WIP: Created 2 introduction documents for user guide and installation

Work on the contant in both installation and user guide

Started to add artifacts in the installation instruction  and user guide

This is a first draft of the installation.introduction.rst and userguide.introduction.rst.
Some of the information has been reused from the Brahmaputra docs with  modifications.
Please comment and add as needed/wanted.

Change-Id: I0c6d79aac7d1152ec894986dda251ad2d3c7048e
Signed-off-by: Sofia Wallin <sofia.wallin@ericsson.com>

1 files changed, 0 insertions, 156 deletions

diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst
deleted file mode 100644
index 17200d5c2..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst
+++ /dev/null
@@ -1,156 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License. .. http://creativecommons.org/licenses/by/4.0 ..
-.. (c) Christopher Price (Ericsson AB) and others
-
-Configure the network environment
----------------------------------
-
-#. Open the environment you previously created.
-
-#. Open the networks tab and select the "default Node Networks group to" on the left pane.
-
-#. Update the Public network configuration and change the following fields to appropriate values:
-
-   - CIDR to <CIDR for Public IP Addresses>
-
-   - IP Range Start to <Public IP Address start>
-
-   - IP Range End to <Public IP Address end>
-
-   - Gateway to <Gateway for Public IP Addresses>
-
-   - Check <VLAN tagging>.
-
-   - Set appropriate VLAN id.
-
-#. Update the Storage Network Configuration
-
-   - Set CIDR to appropriate value  (default 192.168.1.0/24)
-
-   - Set IP Range Start to appropriate value (default 192.168.1.1)
-
-   - Set IP Range End to appropriate value (default 192.168.1.254)
-
-   - Set vlan to appropriate value  (default 102)
-
-#. Update the Management network configuration.
-
-   - Set CIDR to appropriate value (default 192.168.0.0/24)
-
-   - Set IP Range Start to appropriate value (default 192.168.0.1)
-
-   - Set IP Range End to appropriate value (default 192.168.0.254)
-
-   - Check <VLAN tagging>.
-
-   - Set appropriate VLAN id. (default 101)
-
-#. Update the Private Network Information
-
-   - Set CIDR to appropriate value (default 192.168.2.0/24
-
-   - Set IP Range Start to appropriate value (default 192.168.2.1)
-
-   - Set IP Range End to appropriate value (default 192.168.2.254)
-
-   - Check <VLAN tagging>.
-
-   - Set appropriate VLAN tag (default 103)
-
-#. Select the "Neutron L3 Node Networks group" on the left pane.
-
-#. Update the Floating Network configuration.
-
-   - Set the Floating IP range start (default 172.16.0.130)
-
-   - Set the Floating IP range end (default 172.16.0.254)
-
-   - Set the Floating network name (default admin_floating_net)
-
-#. Update the Internal Network configuration.
-
-   - Set Internal network CIDR to an appropriate value (default 192.168.111.0/24)
-
-   - Set Internal network gateway to an appropriate value
-
-   - Set the Internal network name (default admin_internal_net)
-
-#. Update the Guest OS DNS servers.
-
-   - Set Guest OS DNS Server values appropriately
-
-#. Save Settings.
-
-#. Select the "Other Node Networks group" on the left pane.
-
-#. Update the Public network assignment.
-
-   - Check the box for "Assign public network to all nodes" (Required by OpenDaylight)
-
-#. Update Host OS DNS Servers.
-
-   - Provide the DNS server settings
-
-#. Update Host OS NTP Servers.
-
-   - Provide the NTP server settings
-
-Select Hypervisor type
-----------------------
-
-#. In the FUEL UI of your Environment, click the "Settings" Tab
-
-#. Select Compute on the left side pane
-
-   - Check the KVM box and press "Save settings"
-
-Enable Plugins
---------------
-
-#. In the FUEL UI of your Environment, click the "Settings" Tab
-
-#. Select Other on the left side pane
-
-   - Enable and configure the plugins of your choice
-
-Allocate nodes to environment and assign functional roles
----------------------------------------------------------
-
-#. Click on the "Nodes" Tab in the FUEL WEB UI.
-
-#. Assign roles.
-
-    - Click on the <+Add Nodes> button
-
-    - Check <Controller>, <Telemetry - MongoDB>  and optionally an SDN Controller role (OpenDaylight controller/ONOS) in the Assign Roles Section.
-
-    - Check one node which you want to act as a Controller from the bottom half of the screen
-
-    - Click <Apply Changes>.
-
-    - Click on the <+Add Nodes> button
-
-    - Check the <Controller> and <Storage - Ceph OSD> roles.
-
-    - Check the two next nodes you want to act as Controllers from the bottom half of the screen
-
-    - Click <Apply Changes>
-
-    - Click on <+Add Nodes> button
-
-    - Check the <Compute> and <Storage - Ceph OSD> roles.
-
-    - Check the Nodes you want to act as Computes from the bottom half of the screen
-
-    - Click <Apply Changes>.
-
-#. Configure interfaces.
-
-    - Check Select <All> to select all allocated nodes
-
-    - Click <Configure Interfaces>
-
-    - Assign interfaces (bonded) for mgmt-, admin-, private-, public-
-      and storage networks
-
-    - Click <Apply>