diff options
Diffstat (limited to 'docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst')
| -rw-r--r-- | docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst new file mode 100644 index 000000000..ed9eaf8d2 --- /dev/null +++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst @@ -0,0 +1,73 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. .. http://creativecommons.org/licenses/by/4.0 .. +.. (c) Christopher Price (Ericsson AB) and others + + +OPTIONAL - Set Local Mirror Repos +--------------------------------- + +The following steps can be executed if you are in an environment with +no connection to the Internet. The Fuel server delivers a local repo +that can be used for installation / deployment of openstack. + +#. In the Fuel UI of your Environment, click the Settings Tab and select General from the left pane. + + - Replace the URI values for the "Name" values outlined below: + + - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main" + + - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-security main" + + - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main" + + - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted" + + - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted" + + - Click <Save Settings> at the bottom to Save your changes + +Target specific configuration +----------------------------- + +#. Set up targets for provisioning with non-default "Offloading Modes" + + Some target nodes may require additional configuration after they are + PXE booted (bootstrapped); the most frequent changes are in defaults + for ethernet devices' "Offloading Modes" settings (e.g. some targets' + ethernet drivers may strip VLAN traffic by default). + + If your target ethernet drivers have wrong "Offloading Modes" defaults, + in "Configure interfaces" page (described above), expand affected + interface's "Offloading Modes" and [un]check the relevant settings: + +#. Set up targets for "Verify Networks" with non-default "Offloading Modes" + + **NOTE**: Check *Reference 15* for an updated and comprehensive list of + known issues and/or limitations, including "Offloading Modes" not being + applied during "Verify Networks" step. + + Setting custom "Offloading Modes" in Fuel GUI will only apply those settings + during provisioning and **not** during "Verify Networks", so if your targets + need this change, you have to apply "Offloading Modes" settings by hand + to bootstrapped nodes. + + **E.g.**: Our driver has "rx-vlan-filter" default "on" (expected "off") on + the openstack interface(s) "eth1", preventing VLAN traffic from passing + during "Verify Networks". + + - From Fuel master console identify target nodes admin IPs: + + .. code-block:: bash + + $ fuel nodes + + + - SSH into each of the target nodes and disable "rx-vlan-filter" on the + affected physical interface(s) allocated for OpenStack traffic (eth1): + + .. code-block:: bash + + $ ssh root@10.20.0.6 ethtool -K eth1 rx-vlan-filter off + + - Repeat the step above for all affected nodes/interfaces in the POD. + |