summaryrefslogtreecommitdiffstats
path: root/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
diff options
context:
space:
mode:
authorSofia Wallin <sofia.wallin@ericsson.com>2016-08-15 15:20:50 +0200
committerSofia Wallin <sofia.wallin@ericsson.com>2016-09-19 14:37:59 +0200
commite042f556c6c25858f328cb6287c164b2514a2561 (patch)
tree2e0a495f29d608e88602299116ea6c90cfabb9ce /docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
parent15d5bdf0756bf3faa28558d4effd7611f1767146 (diff)
WIP: Created 2 introduction documents for user guide and installation
Work on the contant in both installation and user guide Started to add artifacts in the installation instruction and user guide This is a first draft of the installation.introduction.rst and userguide.introduction.rst. Some of the information has been reused from the Brahmaputra docs with modifications. Please comment and add as needed/wanted. Change-Id: I0c6d79aac7d1152ec894986dda251ad2d3c7048e Signed-off-by: Sofia Wallin <sofia.wallin@ericsson.com>
Diffstat (limited to 'docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst')
-rw-r--r--docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst155
1 files changed, 0 insertions, 155 deletions
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
deleted file mode 100644
index bcfb6d5de..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
+++ /dev/null
@@ -1,155 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-<scenario> software installation and deployment
-===============================================
-
-.. Let's figure out how to structure this to highlight both virtual and
-.. bare metal deployments. I need some help from the scenrio owners to get
-.. that right.
-
-This section describes the installation of the OPNFV installation
-server (jumphost) as well as the deployment of the <scenario> OPNFV
-reference platform stack across a server cluster.
-
-Install jumphost
-----------------
-
-If you have not already done so, prepare your jumphost according the instructions in _#ref_Preparation
-this can be done using an ISO image with the following commands
-
-#. Mount the <scenario> ISO file/media as a boot device to the jump host server.
-
-#. Reboot the jump host to establish the jumphost server.
-
- - The system now boots from the ISO image.
-
- - Select "Fuel Install (Static IP)"
-
- - Press [Enter].
-
-#. Wait until screen Fuel setup is shown (Note: This can take up to 30 minutes).
-
-At this time you can continue with the installation according to the following instructions.
-
-#. In the "Fuel User" section - Confirm/change the default password
-
- - Enter "admin" in the Fuel password input
-
- - Enter "admin" in the Confirm password input
-
- - Select "Check" and press [Enter]
-
-#. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network.
-
- - Configure eth1 or other network interfaces here as well (if you have them present on your FUEL server).
-
-#. In the "PXE Setup" section - Change the following fields to appropriate values (example below):
-
- - DHCP Pool Start 10.20.0.3
-
- - DHCP Pool End 10.20.0.254
-
- - DHCP Pool Gateway 10.20.0.2 (IP address of Fuel node)
-
-#. In the "DNS & Hostname" section - Change the following fields to appropriate values:
-
- - Hostname
-
- - Domain
-
- - Search Domain
-
- - External DNS
-
- - Hostname to test DNS
-
- - Select <Check> and press [Enter]
-
-
-#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section, edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support)
-
- - Navigate to "HTTP proxy" and enter your http proxy address
-
- - Select <Check> and press [Enter]
-
-#. In the "Time Sync" section - Change the following fields to appropriate values:
-
- - NTP Server 1 <Customer NTP server 1>
-
- - NTP Server 2 <Customer NTP server 2>
-
- - NTP Server 3 <Customer NTP server 3>
-
-#. Start the installation.
-
- - Select Quit Setup and press Save and Quit.
-
- - Installation starts, wait until the login screen is shown.
-
-
-Boot the Node Servers
----------------------
-
-After the Fuel Master node has rebooted from the above steps and is at
-the login prompt, you should boot the Node Servers (Your
-Compute/Control/Storage blades (nested or real) with a PXE booting
-scheme so that the FUEL Master can pick them up for control.
-
-#. Enable PXE booting
-
- - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu and hard disk as the second boot device in the same menu.
-
-#. Reboot all the control and compute blades.
-
-#. Wait for the availability of nodes showing up in the Fuel GUI.
-
- - Connect to the FUEL UI via the URL provided in the Console (default: https://10.20.0.2:8443)
-
- - Wait until all nodes are displayed in top right corner of the Fuel GUI: Total nodes and Unallocated nodes.
-
-
-Install additional Plugins/Features on the FUEL node
-----------------------------------------------------
-
-#. SSH to your FUEL node (e.g. root@10.20.0.2 pwd: r00tme)
-
-#. Select wanted plugins/features from the /opt/opnfv/ directory.
-
-#. Install the wanted plugin with the command "fuel plugins --install /opt/opnfv/<plugin-name>-<version>.<arch>.rpm"
- Expected output: "Plugin ....... was successfully installed."
-
-Create an OpenStack Environment
--------------------------------
-
-#. Connect to Fuel WEB UI with a browser (default: https://10.20.0.2:8443) (login admin/admin)
-
-#. Create and name a new OpenStack environment, to be installed.
-
-#. Select "<Liberty on Ubuntu 14.04>" and press <Next>
-
-#. Select "compute virtulization method".
-
- - Select "QEMU-KVM as hypervisor" and press <Next>
-
-#. Select "network mode".
-
- - Select "Neutron with ML2 plugin"
-
- - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins)
-
- - Press <Next>
-
-#. Select "Storage Back-ends".
-
- - Select "Ceph for block storage" and press <Next>
-
-#. Select "additional services" you wish to install.
-
- - Check option "Install Ceilometer (OpenStack Telemetry)" and press <Next>
-
-#. Create the new environment.
-
- - Click <Create> Button
-