summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/templates/installation-instructions.rst219
-rw-r--r--docs/templates/release-notes.rst48
2 files changed, 241 insertions, 26 deletions
diff --git a/docs/templates/installation-instructions.rst b/docs/templates/installation-instructions.rst
new file mode 100644
index 000000000..388907ea6
--- /dev/null
+++ b/docs/templates/installation-instructions.rst
@@ -0,0 +1,219 @@
+:Authors: Jonas Bjurel (Ericsson)
+:Version: 0.1
+
+================================================================
+OPNFV Installation instructions for - < Component denomination >
+================================================================
+
+Abstract
+========
+
+This document describes how to install <Component>, it's dependencies and required system resources.
+
+License
+=======
+<WORK'S NAME> (c) by <AUTHOR'S NAME>
+
+<WORK'S NAME> is licensed under a Creative Commons Attribution 4.0 Unported License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+
+
+**Contents**
+
+1 Version history
+
+2 Introduction
+
+3 Preface
+
+4 Hardware requirements
+
+5 Top of the rack (TOR) Configuration requirements
+
+6 OPNFV Software installation and deployment
+
+7 Installation health-check
+
+8 Post installation and deployment actions
+
+9 References
+
+1 Version history
+===================
+
++--------------------+--------------------+--------------------+--------------------+
+| **Date** | **Ver.** | **Author** | **Comment** |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| 2015-04-14 | 0.1.0 | Jonas Bjurel | First draft |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| | 0.1.1 | | |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| | 1.0 | | |
+| | | | |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+
+2 Introduction
+================
+<INTRODUCTION TO THE SCOPE AND INTENTION OF THIS DOCUMENT AS WELL AS TO THE SYSTEM TO BE INSTALLED>
+
+<EXAMPLE>:
+
+This document describes the supported software and hardware configurations for the Fuel OPNFV reference platform as well as providing guidelines on how to install and
+configure such reference system.
+
+Although the available installation options gives a high degree of freedom in how the system is set-up, with what architecture, services and features, etc., not nearly all of those permutations provides a OPNFV compliant reference architecture. Following the guidelines in this document ensures
+a result that is OPNFV compliant.
+
+The audience of this document is assumed to have good knowledge in network and Unix/Linux administration.
+
+3 Preface
+===========
+<DESCRIBE NEEDED PREREQUISITES, PLANNING, ETC.>
+
+<EXAMPLE>:
+
+Before starting the installation of Fuel@OPNFV, some planning must preceed.
+
+First of all, the Fuel@OPNFV .iso image needs to be retrieved, the Latest stable Arno release of Fuel@OPNFV can be found here: <www.opnfv.org/abc/def>
+
+Alternatively, you may build the .iso from source by cloning the opnfv/genesis git repository:
+<git clone https://<linux foundation uid>@gerrit.opnf.org/gerrit/genesis>
+Check-out the Arno release:
+<cd genesis; git checkout arno>
+Goto the fuel directory and build the .iso
+<cd fuel/build; make all>
+
+Familiarize yourself with the Fuel 6.0.1 version by reading the following documents:
+- abc <http://wiki.openstack.org/abc>
+- def <http://wiki.openstack.org/def>
+- ghi <http://wiki.openstack.org/ghi>
+
+Secondly, a number of deployment specific parameters must be collected, those are:
+
+1. Provider sub-net and gateway information
+
+2. Provider VLAN information
+
+3. Provider DNS addresses
+
+4. Provider NTP addresses
+
+This information will be needed for the configuration procedures provided in this document.
+
+4 Hardware requirements
+=========================
+<PROVIDE A LIST OF MINIMUM HARDWARE REQUIREMENTS NEEDED FOR THE INSTALL>
+
+<EXAMPLE>:
+
+Following minimum hardware requirements must be met for installation of Fuel@OPNFV:
+
++--------------------+----------------------------------------------------+
+| **HW Aspect** | **Requirement** |
+| | |
++--------------------+----------------------------------------------------+
+| **# of servers** | Minimum 5 (3 for non redundant deployment) |
+| | 1 Fuel deployment master (may be virtualized) |
+| | 3(1) Controllers |
+| | 1 Compute |
++--------------------+----------------------------------------------------+
+| **CPU** | Minimum 1 socket x86_AMD64 Ivy bridge 1.6 GHz |
+| | |
++--------------------+----------------------------------------------------+
+| **RAM** | Minimum 16GB/server (Depending on VNF work load) |
+| | |
++--------------------+----------------------------------------------------+
+| **Disk** | Minimum 256GB 10kRPM spinning disks |
+| | |
++--------------------+----------------------------------------------------+
+| **NICs** | 2(1)x10GE Niantec for Private/Public (Redundant) |
+| | |
+| | 2(1)x10GE Niantec for SAN (Redundant) |
+| | |
+| | 2(1)x1GE for admin (PXE) and control (RabitMQ,etc) |
+| | |
++--------------------+----------------------------------------------------+
+
+5 Top of the rack (TOR) Configuration requirements
+====================================================
+<DESCRIBE NEEDED NETWORK TOPOLOGY SETUP IN THE TORs>
+
+<EXAMPLE>:
+
+The switching infrastructure provides connectivity for the OPNFV infra-structure operations as well as for the tenant networks (East/West) and provider connectivity (North/South bound connectivity). The switching connectivity can (but does not need to) be fully redundant, in case it and comprises a redundant 10GE switch pair for “Traffic/Payload/SAN” purposes as well as a 1GE switch pair for “infrastructure control-, management and administration”
+
+The switches are **not** automatically configured from the OPNFV reference platform. All the networks involved in the OPNFV infra-structure as well as the provider networks and the private tenant VLANs needs to be manually configured.
+
+This following sections guides through required black-box switch configurations.
+
+5.1 VLAN considerations and blue-print
+--------------------------------------
+
+5.2 IP Address plan considerations and blue-print
+-------------------------------------------------
+
+6 OPNFV Software installation and deployment
+==============================================
+<DESCRIBE THE FULL PROCEDURES FOR THE INSTALLATION OF THE OPNFV COMPONENT INSTALLATION AND DEPLOYMENT>
+
+<EXAMPLE>:
+
+This section describes the installation of the Fuel@OPNFV installation server (Fuel master) as well as the deployment of the full OPNFV reference platform stack across a server cluster.
+Etc.
+
+6.1 Install Fuel master
+-----------------------
+
+6.2 Create an OPNV (Fuel Environment)
+-------------------------------------
+
+6.3 Configure the OPNFV environment
+-----------------------------------
+
+6.4 Deploy the OPNFV environment
+--------------------------------
+
+7 Installation health-check
+============================
+<DESCRIBE ANY MEANS TO DO VERIFY THE INTEGRITY AND HEALTHYNESS OF THE INSTALL>
+
+<EXAMPLE>:
+
+Now that the OPNFV environment has been created, and before the post installation configurations is started, perform a system health check from the Fuel GUI:
+
+- Select the “Health check” TAB.
+- Select all test-cases
+- And click “Run tests”
+
+All test cases except the following should pass:
+
+8 Post installation and deployment actions
+============================================
+<DESCRIBE ANY POST INSTALLATION ACTIONS/CONFIGURATIONS NEEDED>
+
+<EXAMPLE>:
+After the OPNFV deployment is completed, the following manual changes needs to be performed in order for the system to work according OPNFV standards.
+
+**Change host OS password:**
+Change the Host OS password by......
+
+9 References
+=============
+<PROVIDE NEEDED/USEFUL REFERENCES>
+
+<EXAMPLES>:
+
+9.1 OPNFV
+-------------
+
+9.2 OpenStack
+-----------------
+
+9.3 OpenDaylight
+--------------------
+
+9.4 Fuel
+------------ \ No newline at end of file
diff --git a/docs/templates/release-notes.rst b/docs/templates/release-notes.rst
index 56a1ade13..d6b21cbeb 100644
--- a/docs/templates/release-notes.rst
+++ b/docs/templates/release-notes.rst
@@ -1,18 +1,16 @@
-:Authors:
- Jonas Bjurel (Ericsson)
- :Version: 0.1
+:Authors: Jonas Bjurel (Ericsson)
+:Version: 0.1
-==================================================================
-Release Note for OPNFV "Arno release" - < Component denomination >
-==================================================================
+======================================================================
+OPNFV Release Note for "Arno-SRx release" - < Component denomination >
+======================================================================
Abstract
========
-This document describes delivery revision information from the CEE 15A
-project.
+This document provides the release notes for <RELEASE> of <COMPONENT>.
-Licence
+License
=======
<WORK'S NAME> (c) by <AUTHOR'S NAME>
@@ -42,7 +40,7 @@ Licence
| **Date** | **Ver.** | **Author** | **Comment** |
| | | | |
+--------------------+--------------------+--------------------+--------------------+
-| 2015-04-14 | 0.1.0 | UABJONB | First draft |
+| 2015-04-14 | 0.1.0 | Jonas Bjurel | First draft |
| | | | |
+--------------------+--------------------+--------------------+--------------------+
| | 0.1.1 | | |
@@ -50,13 +48,12 @@ Licence
+--------------------+--------------------+--------------------+--------------------+
| | 1.0 | | |
| | | | |
-| | | | |
+--------------------+--------------------+--------------------+--------------------+
2 Important notes
===================
-<STATE IMPORTANT NOTES/DEVIATIONS SINCE PREVIOUS ITTERATIVE RELEASE AND OTHER IMPORTANT NOTES FOR THIS RELEASE>
+<STATE IMPORTANT NOTES/DEVIATIONS SINCE PREVIOUS ITERATIVE RELEASE AND OTHER IMPORTANT NOTES FOR THIS RELEASE>
<EXAMPLE>:
@@ -69,11 +66,11 @@ Licence
<EXAMPLE>:
-Arno Fuel@OPNFV is based the OpenStack Fuel upstrem project version 6.0.1, but adds OPNFV unique components such as OpenDaylight version: Helium as well as other OPNFV unique configurations......
+Arno Fuel@OPNFV is based the OpenStack Fuel upstream project version 6.0.1, but adds OPNFV unique components such as OpenDaylight version: Helium as well as other OPNFV unique configurations......
4 Release Data
================
-<STATE RELEVANT RELEASE DATA/RECCORDS>
+<STATE RELEVANT RELEASE DATA/RECORDS>
<EXAMPLE>:
@@ -81,7 +78,7 @@ Arno Fuel@OPNFV is based the OpenStack Fuel upstrem project version 6.0.1, but a
| **Project** | E.g. Arno/genesis/fuel@opnfv |
| | |
+--------------------------------------+--------------------------------------+
-| **Repo/commitID** | E.g. genesis/adf634a0d4..... |
+| **Repo/commit-ID** | E.g. genesis/adf634a0d4..... |
| | |
+--------------------------------------+--------------------------------------+
| **Release designation** | E.g. Arno RC2 |
@@ -113,8 +110,7 @@ Arno Fuel@OPNFV is based the OpenStack Fuel upstrem project version 6.0.1, but a
<EXAMPLE>:
-- The Fuel@OPNFV installation guide version has cheanged from version 0.1 to to 0.2
-
+- The Fuel@OPNFV installation guide version has changed from version 0.1 to to 0.2
4.2 Reason for version
----------------------
@@ -130,10 +126,10 @@ Arno Fuel@OPNFV is based the OpenStack Fuel upstrem project version 6.0.1, but a
| **JIRA REFERENCE** | **SLOGAN** |
| | |
+--------------------------------------+--------------------------------------+
-| BGS-123 | ADD OpenDaylight ML2 integration |
+| BGS-123 | ADD OpenDaylight ml2 integration |
| | |
+--------------------------------------+--------------------------------------+
-| BGS-456 | Add autodeployment of Fuel@OPNFV |
+| BGS-456 | Add auto-deployment of Fuel@OPNFV |
| | |
+--------------------------------------+--------------------------------------+
@@ -153,21 +149,20 @@ Arno Fuel@OPNFV is based the OpenStack Fuel upstrem project version 6.0.1, but a
| | |
+--------------------------------------+--------------------------------------+
-
4.3 Deliverables
----------------
4.3.1 Software deliverables
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-<STATE WHAT SOFTWARE DELIVERABLES THAT ARE RELATED TO THIS VERSION, AND WHERE THOSE CAN BE RETREIVED>
+<STATE WHAT SOFTWARE DELIVERABLES THAT ARE RELATED TO THIS VERSION, AND WHERE THOSE CAN BE RETRIEVED>
<EXAMPLE>:
4.3.2 Documentation deliverables
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-<STATE WHAT DOCUMENTATION DELIVERABLES THAT ARE RELATED TO THIS VERSION, AND WHERE THOSE CAN BE RETREIVED>
+<STATE WHAT DOCUMENTATION DELIVERABLES THAT ARE RELATED TO THIS VERSION, AND WHERE THOSE CAN BE RETRIEVED>
<EXAMPLE>:
@@ -176,7 +171,7 @@ Arno Fuel@OPNFV is based the OpenStack Fuel upstrem project version 6.0.1, but a
5.1 System Limitations
-------------------------
-<STATE ALL RELLEVANT SYSTEM LIMITATIONS>
+<STATE ALL RELEVANT SYSTEM LIMITATIONS>
<EXAMPLE>:
@@ -186,7 +181,7 @@ Arno Fuel@OPNFV is based the OpenStack Fuel upstrem project version 6.0.1, but a
**Storage:** Ceph is the only supported storage configuration.
-**Max number of networks:** 3800 (Needs special switch config)
+**Max number of networks:** 3800 (Needs special switch config.)
**L3Agent:** L3 agent and floating IPs is not supported.
@@ -239,7 +234,7 @@ Fuel@OPNFV Arno RC2 has undergone QA test runs with the following results:
| | |
| | 2. Heat deploy.... |
+--------------------------------------+--------------------------------------+
-| Robot sest suite 456 | Following tests failed: |
+| Robot test suite 456 | Following tests failed: |
| | |
| | 1....... |
| | |
@@ -253,4 +248,5 @@ Fuel@OPNFV Arno RC2 has undergone QA test runs with the following results:
<EXAMPLE>:
For more information on the OPNFV Arno release, please see:
-http://wiki.opnfv.org/release/arno \ No newline at end of file
+
+http://wiki.opnfv.org/release/arno