Adjusted the docs repo structure for D release work

Change-Id: I9befe06c424c726e17d754bc480413b2430549ba
Signed-off-by: Sofia Wallin <sofia.wallin@ericsson.com>

1 files changed, 0 insertions, 239 deletions

diff --git a/docs/templates/installation-instructions.rst b/docs/templates/installation-instructions.rst
deleted file mode 100644
index 8c46fe9ba..000000000
--- a/docs/templates/installation-instructions.rst
+++ /dev/null
@@ -1,239 +0,0 @@
-:Authors: Jonas Bjurel (Ericsson)
-:Version: 0.1
-
-Revision: _sha1_
-
-Build date:  _date_
-
-
-================================================================
-OPNFV Installation instructions for - < Component denomination >
-================================================================
-
-Abstract
-========
-
-This document describes how to install <Component>, it's dependencies and required system resources.
-
-License
-=======
-<WORK'S NAME> (c) by <AUTHOR'S NAME>
-
-<WORK'S NAME> is licensed under a Creative Commons Attribution 4.0 International License.
-You should have received a copy of the license along with this.
-If not, see <http://creativecommons.org/licenses/by/4.0/>.
-
-
-**Contents**
-
-1   Version history
-
-2   Introduction
-
-3   Preface
-
-4   Hardware requirements
-
-5   Top of the rack (TOR) Configuration requirements
-
-6   OPNFV Software installation and deployment
-
-7   Installation health-check
-
-8   Post installation and deployment actions
-
-9   References
-
-1   Version history
-===================
-
-+--------------------+--------------------+--------------------+--------------------+
-| **Date**           | **Ver.**           | **Author**         | **Comment**        |
-|                    |                    |                    |                    |
-+--------------------+--------------------+--------------------+--------------------+
-| 2015-04-14         | 0.1.0              | Jonas Bjurel       | First draft        |
-|                    |                    |                    |                    |
-+--------------------+--------------------+--------------------+--------------------+
-|                    | 0.1.1              |                    |                    |
-|                    |                    |                    |                    |
-+--------------------+--------------------+--------------------+--------------------+
-|                    | 1.0                |                    |                    |
-|                    |                    |                    |                    |
-|                    |                    |                    |                    |
-+--------------------+--------------------+--------------------+--------------------+
-
-2   Introduction
-================
-<INTRODUCTION TO THE SCOPE AND INTENTION OF THIS DOCUMENT AS WELL AS TO THE SYSTEM TO BE INSTALLED>
-
-<EXAMPLE>:
-
-This document describes the supported software and hardware configurations for the
-Fuel OPNFV reference platform as well as providing guidelines on how to install and
-configure such reference system.
-
-Although the available installation options gives a high degree of freedom in how the system is set-up,
-with what architecture, services and features, etc., not nearly all of those permutations provides
-a OPNFV compliant reference architecture. Following the guidelines in this document ensures
-a result that is OPNFV compliant.
-
-The audience of this document is assumed to have good knowledge in network and Unix/Linux administration.
-
-3   Preface
-===========
-<DESCRIBE NEEDED PREREQUISITES, PLANNING, ETC.>
-
-<EXAMPLE>:
-
-Before starting the installation of Fuel@OPNFV, some planning must preceed.
-
-First of all, the Fuel@OPNFV .iso image needs to be retrieved,
-the Latest stable Arno release of Fuel@OPNFV can be found here: <www.opnfv.org/abc/def>
-
-Alternatively, you may build the .iso from source by cloning the opnfv/genesis git repository:
-<git clone https://<linux foundation uid>@gerrit.opnf.org/gerrit/genesis>
-Check-out the Arno release:
-<cd genesis; git checkout arno>
-Goto the fuel directory and build the .iso
-<cd fuel/build; make all>
-
-Familiarize yourself with the Fuel 6.0.1 version by reading the following documents:
-- abc <http://wiki.openstack.org/abc>
-- def <http://wiki.openstack.org/def>
-- ghi <http://wiki.openstack.org/ghi>
-
-Secondly, a number of deployment specific parameters must be collected, those are:
-
-1.     Provider sub-net and gateway information
-
-2.     Provider VLAN information
-
-3.     Provider DNS addresses
-
-4.     Provider NTP addresses
-
-This information will be needed for the configuration procedures provided in this document.
-
-4   Hardware requirements
-=========================
-<PROVIDE A LIST OF MINIMUM HARDWARE REQUIREMENTS NEEDED FOR THE INSTALL>
-
-<EXAMPLE>:
-
-Following minimum hardware requirements must be met for installation of Fuel@OPNFV:
-
-+--------------------+----------------------------------------------------+
-| **HW Aspect**      | **Requirement**                                    |
-|                    |                                                    |
-+--------------------+----------------------------------------------------+
-| **# of servers**   | Minimum 5 (3 for non redundant deployment)         |
-|                    | 1 Fuel deployment master (may be virtualized)      |
-|                    | 3(1) Controllers                                   |
-|                    | 1 Compute                                          |
-+--------------------+----------------------------------------------------+
-| **CPU**            | Minimum 1 socket x86_AMD64 Ivy bridge 1.6 GHz      |
-|                    |                                                    |
-+--------------------+----------------------------------------------------+
-| **RAM**            | Minimum 16GB/server (Depending on VNF work load)   |
-|                    |                                                    |
-+--------------------+----------------------------------------------------+
-| **Disk**           | Minimum 256GB 10kRPM spinning disks                |
-|                    |                                                    |
-+--------------------+----------------------------------------------------+
-| **NICs**           | 2(1)x10GE Niantec for Private/Public (Redundant)   |
-|                    |                                                    |
-|                    | 2(1)x10GE Niantec for SAN (Redundant)              |
-|                    |                                                    |
-|                    | 2(1)x1GE for admin (PXE) and control (RabitMQ,etc) |
-|                    |                                                    |
-+--------------------+----------------------------------------------------+
-
-5   Top of the rack (TOR) Configuration requirements
-====================================================
-<DESCRIBE NEEDED NETWORK TOPOLOGY SETUP IN THE TORs>
-
-<EXAMPLE>:
-
-The switching infrastructure provides connectivity for the OPNFV infra-structure operations as well as
-for the tenant networks (East/West) and provider connectivity (North/South bound connectivity).
-The switching connectivity can (but does not need to) be fully redundant,
-in case it and comprises a redundant 10GE switch pair for "Traffic/Payload/SAN" purposes as well as
-a 1GE switch pair for "infrastructure control-, management and administration"
-
-The switches are **not** automatically configured from the OPNFV reference platform.
-All the networks involved in the OPNFV infra-structure as well as the provider networks
-and the private tenant VLANs needs to be manually configured.
-
-This following sections guides through required black-box switch configurations.
-
-5.1 VLAN considerations and blue-print
---------------------------------------
-
-5.2 IP Address plan considerations and blue-print
--------------------------------------------------
-
-6   OPNFV Software installation and deployment
-==============================================
-<DESCRIBE THE FULL PROCEDURES FOR THE INSTALLATION OF THE OPNFV COMPONENT INSTALLATION AND DEPLOYMENT>
-
-<EXAMPLE>:
-
-This section describes the installation of the Fuel@OPNFV installation server (Fuel master)
-as well as the deployment of the full OPNFV reference platform stack across a server cluster.
-Etc.
-
-6.1 Install Fuel master
------------------------
-
-6.2 Create an OPNV (Fuel Environment)
--------------------------------------
-
-6.3 Configure the OPNFV environment
------------------------------------
-
-6.4 Deploy the OPNFV environment
---------------------------------
-
-7   Installation health-check
-=============================
-<DESCRIBE ANY MEANS TO DO VERIFY THE INTEGRITY AND HEALTHYNESS OF THE INSTALL>
-
-<EXAMPLE>:
-
-Now that the OPNFV environment has been created, and before the post installation configurations is started,
-perform a system health check from the Fuel GUI:
-
-- Select the "Health check" TAB.
-- Select all test-cases
-- And click "Run tests"
-
-All test cases except the following should pass:
-
-8  Post installation and deployment actions
-============================================
-<DESCRIBE ANY POST INSTALLATION ACTIONS/CONFIGURATIONS NEEDED>
-
-<EXAMPLE>:
-After the OPNFV deployment is completed, the following manual changes needs to be performed in order
-for the system to work according OPNFV standards.
-
-**Change host OS password:**
-Change the Host OS password by......
-
-9  References
-=============
-<PROVIDE NEEDED/USEFUL REFERENCES>
-
-<EXAMPLES>:
-
-9.1    OPNFV
--------------
-
-9.2    OpenStack
------------------
-
-9.3    OpenDaylight
---------------------
-
-9.4    Fuel
-------------