summaryrefslogtreecommitdiffstats
path: root/docs/submodules/fuel
AgeCommit message (Collapse)AuthorFilesLines
2017-10-30Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "lib.sh: rm Ubuntu boot entry on EFI systems" - lib.sh: rm Ubuntu boot entry on EFI systems On EFI-enabled systems, grub-install from grub-efi-* package installs a boot entry named "ubuntu". MaaS relies on IPMI to set boot order to PXE first; however on systems with buggy firmware or without full IPMI support, that fails, leading to booting Ubuntu from hard disk instead. Work around this by clearing any previous Ubuntu boot entry from board flash, before starting a new baremetal deploy. NOTE: This only runs against nodes that are online from a previous deploy. Closes: ARMBAND-47 Change-Id: I1c4ece09e42845ce2a1b7119ec69e46e5ca12376 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-29Update git submodulesTaseer Ahmed1-0/+0
* Update docs/submodules/fuel from branch 'master' - docs: Spelling correction Change-Id: I35076b8cd81451482944d91f3dd3337dd849ef28 Signed-off-by: Taseer Ahmed <taseer94@gmail.com>
2017-10-27Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - patches: pharos: Dynamic PXE interface index Change-Id: I7eae35c2e040cf316af45fd420ba6611abb2fa4b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-27Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - patches: pharos: IPMI: Trim netmask from IP ericsson-pod1 uses 'IP/netmask' format for IPMI IPs in its PDF, which is part of PDF spec, so update our installer adapter template accordingly. This change will be reverted once the patch is merged upstream in Pharos OPNFV git repo. Change-Id: Ie97177444f0445501fc0a7b131569ff1af6fee3c Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-27Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "ci/deploy.sh: Add PDF parsing dependencies" - ci/deploy.sh: Add PDF parsing dependencies The following packages are required for PDF parsing: - python - python-ipaddress - python-jinja2 Note that `python-ipaddress` is not available on older Ubuntu distributions (e.g. Trusty), in which case `pip` should be used to install it. An alternative would be to use python3 packages. Update the installation instructions to specify minimum expected requirements on the jump server. JIRA: FUEL-292 Change-Id: I19fdcc163dcfdee45ac6fa3f5e09a28638d6035c Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-27Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "lib.sh: Fix compatibility with bash 4.2" - lib.sh: Fix compatibility with bash 4.2 JIRA: FUEL-296 Change-Id: Ide9f9333fe9b44ff6b78678064f8e67f05aabd42 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-27Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "AArch64: Switch jumpserver VMs to virtio video" - AArch64: Switch jumpserver VMs to virtio video Drop vgabios dependency by switching video from VGA to virtio for all VMs spawned on the jumpserver. NOTE: This requires virtualization packages on the jumpserver to be up to date (e.g. libvirt, QEMU). JIRA: ARMBAND-306 Change-Id: I73913e1ae8584f4e73b92994f78f7ec363cba3ec Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-27Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "Add missing installation dependency" - Add missing installation dependency - uuidgen is required for installation - Add installation package for both Debian and RHEL based linux distribitions Change-Id: I9c9bf04e64dc6be1b4e8fb92aea531eccbea33a5 Signed-off-by: Taseer Ahmed <taseer94@gmail.com>
2017-10-27Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "docs: Add more info about virtual deployment" - docs: Add more info about virtual deployment Change-Id: I82f639f380092ea6800ed1e7c86a415b7979ec44 Signed-off-by: Taseer Ahmed <taseer94@gmail.com>
2017-10-26Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Run aodh state one by one Apply aodh state in consecutive order to avoid a race condition with database synchronization. Change-Id: I4684fbeaaba2c9780084e0a64fe6453bccfb67e0 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-24Update git submodulesMika Rautakumpu1-0/+0
* Update docs/submodules/fuel from branch 'master' - fix for documentation: correct git checkout tag is opnfv-5.0.2 Change-Id: I2c4192d4dc299d167ba6b1b9db91c6d73c87c417 Signed-off-by: Mika Rautakumpu <mika.rautakumpu@nokia.com>
2017-10-23Update git submodulesCristina Pauna1-0/+0
* Update docs/submodules/fuel from branch 'master' - Minor updates to documentation Change-Id: I35b8069a0239858dad3b446f683d64140964fb42 Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
2017-10-21Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Catch expected failures * neutron on computes (dpdk case: void state) * mongodb server (incomplete initialization) Change-Id: I3dd3266b5c2d1b155981f725e15742cd38ed899d Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-19Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - [vcp] Increase timeout till VCP VMs online Change-Id: I95c284cbf374194694360bffbeaf6770db6111bf Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-19Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - lib.sh: Fix locals override in nested invocations 'wait_for' bash function is nested in another 'wait_for' call in some places, which leads to inner calls interfering with outer calls by overriding the locally scoped variables, including the 'attempt' internal counter. In some cases, the outer 'wait_for' would exit after a single attempt. Fix that by running all contents of `wait_for` inside a subshell, which inherits outer calls variables, but does not override them when the inner call is finished. Change-Id: I450eda3d023af2380c61ee930071fbfc393a5645 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-19Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - [virtual] Rise memory for ovs/dpdk scenario Let's add more hugepages/memory to the compute nodes since snaps_smoke required 2Gb flavor for tests. Change-Id: If52f30d53a6469abeca67aaf2bdee551542d1653 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-19Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - [baremetal] Remove infinite loops from node checks Change-Id: I7a21c30d49aecca948f45535fec164c2f643450e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-19Update git submodulesCristina Pauna1-0/+0
* Update docs/submodules/fuel from branch 'master' - Update the reference for scenarios Modified the reference link for the scenarios as it colides with another installer. To be used with https://gerrit.opnfv.org/gerrit/#/c/45795 Change-Id: I7b55cfdb877715ec4fa0292adc11e36b7cf4ae53 Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
2017-10-19Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - [baremetal] cmp: run linux.network before reboot The recent addition of `linux.system`, combined with `system.reboot` for the baremetal compute nodes leaves compute nodes unconfigured after reboot. Run `system.network` too, but expect a failure (only for DPDK, which requires hugepages to be already active, hence a prior reboot). Fixes: 64920b8 Change-Id: I8c73b24ae15e1f87dee64ae2aba7af86db1e942f Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-19Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - [baremetal] maas state: Wait for all nodes online After MaaS reports baremetal provisioning finished successfully, check that all nodes are online before attempting a `sync_all`. Change-Id: I6ba4b3e4ba5b5258ace4da8c39e0fc77354885e3 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-18Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - [baremetal] maas state: Retry sync_all on failure Change-Id: Ib4aa3f2cb4fc7129d502b4332cd7fedd83a0e1fe Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-18Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[baremetal] PDF-based network config" - [baremetal] PDF-based network config This change extends current PDF/IDF support with: - dynamic interface / vlan definition; - dynamic interface and/or bridge allocation of installer networks on top of interfaces (physical or vlans); This allows us to drop hardcoded interface names and vlan / bridge configuration in favor of a runtime determined model based on PDF/IDF. For now, we duplicate common jinja variable definitions in each template, but this will later be moved to a common include file. JIRA: FUEL-275 Change-Id: Ia80a66dbdf898b0bd0a4fb99d069ce9ebe33fa65 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-18Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Horizon: service: Default to v2 API Horizon service definition hardcodes the API version to v3, and also overrides the value in our reclass model during interpolation. Adjust the default to '2'. While at it, move 'reclass' patching later in `salt.sh`, after the salt formula packages are installed. JIRA: FUEL-284 Change-Id: I6f63b4d00ae85c82b076b3efef857e7cc4f3fd35 Signed-off-by: Ting Wu <ting.wu@enea.com> Signed-off-by: Junaid Ali <junaidali.yahya@gmail.com> Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-18Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[virtual] Horizon: Use v2 API instead of v3" - [virtual] Horizon: Use v2 API instead of v3 JIRA: FUEL-284 Change-Id: I821a8e79e6a23a71eae0fc0f857c1d05b30cd188 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-18Update git submodulesCristina Pauna1-0/+0
* Update docs/submodules/fuel from branch 'master' - Add documentation for scenarios Added documents for feature scenarios supported by fuel. The nofeature scenarions don't require documentation. Change-Id: I574e42b60125b4a59c8d921fa45e4c4fbf09137f Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
2017-10-18Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - [baremetal] reclass: Fix class order for common Inheriting classes in the wrong order led to params being silently overriden by defaults in the system reclass classes, leaving some mismatched values between the controller nova config and the compute conunterpart (e.g. metadata_password had different values). Always inherit the common class first, so scenario-specific config is applied on top. NOTE: {dhcp,single}_nic are not used for mas|kvm|cmp nodes, but they are referenced in inherited classes, so keep them for now. Change-Id: I6cb90d5c832ffc8ab731bd9e3cd38ede858dba5c Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com> Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-16Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[baremetal] Fix DPDK by running linux.system first" - [baremetal] Fix DPDK by running linux.system first DPDK scenario requires hugepages to be set up and enabled before configuring OVS ports, so apply `linux.system` on compute nodes and reboot them before attempting to run `linux.network` state. Change-Id: I2b685361b07727a4740a3676c5f219a6443d1cf2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-16Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "salt.sh: DEBIAN_FRONTEND=noninteractive" - salt.sh: DEBIAN_FRONTEND=noninteractive Change-Id: Ibb1e78563043298dffdb4b7e9091d3f582e189fc Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-16Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[ovs/dpdk] Return true on linux.network state" - [ovs/dpdk] Return true on linux.network state linux.network state is expected to be down until node reboot to activate required hugepages therefore return true in any case. Change-Id: I61deac12b9ac212c5f79cdcce30cda8e5d24413b Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-16Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Return back glusterfs client state In order to set properly keystone fernet keys, apply glusterfs client state before second keystone server state. Also leave out user/group settings for glusterfs volume of nova instances as it will be set later by nova compute packages themselves. Change-Id: I069e37c67f08c51ed29f45cf6f92d4a00a1ac97b Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-15Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - states: Break on error, retry states up to 5 times While applying scenario states, break on error, and retry failed state up to 5 times. Apply the same behavior for `salt.sh`. Add new deploy parameter, '-D', backed up by 'CI_DEBUG' env var, which gates deploy sh scripts logging (set -x). Also extend '-f' deploy parameter, allowing it to be specified more than once; the first occurence will skip infra VM creation, but still sync reclass & other config from local repo, while a second occurence will also disable config sync. To prevent glusterfs client state from failing due to non-existent nova user/group, move it after nova:compute's nova state is applied. Change-Id: I234e126e16be0e133d878957bd88fed946955de8 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-15Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Add license headers where missing While at it, compact 'set' into bash shebang where possible and add `make patches-copyright` target to simplify adding patch license headers. Change-Id: I0c841de72e5709e5eef915a52c5ec4a7fc0f7c37 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-15Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - reclass: baremetal: Factor out common code While at it, add .yamllint file (copied from releng repo). Change-Id: I39630c0043fe2fd601510969c401e6cc9efbf69a Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-14Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Drop infinite loops in favor of finite wait_for While at it, fix some shellcheck warnings, and s/fgrep/grep -F/g. Change-Id: I093b7b4c196731b1ecc0c27a4111955b2e412762 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-14Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "states: Split virtual_control_plane from maas" - states: Split virtual_control_plane from maas We should eventually also support baremetal deploys without a virtualized control plane (VCP), so decouple MaaS provisioning from VCP provisioning. While at it, move "wait_for" bash function from maas state to common library file, lib.sh. Change-Id: I32c33135655cb6aceae901a5f92b51265a8c84b4 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-13Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - patch.sh: Exit on patch apply failure Patches that fail to apply are silently skipped. Since retrying is not possible, deploy moves on, making the problem hard to observe. Change-Id: I3fe01cef6b245de53767a660b9b4fdfae0d5d0ff Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-13Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - ci/deploy.sh: Add installation succesful message Change-Id: Id366854c4ccb3b835f4a54ddea924a3a2cc30c7d Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-12Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "docs: Update release documentation" - docs: Update release documentation JIRA: FUEL-276 Change-Id: I09799b2dde3c992d229864757e655c108d33608a Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
2017-10-12Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "docs: Update installation instructions" - docs: Update installation instructions This documentation contains the updated procedure on how to use Fuel to deploy openstack. JIRA: FUEL-276 Change-Id: I38dc9c57ea386a628cd363f5bcef3818739b9122 Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
2017-10-11Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - reclass: Fix all remaining yamllint warning Change-Id: I1e0e1ba291dd4d5af578d89274f3655ee784f64e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-11Update git submodulesGuillermo Herrero1-0/+0
* Update docs/submodules/fuel from branch 'master' - Fix parametrized nic name variables -Fix interface order for reclass config node -Interface types regruped on 3 sets for each cpu arch -Foundation VM interface names -VCP VM interface names -Baremetal node interface names Change-Id: I1ae522d775ee538b35b0f043914c80c3993232fc Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2017-10-10Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "ci/deploy.sh: Drop unsupported options" - ci/deploy.sh: Drop unsupported options Drop support for unsupported arguments: - timeout; - iso URI; While at it, disable shell debugging during PDF parsing to prevent sensitive information leaking via debug logs. Change-Id: I6b40f3e3749a3e162326728e670a176c8fa3c4bb Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-10Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - yamllint: Fix recently introduced errors Change-Id: If117588f7c43306959d29032b1d5eeb3c751dc44 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-08Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - reclass: Revert virt.nic to hardcoded eth{0,1} Salt's virtualization model for virt:nic:default does not use real interface names that are present on the node, but instead it defaults to using "ethX" notation, that name being only a convention inside Salt internals. Moreover, the 'salt.control.virt' reclass class (located in /srv/salt/reclass/classes/system/salt/control) already provides a defalt maping between "eth{0,1}" and "br{0,1}". Using anything different than "eth{0,1}" will lead to 2 extra (broken) mappings. Reverting the changes in "virt:nic" reclass fixes both the python exception recently introduced, as well as the broken defaults. Change-Id: I5c90e3d2bc181c1ad3d87af64440439e6a41fb28 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-07Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "Parametrized network config: nic device names" - Parametrized network config: nic device names Change-Id: I94d40529261f7753ec47a0c6a8c67ecc0fb15951 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2017-10-06Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Update opendaylight version to nitrogen * use pseudo agentdb port binding controller instead of the deprecated network topology one * disable superfluous l2population mechanism driver * tidy up the duplicated haproxy neutron listen opts * straighten karaf features list * update jetty config Change-Id: Ifacf8de11eb56ab72df13a312151a510b280dea2 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-06Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - [virtual] Extend cinder volume size Rally test of NovaServers.boot_server_attach_created_volume_and_live_migrate requires 10Gb volume to function, so extend volume group size in order to avoid insufficient free space error. Change-Id: I317935d2bf736db360061e24f299c9b885154a9e Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-05Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - log.sh: Fix sourcing of globals.sh Fix sourcing of globals.sh from log.sh when running with a CWD different from scripts dir. Change-Id: I680531022d30b57f650a612493f40fdb3e073dc2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-04Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "ci/deploy.sh: Move global vars to separate file" - ci/deploy.sh: Move global vars to separate file log.sh should also work as standalone script, so factor out global variables from <ci/deploy.sh> into <mcp/scripts/globals.sh>, which should be sourced by log.sh when required variables are not set. Change-Id: I5a5bb85ee5835f567d6910b11c137d95e2147714 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-04Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "Identify jump host bridges based on IDF / PDF nets" - Identify jump host bridges based on IDF / PDF nets - minor refactor of runtime templates parsing to allow var expansion; - parse <pod_config.yml> into shell vars, match dynamically networks from PDF to IP addresses on bridges of current jumphost; - keep old '-B' parameter in <ci/deploy.sh>, use it for providing fallback values in case there's no bridge name specified via IDF and no IP on the jumphost for one or more of the PDF networks; - re-enable dry-run to ease testing of the above; - add sample 'idf-pod1.yaml' to <mcp/config/labs/local>; The new behavior will try to determine the jump host bridge names: 1. Based on IDF mapping, if available 2. Based on PDF network matching with IP addrs on jumphost; 3. Fallback to values passed via '-B'; 4. Fallback to default values hardcoded in the deploy script; Later, we will drop MaaS network env vars in favor of PDF vars, once the PDF template is generating them. Change-Id: If9cd65d310c02965b2e2bfa06a0d7e0f97f1dd48 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>