diff options
author | 2016-08-15 15:20:50 +0200 | |
---|---|---|
committer | 2016-09-19 14:37:59 +0200 | |
commit | e042f556c6c25858f328cb6287c164b2514a2561 (patch) | |
tree | 2e0a495f29d608e88602299116ea6c90cfabb9ce /docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst | |
parent | 15d5bdf0756bf3faa28558d4effd7611f1767146 (diff) |
WIP: Created 2 introduction documents for user guide and installation
Work on the contant in both installation and user guide
Started to add artifacts in the installation instruction and user guide
This is a first draft of the installation.introduction.rst and userguide.introduction.rst.
Some of the information has been reused from the Brahmaputra docs with modifications.
Please comment and add as needed/wanted.
Change-Id: I0c6d79aac7d1152ec894986dda251ad2d3c7048e
Signed-off-by: Sofia Wallin <sofia.wallin@ericsson.com>
Diffstat (limited to 'docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst')
-rw-r--r-- | docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst | 73 |
1 files changed, 0 insertions, 73 deletions
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst deleted file mode 100644 index ed9eaf8d2..000000000 --- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst +++ /dev/null @@ -1,73 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. .. http://creativecommons.org/licenses/by/4.0 .. -.. (c) Christopher Price (Ericsson AB) and others - - -OPTIONAL - Set Local Mirror Repos ---------------------------------- - -The following steps can be executed if you are in an environment with -no connection to the Internet. The Fuel server delivers a local repo -that can be used for installation / deployment of openstack. - -#. In the Fuel UI of your Environment, click the Settings Tab and select General from the left pane. - - - Replace the URI values for the "Name" values outlined below: - - - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main" - - - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-security main" - - - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main" - - - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted" - - - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted" - - - Click <Save Settings> at the bottom to Save your changes - -Target specific configuration ------------------------------ - -#. Set up targets for provisioning with non-default "Offloading Modes" - - Some target nodes may require additional configuration after they are - PXE booted (bootstrapped); the most frequent changes are in defaults - for ethernet devices' "Offloading Modes" settings (e.g. some targets' - ethernet drivers may strip VLAN traffic by default). - - If your target ethernet drivers have wrong "Offloading Modes" defaults, - in "Configure interfaces" page (described above), expand affected - interface's "Offloading Modes" and [un]check the relevant settings: - -#. Set up targets for "Verify Networks" with non-default "Offloading Modes" - - **NOTE**: Check *Reference 15* for an updated and comprehensive list of - known issues and/or limitations, including "Offloading Modes" not being - applied during "Verify Networks" step. - - Setting custom "Offloading Modes" in Fuel GUI will only apply those settings - during provisioning and **not** during "Verify Networks", so if your targets - need this change, you have to apply "Offloading Modes" settings by hand - to bootstrapped nodes. - - **E.g.**: Our driver has "rx-vlan-filter" default "on" (expected "off") on - the openstack interface(s) "eth1", preventing VLAN traffic from passing - during "Verify Networks". - - - From Fuel master console identify target nodes admin IPs: - - .. code-block:: bash - - $ fuel nodes - - - - SSH into each of the target nodes and disable "rx-vlan-filter" on the - affected physical interface(s) allocated for OpenStack traffic (eth1): - - .. code-block:: bash - - $ ssh root@10.20.0.6 ethtool -K eth1 rx-vlan-filter off - - - Repeat the step above for all affected nodes/interfaces in the POD. - |