summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-02-01Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Add tempest and rally in functest-features SDNVPN also requires these packages. It would be refactored in a second step when xtesting is published. Change-Id: I069ecf8d60dc0ee1a755d0974913b686f4c7ae61 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-02-01Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Turn off Retpoline and KPTI protection Based on Canonical research (https://goo.gl/QJykMa) there is low-risk of attack for private clouds environments, therefore turn off the related kernel patches & regain performance back. Change-Id: I661fa127241e327b07d21a29d58d584997607123 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-02-01Update git submodulesmei mei1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "[Compass4nfv] collect the logs and upload to artifact" - [Compass4nfv] collect the logs and upload to artifact JIRA: COMPASS-579 Add a job to collect log and upload. what the job do 1. run collect-log.sh to get log from rsyslog container 2. copy log.tar.gz from compass-tasks to jumphost 3. upload the log.tar.gz to artifact Change-Id: Ic2244e33e7ae4b7aa71e15af741191c850982053 Signed-off-by: wutianwei <wutianwei1@huawei.com>
2018-02-01Update git submodulesXuan Jia1-0/+0
* Update docs/submodules/container4nfv from branch 'master' - Merge "documentation for kubernetes data plane with dpdk acceration on Arm64 platform" - documentation for kubernetes data plane with dpdk acceration on Arm64 platform Change-Id: Id32d9a49777280972dcb37b447ffc7e24a4aadfa Signed-off-by: Bin Lu <bin.lu@arm.com>
2018-01-31Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "adding pike support during installation." - adding pike support during installation. Change-Id: I31a1f6d1de5796c82bcf7e001451ec3ca0d3b1ce Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>
2018-01-31Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "deploy kubernetes in XCI" - deploy kubernetes in XCI This commit introduces kubespray into XCI. k8s install currently assumes k8s install and OpenStack install cannot coexist. If XCI_INSTALLER is set to "kubespray" and DEPLOY_SCENARIO is set to "k8-nosdn-nofeature" the xci-deploy.sh would install kubernetes instead of OpenStack. The version of kubernetes is beta release v1.9.0 currently according to the master of kubespray it only support the ubuntu now. Opensuse and centos still need to develop and test. This patch create the directory xci/installer/kubespray, the related files of kubespray would be placed to it. The xci/installer/$installer/playbooks/configure-localhost.yml was moved to xci/playbooks/configure-localhost.yml as a common yaml file. You can modify some parameters according your need in xci/installer/kubespray/files/k8s-cluster.yml to deploy cluster. When deploying kubernetes, it would download the kubespray to releng-xci/.cache/repos/kubespray. If your flavor is Ha, it will download haproxy_server and keepalived to xci/playbook/roles, which setup haproxy service for kubernetes. Change-Id: I24d521a735d7ee85fbe5af8c4def65f37586b843 Signed-off-by: wutianwei <wutianwei1@huawei.com>
2018-01-31Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Modify fuel_baremetal pod config file" - Modify fuel_baremetal pod config file The current HA testcases failed on fuel baremetal installer with reason "SSHTimeout". This is due to incorrect ssh login info in the pod config file. The change is to by running 'prepare_env.sh' script to - read env vars 'USER_NAME' and 'SSH_KEY' - replace the 'node_username' to env var 'USER_NAME' - replace the "node_keyfile" to env var 'SSH_KEY' JIRA: ARMBAND-317 Change-Id: I0239892f447ae99ab4025eedcd133e1b6f04e5a5 Signed-off-by: ting wu <ting.wu@enea.com>
2018-01-31Update git submodulesMytnyk, Volodymyr1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Add sample OpenStack/SRIOV RFC2544 based TC Add sample OpenStack/SRIOV RFC2544 based test case which can be run using external Trex. Console log: http://paste.openstack.org/show/658002/ Result output: http://paste.openstack.org/show/658004/ JIRA: YARDSTICK-967 Change-Id: Id0e2d6d47f459c7e6a3370735bab74f7ce502b24 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-01-31Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/armband from branch 'master' - u/fuel: Bump & rebase for reclass update Change-Id: I094243a4678cd3a458b39961ac5e28f65c85b09a Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-31Update git submodulesSteven Pisarski1-0/+0
* Update docs/submodules/snaps from branch 'master' - Merge "Changed invalid gateway IP to ensure fails with all OS configurations." - Changed invalid gateway IP to ensure fails with all OS configurations. Change-Id: I35374ea5fa79974c43c2a474e43ff275b26dfc02 Signed-off-by: spisarski <s.pisarski@cablelabs.com>
2018-01-31Update git submodulesSteven Pisarski1-0/+0
* Update docs/submodules/snaps from branch 'master' - Merge "Changed the way floating IPs are getting assigned to VMs as the previous means was not compatible with python-novaclient==10.0.0" - Changed the way floating IPs are getting assigned to VMs as the previous means was not compatible with python-novaclient==10.0.0 JIRA: SNAPS-258 Change-Id: I56f7a8341c81e0ae5596f67d4d15ef6c26e0e680 Signed-off-by: spisarski <s.pisarski@cablelabs.com>
2018-01-31Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/sfc from branch 'master' - Test the deletion of chain This is the flow of the test: 1 - Create a vnffg in tacker (i.e. chain + classifier) 2 - Remove the vnffg 3 - Check that the RSPs are removed from operation DB in ODL and the classifier rules are not present in the flows 4 - Create a new vnffg 5 - Test the new chain: 5.1 - Check HTTP traffic works 5.2 - Block HTTP traffic in VNF and check that it does not work anymore Change-Id: Ia077e58c5cbce4258a2f8a36f6b961eb923ff9c5 Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-01-31Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/sfc from branch 'master' - Use the new vnf image for Fraser Change-Id: I11c37ed6898c03b2a54a0e3b11422c654023333f Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-01-31Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/sfc from branch 'master' - Adapt change in functest The variable TEST_DB_URL must be read as a env. variable since this patch": https://gerrit.opnfv.org/gerrit/#/c/49757/ Change-Id: I8f77acbbb2fe949f5fbe8a3f983c49224d893bcc Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-01-31Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Removal of deprecated SNAPS-OO classes in juju_epc" - Removal of deprecated SNAPS-OO classes in juju_epc It completes the first commit about that topic [1]. [1] https://gerrit.opnfv.org/gerrit/#/c/47617/ Change-Id: I1a55b45f0535ae98681546d4d24bb424cf892aa8 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-01-31Update git submodulesBin Lu1-0/+0
* Update docs/submodules/container4nfv from branch 'master' - documentation for sriov cni with pf mode Change-Id: I0015acdbed7cb1b544c673b080cc8b78c875e355 Signed-off-by: Bin Lu <bin.lu@arm.com>
2018-01-31Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Fix pylint errors/warnings in rally" - Fix pylint errors/warnings in rally JIRA: FUNCTEST-906 Change-Id: I484f9a291d5adbedb855450e4ff067dfa4a3b2ae Signed-off-by: Juha Kosonen <juha.kosonen@nokia.com>
2018-01-31Update git submodulesSridhar K. N. Rao1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - collector: Support for collectd as one of the collectors. The changes include: 1. Configuration in 05_collector.conf. User can specify the metrics that are of their interest and also fine tune the same. 2. collectd_bucky.py: This is derived from python_bucky library. Formal approval for reuse is obtained. 3. collectd.py: This is the main file that receives the samples, stores the required ones, plots the values and saves the values in a data-file in results folder. 4. Fixed some pylint errors 5. Added required libraries to requirements.txt. hashlib is supported by default. However, matplotlib and numpy required 6. added __init__.py to overcome import errors. 7. Crypto needs pycrypto module 8. Builtin filter function usage return bad-builtin pylint warning. Rewrite to remove filter function. 9. Added support for reporting the ovs processes statistics. 10. Import order corrected according to pylint 11. Fixed copyright issues, removed python-3 checking, enhance to include VPP and qemu processes. 12. Removed pylint disables. 13. Added documentaion to describe sample information 14. Added @staticmethod to remove disable-no-self-use. 15. Fixed year in Copyright. 16. Updated print_results function to print the process values. 17. Removed example values form INTELRDT_XKEYS in conf file 18. Removed use of len(SEQUENCE) in loop and renamed data to pdata to avoid name clashes 19. Fixed issue with requirements.txt Note: A separate documentation covering all external tools will be provided. JIRA: VSPERF-505 Change-Id: Ieedcbe7b92e8933263d34df12b1e24be8447b524 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2018-01-31Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[patch] Group APT calls for salt formula install" - [patch] Group APT calls for salt formula install When installing salt-formula-* on cfg01, we used to call APT for each package. Instead, handle them all at once. While at it, stop using colored output on terminals that don't support it (e.g. 'vt220' used by OPNFV Jenkins). Change-Id: Ib8f2cee9638c43cdf648487bf05b07cd49802d3e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-31Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[VCP] Catch 'no response' when adding ssh auth key" - [VCP] Catch 'no response' when adding ssh auth key On rare occassions, one or more minions might fail to respond in due time, so catch 'no reponse' using `wait_for`. Change-Id: I8e6b0dc44a39e79c2874ff9a657e152620ba3f13 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-31Update git submodulesJuha Kosonen1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "proper instance status handling" - proper instance status handling This would fix the exception happening in the SDNVPN CI testsuite. Example: http://artifacts.opnfv.org/logs/functest/lf-pod1/2018-01-21_17-18-06/bgpvpn.log Change-Id: Ie22dcdbba5299177d4e98e5995433553df5bfa68 Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>
2018-01-31Update git submodulesYifei Xue1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Merge "Collect log from rsyslog container" - Collect log from rsyslog container JIRA: COMPASS-579 the script collect-log.sh would be called by releng, after all the deploy and tests job are complete. Change-Id: Ic2604ca0650989bc13310377427694ededf75a9d Signed-off-by: wutianwei <wutianwei1@huawei.com>
2018-01-30Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/pharos from branch 'master' - Merge changes from topics 'fuel-netmap', 'fix-check-jinja' * changes: [fuel] Add net_map.j2 for net config abstraction [fuel] Explicitly blacklist incompatible labs [IDF] Add optional 'idf.installer' array - [fuel] Add net_map.j2 for net config abstraction This will be leveraged by other j2 templates in Fuel to construct scenario-specific network config files. Change-Id: Iba1fd99b23936fe42abe16af3cd80dce2a63d997 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com> - [fuel] Explicitly blacklist incompatible labs Previously, we used to silently refuse to construct 'pod_config' for PODs missing mandatory PDF/IDF configuration; and instead generated an empty output YAML. Retire safety checks in Fuel IA and explicitly blacklist Fuel via new 'idf.installer' where appropiate. The following PODs do not yet support Fuel due to missing 'idf.fuel': - ericsson-pod2 - huawei-pod1 - intel-pod18 - nokia-pod1 - zte-pod2 - zte-pod3 Change-Id: Ief62d62f99a79187303e3f15b83030289e5efdcb Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com> - [IDF] Add optional 'idf.installer' array There is no easy way to determine automatically if a PDF/IDF set is compatible with a specific installer adapter. Most common incompatibilities are caused by: - installer adapters hardcode more network ports than nodes have defined in PDF; - installer adapters hardcode more nodes than PDF defines; Previous attempt at handling this dynamically (cd54edf) fails for recently added PODs, so let's handle this explicitly per-pod via a new optional IDF property, 'idf.installer'. If 'idf.installer' is defined, it will be used by `check-jinja2.sh` as a filter-in list of installer adapters to check against. The default (no 'idf.installer' present) is to check all IAs. Leverage the new property for: - arm-pod5: not enough network ports on computes for Compass, Joid; - arm-pod7: same as arm-pod5; - bii-pod1: no 'storage' network defined in IDF for Daisy; - zte-pod9: 3 cluster nodes are only supported by Daisy for now; SPEC changes: - net_config (previously mandatory for IDF version '0.1') is now mandatory only if 'idf.fuel' or 'idf.daisy' is defined; Fixes: cd54edf Change-Id: I706c05519e5491ad631069d7cc090e9c8bfd3011 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-30Update git submodulesspisarski1-0/+0
* Update docs/submodules/snaps from branch 'master' - Changed network and keypair naming to be dynamic Change-Id: I227433e92fc7f42924fa9404ff3c394c79500a1b Signed-off-by: spisarski <s.pisarski@cablelabs.com>
2018-01-30Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Remove duplicated code related to snaps creds" - Remove duplicated code related to snaps creds Add support for providing credentials in snaps_utils. JIRA: FUNCTEST-916 Change-Id: I3e027229d213d3791a115920f7012309cc027712 Signed-off-by: Juha Kosonen <juha.kosonen@nokia.com>
2018-01-30Update git submodulesGeorg Kunz1-0/+0
* Update docs/submodules/snaps from branch 'master' - Avoid checking Keystone v3 domains when using API v2.0 Introducing a version check to avoid checking keystone domains, which are an auth API v3 feature, when only auth API v2.0 is being used. Change-Id: I220c6637e5f65124e5dbe7d5246490c3986b7a66 Signed-off-by: Georg Kunz <georg.kunz@ericsson.com>
2018-01-30Update git submodulesRuan HE1-0/+0
* Update docs/submodules/moon from branch 'master' - Merge "adding some comments to enahnce" - adding some comments to enahnce removing comments and add todo point Signed-off-by: sgdt6900 <rhanafy.ext@orange.com> Change-Id: I38f21bd7557fb758b50d561a06efe8ea09ca07fc
2018-01-30Update git submodulesLinda Wang1-0/+0
* Update docs/submodules/functest from branch 'master' - Fix pylint errors about refstack JIRA: FUNCTEST-907 Change-Id: Ib08a88523c700d35894b9b89b7585425a02065c3 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-01-30Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - Update reclass system model Get the latest reclass system model to be in sync with salt formulas code. Adjust keystone v3 admin endpoint patch. Change-Id: Ia7ce6187b875cc9e18af2784ef1eb5df1c145c7d Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-30Update git submodulesYifei Xue1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Add tacker support in compass4nfv for Fraser JIRA: COMPASS-577 1. Add tacker service into haproxy configuration file 2. Include tacker installation into setup-openstack.yml Change-Id: I5a91766e034ec55af711029aac4ba9ed4a388db2 Signed-off-by: Yifei Xue <xueyifei@huawei.com>
2018-01-30Update git submodulesmei mei1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "Pull the image before running functest container" - Pull the image before running functest container Change-Id: Iebd8a9b558486927c25735d266d3557f91e26a15 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-01-30Update git submodulesYifei Xue1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Merge "Change gnocchi storage and increase the capacity of ceph" - Change gnocchi storage and increase the capacity of ceph 1. Change the gnocchi storage to ceph. 2. Change the size of loopback to 500GB 3. Change the ceilometer polling yaml 4. Run ceilometer-upgrade command and restart ceilometer service Change-Id: I8948c7b7e340c11e5d05c06a7d54c0e1b807620c Signed-off-by: wutianwei <wutianwei1@huawei.com>
2018-01-30Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/armband from branch 'master' - u/fuel: Bump & rebase for ODL fix after Pike mv Upstream changed salt-formula-neutron to have custom, dedicated configuration for Pike, silently breaking our ODL support. Change-Id: Iaccfed65132699ca7d0c0bb5eee5c2ca13b1ce28 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-29Update git submodulesRodolfo Alonso Hernandez1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Add Intel Fortville 40G VF driver to sample VNF image" - Add Intel Fortville 40G VF driver to sample VNF image 1) Add common YAML config file to add kernel drivers to sample VNF image. 2) Add Intel Fortville 40G VF driverto sample VNF image using common YAML config file for drivers. 3) Configure i40evf driver to load on boot JIRA: YARDSTICK-968 Change-Id: I223c8a10d77352baf4f41a481f465970655ba251 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-01-29Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Change CivetWeb download URL" - Change CivetWeb download URL Changed CivetWeb download URL to [1]. [1] https://iweb.dl.sourceforge.net/project/civetweb/1.9.1/CivetWeb_V1.9.1.zip JIRA: YARDSTICK-920 Change-Id: Ida014a57bd5b87d26c6cb8f5d36d43060f08026d Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-01-29Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Fix up tests for Parser scenario" - Fix up tests for Parser scenario * Check the results at the test methods * Remove print statement from Parser scenario * Replace assertEquals(x, True) with assertTrue(x) Change-Id: I5c2612692e625fc888c7ce7637b9e1625440724a Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-01-29Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Move tests: unit/cmd/" - Move tests: unit/cmd/ * Fix pylint errors * Add TODOs Some errors are ignored locally, as they were a symptom of other problems. These issues have been flagged with a TODO, and should be fixed later. Change-Id: I505d72e1c646fea1976a0bf854369c6b6308bbb1 Jira: YARDSTICK-837 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-01-29Update git submodulesTim Rozet1-0/+0
* Update docs/submodules/apex from branch 'master' - Merge "Make introspection optional" - Make introspection optional - exposes new option to end users to skip introspection - moves the logic to decide to introspect or not into python JIRA: APEX-536 Change-Id: Ieaff11362ff8f906daa98d301d3d473ad549d08f Signed-off-by: Dan Radez <dradez@redhat.com>
2018-01-29Update git submodulesMichael Polenchuk1-0/+0
* Update docs/submodules/fuel from branch 'master' - [patch] Point neutron opendaylight configs to pike Change-Id: I3fae38da88b170b84ea926abf93da8b178e9ca8a Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-29Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/sfc from branch 'master' - Fix problem to fetch the compute name of client VM When migrating to SNAPs a bug was introduced and could be seen in logs as: Error when waiting for classification rules: 'module' object has no attribute 'get_compute_client' The cause is that get_compute_client is not a global function anymore but a method inside a class. Besides, due to SNAPs, we need to fetch the compute name in another way Change-Id: I32007c83894281ba9514a121b7939b5bfe52f4bc Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-01-29Update git submodulesManuel Buil1-0/+0
* Update docs/submodules/sfc from branch 'master' - Fix cleanup function A floating ip remains when executing the clean up function. That floating ip belongs to the Tacker VNF and thus we should add that creator to the list Change-Id: Ic15574bf93f30a26f81a4944d742307dda4bfe6d Signed-off-by: Manuel Buil <mbuil@suse.com>
2018-01-29Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/pharos from branch 'master' - Merge "[fuel] Update IA for vPDF support" - [fuel] Update IA for vPDF support - move gtw tenant addrs from {6,7,9} to {124,125,126} (e.g. 10.0.1.6 -> 10.0.1.124 for ericsson-virtual* PODs); - add gtw external (public) addresses, e.g. 10.16.0.124; - add ctl external (public) addresses, e.g. 10.16.0.11; JIRA: FUEL-322 Change-Id: Ice73aa3985831dca7427e496850d0865db71477e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-29Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "deploy.sh: Retire `-B` argument" - deploy.sh: Retire `-B` argument All bridge information should be defined via IDF. Keeping `-B` support in deploy.sh only creates confusion. While at it, remove automatic bridge detection based on network addr. Change-Id: Id8b54e4887a97092daed5beb31fde4edd13057f1 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-29Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - Merge "[FN VMs] remove graphics" - [FN VMs] remove graphics Since VCP VMs (created via salt formula) do not have a video controller defined in their domain XMLs, network devices end on different PCI slots and hence have different names assigned (ens2+ vs foundation node VMs, which start with ens3). To align network interface names for VMs on jumpserver vs kvm nodes, and reduce confusion, remove the video controller from FN VMs. This allows some cleanup: - drop extra AArch64 args from virt-install; - unify 'opnfv_vcp_vm_*' and 'opnfv_fn_vm_*' variables; Change-Id: I0d108b00914b3eaaa03b67c652174f8ed4573118 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-29Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Create subnet and net within the same project" - Create subnet and net within the same project It is required to create a network and subnet within the same project for some SUTs. Change-Id: Icd02edb0aebee93713f315cdbbeb021e9ae82dae Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-01-29Update git submodulesAric Gardner1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "[fuel] Retire 'BRIDGE' slave param" - [fuel] Retire 'BRIDGE' slave param Only Danube still uses this param, newer branches rely on IDF. Going forward, the `-B` deploy arg will be deprecated in Fuel. Do not yet remove BRIDGE slave params from non-CI PODs, as other installers (or custom Danube jobs?) might still use them. Change-Id: I6d259299d1e13e8a5da732aca60b1f56b8472af6 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-29Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/releng from branch 'master' - [fuel] Retire 'virtual_kvm' override Now that vPDF support landed in Pharos and Fuel repos, disable the 'virtual_kvm' generic override, so we can load POD-specific PDF/IDF. JIRA: FUEL-322 Change-Id: I0964220a25d6fe30afcbeb3ad1f020ae76d38e5a Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-29Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Enable epc unit tests" - Enable epc unit tests It adds the missing __init__.py to activate vepc unit tests. They are disabled because they are currently false (otherwise it would block next changes). Change-Id: I65b32490efde4cc8f6b3d9e6ee19257dcf02c2dd Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-01-29Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Fix warnings in all snaps-related modules" - Fix warnings in all snaps-related modules It also adds vping/__init__.py to stop skipping vping unit tests. It removes the useless import os which is not required for mock (here the mock patch was simply false). It should be noted that the code is partially duplicated between snaps_test_runner.py and vping_base_base.py. A small part of code has been rewritten to fix that without multi inheritance. Change-Id: I2e3e181ad7dab8aa41afb1e63d0b6795ff0d1610 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-01-29Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Fix pylint errors in several utils modules" - Fix pylint errors in several utils modules All utils which are moving to xtesting are now fixed. It remains OpenStack and Functest utils (+ the related unit tests) which doesn't move to the new package. Change-Id: If13c627c8444c62d5c6bf9c8057d6413aa0e56c7 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>