diff options
Diffstat (limited to 'docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst')
| -rw-r--r-- | docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst new file mode 100644 index 000000000..3387eacc3 --- /dev/null +++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst @@ -0,0 +1,151 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. .. http://creativecommons.org/licenses/by/4.0 .. +.. (c) Christopher Price (Ericsson AB) and others + +<template> software installation and deployment +=============================================== + +This section describes the installation of the OPNFV installation +server (jumphost) as well as the deployment of the <template> OPNFV +reference platform stack across a server cluster. + +Install jumphost +---------------- + +If you have not already done so, prepare your jumphost according the instructions in _#ref_Preparation +this can be done using an ISO image with the following commands + +#. Mount the <template> ISO file/media as a boot device to the jump host server. + +#. Reboot the jump host to establish the jumphost server. + + - The system now boots from the ISO image. + + - Select "Fuel Install (Static IP)" + + - Press [Enter]. + +#. Wait until screen Fuel setup is shown (Note: This can take up to 30 minutes). + +At this time you can continue with the installation according to the following instructions. + +#. In the "Fuel User" section - Confirm/change the default password + + - Enter "admin" in the Fuel password input + + - Enter "admin" in the Confirm password input + + - Select "Check" and press [Enter] + +#. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network. + + - Configure eth1 or other network interfaces here as well (if you have them present on your FUEL server). + +#. In the "PXE Setup" section - Change the following fields to appropriate values (example below): + + - DHCP Pool Start 10.20.0.3 + + - DHCP Pool End 10.20.0.254 + + - DHCP Pool Gateway 10.20.0.2 (IP address of Fuel node) + +#. In the "DNS & Hostname" section - Change the following fields to appropriate values: + + - Hostname + + - Domain + + - Search Domain + + - External DNS + + - Hostname to test DNS + + - Select <Check> and press [Enter] + + +#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section, edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support) + + - Navigate to "HTTP proxy" and enter your http proxy address + + - Select <Check> and press [Enter] + +#. In the "Time Sync" section - Change the following fields to appropriate values: + + - NTP Server 1 <Customer NTP server 1> + + - NTP Server 2 <Customer NTP server 2> + + - NTP Server 3 <Customer NTP server 3> + +#. Start the installation. + + - Select Quit Setup and press Save and Quit. + + - Installation starts, wait until the login screen is shown. + + +Boot the Node Servers +--------------------- + +After the Fuel Master node has rebooted from the above steps and is at +the login prompt, you should boot the Node Servers (Your +Compute/Control/Storage blades (nested or real) with a PXE booting +scheme so that the FUEL Master can pick them up for control. + +#. Enable PXE booting + + - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu and hard disk as the second boot device in the same menu. + +#. Reboot all the control and compute blades. + +#. Wait for the availability of nodes showing up in the Fuel GUI. + + - Connect to the FUEL UI via the URL provided in the Console (default: https://10.20.0.2:8443) + + - Wait until all nodes are displayed in top right corner of the Fuel GUI: Total nodes and Unallocated nodes. + + +Install additional Plugins/Features on the FUEL node +---------------------------------------------------- + +#. SSH to your FUEL node (e.g. root@10.20.0.2 pwd: r00tme) + +#. Select wanted plugins/features from the /opt/opnfv/ directory. + +#. Install the wanted plugin with the command "fuel plugins --install /opt/opnfv/<plugin-name>-<version>.<arch>.rpm" + Expected output: "Plugin ....... was successfully installed." + +Create an OpenStack Environment +------------------------------- + +#. Connect to Fuel WEB UI with a browser (default: https://10.20.0.2:8443) (login admin/admin) + +#. Create and name a new OpenStack environment, to be installed. + +#. Select "<Liberty on Ubuntu 14.04>" and press <Next> + +#. Select "compute virtulization method". + + - Select "QEMU-KVM as hypervisor" and press <Next> + +#. Select "network mode". + + - Select "Neutron with ML2 plugin" + + - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins) + + - Press <Next> + +#. Select "Storage Back-ends". + + - Select "Ceph for block storage" and press <Next> + +#. Select "additional services" you wish to install. + + - Check option "Install Ceilometer (OpenStack Telemetry)" and press <Next> + +#. Create the new environment. + + - Click <Create> Button + |