1 files changed, 156 insertions, 0 deletions
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst
new file mode 100644
index 000000000..17200d5c2
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst
@@ -0,0 +1,156 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+Configure the network environment
+---------------------------------
+
+#. Open the environment you previously created.
+
+#. Open the networks tab and select the "default Node Networks group to" on the left pane.
+
+#. Update the Public network configuration and change the following fields to appropriate values:
+
+   - CIDR to <CIDR for Public IP Addresses>
+
+   - IP Range Start to <Public IP Address start>
+
+   - IP Range End to <Public IP Address end>
+
+   - Gateway to <Gateway for Public IP Addresses>
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN id.
+
+#. Update the Storage Network Configuration
+
+   - Set CIDR to appropriate value  (default 192.168.1.0/24)
+
+   - Set IP Range Start to appropriate value (default 192.168.1.1)
+
+   - Set IP Range End to appropriate value (default 192.168.1.254)
+
+   - Set vlan to appropriate value  (default 102)
+
+#. Update the Management network configuration.
+
+   - Set CIDR to appropriate value (default 192.168.0.0/24)
+
+   - Set IP Range Start to appropriate value (default 192.168.0.1)
+
+   - Set IP Range End to appropriate value (default 192.168.0.254)
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN id. (default 101)
+
+#. Update the Private Network Information
+
+   - Set CIDR to appropriate value (default 192.168.2.0/24
+
+   - Set IP Range Start to appropriate value (default 192.168.2.1)
+
+   - Set IP Range End to appropriate value (default 192.168.2.254)
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN tag (default 103)
+
+#. Select the "Neutron L3 Node Networks group" on the left pane.
+
+#. Update the Floating Network configuration.
+
+   - Set the Floating IP range start (default 172.16.0.130)
+
+   - Set the Floating IP range end (default 172.16.0.254)
+
+   - Set the Floating network name (default admin_floating_net)
+
+#. Update the Internal Network configuration.
+
+   - Set Internal network CIDR to an appropriate value (default 192.168.111.0/24)
+
+   - Set Internal network gateway to an appropriate value
+
+   - Set the Internal network name (default admin_internal_net)
+
+#. Update the Guest OS DNS servers.
+
+   - Set Guest OS DNS Server values appropriately
+
+#. Save Settings.
+
+#. Select the "Other Node Networks group" on the left pane.
+
+#. Update the Public network assignment.
+
+   - Check the box for "Assign public network to all nodes" (Required by OpenDaylight)
+
+#. Update Host OS DNS Servers.
+
+   - Provide the DNS server settings
+
+#. Update Host OS NTP Servers.
+
+   - Provide the NTP server settings
+
+Select Hypervisor type
+----------------------
+
+#. In the FUEL UI of your Environment, click the "Settings" Tab
+
+#. Select Compute on the left side pane
+
+   - Check the KVM box and press "Save settings"
+
+Enable Plugins
+--------------
+
+#. In the FUEL UI of your Environment, click the "Settings" Tab
+
+#. Select Other on the left side pane
+
+   - Enable and configure the plugins of your choice
+
+Allocate nodes to environment and assign functional roles
+---------------------------------------------------------
+
+#. Click on the "Nodes" Tab in the FUEL WEB UI.
+
+#. Assign roles.
+
+    - Click on the <+Add Nodes> button
+
+    - Check <Controller>, <Telemetry - MongoDB>  and optionally an SDN Controller role (OpenDaylight controller/ONOS) in the Assign Roles Section.
+
+    - Check one node which you want to act as a Controller from the bottom half of the screen
+
+    - Click <Apply Changes>.
+
+    - Click on the <+Add Nodes> button
+
+    - Check the <Controller> and <Storage - Ceph OSD> roles.
+
+    - Check the two next nodes you want to act as Controllers from the bottom half of the screen
+
+    - Click <Apply Changes>
+
+    - Click on <+Add Nodes> button
+
+    - Check the <Compute> and <Storage - Ceph OSD> roles.
+
+    - Check the Nodes you want to act as Computes from the bottom half of the screen
+
+    - Click <Apply Changes>.
+
+#. Configure interfaces.
+
+    - Check Select <All> to select all allocated nodes
+
+    - Click <Configure Interfaces>
+
+    - Assign interfaces (bonded) for mgmt-, admin-, private-, public-
+      and storage networks
+
+    - Click <Apply>