summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-04-23Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - remove more old apexlake testcases fix fraser failures Change-Id: I8bb12a762054a4c3274cc6e0297e948b92700e7e Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-04-23Update git submodulesSteven Pisarski1-0/+0
* Update docs/submodules/snaps from branch 'master' - Merge "Fix NoneType error when creating router" - Fix NoneType error when creating router Change-Id: Icef5f8a769b5c33da68b7da33ac8ba87132830e2 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-04-23Update git submodulesspisarski1-0/+0
* Update docs/submodules/snaps from branch 'master' - Addressed issue with test when replicated networks are configured on the pod. According to the defect, "neutron OVS agent uses a replicated network for DVR." JIRA: SNAPS-305 Change-Id: I3ceb94582d74a297f5ff41520ffe4e9f5e638266 Signed-off-by: spisarski <s.pisarski@cablelabs.com>
2018-04-23Update git submodulesahothan1-0/+0
* Update docs/submodules/nfvbench from branch 'master' - [NFVBENCH-87] In case of asymmetric actual Tx rate, total drops is calculated incorrectly Use far end TX counter to calculate dropped packets at given RX port. Change-Id: Icfffb390e2e557f0bad2e9ddf685510decc25b27 Signed-off-by: ahothan <ahothan@cisco.com>
2018-04-23Update git submodulesRodolfo Alonso Hernandez1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "[docs] Updated baremetal instalation instructions" - [docs] Updated baremetal instalation instructions JIRA: YARDSTICK-1111 Change-Id: Iefab24f74c87a0855c2d70090ac34256ffa9200c Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
2018-04-23Merge "Update OPNFV Sphinx Theme"Sofia Wallin11-20/+23
2018-04-23Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: install-lib: Make sure pip is upgraded first" - xci: install-lib: Make sure pip is upgraded first We need to make sure that pip is the first thing we upgrade in the virtual environment because old pip releases do not support the '-c' option which we use to install the rest of the required components. Change-Id: I8b3ec080617324bfefbec2a6cdfa6ef58afb7c20 Signed-off-by: Markos Chandras <mchandras@suse.de>
2018-04-23Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Update graphs in userguide" - Update graphs in userguide 1. Functest structural concept 2. Clearwater architecture Change-Id: I88e39d6d08f1eb28a389d2b8a7a1669295f6aa49 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-04-23Update git submodulesAsteroide1-0/+0
* Update docs/submodules/moon from branch 'master' - Merge "Fix a bug occuring only in Jenkins" - Fix a bug occuring only in Jenkins Change-Id: I2ba0c6e435e62450f9da57846ca05aeddf73f4d0
2018-04-23Update git submodulesTomi Juvonen1-0/+0
* Update docs/submodules/doctor from branch 'master' - Merge "Release note for Fraser" - Release note for Fraser Change-Id: I22db79ca21c9812b8ab5ef88e9e6aa51b5f6ce05 Signed-off-by: Tomi Juvonen <tomi.juvonen@nokia.com>
2018-04-23Update git submodulesGerald Kunzmann1-0/+0
* Update docs/submodules/doctor from branch 'master' - Merge "Updated Doctor feature configuration doc" - Updated Doctor feature configuration doc Change-Id: I1217439d46be7659fa372451c2bc686e8c2030f0 Signed-off-by: Bertrand Souville <souville@docomolab-euro.com>
2018-04-23Update git submodulesdongwenjuan1-0/+0
* Update docs/submodules/doctor from branch 'master' - bugfix: certificate for https for MCP in baremetal In Mcp baremetal env, doctor test is always failed because of ssl certificate for https. Change-Id: Ia443c6463fe177ff4e1ab5a86429750fbd23740c Signed-off-by: dongwenjuan <dong.wenjuan@zte.com.cn>
2018-04-23Update git submodulesJuha Kosonen1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Fix tier/testcases list" - Fix tier/testcases list Change-Id: I15da2df4905efbca4415739fd7c6391b51168c82 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-04-23Update git submodulesBin Hu1-0/+0
* Update docs/submodules/ipv6 from branch 'master' - Final Release Notes 6.0.0. Ready Change-Id: I188faadc70ed54090f9202974498e3a74effde35 Signed-off-by: Bin Hu <bh526r@att.com>
2018-04-22Update git submodulesRodolfo Alonso Hernandez1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "MessagingConsumer accepts messages from multiple producers" - MessagingConsumer accepts messages from multiple producers The messaging consumer now can store a list of PID of several producers. The notification handler can compare the procedence of a message from a list of PID. JIRA: YARDSTICK-1074 Change-Id: I193f83c2b471e5bf1298ac728be52533aded0c1a Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-04-22Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/armband from branch 'master' - u/fuel: Bump & rebase for tenant NIC fix Change-Id: I318b3541add33d50e47f8acba56b7ad58357e105 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-04-22Update git submodulesAlexandru Avadanii1-0/+0
* Update docs/submodules/fuel from branch 'master' - [ha] Fix tenant NIC OS config for VLAN ranges Previous commits added support for tenant VLAN range parametrization, yet failed to accomodate the new VLAN range representation ('M:N') in existing `linux.network.interfaces` reclass configuration. This lead to the silent removal of <nic_private>.<vlan_private> from interfaces file and for `br-mesh` to try to use <nic_private> instead of <nic_private>.<vlan_private>, conflicting with `br-floating`. Stick to using the first VLAN in the tenant range. JIRA: FUEL-365 Change-Id: I88f7263159f1742dba3b6e36649c9344f2932c5f Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-04-21Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Bypass NoneType errors when creating router in rally It converts private subnet name to str as it's mandary till [1]. It could be reverted as soon as [2] is merged in snaps. [1] https://gerrit.opnfv.org/gerrit/#/c/56091/ [2] https://gerrit.opnfv.org/gerrit/#/c/56171/ Change-Id: Ia728415207f8ecb5b5ac55982f82337c45671c4c Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-04-21Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Bypass NoneType errors when creating router It converts private subnet name to str as it's mandary till [1]. It could be reverted as soon as [2] is merged in snaps. [1] https://gerrit.opnfv.org/gerrit/#/c/56091/ [2] https://gerrit.opnfv.org/gerrit/#/c/56171/ Change-Id: I849944fa9d4d2be21fe1a37b76c4cfd231b6d56f Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-04-21Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Add timeouts in juju_epc juju_epc still hangs if OpenStack isn't well deployed [1]. As releng doesn't publish logs if the job is aborted, timeout has to be added mostly everywhere. [1] https://build.opnfv.org/ci/view/functest/job/functest-apex-baremetal-daily-fraser/31/console Change-Id: I0296cd811bda0234aab98f184b3ab247a5b32017 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-04-21Update git submodulesxudan1-0/+0
* Update docs/submodules/dovetail from branch 'master' - Switch to OPNFV Fraser release 1. Use Functest Fraser docker images whose tag is fraser 2. Use Yardstick stable docker images 3. Functest fraser has moved testcases.yaml file from functest/ci to xtesting/ci 4. Functest fraser has removed 'functest env prepare' command 5. Functest uses rally to execute osinterop test cases instead of refstack_client Change-Id: I81ebefe6ea959ca77c2c87f1d75ef56ac18c165f Signed-off-by: xudan <xudan16@huawei.com>
2018-04-21Update git submodulesRodolfo Alonso Hernandez1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "Improve "Libvirt.create_snapshot_qemu" function" - Improve "Libvirt.create_snapshot_qemu" function Improved "Libvirt.create_snapshot_qemu" function: - Check if the base image is present in the remote host. If not, try to copy from the execution host. - Check the execution status. In case the command fails, raise an exception. JIRA: YARDSTICK-944 Change-Id: I78bd0d3ed6a1f35ed772c0d192bb240009a580ed Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-04-20Update git submodulesagardner1-0/+0
* Update docs/submodules/releng from branch 'master' - Cleanup Archived projects Removing archived projects from jjb These project dont need any jobs associated with them escalator fastpathmetrics inspector lsoapi movie multisite octopus openretriever prediction Change-Id: Ibbe49e54ed326f502157c7892022b7a62173b72d Signed-off-by: agardner <agardner@linuxfoundation.org>
2018-04-20Update OPNFV Sphinx ThemeTrevor Bramwell11-20/+23
When the theme was initially created I was under the assumption the directory the theme lives under needs to match the name. This does not seem to be the case and in fact seems to cause issues with correctly importing and using the theme. Includes formatting updates to the README and linting. Change-Id: I67c834bfe9dc99252159394ecbf136d9a264e0a8 Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
2018-04-20Update git submodulesrpaik1-0/+0
* Update docs/submodules/daisy from branch 'master' - Made minir edits for the Fraser release Change-Id: Ic19e2c270067497a777231ec47a6dd94f94c2b99 Signed-off-by: rpaik <rpaik@linuxfoundation.org>
2018-04-20Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "extra loopback cleanup" - extra loopback cleanup try to cleanup in the shell script in case ansible errors maybe it is hopeless because of docker JIRA: YARDSTICK-1096 JIRA: YARDSTICK-1054 Change-Id: I759ded4731a7710a194a81530cfb35376eb7800d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-04-20Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - disable NSB (DPDK) image load for ARM we skip the building now but we also need to skip the image loading JIRA: YARDSTICK-1124 Change-Id: I27c40d6319e74374282203132cfc2c7ebff9b094 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-04-20Update git submodulesspisarski1-0/+0
* Update docs/submodules/snaps from branch 'master' - Fixed bug with regards to subnet lookups. Neutron returns all subnets regardless of visibility which cause problems within routers if there is another subnet with the same name attached to a different network. JIRA: SNAPS-304 In addition, this patch contains two other minor fixes. launch_utils.py - raise an exception when the creator is not properly instantiated network.py - allow fixed IPs to be none. Change-Id: Ib343074d925be4592a713727a03d5b531890eada Signed-off-by: spisarski <s.pisarski@cablelabs.com>
2018-04-20Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Update version in setup.cfg (Gambia)" - Update version in setup.cfg (Gambia) Change-Id: I81ad97a441a050ed9469e178dac8e9dc57c5e72d Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-04-20Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Last Release updates before tag (master)" - Last Release updates before tag (master) Change-Id: Icbe6943d574ab5878833fb0cfbc8cd05c65756d6 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-04-20Update git submodulesLinda Wang1-0/+0
* Update docs/submodules/functest from branch 'master' - Update configguide JIRA: FUNCTEST-959 Change-Id: Id75689154a63b7258d753f26bb5ff01c0b06012e Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-04-20Update git submodulesCédric Ollivier1-0/+0
* Update docs/submodules/sdnvpn from branch 'master' - Fix version in setup.cfg It cannot be installed due the new branch. Change-Id: I1898190cbf522dbfbaeaa89e3d65a7b2e27fb2cc Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-04-20Update git submodulesFatih Degirmenci1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Pin os-odl-bgpvpn to project internal tag 6.0.0 It is important to test and pin the versions tagged by the projects to ensure we have a single version of XCI with pinned versions of the scenarios for all the projects are recorded. Same exercise will be done for all the scenarios and then scenarios will be unpinned from the tags to let the development continue. deploy-scenario:os-odl-bgpvpn installer-type:osa Change-Id: I9350bc53fa87836ad36259b259edf506dd99790a Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
2018-04-20Update git submodulesCharalampos Kominos1-0/+0
* Update docs/submodules/armband from branch 'master' - [p/openstack.nova] force creation of pty on aarch64 Allow nova to create a pty device for aarch64VM JIRA: ARMBAND-352 Change-Id: I7d481957342a0dfb5be38a01b3d755862321cfa7 Signed-off-by: Charalampos Kominos <charalampos.kominos@enea.com>
2018-04-20Update git submodulesAsteroide1-0/+0
* Update docs/submodules/moon from branch 'master' - Merge "Testing pipeline in Jenkins" - Testing pipeline in Jenkins Change-Id: Ibd898f2cefd1194e0604d243d155b6ffcab760ab
2018-04-20Update git submodulesPeriyasamy Palanisamy1-0/+0
* Update docs/submodules/sdnvpn from branch 'master' - Make sdnvpn logging proper * Currently no log messages are getting written into log file due to file handler is registered for logger object created at different modules. Now corresponding handler is registered for logger objects. * Making sdnvpn Feature class to use its parent class logger object to avoid unnecessary logger object creation. Change-Id: I4ec61951ba4ac39cecc137dbb818da72f0b43b35 Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>
2018-04-20Update git submodulesAbhijit Sinha1-0/+0
* Update docs/submodules/yardstick from branch 'master' - Merge "DPDK: detect dpdk_make_arch based on image arch" - DPDK: detect dpdk_make_arch based on image arch JIRA: YARDSTICK-1124 Change-Id: I26e5854f5117a3b45ac7fa4d4b06f325dcd4d97a Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-04-20Update git submodulesMartin Klozik1-0/+0
* Update docs/submodules/vswitchperf from branch 'master' - Merge "scapy: Load default SCAPY protocols" - scapy: Load default SCAPY protocols After the fix of SCAPY library import, it was not possible to use some of the network protocols by T-Rex. T-Rex 2.38 uses by default SCAPY 2.3.1 for python3, but it overrides the default set of network protocols loaded by layers/all.py. VSPERF makefile was modified to restore original version of all.py from SCAPY 2.3.1 git repository. Also examples of scapy usage were updated to generate correct traffic with modified scapy version. JIRA: VSPERF-566 Change-Id: Ib9ae3c572e693e86d30eb0467ab9c812fe8f335b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-04-20Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Update test results in userguide" - Update test results in userguide JIRA: FUNCTEST-958 Change-Id: I45fcdac6c645e52db9d664b7bd96319bbac49a63 Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-04-20Update git submodulesCedric Ollivier1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Update log config for Restapi" - Update log config for Restapi Change-Id: I3117489d489fe7e948c81f62ccfd04a13351780a Signed-off-by: Linda Wang <wangwulin@huawei.com>
2018-04-20Update git submodulesMarkos Chandras1-0/+0
* Update docs/submodules/releng-xci from branch 'master' - Merge "xci: lib-install: Clear XCI_CACHE prior to downloading openstack-ansible-tests" - xci: lib-install: Clear XCI_CACHE prior to downloading openstack-ansible-tests If we don't clear the cache, the script errors out with the following: fatal: destination path '/root/releng-xci/.cache/repos/openstack-ansible-tests' already exists and is not an empty directory Change-Id: I22111ed655a4c6790f808155968deb2fd3828e41 Signed-off-by: Taseer Ahmed <taseer94@gmail.com>
2018-04-20Update git submodulesJuha Kosonen1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Fix image paths in cloudify_ims_perf.yaml" - Fix image paths in cloudify_ims_perf.yaml Change-Id: If58b5f2021df8a0de672a30459b5b0b12f3fcef2 Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
2018-04-20Update git submodulesJuha Kosonen1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Add Kubernetes test details to functest userguide" - Add Kubernetes test details to functest userguide Change-Id: I032bfe5f079c185d6217800b4a4d16e94c29b05c Signed-off-by: Konrad Djimeli <konraddjimeli@gmail.com>
2018-04-20Update git submodulesJuha Kosonen1-0/+0
* Update docs/submodules/functest from branch 'master' - Merge "Add Kubernetes test results to functest userguide" - Add Kubernetes test results to functest userguide Change-Id: I8b9d7a449ea3b123993c6619b368a4afb0dd2e3e Signed-off-by: Konrad Djimeli <konraddjimeli@gmail.com>
2018-04-20Update git submodulesSerena Feng1-0/+0
* Update docs/submodules/releng from branch 'master' - Merge "pass value to parameters" - pass value to parameters Change-Id: Ia1130cbdd7fc11127b54d2f8d5ff952f5e293ac0 Signed-off-by: dongwenjuan <dong.wenjuan@zte.com.cn>
2018-04-20Update git submodulesRoss Brattain1-0/+0
* Update docs/submodules/yardstick from branch 'master' - disable DPDK images for ARM We are trying to compile DPDK for the os-nosdn-ovs-ha scenario because we added TC042  "Measure network latency using testpmd and pktgen-dpdk". However it looks like TC042 is only enabled for compass in opnfv_os-nosdn-kvm_ovs_dpdk-ha https://gerrit.opnfv.org/gerrit/#/c/54659/1/tests/opnfv/test_suites/opnfv_os-nosdn-kvm_ovs_dpdk-ha_daily.yaml - file_name: opnfv_yardstick_tc042.yaml constraint: installer: compass pod: huawei-pod1 We don't actually need TC042 and DPDK or os-nosdn-ovs-ha. But in order to run TC042 we have to know beforehand that we are going to use DPDK, so we have a conditional in the load_images.sh script that tries to guess when we will need a DPDK image. The conditional only checks for *[_-]ovs[_-]* if [[ $DEPLOY_SCENARIO == *[_-]ovs[_-]* ]]; then ansible-playbook \ -e img_property="nsb" \ -e YARD_IMG_ARCH=${YARD_IMG_ARCH} \ -vvv -i inventory.ini build_yardstick_image.yml if [ ! -f "${QCOW_NSB_IMAGE}" ]; then echo "Failed building QCOW NSB image" exit 1 fi fi For this release we won't be able to get DPDK images to compile on ARM, we should fix this conditional and not try to compile. Also change the shell glob to match *[_-]ovs_dpdk[_-]* to only enable DPDK images for ovs_dpdk scenarios JIRA: YARDSTICK-1124 Change-Id: I03142e6b8aa00dc9cdf9b446868fb723cd10198b Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-04-20Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Add support for reception of jumbo frames" - Add support for reception of jumbo frames Jumbo frames are now supported through the addition of a "mtu" parameter of the port in the config file. Setting the mtu to a value higher than 1500 bytes will enable the reception of jumbo frames. In addition, the rte_eth_dev_set_mtu is now set for all pmds. Finally, setting mbuf_size does not set MEMPOOL_F_NO_SPREAD anymore. This option was only used for pure debugging. Big packets can be received using two ways - Using multiple "small" mbufs, i.e. around 2K. This is the default. - Using one big mbuf holding the whole packet. This can be enabled by setting a parameter mbuf_size in the receiving core configuration Change-Id: Idd60ad31f41c89f9522dff4d894af2696b7a2ea1 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-20Update git submodulesDeepak S1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Merge "Support async operation in handle_esp" - Support async operation in handle_esp Change-Id: Ibee77e31c0eb7a0e14e7aa0df092a278dfe75d6b Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-20Update git submodulesXavier Simonart1-0/+0
* Update docs/submodules/samplevnf from branch 'master' - Fix link speed when link is down at startup. When link is down at startup, the link_speed returned by DPDK is 0. This results in un-optimized latency estimates in gen and lat. With this fix, lat and gen do nothing until link_speed is properly initialized, and use the right link speed in the fast path. Change-Id: Id2d14b6966ccfac7cc78db3c5a74e704b42edae7 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-04-20Update git submodulesHarry Huang1-0/+0
* Update docs/submodules/compass4nfv from branch 'master' - Add option to choose deploy tool JIRA: COMPASS-596 There may be different kinds of deploy tools that be supported in future release of compass. Using option DEPLOY_TOOL to choose a deploy tool thus specify which compass-tasks will be brought up Change-Id: I92b69ebad412e70ccd28ef864fb485e485705dc9 Signed-off-by: Harry Huang <huangxiangyu5@huawei.com>