describe the opnfv vm with an idf and a pdf. This patch simplifies what needs to be done for baremetal, especially for this (future) patch: https://gerrit.opnfv.org/gerrit/#/c/60797/11 As we add an idf, we should update dynamic_inventory and how we create the opnfv vm. Obviously, he opnfv_vm.yml gets removed. Change-Id: I930728474631fc214e4a9adc8581e0c16d230176 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-09-28Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Add idf and pdf to the xci-create-virtual.yml This patch complements this other: https://gerrit.opnfv.org/gerrit/#/c/62575/2 We require the pdf and the idf (when doing baremetal) in the create-vm role, so we should propagate that variable to the playbook that triggers those roles Change-Id: I15806d386db4e6b11192829f2dbc61662bffec2b Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-09-20Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: Add ability to pass command line options to xci-deploy.sh" - xci: Add ability to pass command line options to xci-deploy.sh We now support multiple PDF files so instead of introducing another env variable, we can simply pass this information as command line arguments to xci-deploy.sh. We can extend the script to allow more options line verbosity, scenario name, functest details etc so we can get rid of multiple env variables. Change-Id: I6c4a8d6e8b70e91746a659de923fee19019ed5e0 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-09-20Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Docs transition" - Docs transition Changes are made by following https://docs.opnfv.org/en/latest/how-to-use-docs/local-build-transition.html Change-Id: If0ee2031894d4dbd54098548640b8cc71481e49f Signed-off-by: Fatih Degirmenci <fdegir@gmail.com> Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
2018-09-19Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "[Baremetal] Add ericsson-pod2 pdf and idf" - [Baremetal] Add ericsson-pod2 pdf and idf Provide the idf and pdf for ericsson-pod2 deployment This is aligned with the pdf and idf from pharos lab: https://github.com/opnfv/pharos/blob/master/labs/ericsson/idf-pod2.yaml https://github.com/opnfv/pharos/blob/master/labs/ericsson/pod2.yaml Change-Id: Ic5b62a5751e5977affbbeb94937738434de5b3ab Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-09-18Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Switch to Functest Hunter A new var FUNCTEST_VERSION is introduced to jobs to control the version to use for Functest. Change-Id: Ice7aa9f910db2353ce3d0bef198bef9fa3efe9fd Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-09-16Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: Drop custom XCI certificates" - xci: Drop custom XCI certificates OSM requires a CA even when we create a self-signed certificate. We don't actually need to do that since HAproxy and friends can create the whole chain for us, so we can finally get rid of this playbook. installer-type:osa deploy-scenario:os-nosdn-nofeature Change-Id: I14a3adbe3492cd6c562c5167c42dd45756e8e3dd Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-09-13Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Enable post-deployment for k8s based scenarios k8-calico-onap scenario will have post deployment tasks to install ONAP using OOM so post-deployment tasks are required to do that. deploy-scenario:k8-calico-nofeature installer-type:kubespray Change-Id: I67c8188cb573f6fc5c80e15a9101cacca1b7b10e Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-09-12Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: osa: Bump SHA for os_neutron We require the following patch to deploy ODL when using Ubuntu https://review.openstack.org/#/c/597003/1 This SHA bump adds it Change-Id: I0382a4c3946aeff2ddd86a932055dd770c520c74 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-09-10Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: osa: Bump the SHA for the openstack_openrc role Previous bump missed the latest SHA for this role and yardstick started failing again due to the incomplete openrc file. Change-Id: I73f024250c73a42a6c2a36acaf8b1f8c6867dd2a Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-09-07Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: osa: Update OSA SHAs to the HEAD of the Rocky branch Change-Id: I012f829c124d665d7d8d9ebb6b18a72d6d73258f Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-09-06Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "playbooks: configure-opnfvhost: Ensure we copy only the tracked files" - playbooks: configure-opnfvhost: Ensure we copy only the tracked files This prevents rsync spending time copying temporary files which may have been created during a CI run. deploy-scenario:os-nosdn-nofeature installer-type:osa Change-Id: Ie02e0dbfc06b8fac40d6b90c4c99e361ecf1c0b2 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-09-06Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: infra: bifrost: Allow DNS overrides" - xci: infra: bifrost: Allow DNS overrides Deployers may want to use a different DNS server so allow them to override the ipv4_nameserver option. If the variable is not set, then we use the libvirt DNS if we are behind a proxy, otherwise we default to the Google DNS. Change-Id: I96cf63758902d4aae3d155b2e8beef650449ebc9 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-09-05Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Fix the default scenario name for K8S Yardstick testing" - Fix the default scenario name for K8S Yardstick testing deploy-scenario:k8-nosdn-nofeature installer-type:kubespray Change-Id: Ieb531b66bd36bbf8c28f755a52a98f0b41ae5efa Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-09-05Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Revert "Set OS_INSECURE to true for Yardstick"" - Revert "Set OS_INSECURE to true for Yardstick" The issue is fixed upstream. This reverts commit 40ecfaf96e73520f3a2358c46cd97c1f6c3b58c6. Change-Id: I8268372173721157d239c1978cdfe8d035613854
2018-09-05Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: osa: Update openrc role" - xci: osa: Update openrc role This update fixes the values for OS_INSECURE and OS_VERIFY Change-Id: I7d49bd493bde18f40122721188b006052cf7a901 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-09-05Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Set OS_INSECURE to true for Yardstick Change-Id: I0ec6755cb9f9a5b79b359d544082f966903d42bd Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-09-05Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "Enable yardstick k8s" - Enable yardstick k8s installer-type:kubespray deploy-scenario:k8-nosdn-nofeature Change-Id: If81aef632b064565fbf5c308909b44ff7409c33e Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-09-05Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Fix openrc OS_CACERT for yardstick docker container The openrc should contain the path to OS_CACERT within container, not on opnfv vm. Change-Id: Ief4cb4ae647ff0f2cd4f3ebe8a2993bb71b0363f Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-09-04Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Create script to run yardstick The created script runs the yardstick in similar way the functest script does. installer-type:osa deploy-scenario:os-nosdn-nofeature Change-Id: Ic03445ec03fcfec8dc0d09f638e7cb1187fef883 Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-09-04Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: osa: Restore self-signed XCI certificate This reverts commit cc583f30f881ba956fb4f1402aa4dd1608b27da2. We still need to have control over the generated certificates so lets keep creating our own. deploy-scenario:os-nosdn-nofeature installer-type:osa Change-Id: I9e730bce2dba578ca0b561b168eaf1c2eca1282d
2018-09-04Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - xci: osa: Update ansible role for configuring the proxy server The old role has disappeared so we have to use another one. Change-Id: I8533912a19680e93a9cf061109019a0801485936 Signed-off-by: Markos Chandras <mchandras@suse.de>