summaryrefslogtreecommitdiffstats
path: root/docs/submodules/apex
AgeCommit message (Collapse)AuthorFilesLines
2018-06-01Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Merge "Configure NAT with baremetal when necessary" into stable/fraser - Configure NAT with baremetal when necessary We currently only enable NAT on undercloud for virtual deployments. However, there could be a case where a baremetal deployment also needs NAT as it is not using an interface on the overcloud nodes with external access. Therefore this patch changes the behavior to configure NAT when the gateway of either the external or admin (when external is disabled) network matches an IP assigned to the undercloud. JIRA: APEX-605 Change-Id: I9c79af371913e6e5f0d39b433f68205bc7e106c5 Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit d0f4951e914cacd99c750cb04a332cd7251b9de8)
2018-06-01Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Default ctlplane to native VLAN We were not setting any vlan type value for the admin network. This caused an issue when deploying and trying to use a single collapsed network (no net isolation). The issue occurred when trying to create an external neutron network. We happen to check if the phys type is flat or vlan using this attribute to decide what kind of phys type to use for the neutron network. JIRA: APEX-606 Change-Id: I4e24dd5e8b99cef920b8203b820a77d0021631cc Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit 42a9303a21a46f9e9b1997ab4c0beceb6b0bf438)
2018-05-30Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Merge "nosdn-fdio scenarios fixes" into stable/fraser - nosdn-fdio scenarios fixes - Set DatabaseSyncTimeout to 1800 to avoid db_sync timeout. - Add workaround for nova vif plug failure - Update vpp version - Change tap0 interface config to be on controller node only - Change networking-vpp repo back to upstream apex-tripleo-heat-templates: I14af87378b8ac7a5d10d31d2652a65d535e2ec0c apex-puppet-tripleo: Ia33234b1c6eddf787d5e4ab62c22ddc8a18b82f3 Change-Id: I843bf5b420f7994e451a01d64eacb6193df97d75 Signed-off-by: Feng Pan <fpan@redhat.com>
2018-05-30Update git submodulesRicardo Noriega1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Adding git as required dependency for Apex RPMs If it's not installed, opnfv-deploy will output an error message. JIRA: APEX-599 Change-Id: Ib826204120f53abce1f4f1e3e4ec3119a71ab650 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com> (cherry picked from commit 52557753e9cd240bc69d6b5d037a5b84e310050c)
2018-05-30Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Updates CentOS artifact links Artifacts expired from mirror links, so moving to artifacts repo. JIRA: APEX-608 Change-Id: Ib49ca355b49467e4ecfa52ba90cd5e2fad9f2d71 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-05-25Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Update Fraser 6.1 release notes Change-Id: I81b7337879260a0cfc7857608618d9149ca1db08 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-05-16Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Fixes ctlplane default route Default route was using the undercloud IP, and instead should be using the gateway set for the network in network settings. JIRA: APEX-597 Change-Id: Iff6b18a6553af98cf9da72c278f358922d489958 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-05-15Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Updates undercloud/centos repo during build phase Some dependencies are failing to install for undercloud install because the repo has expired on the frozen stable/fraser image. The kernel devel/headers packages are missing in the centos updates repo, so need to specify their location. Change-Id: I878323b01b624c452a06cf5fde40eaae196d91bd Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-04-25Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Updates documentation for Fraser release Change-Id: I19bfaa5b2778baf458df60a4a53d135e57859e04 Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit 22bc385f5b2e25694699a614268aaad2fdacbb12)
2018-04-25Update git submodulesRicardo Noriega1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Fixing os-odl-sfc scenario We need to build again OVS2.6 and apply yyang patches. apex-tripleo-heat-templates: I230b31dc9ed0ecc5046064628ba2f2505e589522 apex-puppet-tripleo: Icd433ddc6ae7de19a09f9e33b410a362c317138a Change-Id: Ia61216f6bd23ecaaa87b151452268c8ca04dc193 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-04-24Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Pull stable branches of apex dependency repos instead of master Change-Id: Ie8178d2b99e7a977a7df697c6b39ee129c508107 Signed-off-by: Feng Pan <fpan@redhat.com>
2018-04-19Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Merge "Fix nosdn fdio scenario" into stable/fraser - Fix nosdn fdio scenario - Update networking-vpp to use master branch - Update THT vpp ml2 environment file with correct parameters - Update external network creation command to use 'externa' as provider network name. - Remove vpp network settings file as it's not used apex-tripleo-heat-templates: Ia25db8456f1ad6beb96c7b9b5f318b166ef4576a apex-puppet-tripleo: I231054a433eb7e598a6e24f6eaea02d476e776de Change-Id: I4a1f68c75ae3b7d2a5b347d05abf0d025e8b116b Signed-off-by: Feng Pan <fpan@redhat.com> (cherry picked from commit 5acf4e708c68147ef20c67f8d4648e6027c1e20d)
2018-04-19Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Fixes OVN scenario The OVN scenario would not deploy due to failures in trying to upgrades to OVS 2.8 from OVS 2.7 JIRA: APEX-594. Change-Id: Id84e488da8d2335f2240930c68119d0e2f6faf9c Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit ee70c386a8560303693082f449543ad36f0f2f9c)
2018-04-18Update git submodulesRicardo Noriega1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Adding NovaMigrationTarget service Live migration fails due to this missing service in the compute role JIRA: APEX-564 Change-Id: I13d69673204f6157dcbce31507aaa132f8c4ecce Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-04-13Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Merge "Avoiding exception if guest refuses to detach a volume" into stable/fraser - Avoiding exception if guest refuses to detach a volume https://review.openstack.org/#/c/551950/ JIRA: APEX-589 Change-Id: I490f1030a32a44316e62c93cf1ed8642aef30527 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-04-12Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Enable nosdn-fdio scenarios for Fraser release - Update neutron NSDriver patch - Update os-net-config to fix config errors for vpp uio-driver - Update puppet-tripleo to add configuration of physnets and type_driver in vpp agent - Update THT to change VPP environment file for vpp-agent, and add common.yaml for vpp interface mapping - Update VPP and networking-vpp version to 18.01 - Fix networking-vpp rpm build to enable proper uninstall. - Update networking settings file to use ovs_bridge as default external interface type JIRA: APEX-578 JIRA: APEX-568 JIRA: APEX-576 JIRA: APEX-577 apex-os-net-config: I915d5455acb8d496438b9c9e851639d3a43e6fa9 apex-puppet-tripleo: I472879b8f67e64b571638a0385943597a9120e6c apex-tripleo-heat-templates: I5dfaf85d67fb038109edaf5c5d8a3e901b9148f4 Change-Id: I369bee232bfafef260d2ef19ac32614fdc487271 Signed-off-by: Feng Pan <fpan@redhat.com> (cherry picked from commit 0cd3c6cef32adb1bf9d26414ed73bd9373b0c407)
2018-04-10Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'stable/fraser' - Fix functional issues after nosdn deployment After deploying with nosdn, it looks like there is some out of state issue between the services. First guess looks like something is going on with the services and timing of registering to each other through rabbit. Simply restarting the services seems to sync them back up correctly. Change-Id: I417911067c841725ee12eb9354e5759054724e01 Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit fc3f52862e181967e861eb8bce4604ac47c176ac) - Merge "Fixes deleting security group in SNAPS for ODL scenarios" into stable/fraser - Merge "Fixes delorean repo update on undercloud" into stable/fraser - Fixes delorean repo update on undercloud Previous fix to update delorean repo on undercloud was always failing because the operations passed to virt-customize were not in a list type. JIRA: APEX-565 Change-Id: Ic883309ac1c3aa6027dc252635e404e5355c269d Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit 3812d0987d078a8a0ad93724e8188994b7579e50) - Fixes deleting security group in SNAPS for ODL scenarios Sometimes API check was failing for ODL scenarios on security group deletes. This patch backports a fix from upstream to fix the issue: https://review.openstack.org/#/c/538352/4 JIRA: APEX-586 Change-Id: I36a3547228cdcb1883140f17de7b5a713298d366 Signed-off-by: Tim Rozet <trozet@redhat.com> - Freeze overcloud/undercloud images for Fraser release Images are latest built on 3/25 Change-Id: If0d6e190ce65f0c9cac3c0056848d589db9c68dc Signed-off-by: Tim Rozet <trozet@redhat.com> - Fixes relative import for utils opnfv-pyutil was not working due to this relative import. The script would only work out of the pwd. Change-Id: I1ed5db779dd031d019012a814b2dfe27944a2e2f Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit c8f07fda6445b9b3b1fcb9d97f05cd40fffe8daf) - Fixes log location for pyutils Change-Id: I03cda65f58753fc5d55ea4ede78f7d5bd8b7bdce Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit 4d537d8b9edf67057cc28656583bbfb7dd489779) - Adds the ability to fetch logs from deployment Usage: opnfv-pyutil --fetch-logs python3 utils.py --fetch-logs --lib-dir ../lib Eventually all utils.sh functions will be migrated here. Note there is no support here for containers. Will be added later. Change-Id: I223b8592ad09e0370e287ee2801072db31f9aa12 Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit 382fa452e0c9a8189911f615416e1b24badaf5e4)
2018-04-09Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Fix functional issues after nosdn deployment" - Fix functional issues after nosdn deployment After deploying with nosdn, it looks like there is some out of state issue between the services. First guess looks like something is going on with the services and timing of registering to each other through rabbit. Simply restarting the services seems to sync them back up correctly. Change-Id: I417911067c841725ee12eb9354e5759054724e01 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-04-06Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Fixes delorean repo update on undercloud Previous fix to update delorean repo on undercloud was always failing because the operations passed to virt-customize were not in a list type. JIRA: APEX-565 Change-Id: Ic883309ac1c3aa6027dc252635e404e5355c269d Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-04-06Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Fixes relative import for utils opnfv-pyutil was not working due to this relative import. The script would only work out of the pwd. Change-Id: I1ed5db779dd031d019012a814b2dfe27944a2e2f Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-04-05Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Fixes log location for pyutils Change-Id: I03cda65f58753fc5d55ea4ede78f7d5bd8b7bdce Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-04-05Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Adds the ability to fetch logs from deployment Usage: opnfv-pyutil --fetch-logs python3 utils.py --fetch-logs --lib-dir ../lib Eventually all utils.sh functions will be migrated here. Note there is no support here for containers. Will be added later. Change-Id: I223b8592ad09e0370e287ee2801072db31f9aa12 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-03-28Update git submodulesRicardo Noriega1-0/+0
* Update docs/submodules/apex from branch 'master' - Generalization of recursive function Now, SDN_MAP is not needed to have a boolean true value, but it will check internally posible value formats such dicts and tuples. Change-Id: Idaf492952a7dd9e48e16f42dcbf5c59d981dd535 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-03-17Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Enables containerized overcloud deployments Changes Include: - For upstream deployments, Docker local registry will be updated with latest current RDO containers, regular deployments will use latest stable - Upstream container images will then be patched/modified and then re-uploaded into local docker registry with 'apex' tag - Deployment command modified to deploy with containers - Adds a --no-fetch deployment argument to disable pulling latest from upstream, and instead using what already exists in cache - Moves Undercloud NAT setup to just after undercloud is installed. This provides internet during overcloud install which is now required for upstream container deployments. - Creates loop device for Ceph deployment when no device is provided in deploy settings (for container deployment only) - Updates NIC J2 template to use the new format in OOO since the os-apply-config method is now deprecated in > Queens JIRA: APEX-566 JIRA: APEX-549 Change-Id: I0652c194c059b915a942ac7401936e8f5c69d1fa Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-03-16Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Adding SRIOV scenario" - Adding SRIOV scenario This scenario should enable SRIOV interfaces to be used by Neutron. Only will be supported in baremetal deployments with SRIOV capable NICs. The name of the interface must be known in advance and the physnet of the SRIOV network is set as nfv_sriov. Change-Id: Ie4295413e0be2197bd9ada4f887f6b47cd486765 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-03-13Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Enabling extra bridge for native external network" - Enabling extra bridge for native external network If you have a non-vlan external network in a separate interface, you will need to create an extra bridge to hook up the interface. This patch will allow the user to create: - br-isolated: for all the vlan networks - br-ex: for the native external network JIRA: APEX-572 Change-Id: Ie76e2345ce75c77f2925c47451427ae41b6957d1 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-03-13Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Adds OS_REGION_NAME into overcloudrc files" - Adds OS_REGION_NAME into overcloudrc files Although this is not required to be able to access overcloud, it is required by some tests in Functest. JIRA: APEX-570 Change-Id: I45deaa8061f1be44ce80eed4810537eaf6841803 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-03-12Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Cherry-pick of L2GW environment file" - Cherry-pick of L2GW environment file It includes ODL L3 service plugin and trunk ports apex-tripleo-heat-templates: I37039207bc7cf9965d26e6dfa034e84bf9b7224d Change-Id: I29c398aabf9a2d1b98f76895ed73c01dcc008c19 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-03-10Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Fixes ceph key import failures" - Fixes ceph key import failures There is an issue with HA deployments where sometimes key imports fail for Ceph which seem to occur around 50% of the time. When logging in after a failure, the key import seems to work which indicates it may be a race condition. In addition, sometimes the keyring that is created is missing the "caps" section of the file, which will also fail import. This patch adds a retries for a minute to try to import the key. It also moves creating/importing to the same Exec because there is evidence that the file is being modified by some other process right after the file content is created in the previous exec. JIRA: APEX-563 Change-Id: Ie8cfeb4803f6bed95f9e612eeb37c5cdf2d76617 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-03-08Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Fix URL anchor in apex document." - Fix URL anchor in apex document. The latest OPNFV document template makes html file separately, hence index.html#<something> is invalid. This fix changes anchor URL to support separate file. Change-Id: Ic48c062e118d2faede53e8c9eaecbb99e58fddfb Signed-off-by: Tomofumi Hayashi <tohayash@redhat.com>
2018-03-07Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Adding libguestfs-tools as dependency" - Adding libguestfs-tools as dependency Needed for virt-customize the images Change-Id: Ide3fff2c6b850047add6eeed4082c518c36e6e74 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-02-23Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "barometer: fix barometer apex build" - barometer: fix barometer apex build apex-tripleo-heat-templates: I3250b57316b4ec85e0558f1b512f6f3ed7c349fb apex-puppet-tripleo: I95698d69c58e0c36ae88cc2687073a05b514592c Change-Id: I5f33cd2a2842051a77c89cb11f97e8e37d1d0185 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2018-02-22Update git submodulesDan Radez1-0/+0
* Update docs/submodules/apex from branch 'master' - Typo fix for disabling ipxe JIRA: APEX-535 Change-Id: If1d074d01246407b322d5a4bc27dfde35349e9db Signed-off-by: Dan Radez <dradez@redhat.com>
2018-02-16Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Fixes ensuring VBMCs are actually running" - Fixes ensuring VBMCs are actually running We currently start VBMCs using CLI due to issues with the VBMC python lib. However when we start them, there is no check to make sure they are actually changed to 'running' status. This patch adds logic to check (up to 5 times) to ensure each VBMC is running or raises an error. Note this is for virtual deployments only. JIRA: APEX-527 Change-Id: Iab7ee3b76292d6fc547f18c83f23c04205e9bb2e Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-02-16Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Fixes stale undercloud delorean repos" - Fixes stale undercloud delorean repos When we build artifacts for release, we try to freeze the disk images and artifacts we use for deployment. This includes the delorean repo which provides OpenStack packages. This repo however expires after a couple months and then if any packages were missing in the Undercloud released artifact, they will attempt to be downloaded during install and fail. This patch adds some logic to detect if there is internet connectivity, and if so then download and update the delorean repo on the undercloud. JIRA: APEX-565 Change-Id: I58c28437fb5c5b179033c939377fd97aefbf427c Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-02-16Update git submodulesDan Radez1-0/+0
* Update docs/submodules/apex from branch 'master' - Add http(s)_proxy handling to apex JIRA: APEX-512 Change-Id: I875bd99203b425e448e7a3f64eb9a8f99d03ddaf Signed-off-by: Dan Radez <dradez@redhat.com>
2018-02-16Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Ensures v4/v6 iptables filters are loaded We configure host iptables to open different ports for VBMC. This may fail if the iptables filters are not loaded. JIRA: APEX-521 Change-Id: Ia33032c29aba3555551e39b4f819087aeafe05d9 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-02-15Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Fixes python2 docutils req and also installs ansible For some reason we were requiring python2-docutils in to build our rpm instead of python34-docutils. Patch also includes some logic to install ansible. JIRA: APEX-515 Change-Id: I1b85e5b4b29f74f5ff5399296f24831c334c289c Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-02-13Update git submodulesFeng Pan1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Adds barbican service to deployment" - Adds barbican service to deployment This service is required for creating encrypted volumes for storage. JIRA: APEX-531 Change-Id: Ied5ea1d6921ef96c1a352dba523d6f37245608e2 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-02-13Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Adds openstack-utils to overcloud Package allows user to do openstack-status to see state of services. JIRA: APEX-352 Change-Id: Ie68cad5745786c8764ae20c2d3ad26dd05e5480b Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-02-09Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Adding L2GW Scenario" - Adding L2GW Scenario This scenario allows you to install L2GW Neutron driver and point to OpenDaylight as service provider. apex-tripleo-heat-templates: I37039207bc7cf9965d26e6dfa034e84bf9b7224d Change-Id: I0dfd37bcc5060f0ad8caa95e1f87a7411bd6e723 Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
2018-02-08Update git submodulesDan Radez1-0/+0
* Update docs/submodules/apex from branch 'master' - Allow disabling ipxe for provisioning JIRA: APEX-535 Change-Id: I52d17e962fc4a504db1ddbc20df0ac56a208f34b Signed-off-by: Dan Radez <dradez@redhat.com>
2018-02-07Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Fixes missing CephClientKey generation In newer OOO deployments, the keys for ceph are dynamically generated. Also removes tacker client patch for symmetrical as it is already present in stable/pike: https://github.com/openstack/python-tackerclient/commit/682c9651085214a58434ad6016d93b2cdc8f3462 JIRA: APEX-563 Change-Id: I01fb617b026bae5d6e265a4afbac270939627c5a Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-02-01Update git submodulesDan Radez1-0/+0
* Update docs/submodules/apex from branch 'master' - wrapping up deploy items for aarch Change-Id: Ib5f4715d851dc91be6a57fcb5d18a0557a7b0c7f Signed-off-by: Dan Radez <dradez@redhat.com>
2018-01-29Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Make introspection optional" - Make introspection optional - exposes new option to end users to skip introspection - moves the logic to decide to introspect or not into python JIRA: APEX-536 Change-Id: Ieaff11362ff8f906daa98d301d3d473ad549d08f Signed-off-by: Dan Radez <dradez@redhat.com>
2018-01-19Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Enables trunk ports with bgpvpn scenario This is enabled in regular ODL deployments but is missing from the bgpvpn scenario. Trunk ports are requested by SDNVPN team for testing with bgpvpn. apex-tripleo-heat-templates: I1b4d3eea61e29e1ede0e06d78fde842ef13b7b8e Change-Id: I00a36b56045fa1114d8407fe5005128c46ecefb4 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-01-15Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Fixes including default SDN env file in deploy cmd" - Fixes including default SDN env file in deploy cmd The latest method to deploy opendaylight features upstream is to include the default SDN file and then add-on the feature env file which should override any default settings in the previous SDN env file. For example for bgpvpn: openstack overcloud deploy -e <tht_dir>/neutron-opendaylight.yaml -e \ <tht_dir>/neutron-bgpvpn-opendaylight.yaml This change documents the recursive function used to find the SDN env files and includes the default for the SDN controller. JIRA: APEX-555 Change-Id: I4270932ca4fbc21ea54e965d9d6491424f4463e2 Signed-off-by: Tim Rozet <trozet@redhat.com>
2018-01-11Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "barometer: move to opnfv puppet repo" - barometer: move to opnfv puppet repo The barometer puppet scripts have been moved to the barometer repo. This change migrates the Apex builds to using the barometer repo. Change-Id: I064c40746d19e5deb305c503128b357479b7149c Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2018-01-09Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Disable gpgcheck on the kubernetes repo JIRA: APEX-560 Change-Id: I0c8da2e841f175a1724b81d73fdf08c706408b9b Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-12-21Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Updates OpenDaylight BGPVPN driver" - Updates OpenDaylight BGPVPN driver apex-tripleo-heat-templates: Ib94b0182fd5fbc3a254cae5862a82982bf3131be Change-Id: Ie1e73edce9027056fb2e2870ee4705bf69251e11 Signed-off-by: tomsou <soth@intracom-telecom.com>