summaryrefslogtreecommitdiffstats
path: root/docs/submodules/nfvbench
AgeCommit message (Collapse)AuthorFilesLines
2018-05-16Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-94 End to end traffic test triggers too early on chatty network Change-Id: I995cf3209ec4ac8c324e2bc4bee202e0639bf0b3 Signed-off-by: ahothan <ahothan@cisco.com>
2018-05-16Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-92 nfvbench should not look for neutron network in case of l2-loopback Change-Id: I2fc7a46e23d7a989942eb62a4ca9afec8b992088 Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-27Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-89] Fix exception losing original tracebacks Change-Id: I7e94d6209603c622fc0a0ea22fdd21ea09f1bbaa Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-25Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Update doc Change-Id: I71bcf634033c78866d6808a4604b33629710ec23 Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-24Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-88] Fixed rate run: reported RX rate should be swapped in Run Config Table swap the RX rates so that each direction has the far end RX rates Change-Id: Ib78b7721b07285f5173ca8d6f29f18873eb91df9 Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-24Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-86] In case of lossy loopback device, packet drops are reported incorrectly This is only for fixed rate runs, the chain analysis table at end of run may contain incorrect drops. Change-Id: I6656528ed695a60003c672132624a7284db60497 Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-23Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-87] In case of asymmetric actual Tx rate, total drops is calculated incorrectly Use far end TX counter to calculate dropped packets at given RX port. Change-Id: Icfffb390e2e557f0bad2e9ddf685510decc25b27 Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-16Update git submodulesmortenhillbom1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-85 Add option to verify L2 loopback at TOR switch Change-Id: I2c67ae66883ddb1214d39a55723772841b57b3bc Signed-off-by: mortenhillbom <mhillbom@cisco.com>
2018-04-12Update git submodulesmortenhillbom1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-84 Report results with requested L2 frame size Change-Id: Ie7a8795cd0cb16b881a4e2aec68ff1e3dd6741b1 Signed-off-by: mortenhillbom <mhillbom@cisco.com>
2018-04-10Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-83] Add option to display status and to cleanup Change-Id: If135fedee4e5ee9226a262800917c4c35bc83bc7 Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-04Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move Docker build to tag 1.3.1 Change-Id: Ida8e9223300add358cfb5ed085274131da16934e Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-04Update git submodulesAlec Hothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Merge "NFVBENCH-80 latency stream for IMIX uses 1518B frames" - NFVBENCH-80 latency stream for IMIX uses 1518B frames Change-Id: Ie37202001816ec0b9a8f3ecc08c7ec8c097a5d61 Signed-off-by: Kerim Gokarslan <kgokarsl@cisco.com>
2018-04-04Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-81]With some Intel X710 NIC cards, NFVbench reports erroneous RX counters Work around this NIC FW issue by using port level stats for packets/bytes ALso fix mutliple calls to get_stats() Change-Id: Id19086d0db6bcc4417adff4ed4ce9606ffb30fe2 Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-03Update git submodulesKerim Gokarslan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-79 TRex latency stats requires at least 18B payload size Change-Id: I4add34e853d5b5a37efc877eb183a1fdc622d78a Signed-off-by: Kerim Gokarslan <kgokarsl@cisco.com>
2018-03-31Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Update release notes Change-Id: Ib726a626f157159b69ab1b63c311ce1bd7032170 Signed-off-by: ahothan <ahothan@cisco.com>
2018-03-25Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Build docker container with 1.3.0 Change-Id: If8c4612c394990f2f7de73919381a229d8977433 Signed-off-by: ahothan <ahothan@cisco.com>
2018-03-25Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-77] Config plugin misses config options coming from REST requests Pass latest config to get_run_spec() Change-Id: I169f482faa0ba016d266db006da45e3fe0bb4331 Signed-off-by: ahothan <ahothan@cisco.com>
2018-03-25Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-76] REST API remains in running state in case of exception catch the exception if result key is missing Change-Id: Id212497bb760b835b542afd11ffbe149bc3d46e7 Signed-off-by: ahothan <ahothan@cisco.com>
2018-03-24Update git submodulesKerim Gokarslan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-56 Multi-chaining traffic starts may be too early for some runs Change-Id: I332a53e3dd3e14e9cba4ad9f57bdfd094ffa4d3a Signed-off-by: Kerim Gokarslan <kgokarsl@cisco.com>
2018-03-23Update git submodulesKerim Gokarslan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-78 TRex requires at least 16 payload bytes Change-Id: Iacdafc624857698c8c9ac481daa050a42c1995b6 Signed-off-by: Kerim Gokarslan <kgokarsl@cisco.com>
2018-03-20Update git submodulesAlec Hothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Merge "NFVBENCH-75 fluent logger configure not override by -c my_config.yaml" - NFVBENCH-75 fluent logger configure not override by -c my_config.yaml Change-Id: I139037069d930ca5c15078c455933f3e5eebe484 Signed-off-by: Kerim Gokarslan <kgokarsl@cisco.com>
2018-03-20Update git submodulesmortenhillbom1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-73 vlan_tagging parameter cause exception Change-Id: Ia2f091dfd05004806637e3e15076e04aa31bd433 Signed-off-by: mortenhillbom <mhillbom@cisco.com>
2018-03-16Update git submoduleslouie.long1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-74] packet payload length without vlan fix packet playload length without vlan tag, ensure that the minimum packet size is 64 bytes with or without the vlan tag Change-Id: Iabea46756905e3b16791436642cdca58ec8fed6f Signed-off-by: louie.long <longyu805@163.com>
2018-03-03Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move docker container to tag 1.2.7 Change-Id: I556204e6d64b3b71402f65ba3cc1b63e3969e0ca Signed-off-by: ahothan <ahothan@cisco.com>
2018-03-03Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-72] ARP retry log may cause exception Fix exception - use proper type May happen when retrying wait for ARP replies Change-Id: Idc33926306268b662117deba499a35eac66affc4 Signed-off-by: ahothan <ahothan@cisco.com>
2018-02-28Update git submodulesmortenhillbom1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-71 Send runlogdate as date instead of 0 Change-Id: Ibb0845038ed9694309b04e360e71f6ff6f1d5a25 Signed-off-by: mortenhillbom <mortenhillbom@gmail.com>
2018-02-27Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move to tag 1.2.6 and nfvbenchvm 0.6 Change-Id: Ib38e033baca0145db3cc940ca92c5ba73d5717e7 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2018-02-27Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-70] Update nfvbenchvm to 0.6 1. Update kernel to 4.4.118-1.el7.elrepo.x86_64; 2. Update to build testpmd off DPDK 18.02; 3. Update txd/rxd of testpmd to 256/1024; 4. Update VPP to 17.10-9~gd594711~b55.x86_64; Change-Id: I1321b306143d1daf81f8a984ad7739a980c5cfb9 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2018-02-24Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move to tag 1.2.5 Change-Id: Ibb4047d8de260cbcf5409fcff703ada08d73b209 Signed-off-by: ahothan <ahothan@cisco.com>
2018-02-23Update git submodulesAlec Hothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Merge "Fix for bug with external chain and no arp" - Fix for bug with external chain and no arp The validation of MAC addresses was placed incorrectly Change-Id: I9a0e1f06699eadd0dff091078c132c5664aeea56 Signed-off-by: Michael Pedersen <michael.soelvkaer@gmail.com>
2018-02-22Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-68] Skip bonding interfaces for interface discovery Change-Id: I446f02366a7d1801dc6740657bfea23f73bc27c7 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2018-02-19Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move docker build to 1.2.4 Change-Id: Id923d9a7217fe91b7940e059e1bda7503e846687 Signed-off-by: ahothan <ahothan@cisco.com>
2018-02-16Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-67] NFVbench should have same TX rate for different rate formats Change-Id: I55e03319efba353dd3067b8b946815b631a87896 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2018-02-16Update git submodulesmortenhillbom1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-66 Fixed rate run with multiple frame sizes sends same tx/rx results for all frame sizes Change-Id: I549c2504dfb95718ef60c82c4b20256fc5939c8c Signed-off-by: mortenhillbom <mortenhillbom@gmail.com>
2018-02-10Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move docker build to 1.2.3 Change-Id: Ic71b41027bf580c5110c0fe2fb3128eec77681cc Signed-off-by: ahothan <ahothan@cisco.com>
2018-02-10Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-65] 1.2.2: AttributeError: 'RunningTrafficProfile' object has no attribute 'software_mode' Fix exception Change-Id: Id95c31d8ba999e0da39fa07c4e31e696da89d98e Signed-off-by: ahothan <ahothan@cisco.com>
2018-01-25Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move to tag 1.2.2 Change-Id: I358ebcb7528368ad68752c66810356b50caa482d Signed-off-by: ahothan <ahothan@cisco.com>
2018-01-24Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-63] Make sure CLI overrides the default configs Change-Id: I5e94f130758d3c1dbf6aaeeda276463576b97394 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2018-01-17Update git submodulesMichael Pedersen1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-58] Add option to specify dest MAC with EXT CHAIN when ARP is disabled Change-Id: Ia605d7314d8047e84c5e17088ed5ce588a50e256 Signed-off-by: Michael Pedersen <michael.soelvkaer@gmail.com>
2018-01-16Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-62] Add support for non-openstack environments Add Unit test to validate non-openstack with dummy traffic gen Change-Id: I359ddb7d43169f706d8262842af975d5b4675a3a Signed-off-by: ahothan <ahothan@cisco.com>
2018-01-05Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Multiple bugfixes for NFVbench [NFVBENCH-52] NFVbench should ignore the port security settings if not available [NFVBENCH-53] NFVbench should support to use software mode for TRex [NFVBENCH-54] NFVbench container should also map kernel sources when available to build KOs [NFVBENCH-55] Documentation enhancements to have better examples for using "$PWD" [NFVBENCH-57] NFVbench should support to build kernel modules on redhat distros Change-Id: Id6792d6711393b07ca59396c276a026bec9f1e86 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2017-12-22Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-59] Add Unit Testing of the NDR/PDR convergence algorithm using the dummy traffic gen [NFVBENCH-60] Fix pylint warnings Change-Id: I72deec060bf25774d1be33eaeefc74b42a576483 Signed-off-by: ahothan <ahothan@cisco.com>
2017-12-04Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Fix typo in documentation Change-Id: Icc3ba2e0874e2c67ab803fc969834a9448503ad0 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2017-12-01Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Move container to tag 1.2.1 Change-Id: I873c852f47d5ba2e3098908919f2b66dce02a1e8 Signed-off-by: ahothan <ahothan@cisco.com>
2017-12-01Update git submodulesKerim Gokarslan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-50 Update TRex to 2.32 Change-Id: Ic88b7530db6d2845e3a466b676cb250dfdf02409 Signed-off-by: Kerim Gokarslan <kgokarsl@cisco.com>
2017-12-01Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-49] Fix the regression issue and support VPP Change-Id: I7a2e000e80ea624b279b9d0aa99a21c3f33c989d Signed-off-by: Yichen Wang <yicwang@cisco.com>
2017-11-29Update git submodulesKerim Gokarslan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-48 Check gsutil when building the vm image Change-Id: I2c049679be27c4404ba859d30c8b37f17b60496f Signed-off-by: Kerim Gokarslan <kgokarsl@cisco.com>
2017-11-28Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Fix docker container to pick VM image 0.5, enhance doc diagrams Add SRIOV packet paths Change-Id: I0f082fd3443e41dec81ab1847726107b07ea9b52 Signed-off-by: ahothan <ahothan@cisco.com>
2017-11-27Update git submodulesYichen Wang1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - Add support to use vswitch to handle V2V in PVVP SRIOV scenario 1. Add support to use vswitch to handle V2V in PVVP SRIOV scenario 2. Update nfvbenchvm to 0.5: (1) Update VPP to 17.10; (2) Update DPDK testpmd to 17.08; (3) Change kernel to based on longterm lineup; Change-Id: I944489579a4cd92d17075e80870bbdb32512a150 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2017-11-10Update git submodulesKerim Gokarslan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - NFVBENCH-46 Change names of identity v3 fields Change-Id: Icfdad8f8ad105a3dfce64efaceeb0ae8f1430e97 Signed-off-by: Kerim Gokarslan <kgokarsl@cisco.com>