summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/installationprocedure/abstract.rst7
-rw-r--r--docs/installationprocedure/feature.configuration.rst21
-rw-r--r--docs/installationprocedure/index.rst14
-rw-r--r--docs/installationprocedure/installation.introduction.rst84
-rw-r--r--docs/installationprocedure/scenario.installation.instruction.rst26
-rw-r--r--docs/installationprocedure/scenario.release.notes.rst134
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/abstract.rst15
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst32
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst27
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/index.rst24
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst156
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst73
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst155
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/introduction.rst18
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/post.deploy.rst16
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst101
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/references.rst51
-rw-r--r--docs/userguide/abstract.rst16
-rw-r--r--docs/userguide/common.platform.render.rst26
-rw-r--r--docs/userguide/feature.userguide.render.rst15
-rw-r--r--docs/userguide/feature.userguide.template.rst12
-rw-r--r--docs/userguide/index.rst11
-rw-r--r--docs/userguide/introduction.rst65
-rw-r--r--docs/userguide/onos.rst51
-rw-r--r--docs/userguide/opendaylight.rst55
-rw-r--r--docs/userguide/openstack.rst50
-rw-r--r--docs/userguide/userguide.introduction.rst58
27 files changed, 148 insertions, 1165 deletions
diff --git a/docs/installationprocedure/abstract.rst b/docs/installationprocedure/abstract.rst
deleted file mode 100644
index b9b85b0c0..000000000
--- a/docs/installationprocedure/abstract.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) <optionally add copywriters name>
-
-This document will give the user instructions on how to deploy
-available scenarios verfied for the Colorado release of the OPNFV
-platform.
diff --git a/docs/installationprocedure/feature.configuration.rst b/docs/installationprocedure/feature.configuration.rst
deleted file mode 100644
index 267efd5c1..000000000
--- a/docs/installationprocedure/feature.configuration.rst
+++ /dev/null
@@ -1,21 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) <optionally add copywriters name>
-
-=====================================================
-<scenario> installation and configuration instruction
-=====================================================
-
-Abstract
-========
-This document provides information on how to configure required
-components during the installation of the platform.
-
-Pre-configuration activites
-===========================
-List the information and activities needed as pre configuration.
-
-Feature configuration
-=====================
-List the steps needed for the configuration of <feature> and <components> of the scenario.
-
diff --git a/docs/installationprocedure/index.rst b/docs/installationprocedure/index.rst
index e69204b98..3d02f310b 100644
--- a/docs/installationprocedure/index.rst
+++ b/docs/installationprocedure/index.rst
@@ -2,17 +2,13 @@
.. http://creativecommons.org/licenses/by/4.0
.. (c) Sofia Wallin Ericsson AB
-**********************
-Installation procedure
-**********************
-Colorado 1.0
-------------
+******************************
+OPNFV Installation Instruction
+******************************
.. toctree::
:numbered:
- :maxdepth: 2
+ :maxdepth: 3
- abstract.rst
- scenario.installation.instruction.rst
- scenario.release.notes.rst
+ installation.introduction.rst
diff --git a/docs/installationprocedure/installation.introduction.rst b/docs/installationprocedure/installation.introduction.rst
new file mode 100644
index 000000000..ae4a601ae
--- /dev/null
+++ b/docs/installationprocedure/installation.introduction.rst
@@ -0,0 +1,84 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+ .. (c) Sofia Wallin Ericsson AB
+
+========
+Abstract
+========
+
+The following document provides an overview of the instructions required for the installation
+of the Colorado release of OPNFV.
+
+The Colorado release can be installed using a variety of technologies provided by the
+integration projects participating in OPNFV: Apex, Compass4Nfv, Fuel and JOID.
+Each installer provides the ability to install a common OPNFV platform as well as integrating
+additional features delivered through a variety of scenarios by the OPNFV community.
+
+============
+Introduction
+============
+
+The OPNFV platform is comprised of a variety of upstream components that may be deployed on your physical
+infrastructure. A composition of components, tools and configurations is identified in OPNFV as a
+deployment scenario.
+The various OPNFV scenarios provide unique features and capabilities that you may want to leverage,
+it is important to understand your required target platform capabilities before installing and
+configuring your target scenario.
+
+An OPNFV installation requires either a physical, or virtual, infrastructure environment as defined
+in the `Pharos specification <http://artifacts.opnfv.org/pharos/colorado/docs/specification/index.html>`_.
+When configuring a physical infrastructure it is strongly advised to follow the Pharos configuration guidelines.
+
+=========
+Scenarios
+=========
+
+OPNFV scenarios are designed to host virtualised network functions (VNF’s) in a variety of deployment
+architectures and locations. Each scenario provides specific capabilities and/or components aimed to
+solve specific problems for the deployment of VNF’s.
+A scenario may, for instance, include components such as OpenStack, OpenDaylight, OVS, KVM etc...
+where each scenario will include different source components or configurations.
+
+To learn more about the scenarios supported in the Colorado release refer to the scenario
+description documents provided:
+
+- Accelerated OVS `os-nosdn-ovs <http://artifacts.opnfv.org/ovsnfv/colorado/docs/scenarios_os-nosdn-ovs/index.html>`_
+- FD.io based forwarding `os-nosdn-fdio-noha <http://artifacts.opnfv.org/fds/docs/scenarios_os-nosdn-fdio-noha/index.html>`_
+- Layer 3 overlay using opendaylight `os-odl-l2-bgpvpn <http://artifacts.opnfv.org/bgpvpn/colorado/docs/scenarios_os-odl_l2-bgpvpn/index.html>`_
+- FD.io based forwarding using opendaylight SDN `os-odl-12-fdio-noha <http://artifacts.opnfv.org/fds/colorado/scenarios_os-odl_l2-fdio-noha/index.html>`_
+- High availability service function chaining `os-odl-l2-sfc-ha <http://artifacts.opnfv.org/sfc/colorado/docs/scenarios_os-odl_l2-sfc-ha/index.html>`_
+- Service function chaining `os-odl-l2-sfc-noha <http://artifacts.opnfv.org/sfc/colorado/docs/scenarios_os-odl_l2-sfc-noha/index.html>`_
+- `os-odl-l2-moon-ha <http://artifacts.opnfv.org/moon/colorado/docs/senarios/os-odl_l2-moon-ha/index.html>`_
+
+======================
+Installation Procedure
+======================
+
+Detailed step by step instructions for working with an installation toolchain and installing
+the required scenario are provided by each installation project. The four projects providing installation
+support for the OPNFV Colorado release are; Apex, Compass4nfv, Fuel and Joid.
+
+The instructions for each toolchain can be found in these links:
+
+- `Apex installation instruction <http://artifacts.opnfv.org/apex/colorado/docs/installationprocedure/index.html>`_
+- `Compass4nfv installation instruction <http://artifacts.opnfv.org/compass4nfv/colorado/docs/installationprocedure/index.html>`_
+- `Fuel installation instruction <http://artifacts.opnfv.org/fuel/colorado/docs/installationprocedure/index.html>`_
+- `Joid installation instruction <http://artifacts.opnfv.org/joid/colorado/docs/installationprocedure/index.html>`_
+
+=====================
+OPNFV Test Frameworks
+=====================
+
+If you have elected to install the OPNFV platform using the deployment toolchain provided by OPNFV
+your system will have been validated once the installation is completed.
+The basic deployment validation only addresses a small component of the capability provided in
+the platform and you may desire to execute more exhaustive tests. Some investigation is required to
+select the right test suites to run on your platform from the available projects and suites.
+
+Many of the OPNFV test project provide user-guide documentation and installation instructions as provided below:
+
+- `Functest user guide <http://artifacts.opnfv.org/functest/colorado/docs/userguide/index.html>`_
+- `Yardstick user guide <http://artifacts.opnfv.org/yardstick/colorado/docs/userguide/index.html>`_
+- `vSwitchPerf user guide <http://artifacts.opnfv.org/vswitchperf/colorado/index.html>`_
+- `Software Fastpath Service Quality Metrics (SFQM) user guide <http://artifacts.opnfv.org/fastpathmetrics/colorado/index.html>`_
+- `Bottlenecks user guide <http://artifacts.opnfv.org/bottlenecks/colorado/docs/installationprocedure/index.html>`_
diff --git a/docs/installationprocedure/scenario.installation.instruction.rst b/docs/installationprocedure/scenario.installation.instruction.rst
deleted file mode 100644
index a3ddd3ac8..000000000
--- a/docs/installationprocedure/scenario.installation.instruction.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) <optionally add copywriters name>
-
-===================================
-<scenario> installation instruction
-===================================
-
-Preparing the installation
---------------------------
-.. List the activities needed prior to installation and dependent feature configurations that
-.. need to be is to be configured during this process.
-
-HW requirements
----------------
-.. A generic Pharos lab preparation instruction will be provided, this section should describe
-.. scenario has any specific hardware or hardware configuration needs.
-
-Installation instruction
-------------------------
-.. List of steps needed to install each verified installer.
-
-Post-installation activities
-----------------------------
-.. List the activities needed post installation.
-
diff --git a/docs/installationprocedure/scenario.release.notes.rst b/docs/installationprocedure/scenario.release.notes.rst
deleted file mode 100644
index eaffd9b19..000000000
--- a/docs/installationprocedure/scenario.release.notes.rst
+++ /dev/null
@@ -1,134 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) <optionally add copywriters name>
-
-===========================
-Release Note for <scenario>
-===========================
-Colorado 1.0
-------------
-
-.. toctree::
- :maxdepth: 2
-
-Abstract
-========
-
-This document contains the release notes for the Colorado release of
-OPNFV when using <scenario>.
-
-Introduction
-============
-
-Provide a breif introduction of how this configuration is used in OPNFV relese using <scenario> as scenario.
-
-Be sure to reference your scenario installation instruction.
-
-Release Data
-============
-
-+--------------------------------------+--------------------------------------+
-| **Project** | |
-| | |
-+--------------------------------------+--------------------------------------+
-| **Repo/tag** | |
-| | |
-+--------------------------------------+--------------------------------------+
-| **Release designation** | |
-| | |
-+--------------------------------------+--------------------------------------+
-| **Release date** | |
-| | |
-+--------------------------------------+--------------------------------------+
-| **Purpose of the delivery** | |
-| | |
-+--------------------------------------+--------------------------------------+
-
-Deliverables
-------------
-
-Software deliverables
-~~~~~~~~~~~~~~~~~~~~~
-<XYZ>-based installer iso file <iso file version>
-
-Documentation deliverables
-~~~~~~~~~~~~~~~~~~~~~~~~~~
--
-
-Version change
---------------
-.. This section describes the changes made since the last version of this document.
-
-Module version change
-~~~~~~~~~~~~~~~~~~~~~
-
-Document version change
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Reason for new version
-----------------------
-
-Feature additions
-~~~~~~~~~~~~~~~~~
-
-+--------------------------------------+--------------------------------------+
-| **JIRA REFERENCE** | **SLOGAN** |
-| | |
-+--------------------------------------+--------------------------------------+
-| JIRA: | |
-| | |
-+--------------------------------------+--------------------------------------+
-| JIRA: | |
-| | |
-+--------------------------------------+--------------------------------------+
-
-Bug corrections
-~~~~~~~~~~~~~~~
-
-**JIRA TICKETS:**
-
-+--------------------------------------+--------------------------------------+
-| **JIRA REFERENCE** | **SLOGAN** |
-| | |
-+--------------------------------------+--------------------------------------+
-| JIRA: | |
-| | |
-+--------------------------------------+--------------------------------------+
-
-
-Known Limitations, Issues and Workarounds
-=========================================
-
-System Limitations
-------------------
-
-Known issues
-------------
-
-**JIRA TICKETS:**
-
-+--------------------------------------+--------------------------------------+
-| **JIRA REFERENCE** | **SLOGAN** |
-| | |
-+--------------------------------------+--------------------------------------+
-| JIRA: | |
-+--------------------------------------+--------------------------------------+
-| JIRA: | |
-+--------------------------------------+--------------------------------------+
-
-
-Workarounds
------------
-See JIRA: <link>
-
-
-Test Result
-===========
-Brahmaputra test result using <XYZ> as deployment tool.
-<link>
-
-References
-==========
-For more information on the OPNFV Brahmaputra release, please visit
-http://www.opnfv.org/brahmaputra
-
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/abstract.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/abstract.rst
deleted file mode 100644
index ae15012ca..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/abstract.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-Abstract
-========
-.. Provide a brief abstract of the document and what it provides, in this case a
-.. vanilla opnfv deployment using fuel is provided as a template. This template is
-.. not accurate and does not provide instructions to deploy a Colorado scenario.
-
-This document describes how to install the <template> scenario of the Colorado
-release of OPNFV.
-
-The <template> scenario will use Fuel as a deployment tool, installing and deploying an OPNFV
-based OpenStack in high availability on a Pharos compliant infrastructure.
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst
deleted file mode 100644
index 4a8852ee6..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-
-Verify Networks
----------------
-
-It is important that the Verify Networks action is performed as it will verify
-that communicate works for the networks you have setup, as well as check that
-packages needed for a successful deployment can be fetched.
-
-From the FUEL UI in your Environment, Select the Networks Tab and select "Connectivity check" on the left pane
-
- - Select <Verify Networks>
-
- - Continue to fix your topology (physical switch, etc) until the "Verification Succeeded" and "Your network is configured correctly" message is shown
-
-Deploy Your Environment
------------------------
-
-Deploy the environment.
-
- - In the Fuel GUI, click on the "Dashboard" Tab.
-
- - Click on <Deploy Changes> in the "Ready to Deploy?" section
-
- - Examine any information notice that pops up and click <Deploy>
-
- Wait for your deployment to complete, you can view the "Dashboard"
- Tab to see the progress and status of your deployment.
-
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst
deleted file mode 100644
index 328f92199..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-Hardware requirements
-=====================
-
-The Pharos Lab
---------------
-
-Hardware requirements for OPNFV infrastuctures are specified by the Pharos project.
-The Pharos project provides an OPNFV hardware specification for configuring your hardware
-at: http://artifacts.opnfv.org/pharos/docs/pharos-spec.html .
-
-Virtual deployment hardware requirements
-----------------------------------------
-
-To perform a virtual deployment of an OPNFV scenario establised different hardware requirements.
-The server requirements for this type of deployment are outlined in the <missing spec>.
-
-.. Additional Hardware requirements
-.. --------------------------------
-..
-.. Your scenario may require specific capabilities that are not explicitly stated in
-.. the Pharos spec. If this is the case add your specific hardware requirements to this
-.. section of the document under sub-headings.
-
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/index.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/index.rst
deleted file mode 100644
index 0e24d435e..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/index.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Christopher Price Ericsson AB
-
-========================================================================================================
-OPNFV Installation instruction for the template-os-nosdn-nofeature-ha scenario
-========================================================================================================
-
-.. toctree::
- :numbered:
- :maxdepth: 2
-
- abstract.rst
- introduction.rst
- preparation.rst
- hardware.requirements.rst
- installation.rst
- install.config.rst
- install.optional.rst
- deployment.rst
- post.deploy.rst
- references.rst
-
-
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst
deleted file mode 100644
index 17200d5c2..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst
+++ /dev/null
@@ -1,156 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-Configure the network environment
----------------------------------
-
-#. Open the environment you previously created.
-
-#. Open the networks tab and select the "default Node Networks group to" on the left pane.
-
-#. Update the Public network configuration and change the following fields to appropriate values:
-
- - CIDR to <CIDR for Public IP Addresses>
-
- - IP Range Start to <Public IP Address start>
-
- - IP Range End to <Public IP Address end>
-
- - Gateway to <Gateway for Public IP Addresses>
-
- - Check <VLAN tagging>.
-
- - Set appropriate VLAN id.
-
-#. Update the Storage Network Configuration
-
- - Set CIDR to appropriate value (default 192.168.1.0/24)
-
- - Set IP Range Start to appropriate value (default 192.168.1.1)
-
- - Set IP Range End to appropriate value (default 192.168.1.254)
-
- - Set vlan to appropriate value (default 102)
-
-#. Update the Management network configuration.
-
- - Set CIDR to appropriate value (default 192.168.0.0/24)
-
- - Set IP Range Start to appropriate value (default 192.168.0.1)
-
- - Set IP Range End to appropriate value (default 192.168.0.254)
-
- - Check <VLAN tagging>.
-
- - Set appropriate VLAN id. (default 101)
-
-#. Update the Private Network Information
-
- - Set CIDR to appropriate value (default 192.168.2.0/24
-
- - Set IP Range Start to appropriate value (default 192.168.2.1)
-
- - Set IP Range End to appropriate value (default 192.168.2.254)
-
- - Check <VLAN tagging>.
-
- - Set appropriate VLAN tag (default 103)
-
-#. Select the "Neutron L3 Node Networks group" on the left pane.
-
-#. Update the Floating Network configuration.
-
- - Set the Floating IP range start (default 172.16.0.130)
-
- - Set the Floating IP range end (default 172.16.0.254)
-
- - Set the Floating network name (default admin_floating_net)
-
-#. Update the Internal Network configuration.
-
- - Set Internal network CIDR to an appropriate value (default 192.168.111.0/24)
-
- - Set Internal network gateway to an appropriate value
-
- - Set the Internal network name (default admin_internal_net)
-
-#. Update the Guest OS DNS servers.
-
- - Set Guest OS DNS Server values appropriately
-
-#. Save Settings.
-
-#. Select the "Other Node Networks group" on the left pane.
-
-#. Update the Public network assignment.
-
- - Check the box for "Assign public network to all nodes" (Required by OpenDaylight)
-
-#. Update Host OS DNS Servers.
-
- - Provide the DNS server settings
-
-#. Update Host OS NTP Servers.
-
- - Provide the NTP server settings
-
-Select Hypervisor type
-----------------------
-
-#. In the FUEL UI of your Environment, click the "Settings" Tab
-
-#. Select Compute on the left side pane
-
- - Check the KVM box and press "Save settings"
-
-Enable Plugins
---------------
-
-#. In the FUEL UI of your Environment, click the "Settings" Tab
-
-#. Select Other on the left side pane
-
- - Enable and configure the plugins of your choice
-
-Allocate nodes to environment and assign functional roles
----------------------------------------------------------
-
-#. Click on the "Nodes" Tab in the FUEL WEB UI.
-
-#. Assign roles.
-
- - Click on the <+Add Nodes> button
-
- - Check <Controller>, <Telemetry - MongoDB> and optionally an SDN Controller role (OpenDaylight controller/ONOS) in the Assign Roles Section.
-
- - Check one node which you want to act as a Controller from the bottom half of the screen
-
- - Click <Apply Changes>.
-
- - Click on the <+Add Nodes> button
-
- - Check the <Controller> and <Storage - Ceph OSD> roles.
-
- - Check the two next nodes you want to act as Controllers from the bottom half of the screen
-
- - Click <Apply Changes>
-
- - Click on <+Add Nodes> button
-
- - Check the <Compute> and <Storage - Ceph OSD> roles.
-
- - Check the Nodes you want to act as Computes from the bottom half of the screen
-
- - Click <Apply Changes>.
-
-#. Configure interfaces.
-
- - Check Select <All> to select all allocated nodes
-
- - Click <Configure Interfaces>
-
- - Assign interfaces (bonded) for mgmt-, admin-, private-, public-
- and storage networks
-
- - Click <Apply>
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst
deleted file mode 100644
index ed9eaf8d2..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst
+++ /dev/null
@@ -1,73 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-
-OPTIONAL - Set Local Mirror Repos
----------------------------------
-
-The following steps can be executed if you are in an environment with
-no connection to the Internet. The Fuel server delivers a local repo
-that can be used for installation / deployment of openstack.
-
-#. In the Fuel UI of your Environment, click the Settings Tab and select General from the left pane.
-
- - Replace the URI values for the "Name" values outlined below:
-
- - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main"
-
- - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-security main"
-
- - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main"
-
- - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted"
-
- - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted"
-
- - Click <Save Settings> at the bottom to Save your changes
-
-Target specific configuration
------------------------------
-
-#. Set up targets for provisioning with non-default "Offloading Modes"
-
- Some target nodes may require additional configuration after they are
- PXE booted (bootstrapped); the most frequent changes are in defaults
- for ethernet devices' "Offloading Modes" settings (e.g. some targets'
- ethernet drivers may strip VLAN traffic by default).
-
- If your target ethernet drivers have wrong "Offloading Modes" defaults,
- in "Configure interfaces" page (described above), expand affected
- interface's "Offloading Modes" and [un]check the relevant settings:
-
-#. Set up targets for "Verify Networks" with non-default "Offloading Modes"
-
- **NOTE**: Check *Reference 15* for an updated and comprehensive list of
- known issues and/or limitations, including "Offloading Modes" not being
- applied during "Verify Networks" step.
-
- Setting custom "Offloading Modes" in Fuel GUI will only apply those settings
- during provisioning and **not** during "Verify Networks", so if your targets
- need this change, you have to apply "Offloading Modes" settings by hand
- to bootstrapped nodes.
-
- **E.g.**: Our driver has "rx-vlan-filter" default "on" (expected "off") on
- the openstack interface(s) "eth1", preventing VLAN traffic from passing
- during "Verify Networks".
-
- - From Fuel master console identify target nodes admin IPs:
-
- .. code-block:: bash
-
- $ fuel nodes
-
-
- - SSH into each of the target nodes and disable "rx-vlan-filter" on the
- affected physical interface(s) allocated for OpenStack traffic (eth1):
-
- .. code-block:: bash
-
- $ ssh root@10.20.0.6 ethtool -K eth1 rx-vlan-filter off
-
- - Repeat the step above for all affected nodes/interfaces in the POD.
-
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
deleted file mode 100644
index bcfb6d5de..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
+++ /dev/null
@@ -1,155 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-<scenario> software installation and deployment
-===============================================
-
-.. Let's figure out how to structure this to highlight both virtual and
-.. bare metal deployments. I need some help from the scenrio owners to get
-.. that right.
-
-This section describes the installation of the OPNFV installation
-server (jumphost) as well as the deployment of the <scenario> OPNFV
-reference platform stack across a server cluster.
-
-Install jumphost
-----------------
-
-If you have not already done so, prepare your jumphost according the instructions in _#ref_Preparation
-this can be done using an ISO image with the following commands
-
-#. Mount the <scenario> ISO file/media as a boot device to the jump host server.
-
-#. Reboot the jump host to establish the jumphost server.
-
- - The system now boots from the ISO image.
-
- - Select "Fuel Install (Static IP)"
-
- - Press [Enter].
-
-#. Wait until screen Fuel setup is shown (Note: This can take up to 30 minutes).
-
-At this time you can continue with the installation according to the following instructions.
-
-#. In the "Fuel User" section - Confirm/change the default password
-
- - Enter "admin" in the Fuel password input
-
- - Enter "admin" in the Confirm password input
-
- - Select "Check" and press [Enter]
-
-#. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network.
-
- - Configure eth1 or other network interfaces here as well (if you have them present on your FUEL server).
-
-#. In the "PXE Setup" section - Change the following fields to appropriate values (example below):
-
- - DHCP Pool Start 10.20.0.3
-
- - DHCP Pool End 10.20.0.254
-
- - DHCP Pool Gateway 10.20.0.2 (IP address of Fuel node)
-
-#. In the "DNS & Hostname" section - Change the following fields to appropriate values:
-
- - Hostname
-
- - Domain
-
- - Search Domain
-
- - External DNS
-
- - Hostname to test DNS
-
- - Select <Check> and press [Enter]
-
-
-#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section, edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support)
-
- - Navigate to "HTTP proxy" and enter your http proxy address
-
- - Select <Check> and press [Enter]
-
-#. In the "Time Sync" section - Change the following fields to appropriate values:
-
- - NTP Server 1 <Customer NTP server 1>
-
- - NTP Server 2 <Customer NTP server 2>
-
- - NTP Server 3 <Customer NTP server 3>
-
-#. Start the installation.
-
- - Select Quit Setup and press Save and Quit.
-
- - Installation starts, wait until the login screen is shown.
-
-
-Boot the Node Servers
----------------------
-
-After the Fuel Master node has rebooted from the above steps and is at
-the login prompt, you should boot the Node Servers (Your
-Compute/Control/Storage blades (nested or real) with a PXE booting
-scheme so that the FUEL Master can pick them up for control.
-
-#. Enable PXE booting
-
- - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu and hard disk as the second boot device in the same menu.
-
-#. Reboot all the control and compute blades.
-
-#. Wait for the availability of nodes showing up in the Fuel GUI.
-
- - Connect to the FUEL UI via the URL provided in the Console (default: https://10.20.0.2:8443)
-
- - Wait until all nodes are displayed in top right corner of the Fuel GUI: Total nodes and Unallocated nodes.
-
-
-Install additional Plugins/Features on the FUEL node
-----------------------------------------------------
-
-#. SSH to your FUEL node (e.g. root@10.20.0.2 pwd: r00tme)
-
-#. Select wanted plugins/features from the /opt/opnfv/ directory.
-
-#. Install the wanted plugin with the command "fuel plugins --install /opt/opnfv/<plugin-name>-<version>.<arch>.rpm"
- Expected output: "Plugin ....... was successfully installed."
-
-Create an OpenStack Environment
--------------------------------
-
-#. Connect to Fuel WEB UI with a browser (default: https://10.20.0.2:8443) (login admin/admin)
-
-#. Create and name a new OpenStack environment, to be installed.
-
-#. Select "<Liberty on Ubuntu 14.04>" and press <Next>
-
-#. Select "compute virtulization method".
-
- - Select "QEMU-KVM as hypervisor" and press <Next>
-
-#. Select "network mode".
-
- - Select "Neutron with ML2 plugin"
-
- - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins)
-
- - Press <Next>
-
-#. Select "Storage Back-ends".
-
- - Select "Ceph for block storage" and press <Next>
-
-#. Select "additional services" you wish to install.
-
- - Check option "Install Ceilometer (OpenStack Telemetry)" and press <Next>
-
-#. Create the new environment.
-
- - Click <Create> Button
-
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/introduction.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/introduction.rst
deleted file mode 100644
index fffe5e867..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/introduction.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-Introduction
-============
-
-This document provides guidelines on how to install and configure the
-<template> scenario of OPNFV including required software and hardware configurations.
-
-Although the available installation options give a high degree of
-freedom in how the system is set-up, including architecture, services
-and features, etc., said permutations may not provide an OPNFV
-compliant reference architecture. This instruction provides a
-step-by-step guide that results in an OPNFV Compliant deployment.
-
-The audience of this document is assumed to have good knowledge in
-networking and Unix/Linux administration.
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/post.deploy.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/post.deploy.rst
deleted file mode 100644
index 752db6c9e..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/post.deploy.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-
-Installation health-check
-=========================
-
-#. Perform system health-check (see figure below)
-
- - Click the "Health Check" tab inside your Environment in the FUEL Web UI
-
- - Check <Select All> and Click <Run Tests>
-
- - Allow tests to run and investigate results where appropriate
-
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst
deleted file mode 100644
index 450c8bf5e..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst
+++ /dev/null
@@ -1,101 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-Preparation
-===========
-.. Not all of these options are relevant for all scenario's. I advise following the
-.. instructions applicable to the deploy tool used in the scenario.
-
-Before starting the installation of the <scenario> scenario some preparation must
-be done. You may choose to install the <scenario> scenario using an ISO image, or
-executing the installation from a prepared jumphost.
-
-Preparing your jumphost to install by script
---------------------------------------------
-
-To deploy the <scenario> scenario from a script you will need to prepare the jumphost
-with a compatible operating system. Prepare your jumphost running CentOS 7 with libvirt
-running on it. You may then install the RDO Release RPM:
-
-``sudo yum install -y https://www.rdoproject.org/repos/rdo-release.rpm opnfv-apex-{version}.rpm``
-
-The RDO Project release repository is needed to install OpenVSwitch, which is a dependency of
-opnfv-apex. If you do not have external connectivity to use this repository you need to download
-the OpenVSwitch RPM from the RDO Project repositories and install it with the opnfv-apex RPM.
-
-Preparing your jumphost using an ISO image
-------------------------------------------
-
-An alternative to preparing your own jumphost id to use a <scenario> ISO image as a boot image.
-Download or build the ISO image according to the following instructions.
-
-Retrieving the ISO image
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-If you choose to install the <scenario> scenario from an ISO image you must first
-retrieve the <template-containing>.iso image of the Colorado release. This can be
-found can be found at <hyperlink required>.
-
-Building the ISO image
-^^^^^^^^^^^^^^^^^^^^^^
-
-Alternatively, you may choose to build the Fuel .iso from source by cloning the
-opnfv/fuel git repository. To retrieve the repository for the Colorado release use the following command:
-
-$ git clone https://gerrit.opnfv.org/gerrit/fuel
-
-Check-out the Colorado release tag to set the HEAD to the
-baseline required to replicate the Colorado release:
-
-$ git checkout colorado.1.0
-
-Go to the fuel directory and build the .iso:
-
-$ cd fuel/build; make all
-
-For more information on how to build, please see *Reference: 14*
-
-Booting from the ISO image
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Mount the <scenario> ISO file/media as a boot device on the jump host server. If all your hardware
-preparation is complete at this time you should reboot the jumphost to establish the deployment server.
-
-
-Additional preparations
------------------------
-.. Additional information should be provided here. it should be relatively short and informative
-.. and not drag attention away from the hardware preparation section.
-
-
-Additionally, familiarize yourself with Fuel by reading the following documents:
-
-- Fuel planning guide, please see *Reference: 8*
-
-- Fuel user guide, please see *Reference: 9*
-
-- Fuel operations guide, please see *Reference: 10*
-
-- Fuel Plugin Developers Guide, please see *Reference: 11*
-
-Prior to installation, a number of deployment specific parameters must be collected, those are:
-
-#. Provider sub-net and gateway information
-
-#. Provider VLAN information
-
-#. Provider DNS addresses
-
-#. Provider NTP addresses
-
-#. Network overlay you plan to deploy (VLAN, VXLAN, FLAT)
-
-#. How many nodes and what roles you want to deploy (Controllers, Storage, Computes)
-
-#. Monitoring options you want to deploy (Ceilometer, Syslog, etc.).
-
-#. Other options not covered in the document are available in the links above
-
-This information will be needed for the configuration procedures
-provided in this document.
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/references.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/references.rst
deleted file mode 100644
index 5cafbab6a..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/references.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-
-References
-==========
-
-OPNFV
------
-
-1) `OPNFV Home Page <http://www.opnfv.org>`_
-
-2) `OPNFV documentation- and software downloads <https://www.opnfv.org/software/download>`_
-
-OpenStack
----------
-
-3) `OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
-
-4) `OpenStack documentation <http://docs.openstack.org>`_
-
-OpenDaylight
-------------
-
-5) `OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
-
-Fuel
-----
-6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_
-
-7) `Fuel documentation overview <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/>`_
-
-8) `Fuel planning guide <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/mos-planning-guide.html>`_
-
-9) `Fuel quick start guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/quickstart-guide.html>`_
-
-10) `Fuel operations guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/operations.html>`_
-
-11) `Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>`_
-
-12) `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list>`_
-
-Fuel in OPNFV
--------------
-
-13) `OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/installation-instruction.html>`_
-
-14) `OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/build-instruction.html>`_
-
-15) `OPNFV Release Note for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/release-notes.html>`_
diff --git a/docs/userguide/abstract.rst b/docs/userguide/abstract.rst
deleted file mode 100644
index fa9b73669..000000000
--- a/docs/userguide/abstract.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Christopher Price (Ericsson AB)
-
-========
-Abstract
-========
-
-OPNFV is a collaborative project aimed at providing a variety of virtualisation
-deployments intended to host applications serving the networking and carrier industry.
-This document provides guidance and instructions for using platform features designed
-to support these applications, made available in the Brahmaputra release of OPNFV.
-
-This document is not intended to replace or replicate documentation from other open
-source projects such as OpenStack or OpenDaylight, rather highlight the features and
-capabilities delivered through the OPNFV project.
diff --git a/docs/userguide/common.platform.render.rst b/docs/userguide/common.platform.render.rst
deleted file mode 100644
index 1235c8f77..000000000
--- a/docs/userguide/common.platform.render.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Christopher Price (Ericsson AB)
-
-================================
-Using common platform components
-================================
-
-This section outlines basic usage principals and methods for some of the commonly deployed
-components of supported OPNFV scenario's in Brahmaputra.
-The subsections provide an outline of how these components are commonly used and how to address them
-in an OPNFV deployment. The components derive from autonomous upstream communities and where possible
-this guide will provide direction to the relevant documentation made available by those communities
-to better help you navigate the OPNFV deployment.
-
-Common VIM components
-=====================
-
-.. include:: ./openstack.rst
-
-Common SDN components
-=====================
-
-.. include:: ./opendaylight.rst
-.. include:: ./onos.rst
-
diff --git a/docs/userguide/feature.userguide.render.rst b/docs/userguide/feature.userguide.render.rst
deleted file mode 100644
index fa1186dc6..000000000
--- a/docs/userguide/feature.userguide.render.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Christopher Price (Ericsson AB)
-
-==========================
-Using Brahmaputra Features
-==========================
-
-The following sections of the user guide provide feature specific usage guidelines and references.
-Providing users the necessary information to leveraging the features in the platform,
-some operation in this section may refer back to the guides in the general system usage section.
-
-.. <project>/docs/userguide/featureusage.rst files will be imported below by the build script.
-
-
diff --git a/docs/userguide/feature.userguide.template.rst b/docs/userguide/feature.userguide.template.rst
deleted file mode 100644
index f133134df..000000000
--- a/docs/userguide/feature.userguide.template.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) <optionally add copywriters name>
-
-<Feature> capabilities and usage
-================================
-Describe the specific capabilities and usage for <XYZ> feature.
-
-<Feature and API usage guidelines and example>
------------------------------------------------
-Describe with examples how to use specfic features.
-
diff --git a/docs/userguide/index.rst b/docs/userguide/index.rst
index c5c369333..baa4ae072 100644
--- a/docs/userguide/index.rst
+++ b/docs/userguide/index.rst
@@ -5,18 +5,9 @@
****************
OPNFV User Guide
****************
-Colorado 1.0
-------------
.. toctree::
:maxdepth: 2
- ./abstract.rst
- ./introduction.rst
- ./common.platform.render.rst
- ./onos.rst
- ./opendaylight.rst
- ./openstack.rst
- ./feature.userguide.render.rst
- ./feature.userguide.template.rst
+ ./userguide.introduction.rst
diff --git a/docs/userguide/introduction.rst b/docs/userguide/introduction.rst
deleted file mode 100644
index c702d47bc..000000000
--- a/docs/userguide/introduction.rst
+++ /dev/null
@@ -1,65 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Christopher Price (Ericsson AB)
-
-========
-Overview
-========
-
-OPNFV provides a variety of virtual infrastructure deployments designed to
-host virtualised network functions (VNFs). This guide intends to help users of
-the platform leverage the features and capabilities delivered by the OPNFV project.
-
-OPNFV Continuous Integration builds, deploys and tests combinations of virtual
-infrastructure components in what are defined as scenarios. A scenario may include
-components such as OpenStack, OpenDaylight, OVS, KVM etc. where each scenario will
-include different source components or configurations. Scenarios are designed to
-enable specific features and capabilities in the platform that can be leveraged by the
-OPNFV user community.
-
-OPNFV Features
-==============
-
-Each OPNFV scenario provides unique features and capabilities, it is important to
-ensure you have a scenario deployed on your infrastructure that provides the right capabilities
-for your needs before working through the user guide.
-
-This user guide outlines how to work with key components and features in the platform,
-each feature description section will indicate the scenarios that provide the components
-and configurations required to use it.
-
-.. include:: ../scenario/featurematrix.rst
-
-For details on which scenarios are best for you and how to install and configure them
-on your infrastructure the
-`OPNFV Configuration Guide <http://artifacts.opnfv.org/opnfvdocs/brahmaputra/docs/configguide/index.html>`_
-provides a valuable reference.
-
-The user guide will describe how to enable and utilise features and use cases implemented and
-tested on deployed OPNFV scenarios. For details of the use cases and tests that have been run
-you should check the validation procedures section of the
-`OPNFV Configuration Guide <http://artifacts.opnfv.org/opnfvdocs/brahmaputra/docs/configguide/post-install.html>`_.
-This will provide information about the specific use cases that have been validated and are working on your deployment.
-
-General usage guidelines
-========================
-
-The user guide for OPNFV features and capabilities provide step by step instructions
-for using features that have been configured according to the installation and configuration
-instructions.
-
-This guide is structured in a manner that will provide usage instructions for each feature in its own
-section. Start by identifying the feature capability you would like to leverage, then read through
-the relevant user guide section to understand how to work with the feature.
-The combination of platform features, if available in a given scenario and not otherwise indicated,
-should operate according to the documentation.
-Dependencies between features will be highlighted in the user guide text.
-
-You may wish to use the platform in a manner that the development teams have not foreseen, or
-exercise capabilities not fully validated on the platform. If you experience issues leveraging the
-platform for the uses you have envisioned, the `OPNFV user mailing list <"mailto:opnfv-user@lists.opnfv.org">`_
-provides a mechanism to establish a dialog with the community to help you overcome any issues identified.
-
-It may be that you have identified a bug in the system, or that you are trying to execute a use case
-that has not yet been implemented. In either case it is important for OPNFV to learn about it as we are in
-essence a development project looking to ensure the required capabilities for our users are available.
diff --git a/docs/userguide/onos.rst b/docs/userguide/onos.rst
deleted file mode 100644
index 0535c3e97..000000000
--- a/docs/userguide/onos.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Christopher Price (Ericsson AB)
-
----------------
-ONOS User Guide
----------------
-
-ONOS is an SDN controller platform developed and released by the
-`ONOS project <https://www.onosproject.org>`_.
-The ONOS controller is installed and configured in OPNFV as the networking
-component of a variety of OPNFV NFVI scenarios.
-
-ONOS runs within a JVM instance and is integrated with OpenStack via a Neutron ML2
-plugin. The ONOS instance can be configured through the OpenStack Neutron interface,
-or through native ONOS tools from the OPNFV jumphost. The Brahmaputra release of
-OPNFV integrates the latest
-`ONOS 1.4 (EMU) <https://wiki.onosproject.org/display/ONOS/Download+packages+and+tutorial+VMs>`_
-release version.
-
-ONOS references
----------------
-
-For an overview of the ONOS controller, please see
-`User Guide <https://wiki.onosproject.org/display/ONOS/User's+Guide>`_. For more detailed information
-about the EMU version of ONOS, documentation is available on the
-`ONOS download page <https://wiki.onosproject.org/display/ONOS/Download+packages+and+tutorial+VMs>`_.
-
-Connecting to the ONOS instance
--------------------------------
-
-Once you are familiar with the ONOS controller and its configuration
-you will want to connect to the ONOS instance from the Jumphost.
-To do this you should open a browser on the JumpHost to the following address
-and enter the username and password:
-
- http://{Controller-VIP}:8282/index.html>
- username: karaf
- password: karaf
-
-Other methods of interacting with and configuring the controller, like the REST API
-and CLI are also available in the Brahmaputra deployment, see the
-`ONOS User Guide <https://wiki.onosproject.org/display/ONOS/User's+Guide>`_
-for more information on using those interfaces.
-
-It is important to be aware that when working directly on the ONOS controller
-the OpenStack instance will not always be aware of the changes you are making to the
-networking controller. This may result in unrecoverable inconsistencies in your deployment.
-
-If you have any questions or need further assistance, you may also direct your queries to
-`ONOSFW Forum <http://forum.onosfw.com>`
diff --git a/docs/userguide/opendaylight.rst b/docs/userguide/opendaylight.rst
deleted file mode 100644
index 4df09d03a..000000000
--- a/docs/userguide/opendaylight.rst
+++ /dev/null
@@ -1,55 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Christopher Price (Ericsson AB)
-
------------------------
-OpenDaylight User Guide
------------------------
-
-OpenDaylight is an SDN controller platform developed and released by the
-`OpenDaylight project <https://www.opendaylight.org/>`_.
-The OpenDaylight controller is installed and configured in OPNFV as the networking
-component of a variety of OPNFV NVFi scenarios using the neutron ODL device driver
-as an integration point toward OpenStack.
-
-OpenDaylight runs within a JVM and is installed in OPNFV within a container and
-integrated with OpenStack. The OpenDaylight instance can be configured through the
-OpenStack Horizon interface, or accessed directly from the OPNFV Jumphost. The
-Brahmaputra release of OPNFV integrates the latest
-`Beryllium release <https://www.opendaylight.org/downloads/>`_.
-
-OpenDaylight references
------------------------
-
-For an overview of the OpenDaylight controller a good reference is the
-`Getting Started Guide <http://go.linuxfoundation.org/l/6342/2015-06-28/2l76qt/6342/128122/bk_getting_started_guide_20150629.pdf>`_. For more detailed information
-about using the platform the `OpenDaylight User Guide <http://go.linuxfoundation.org/l/6342/2015-06-28/2l76qw/6342/128126/bk_user_guide_20150629.pdf>`_
-provides a good feature by feature reference.
-
-It is important when working on your Brahmaputra deployment to be aware of the
-configured state of the OpenDaylight controller in the scenario you have deployed,
-installing an SFC scenario will for instance configure the OpenDaylight controller
-with the required SFC Karaf features in the OpenDaylight controller. Make sure you
-read the installation and configuration guide carefully to understand the state
-of the deployed system.
-
-Connecting to the OpenDaylight instance
----------------------------------------
-
-Once you are familiar with the OpenDaylight controller and its configuration
-you will want to connect to the OpenDaylight instance from the Jumphost.
-To do this you should open a browser on the JumpHost to the following address
-and enter the username and password:
-
- http://{Controller-VIP}:8181/index.html>
- username: admin
- password: admin
-
-Other methods of interacting with and configuring the controller, like the REST API
-and CLI are also available in the Brahmaputra deployment, see the
-`OpenDaylight User Guide <http://go.linuxfoundation.org/l/6342/2015-06-28/2l76qw/6342/128126/bk_user_guide_20150629.pdf>`_
-for more information on using those interfaces.
-
-It is important to be aware that when working directly on the OpenDaylight controller
-the OpenStack instance will not always be aware of the changes you are making to the
-networking controller. This may result in unrecoverable inconsistencies in your deployment.
diff --git a/docs/userguide/openstack.rst b/docs/userguide/openstack.rst
deleted file mode 100644
index 2b8255bcf..000000000
--- a/docs/userguide/openstack.rst
+++ /dev/null
@@ -1,50 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Christopher Price (Ericsson AB)
-
---------------------------------
-Brahmaputra OpenStack User Guide
---------------------------------
-
-OpenStack is a cloud operating system developed and released by the
-`OpenStack project <https://www.openstack.org>`_. OpenStack is used in OPNFV for
-controlling pools of compute, storage, and networking resources in a Pharos
-compliant infrastructure.
-
-OpenStack is used in Brahmaputra to manage tenants (known in OpenStack as projects),
-users, services, images, flavours, and quotas across the Pharos infrastructure.
-The OpenStack interface provides the primary interface for an operational Brahmaputra
-deployment and it is from the "horizon console" that an OPNFV user will perform the
-majority of administrative and operational activities on the deployment.
-
-OpenStack references
---------------------
-
-The `OpenStack user guide <http://docs.openstack.org/user-guide>`_ provides details
-and descriptions of how to configure and interact with the OpenStack deployment. This
-guide can be used by lab engineers and operators to tune the OpenStack deployment to
-your liking.
-
-Once you have configured OpenStack to your purposes, or the Brahmaputra deployment meets
-your needs as deployed, an operator, or administrator, will find the best guidance for
-working with OpenStack in the
-`OpenStack administration guide <http://docs.openstack.org/user-guide-admin>`_.
-
-Connecting to the OpenStack instance
-------------------------------------
-
-Once familiar with the basic of working with OpenStack you will want to connect to the
-OpenStack instance via the Horizon Console. The Horizon console provide a Web based GUI
-that will allow you operate the deployment.
-To do this you should open a browser on the JumpHost to the following address
-and enter the username and password:
-
-
- http://{Controller-VIP}:80/index.html>
- username: admin
- password: admin
-
-Other methods of interacting with and configuring OpenStack,, like the REST API
-and CLI are also available in the Brahmaputra deployment, see the
-`OpenStack administration guide <http://docs.openstack.org/user-guide-admin>`_
-for more information on using those interfaces.
diff --git a/docs/userguide/userguide.introduction.rst b/docs/userguide/userguide.introduction.rst
new file mode 100644
index 000000000..1ab6b8442
--- /dev/null
+++ b/docs/userguide/userguide.introduction.rst
@@ -0,0 +1,58 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Sofia Wallin (sofia.wallin@ericssion.com)
+
+========
+Abstract
+========
+
+OPNFV is a collaborative project aimed at providing a variety of virtualization
+deployments intended to host applications serving the networking and carrier
+industry. This document provides guidance and instructions for using platform
+features designed to support these applications, made available in the OPNFV
+Colorado release.
+
+This document is not intended to replace or replicate documentation from other
+open source projects such as OpenStack or OpenDaylight, rather highlight the
+features and capabilities delivered through the OPNFV project.
+
+============
+Introduction
+============
+
+OPNFV provides a suite of scenarios, infrastructure depoyment options, which
+are able to be installed to host virtualized network functions (VNFs).
+This guide intends to help users of the platform leverage the features and
+capabilities delivered by the OPNFV project in support of these applications.
+
+OPNFV Continuous Integration builds, deploys and tests combinations of virtual
+infrastructure components in what are defined as scenarios. A scenario may
+include components such as OpenStack, OpenDaylight, OVS, KVM etc. where each
+scenario will include different source components or configurations. Scenarios
+are designed to enable specific features and capabilities in the platform that
+can be leveraged by the OPNFV user community.
+
+================
+Feature Overview
+================
+
+The following links outline the feature deliveries from the participant OPNFV
+projects in the Colorado release. Each of the participating projects provides
+detailed descriptions about the delivered features. Including use cases,
+implementation and configuration specifics on a per OPNFV project basis.
+
+The following are User Guides and assume that the reader has already some
+information about a given projects specifics and deliverables. These guides
+are intended to be used following the installation of a given OPNFV installer
+to allow a user to deploy and implement feature delivered by OPNFV.
+
+If you are unsure about the specifics of a given project, please refer to the
+OPNFV projects home page, found on http://wiki.opnfv.org, for specific details.
+
+You can find project specific usage and configuration information below:
+
+- `IPv6 user guide <http://artifacts.opnfv.org/ipv6/colorado/docs/userguide/index.html>`_
+- `Multisite user guide <http://artifacts.opnfv.org/multisite/colorado/docs/userguide/index.html>`_
+- `Domino user guide <http://artifacts.opnfv.org/domino/colorado/docs/userguide.index.html>`_
+- `Moon user guide <http://artifacts.opnfv.org/moon/colorado/docs/userguide.html>`_
+- `SDNVPN user guide <http://artifacts.opnfv.org/sdnvpn/colorado/docs/userguide/index.html>`_