First version of release-notes template.rst

First version of installation-instruction.rst
Git out-of sync issues hopefully fixed!

JIRA:

Change-Id: I4715710bc01a05b5cdff532a438e205bb32a6336
Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>

1 files changed, 219 insertions, 0 deletions

diff --git a/docs/templates/installation-instructions.rst b/docs/templates/installation-instructions.rst
new file mode 100644
index 000000000..388907ea6
--- /dev/null
+++ b/docs/templates/installation-instructions.rst
@@ -0,0 +1,219 @@
+:Authors: Jonas Bjurel (Ericsson)
+:Version: 0.1
+
+================================================================
+OPNFV Installation instructions for - < Component denomination >
+================================================================
+
+Abstract
+========
+
+This document describes how to install <Component>, it's dependencies and required system resources.
+
+License
+=======
+<WORK'S NAME> (c) by <AUTHOR'S NAME>
+
+<WORK'S NAME> is licensed under a Creative Commons Attribution 4.0 Unported License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+
+
+**Contents**
+
+1   Version history
+
+2   Introduction
+
+3   Preface
+
+4   Hardware requirements
+
+5   Top of the rack (TOR) Configuration requirements
+
+6   OPNFV Software installation and deployment
+
+7   Installation health-check
+
+8   Post installation and deployment actions
+
+9   References
+
+1   Version history
+===================
+
++--------------------+--------------------+--------------------+--------------------+
+| **Date**           | **Ver.**           | **Author**         | **Comment**        |
+|                    |                    |                    |                    |
++--------------------+--------------------+--------------------+--------------------+
+| 2015-04-14         | 0.1.0              | Jonas Bjurel       | First draft        |
+|                    |                    |                    |                    |
++--------------------+--------------------+--------------------+--------------------+
+|                    | 0.1.1              |                    |                    |
+|                    |                    |                    |                    |
++--------------------+--------------------+--------------------+--------------------+
+|                    | 1.0                |                    |                    |
+|                    |                    |                    |                    |
+|                    |                    |                    |                    |
++--------------------+--------------------+--------------------+--------------------+
+
+2   Introduction
+================
+<INTRODUCTION TO THE SCOPE AND INTENTION OF THIS DOCUMENT AS WELL AS TO THE SYSTEM TO BE INSTALLED>
+
+<EXAMPLE>:
+
+This document describes the supported software and hardware configurations for the Fuel OPNFV reference platform as well as providing guidelines on how to install and
+configure such reference system.
+
+Although the available installation options gives a high degree of freedom in how the system is set-up, with what architecture, services and features, etc., not nearly all of those permutations provides a OPNFV compliant reference architecture. Following the guidelines in this document ensures
+a result that is OPNFV compliant.
+
+The audience of this document is assumed to have good knowledge in network and Unix/Linux administration.
+
+3   Preface
+===========
+<DESCRIBE NEEDED PREREQUISITES, PLANNING, ETC.>
+
+<EXAMPLE>:
+
+Before starting the installation of Fuel@OPNFV, some planning must preceed.
+
+First of all, the Fuel@OPNFV .iso image needs to be retrieved, the Latest stable Arno release of Fuel@OPNFV can be found here: <www.opnfv.org/abc/def>
+
+Alternatively, you may build the .iso from source by cloning the opnfv/genesis git repository:
+<git clone https://<linux foundation uid>@gerrit.opnf.org/gerrit/genesis>
+Check-out the Arno release:
+<cd genesis; git checkout arno>
+Goto the fuel directory and build the .iso
+<cd fuel/build; make all>
+
+Familiarize yourself with the Fuel 6.0.1 version by reading the following documents:
+- abc <http://wiki.openstack.org/abc>
+- def <http://wiki.openstack.org/def>
+- ghi <http://wiki.openstack.org/ghi>
+
+Secondly, a number of deployment specific parameters must be collected, those are:
+
+1.     Provider sub-net and gateway information
+
+2.     Provider VLAN information
+
+3.     Provider DNS addresses
+
+4.     Provider NTP addresses
+
+This information will be needed for the configuration procedures provided in this document.
+
+4   Hardware requirements
+=========================
+<PROVIDE A LIST OF MINIMUM HARDWARE REQUIREMENTS NEEDED FOR THE INSTALL>
+
+<EXAMPLE>:
+
+Following minimum hardware requirements must be met for installation of Fuel@OPNFV:
+
++--------------------+----------------------------------------------------+
+| **HW Aspect**      | **Requirement**                                    |
+|                    |                                                    |
++--------------------+----------------------------------------------------+
+| **# of servers**   | Minimum 5 (3 for non redundant deployment)         |
+|                    | 1 Fuel deployment master (may be virtualized)      |
+|                    | 3(1) Controllers                                   |
+|                    | 1 Compute                                          |
++--------------------+----------------------------------------------------+
+| **CPU**            | Minimum 1 socket x86_AMD64 Ivy bridge 1.6 GHz      |
+|                    |                                                    |
++--------------------+----------------------------------------------------+
+| **RAM**            | Minimum 16GB/server (Depending on VNF work load)   |
+|                    |                                                    |
++--------------------+----------------------------------------------------+
+| **Disk**           | Minimum 256GB 10kRPM spinning disks                |
+|                    |                                                    |
++--------------------+----------------------------------------------------+
+| **NICs**           | 2(1)x10GE Niantec for Private/Public (Redundant)   |
+|                    |                                                    |
+|                    | 2(1)x10GE Niantec for SAN (Redundant)              |
+|                    |                                                    |
+|                    | 2(1)x1GE for admin (PXE) and control (RabitMQ,etc) |
+|                    |                                                    |
++--------------------+----------------------------------------------------+
+
+5   Top of the rack (TOR) Configuration requirements
+====================================================
+<DESCRIBE NEEDED NETWORK TOPOLOGY SETUP IN THE TORs>
+
+<EXAMPLE>:
+
+The switching infrastructure provides connectivity for the OPNFV infra-structure operations as well as for the tenant networks (East/West) and provider connectivity (North/South bound connectivity). The switching connectivity can (but does not need to) be fully redundant, in case it and comprises a redundant 10GE switch pair for “Traffic/Payload/SAN” purposes as well as a 1GE switch pair for “infrastructure control-, management and administration”
+
+The switches are **not** automatically configured from the OPNFV reference platform. All the networks involved in the OPNFV infra-structure as well as the provider networks and the private tenant VLANs needs to be manually configured.
+
+This following sections guides through required black-box switch configurations.
+
+5.1 VLAN considerations and blue-print
+--------------------------------------
+
+5.2 IP Address plan considerations and blue-print
+-------------------------------------------------
+
+6   OPNFV Software installation and deployment
+==============================================
+<DESCRIBE THE FULL PROCEDURES FOR THE INSTALLATION OF THE OPNFV COMPONENT INSTALLATION AND DEPLOYMENT>
+
+<EXAMPLE>:
+
+This section describes the installation of the Fuel@OPNFV installation server (Fuel master) as well as the deployment of the full OPNFV reference platform stack across a server cluster.
+Etc.
+
+6.1 Install Fuel master
+-----------------------
+
+6.2 Create an OPNV (Fuel Environment)
+-------------------------------------
+
+6.3 Configure the OPNFV environment
+-----------------------------------
+
+6.4 Deploy the OPNFV environment
+--------------------------------
+
+7   Installation health-check
+============================
+<DESCRIBE ANY MEANS TO DO VERIFY THE INTEGRITY AND HEALTHYNESS OF THE INSTALL>
+
+<EXAMPLE>:
+
+Now that the OPNFV environment has been created, and before the post installation configurations is started, perform a system health check from the Fuel GUI:
+
+- Select the “Health check” TAB.
+- Select all test-cases
+- And click “Run tests”
+
+All test cases except the following should pass:
+
+8  Post installation and deployment actions
+============================================
+<DESCRIBE ANY POST INSTALLATION ACTIONS/CONFIGURATIONS NEEDED>
+
+<EXAMPLE>:
+After the OPNFV deployment is completed, the following manual changes needs to be performed in order for the system to work according OPNFV standards.
+
+**Change host OS password:**
+Change the Host OS password by......
+
+9  References
+=============
+<PROVIDE NEEDED/USEFUL REFERENCES>
+
+<EXAMPLES>:
+
+9.1    OPNFV
+-------------
+
+9.2    OpenStack
+-----------------
+
+9.3    OpenDaylight
+--------------------
+
+9.4    Fuel
+------------
\ No newline at end of file