summaryrefslogtreecommitdiffstats
path: root/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst')
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst73
1 files changed, 73 insertions, 0 deletions
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst
new file mode 100644
index 000000000..ed9eaf8d2
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst
@@ -0,0 +1,73 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+
+OPTIONAL - Set Local Mirror Repos
+---------------------------------
+
+The following steps can be executed if you are in an environment with
+no connection to the Internet. The Fuel server delivers a local repo
+that can be used for installation / deployment of openstack.
+
+#. In the Fuel UI of your Environment, click the Settings Tab and select General from the left pane.
+
+ - Replace the URI values for the "Name" values outlined below:
+
+ - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main"
+
+ - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-security main"
+
+ - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main"
+
+ - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted"
+
+ - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted"
+
+ - Click <Save Settings> at the bottom to Save your changes
+
+Target specific configuration
+-----------------------------
+
+#. Set up targets for provisioning with non-default "Offloading Modes"
+
+ Some target nodes may require additional configuration after they are
+ PXE booted (bootstrapped); the most frequent changes are in defaults
+ for ethernet devices' "Offloading Modes" settings (e.g. some targets'
+ ethernet drivers may strip VLAN traffic by default).
+
+ If your target ethernet drivers have wrong "Offloading Modes" defaults,
+ in "Configure interfaces" page (described above), expand affected
+ interface's "Offloading Modes" and [un]check the relevant settings:
+
+#. Set up targets for "Verify Networks" with non-default "Offloading Modes"
+
+ **NOTE**: Check *Reference 15* for an updated and comprehensive list of
+ known issues and/or limitations, including "Offloading Modes" not being
+ applied during "Verify Networks" step.
+
+ Setting custom "Offloading Modes" in Fuel GUI will only apply those settings
+ during provisioning and **not** during "Verify Networks", so if your targets
+ need this change, you have to apply "Offloading Modes" settings by hand
+ to bootstrapped nodes.
+
+ **E.g.**: Our driver has "rx-vlan-filter" default "on" (expected "off") on
+ the openstack interface(s) "eth1", preventing VLAN traffic from passing
+ during "Verify Networks".
+
+ - From Fuel master console identify target nodes admin IPs:
+
+ .. code-block:: bash
+
+ $ fuel nodes
+
+
+ - SSH into each of the target nodes and disable "rx-vlan-filter" on the
+ affected physical interface(s) allocated for OpenStack traffic (eth1):
+
+ .. code-block:: bash
+
+ $ ssh root@10.20.0.6 ethtool -K eth1 rx-vlan-filter off
+
+ - Repeat the step above for all affected nodes/interfaces in the POD.
+