summaryrefslogtreecommitdiffstats
path: root/docs/templates
diff options
context:
space:
mode:
Diffstat (limited to 'docs/templates')
-rw-r--r--docs/templates/LICENSE.rst43
-rw-r--r--docs/templates/build-instructions.rst207
-rw-r--r--docs/templates/index.rst38
-rw-r--r--docs/templates/installation-instructions.rst239
-rw-r--r--docs/templates/release-notes.rst261
5 files changed, 0 insertions, 788 deletions
diff --git a/docs/templates/LICENSE.rst b/docs/templates/LICENSE.rst
deleted file mode 100644
index ed7a4a22b..000000000
--- a/docs/templates/LICENSE.rst
+++ /dev/null
@@ -1,43 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-Copyright 2015 Open Platform for NFV Project, Inc. and its contributors
-
-Open Platform for NFV Project Software Licence
-==============================================
-Any software developed by the "Open Platform for NFV" Project is licenced under the
-Apache License, Version 2.0 (the "License");
-you may not use the content of this software bundle except in compliance with the License.
-You may obtain a copy of the License at <http://www.apache.org/licenses/LICENSE-2.0>
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-
-Open Platform for NFV Project Documentation Licence
-===================================================
-Any documentation developed by the "Open Platform for NFV Project"
-is licensed under a Creative Commons Attribution 4.0 International License.
-You should have received a copy of the license along with this. If not,
-see <http://creativecommons.org/licenses/by/4.0/>.
-
-Unless required by applicable law or agreed to in writing, documentation
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-
-Other applicable upstream project Licenses relevant for <Component>
-===================================================================
-You may not use the content of this software bundle except in compliance with the
-Licenses as listed below:
-+----------------+----------------------------+
-| **Component** | **Licence** |
-+----------------+----------------------------+
-| OpenStack | Apache License 2.0 |
-+----------------+----------------------------+
-| OpenDaylight | Eclipse Public License 1.0 |
-+----------------+----------------------------+
-| ++ | |
-+----------------+----------------------------+
diff --git a/docs/templates/build-instructions.rst b/docs/templates/build-instructions.rst
deleted file mode 100644
index 3c7a9b8f1..000000000
--- a/docs/templates/build-instructions.rst
+++ /dev/null
@@ -1,207 +0,0 @@
-:Authors: Jonas Bjurel (Ericsson)
-:Version: 0.1
-
-================================================================
-OPNFV Build instructions for - < Component denomination >
-================================================================
-
-Abstract
-========
-
-This document describes how to build <Component>, build system dependencies and required system resources.
-
-License
-=======
-<WORK'S NAME> (c) by <AUTHOR'S NAME>
-
-<WORK'S NAME> is licensed under a Creative Commons Attribution 4.0 International License.
-You should have received a copy of the license along with this.
-If not, see <http://creativecommons.org/licenses/by/4.0/>.
-
-
-**Contents**
-
-1 Version history
-
-2 Introduction
-
-3 Requirements
-
-4 Building
-
-5 Artifacts
-
-
-1 Version history
-===================
-
-+--------------------+--------------------+--------------------+--------------------+
-| **Date** | **Ver.** | **Author** | **Comment** |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| 2015-04-14 | 0.1.0 | Jonas Bjurel | First draft |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| | 0.1.1 | | |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| | 1.0 | | |
-| | | | |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-
-2 Introduction
-================
-<INTRODUCTION TO THE SCOPE AND INTENTION OF THIS DOCUMENT>
-
-<EXAMPLE>:
-
-This document describes build system used to build Fuel@OPNFV,
-required dependencies and minimum requirements on the host to be used for the buildsystem.
-
-The Fuel build system is desigened around Docker containers such that dependencies
-outside of the build system can be kept to a minimum.
-It also shields the host from any potential dangerous operations performed by the build system.
-
-The audience of this document is assumed to have good knowledge in network and Unix/Linux administration.
-
-3 Requirements
-================
-<PROVIDE A LIST OF MINIMUM HARDWARE AND SOFTWARE REQUIREMENTS FOR THE BUILD>
-
-3.1 Minimum Hardware Requirements
----------------------------------
-<EXAMPLE>:
-
-- An x86_64 host (Bare-metal or VM) with Ubuntu 14.04 LTS installed
-
-- ~30 GB available disc
-
-- 4 GB RAM
-
-3.2 Minimum Software Requirements
----------------------------------
-<EXAMPLE>:
-The build host should run Ubuntu 14.04 operating system.
-
-On the host, the following packages must be installed:
-
-- docker - see https://docs.docker.com/installation/ubuntulinux/ for installation notes for Ubuntu 14.04.
- Note: only use the Ubuntu stock distro of Docker (docker.io)
-
-- git (simply available through sudo apt-get install git)
-
-- make (simply available through sudo apt-get install make)
-
-- curl (simply available through sudo apt-get install curl)
-
-3.3 Preparations
-----------------
-<EXAMPLE>:
-
-3.3.1 Setting up the Docker build container
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-After having installed Docker, add yourself to the docker group:
-
-<usermod -a -G docker [userid]>
-
-Also make sure to define relevant DNS servers part of the global dns chain in
-in your </etc/default/docker> configuration file, eg.
-
-<DOCKER_OPTS=" --dns=8.8.8.8 --dns=8.8.8.4">
-
-Then restart docker:
-
-<sudo service docker.io restart>
-
-3.3.2 Setting up OPNFV Gerrit in order to being able to clone the code
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- Start setting up OPNFV gerrit by creating a SSH key (unless you don't already have one),
- create one with ssh-keygen
-
-- Add your generated public key in OPNFV Gerrit <https://gerrit.opnfv.org/>
- (this requires a linuxfoundation account, create one if you do not already have one)
-
-- Select "SSH Public Keys" to the left and then "Add Key" and paste your public key in.
-
-3.3.3 Clone the OPNFV code git repository
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Now it is time to clone the code repository:
-
-<git clone ssh://Linux foundation user@gerrit.opnfv.org:29418/genesis>
-
-Now you should have the OPNFV genesis repository with Fuel@OPNFV stored locally on your build host.
-
-4 Building
-============
-<DESCRIBE THE FULL PROCEDURES FOR THE BUILD OF THE OPNFV COMPONENT ARTIFACTS>
-
-<EXAMPLE>:
-
-There are two methods available for building Fuel@OPNFV:
-
-- A low level method using Make
-
-- An abstracted method using build.sh
-
-4.1 Configure your build environment
--------------------------------------
-
-Select the versions of the components you want to build by editing the fuel/build/config.mk file.
-Note if you want to build with OpenDaylight SDN controller you need to uncomment the lines starting
-with odl-main and java-main
-
-4.2 Low level build method using make
---------------------------------------
-
-The low level method is based on Make:
-
-From the <fuel/build directory> invoke <make [target]>
-
-Following targets exist:
-
-- none/all - this will:
-
- - If not allready existing, initialize the docker build environment
-
- - If not already done, build OpenDaylight from upstream (as defined by fuel-build config-spec)
-
- - If not already done, build fuel from upstream (as defined by fuel-build/config-spec)
-
- - Build the defined additions to fuel (as defined by the structure of this framework)
-
- - Apply changes and patches to fuel (as defined by the structure of this framework)
-
- - Reconstruct a fuel .iso image
-
-- clean - this will remove all artifacts from earlier builds.
-
-If the build is successful, you will find the generated ISO file in the <fuel/build/release> subdirectory!
-
-4.3 Abstracted build method using build.sh
-===========================================
-The abstracted build method useses the <fuel/ci/build.sh> script which allows you to:
-
-- Create and use a build cache - significantly speeding up the buildtime if upstream repositories have not changed.
-
-- push/pull cache and artifacts to an arbitrary URI (http(s):, file:, ftp:)
-
-For more info type <fuel/ci/build.sh -h>.
-
-5 Artifacts
-=============
-<DESCRIBE WHAT ARE THE PRODUCED ARTIFACTS AND WHERE THOSE CAN BE FOUND>
-
-<EXAMPLES>:
-
-The artifacts produced are:
-
-- <OPNFV_XXXX.iso> - Which represents the bootable Fuel@OPNFV image,
- XXXX is replaced with the build identity provided to the build system
-
-- <OPNFV_XXXX.iso.txt> - Which holds version metadata.
-
-6 References
-=============
-<PROVIDE NEEDED/USEFUL REFERENCES>
diff --git a/docs/templates/index.rst b/docs/templates/index.rst
deleted file mode 100644
index 2f124e5c0..000000000
--- a/docs/templates/index.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) <optionally add copywriters name>
-
-.. OPNFV Release Engineering documentation, created by
- sphinx-quickstart on Tue Jun 9 19:12:31 2015.
- You can adapt this file completely to your liking, but it should at least
- contain the root `toctree` directive.
-
-.. image:: opnfv-logo.png
- :height: 40
- :width: 200
- :alt: OPNFV
- :align: left
-
-Example Documentation table of contents
-=======================================
-
-Contents:
-
-.. toctree::
- :numbered:
- :maxdepth: 4
-
- build-instructions.rst
- installation-instructions.rst
- LICENSE.rst
- release-notes.rst
-
-
-Indices and tables
-==================
-
-* :ref:`search`
-
-Revision: _sha1_
-
-Build date: |today|
diff --git a/docs/templates/installation-instructions.rst b/docs/templates/installation-instructions.rst
deleted file mode 100644
index 8c46fe9ba..000000000
--- a/docs/templates/installation-instructions.rst
+++ /dev/null
@@ -1,239 +0,0 @@
-:Authors: Jonas Bjurel (Ericsson)
-:Version: 0.1
-
-Revision: _sha1_
-
-Build date: _date_
-
-
-================================================================
-OPNFV Installation instructions for - < Component denomination >
-================================================================
-
-Abstract
-========
-
-This document describes how to install <Component>, it's dependencies and required system resources.
-
-License
-=======
-<WORK'S NAME> (c) by <AUTHOR'S NAME>
-
-<WORK'S NAME> is licensed under a Creative Commons Attribution 4.0 International License.
-You should have received a copy of the license along with this.
-If not, see <http://creativecommons.org/licenses/by/4.0/>.
-
-
-**Contents**
-
-1 Version history
-
-2 Introduction
-
-3 Preface
-
-4 Hardware requirements
-
-5 Top of the rack (TOR) Configuration requirements
-
-6 OPNFV Software installation and deployment
-
-7 Installation health-check
-
-8 Post installation and deployment actions
-
-9 References
-
-1 Version history
-===================
-
-+--------------------+--------------------+--------------------+--------------------+
-| **Date** | **Ver.** | **Author** | **Comment** |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| 2015-04-14 | 0.1.0 | Jonas Bjurel | First draft |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| | 0.1.1 | | |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| | 1.0 | | |
-| | | | |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-
-2 Introduction
-================
-<INTRODUCTION TO THE SCOPE AND INTENTION OF THIS DOCUMENT AS WELL AS TO THE SYSTEM TO BE INSTALLED>
-
-<EXAMPLE>:
-
-This document describes the supported software and hardware configurations for the
-Fuel OPNFV reference platform as well as providing guidelines on how to install and
-configure such reference system.
-
-Although the available installation options gives a high degree of freedom in how the system is set-up,
-with what architecture, services and features, etc., not nearly all of those permutations provides
-a OPNFV compliant reference architecture. Following the guidelines in this document ensures
-a result that is OPNFV compliant.
-
-The audience of this document is assumed to have good knowledge in network and Unix/Linux administration.
-
-3 Preface
-===========
-<DESCRIBE NEEDED PREREQUISITES, PLANNING, ETC.>
-
-<EXAMPLE>:
-
-Before starting the installation of Fuel@OPNFV, some planning must preceed.
-
-First of all, the Fuel@OPNFV .iso image needs to be retrieved,
-the Latest stable Arno release of Fuel@OPNFV can be found here: <www.opnfv.org/abc/def>
-
-Alternatively, you may build the .iso from source by cloning the opnfv/genesis git repository:
-<git clone https://<linux foundation uid>@gerrit.opnf.org/gerrit/genesis>
-Check-out the Arno release:
-<cd genesis; git checkout arno>
-Goto the fuel directory and build the .iso
-<cd fuel/build; make all>
-
-Familiarize yourself with the Fuel 6.0.1 version by reading the following documents:
-- abc <http://wiki.openstack.org/abc>
-- def <http://wiki.openstack.org/def>
-- ghi <http://wiki.openstack.org/ghi>
-
-Secondly, a number of deployment specific parameters must be collected, those are:
-
-1. Provider sub-net and gateway information
-
-2. Provider VLAN information
-
-3. Provider DNS addresses
-
-4. Provider NTP addresses
-
-This information will be needed for the configuration procedures provided in this document.
-
-4 Hardware requirements
-=========================
-<PROVIDE A LIST OF MINIMUM HARDWARE REQUIREMENTS NEEDED FOR THE INSTALL>
-
-<EXAMPLE>:
-
-Following minimum hardware requirements must be met for installation of Fuel@OPNFV:
-
-+--------------------+----------------------------------------------------+
-| **HW Aspect** | **Requirement** |
-| | |
-+--------------------+----------------------------------------------------+
-| **# of servers** | Minimum 5 (3 for non redundant deployment) |
-| | 1 Fuel deployment master (may be virtualized) |
-| | 3(1) Controllers |
-| | 1 Compute |
-+--------------------+----------------------------------------------------+
-| **CPU** | Minimum 1 socket x86_AMD64 Ivy bridge 1.6 GHz |
-| | |
-+--------------------+----------------------------------------------------+
-| **RAM** | Minimum 16GB/server (Depending on VNF work load) |
-| | |
-+--------------------+----------------------------------------------------+
-| **Disk** | Minimum 256GB 10kRPM spinning disks |
-| | |
-+--------------------+----------------------------------------------------+
-| **NICs** | 2(1)x10GE Niantec for Private/Public (Redundant) |
-| | |
-| | 2(1)x10GE Niantec for SAN (Redundant) |
-| | |
-| | 2(1)x1GE for admin (PXE) and control (RabitMQ,etc) |
-| | |
-+--------------------+----------------------------------------------------+
-
-5 Top of the rack (TOR) Configuration requirements
-====================================================
-<DESCRIBE NEEDED NETWORK TOPOLOGY SETUP IN THE TORs>
-
-<EXAMPLE>:
-
-The switching infrastructure provides connectivity for the OPNFV infra-structure operations as well as
-for the tenant networks (East/West) and provider connectivity (North/South bound connectivity).
-The switching connectivity can (but does not need to) be fully redundant,
-in case it and comprises a redundant 10GE switch pair for "Traffic/Payload/SAN" purposes as well as
-a 1GE switch pair for "infrastructure control-, management and administration"
-
-The switches are **not** automatically configured from the OPNFV reference platform.
-All the networks involved in the OPNFV infra-structure as well as the provider networks
-and the private tenant VLANs needs to be manually configured.
-
-This following sections guides through required black-box switch configurations.
-
-5.1 VLAN considerations and blue-print
---------------------------------------
-
-5.2 IP Address plan considerations and blue-print
--------------------------------------------------
-
-6 OPNFV Software installation and deployment
-==============================================
-<DESCRIBE THE FULL PROCEDURES FOR THE INSTALLATION OF THE OPNFV COMPONENT INSTALLATION AND DEPLOYMENT>
-
-<EXAMPLE>:
-
-This section describes the installation of the Fuel@OPNFV installation server (Fuel master)
-as well as the deployment of the full OPNFV reference platform stack across a server cluster.
-Etc.
-
-6.1 Install Fuel master
------------------------
-
-6.2 Create an OPNV (Fuel Environment)
--------------------------------------
-
-6.3 Configure the OPNFV environment
------------------------------------
-
-6.4 Deploy the OPNFV environment
---------------------------------
-
-7 Installation health-check
-=============================
-<DESCRIBE ANY MEANS TO DO VERIFY THE INTEGRITY AND HEALTHYNESS OF THE INSTALL>
-
-<EXAMPLE>:
-
-Now that the OPNFV environment has been created, and before the post installation configurations is started,
-perform a system health check from the Fuel GUI:
-
-- Select the "Health check" TAB.
-- Select all test-cases
-- And click "Run tests"
-
-All test cases except the following should pass:
-
-8 Post installation and deployment actions
-============================================
-<DESCRIBE ANY POST INSTALLATION ACTIONS/CONFIGURATIONS NEEDED>
-
-<EXAMPLE>:
-After the OPNFV deployment is completed, the following manual changes needs to be performed in order
-for the system to work according OPNFV standards.
-
-**Change host OS password:**
-Change the Host OS password by......
-
-9 References
-=============
-<PROVIDE NEEDED/USEFUL REFERENCES>
-
-<EXAMPLES>:
-
-9.1 OPNFV
--------------
-
-9.2 OpenStack
------------------
-
-9.3 OpenDaylight
---------------------
-
-9.4 Fuel
-------------
diff --git a/docs/templates/release-notes.rst b/docs/templates/release-notes.rst
deleted file mode 100644
index 6941f181f..000000000
--- a/docs/templates/release-notes.rst
+++ /dev/null
@@ -1,261 +0,0 @@
-:Authors: Jonas Bjurel (Ericsson)
-:Version: 0.1
-
-Revision: _sha1_
-
-Build date: _date_
-
-
-======================================================================
-OPNFV Release Note for "Arno-SRx release" - < Component denomination >
-======================================================================
-
-Abstract
-========
-
-This document provides the release notes for <RELEASE> of <COMPONENT>.
-
-License
-=======
-<WORK'S NAME> (c) by <AUTHOR'S NAME>
-
-<WORK'S NAME> is licensed under a Creative Commons Attribution 4.0 International License.
-You should have received a copy of the license along with this. If not,
-see <http://creativecommons.org/licenses/by/4.0/>.
-
-
-**Contents**
-
-1 Version History
-
-2 Important notes
-
-3 Summary
-
-4 Delivery Data
-
-5 Known Limitations, Issues and Workarounds
-
-6 Test Result
-
-7 References
-
-1 Version history
-===================
-
-+--------------------+--------------------+--------------------+--------------------+
-| **Date** | **Ver.** | **Author** | **Comment** |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| 2015-04-14 | 0.1.0 | Jonas Bjurel | First draft |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| | 0.1.1 | | |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| | 1.0 | | |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-
-2 Important notes
-===================
-
-<STATE IMPORTANT NOTES/DEVIATIONS SINCE PREVIOUS ITERATIVE RELEASE AND OTHER IMPORTANT NOTES FOR THIS RELEASE>
-
-<EXAMPLE>:
-
-**Attention:** Please be aware that since LSV3 a pre-deploy script must be ran on the Fuel master -
-see the OPNFV@Fuel SW installation instructions
-
-3 Summary
-===========
-
-<SUMMARIZE THE RELEASE - THE CONTENT - AND OTHER IMPORTANT HIGH LEVEL PROPERTIES>
-
-<EXAMPLE>:
-
-Arno Fuel@OPNFV is based the OpenStack Fuel upstream project version 6.0.1,
-but adds OPNFV unique components such as OpenDaylight version: Helium as well as other OPNFV unique configurations......
-
-4 Release Data
-================
-<STATE RELEVANT RELEASE DATA/RECORDS>
-
-<EXAMPLE>:
-
-+--------------------------------------+--------------------------------------+
-| **Project** | E.g. Arno/genesis/fuel@opnfv |
-| | |
-+--------------------------------------+--------------------------------------+
-| **Repo/commit-ID** | E.g. genesis/adf634a0d4..... |
-| | |
-+--------------------------------------+--------------------------------------+
-| **Release designation** | E.g. Arno RC2 |
-| | |
-+--------------------------------------+--------------------------------------+
-| **Release date** | E.g. 2015-04-16 |
-| | |
-+--------------------------------------+--------------------------------------+
-| **Purpose of the delivery** | E.g. OPNFV Internal quality assurance|
-| | |
-+--------------------------------------+--------------------------------------+
-
-4.1 Version change
-------------------
-
-4.1.1 Module version changes
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-<STATE WHAT UPSTREAM, - AS WELL AS OPNFV MODULE VERSIONS HAVE CHANGED>
-
-<EXAMPLE>:
-
-- Fuel have changed from 5.1 to 6.0.1
-
-- OpenDaylight has changed from Helium-SR1 to Helium-SR2
-
-4.1.2 Document version changes
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-<STATE WHAT RELATED DOCUMENTS THAT CHANGES WITH THIS RELEASE>
-
-<EXAMPLE>:
-
-- The Fuel@OPNFV installation guide version has changed from version 0.1 to to 0.2
-
-4.2 Reason for version
-----------------------
-4.2.1 Feature additions
-~~~~~~~~~~~~~~~~~~~~~~~
-<STATE ADDED FEATURES BY REFERENCE TO JIRA>
-
-<EXAMPLE>:
-
-**JIRA BACK-LOG:**
-
-+--------------------------------------+--------------------------------------+
-| **JIRA REFERENCE** | **SLOGAN** |
-| | |
-+--------------------------------------+--------------------------------------+
-| BGS-123 | ADD OpenDaylight ml2 integration |
-| | |
-+--------------------------------------+--------------------------------------+
-| BGS-456 | Add auto-deployment of Fuel@OPNFV |
-| | |
-+--------------------------------------+--------------------------------------+
-
-4.2.2 Bug corrections
-~~~~~~~~~~~~~~~~~~~~~
-
-**JIRA TICKETS:**
-
-+--------------------------------------+--------------------------------------+
-| **JIRA REFERENCE** | **SLOGAN** |
-| | |
-+--------------------------------------+--------------------------------------+
-| BGS-888 | Fuel doesn't deploy |
-| | |
-+--------------------------------------+--------------------------------------+
-| BGS-999 | Floating IP doesn't work |
-| | |
-+--------------------------------------+--------------------------------------+
-
-4.3 Deliverables
-----------------
-
-4.3.1 Software deliverables
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-<STATE WHAT SOFTWARE DELIVERABLES THAT ARE RELATED TO THIS VERSION, AND WHERE THOSE CAN BE RETRIEVED>
-
-<EXAMPLE>:
-
-4.3.2 Documentation deliverables
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-<STATE WHAT DOCUMENTATION DELIVERABLES THAT ARE RELATED TO THIS VERSION, AND WHERE THOSE CAN BE RETRIEVED>
-
-<EXAMPLE>:
-
-5 Known Limitations, Issues and Workarounds
-============================================
-
-5.1 System Limitations
--------------------------
-<STATE ALL RELEVANT SYSTEM LIMITATIONS>
-
-<EXAMPLE>:
-
-**Max number of blades:** 1 Fuel master, 3 Controllers, 20 Compute blades
-
-**Min number of blades:** 1 Fuel master, 1 Controller, 1 Compute blade
-
-**Storage:** Ceph is the only supported storage configuration.
-
-**Max number of networks:** 3800 (Needs special switch config.)
-
-**L3Agent:** L3 agent and floating IPs is not supported.
-
-5.2 Known issues
--------------------
-<STATE ALL KNOWN ISSUES WITH JIRA REFERENCE>
-
-<EXAMPLE>:
-
-**JIRA TICKETS:**
-
-+--------------------------------------+--------------------------------------+
-| **JIRA REFERENCE** | **SLOGAN** |
-| | |
-+--------------------------------------+--------------------------------------+
-| BGS-987 | Nova-compute process does |
-| | not re-spawn when killed |
-| | |
-+--------------------------------------+--------------------------------------+
-| BGS-654 | MOS 5.1 : neutron net-list returns |
-| | "400 Bad request" |
-| | |
-+--------------------------------------+--------------------------------------+
-
-5.3 Workarounds
-------------------
-
-<STATE ALL KNOWN WORKAROUNDS TO THE ISSUES STATED ABOVE>
-
-<EXAMPLE>:
-
-- In case the contact with a compute is lost - restart the compute host
-- In case the disk is full on a controller - delete all files in /tmp
-
-6 Test Result
-==============
-<STATE THE QA COVERAGE AND RESULTS>
-
-<EXAMPLE>:
-
-Fuel@OPNFV Arno RC2 has undergone QA test runs with the following results:
-
-+--------------------------------------+--------------------------------------+
-| **TEST-SUITE** | **Results:** |
-| | |
-+--------------------------------------+--------------------------------------+
-| Tempest test suite 123 | Following tests failed: |
-| | |
-| | 1. Image resizing.... |
-| | |
-| | 2. Heat deploy.... |
-+--------------------------------------+--------------------------------------+
-| Robot test suite 456 | Following tests failed: |
-| | |
-| | 1....... |
-| | |
-| | 2....... |
-+--------------------------------------+--------------------------------------+
-
-7 References
-=============
-<STATE RELEVANT REFERENCES FOR THIS RELEASE/VERSION>
-
-<EXAMPLE>:
-
-For more information on the OPNFV Arno release, please see:
-
-http://wiki.opnfv.org/release/arno