diff options
Diffstat (limited to 'framework/src/suricata/configure.ac')
| -rw-r--r-- | framework/src/suricata/configure.ac | 1907 |
1 files changed, 0 insertions, 1907 deletions
diff --git a/framework/src/suricata/configure.ac b/framework/src/suricata/configure.ac deleted file mode 100644 index f3d20a1f..00000000 --- a/framework/src/suricata/configure.ac +++ /dev/null @@ -1,1907 +0,0 @@ - AC_INIT(suricata, 3.0dev) - m4_ifndef([AM_SILENT_RULES], [m4_define([AM_SILENT_RULES],[])])AM_SILENT_RULES([yes]) - AC_CONFIG_HEADERS([config.h]) - AC_CONFIG_SRCDIR([src/suricata.c]) - AC_CONFIG_MACRO_DIR(m4) - AM_INIT_AUTOMAKE - - AC_LANG_C - AC_PROG_CC_C99 - AC_PROG_LIBTOOL - PKG_PROG_PKG_CONFIG(0.21) # 0.21 is the CentOS 5.11 version - - AC_DEFUN([FAIL_MESSAGE],[ - echo - echo - echo "**********************************************" - echo " ERROR: unable to find" $1 - echo " checked in the following places" - for i in `echo $2`; do - echo " $i" - done - echo "**********************************************" - echo - exit 1 - ]) - - AC_DEFUN([LIBNET_FAIL_WARN],[ - echo - echo "*************************************************************************" - echo " Warning! libnet version 1.1.x could not be found in " $1 - echo " Reject keywords will not be supported." - echo " If you require reject support, please install libnet 1.1.x. " - echo " If libnet is not installed in a non-standard location please use the" - echo " --with-libnet-includes and --with-libnet-libraries configure options" - echo "*************************************************************************" - echo - ]) - - dnl Taken from https://llvm.org/svn/llvm-project/llvm/trunk/autoconf/configure.ac - dnl check if we compile using clang or gcc. On some systems the gcc binary is - dnl is actually clang, so do a compile test. - AC_MSG_CHECKING([whether GCC or Clang is our compiler]) - AC_LANG_PUSH([C]) - compiler=unknown - AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#if ! __clang__ - #error - #endif - ]])], - compiler=clang, - [AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#if ! __GNUC__ - #error - #endif - ]])], - compiler=gcc, [])]) - AC_LANG_POP([C]) - AC_MSG_RESULT([${compiler}]) - - case "$compiler" in - clang) - CLANG_CFLAGS="-Wextra -Werror-implicit-function-declaration" - AC_MSG_CHECKING([clang __sync_bool_compare_and_swap support]) - AC_TRY_COMPILE([#include <stdio.h>], - [ unsigned int i = 0; (void)__sync_bool_compare_and_swap(&i, 1, 1);], - [ - AC_DEFINE([__GCC_HAVE_SYNC_COMPARE_AND_SWAP_1], [1], [Fake GCC atomic support]) - AC_DEFINE([__GCC_HAVE_SYNC_COMPARE_AND_SWAP_2], [1], [Fake GCC atomic support]) - AC_DEFINE([__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4], [1], [Fake GCC atomic support]) - AC_DEFINE([__GCC_HAVE_SYNC_COMPARE_AND_SWAP_8], [1], [Fake GCC atomic support]) - AC_MSG_RESULT([yes]) ], - [AC_MSG_RESULT([no])]) - AC_SUBST(CLANG_CFLAGS) - ;; - gcc) - dnl get gcc version - AC_MSG_CHECKING([gcc version]) - gccver=$($CC -dumpversion) - gccvermajor=$(echo $gccver | cut -d . -f1) - gccverminor=$(echo $gccver | cut -d . -f2) - gccvernum=$(expr $gccvermajor "*" 100 + $gccverminor) - AC_MSG_RESULT($gccver) - - if test "$gccvernum" -ge "400"; then - dnl gcc 4.0 or later - GCC_CFLAGS="-Wextra -Werror-implicit-function-declaration" - # remove optimization options that break our code - # VJ 2010/06/27: no-tree-pre added. It breaks ringbuffers code. - GCC_CFLAGS="$GCC_CFLAGS -fno-tree-pre" - else - GCC_CFLAGS="-W" - fi - AC_SUBST(GCC_CFLAGS) - ;; - *) - AC_MSG_WARN([unsupported/untested compiler, this may or may not work]) - ;; - esac - - # Checks for programs. - AC_PROG_AWK - AC_PROG_CC - AC_PROG_CPP - AC_PROG_INSTALL - AC_PROG_LN_S - AC_PROG_MAKE_SET - - AC_PATH_PROG(HAVE_PKG_CONFIG, pkg-config, "no") - if test "$HAVE_PKG_CONFIG" = "no"; then - echo - echo " ERROR! pkg-config not found, go get it " - echo " http://pkg-config.freedesktop.org/wiki/ " - echo " or install from your distribution " - echo - exit 1 - fi - - AC_PATH_PROG(HAVE_PYTHON_CONFIG, python, "no") - if test "$HAVE_PYTHON_CONFIG" = "no"; then - echo - echo " Warning! python not found, you will not be " - echo " able to install surictasc unix socket client " - echo - enable_python="no" - else - enable_python="yes" - fi - AM_CONDITIONAL([HAVE_PYTHON], [test "$HAVE_PYTHON_CONFIG" != "no"]) - - AC_PATH_PROG(HAVE_WGET, wget, "no") - if test "$HAVE_WGET" = "no"; then - AC_PATH_PROG(HAVE_CURL, curl, "no") - if test "$HAVE_CURL" = "no"; then - echo - echo " Warning curl or wget not found, you won't be able to" - echo " download latest ruleset with 'make install-rules'" - fi - fi - AM_CONDITIONAL([HAVE_FETCH_COMMAND], [test "x$HAVE_WGET" != "xno" || test "x$HAVE_CURL" != "xno"]) - AM_CONDITIONAL([HAVE_WGET_COMMAND], [test "x$HAVE_WGET" != "xno"]) - - # Checks for libraries. - - # Checks for header files. - AC_CHECK_HEADERS([arpa/inet.h assert.h ctype.h errno.h fcntl.h inttypes.h]) - AC_CHECK_HEADERS([getopt.h]) - AC_CHECK_HEADERS([limits.h netdb.h netinet/in.h poll.h sched.h signal.h]) - AC_CHECK_HEADERS([stdarg.h stdint.h stdio.h stdlib.h string.h sys/ioctl.h]) - AC_CHECK_HEADERS([syslog.h sys/prctl.h sys/socket.h sys/stat.h sys/syscall.h]) - AC_CHECK_HEADERS([sys/time.h time.h unistd.h]) - AC_CHECK_HEADERS([sys/ioctl.h linux/if_ether.h linux/if_packet.h linux/filter.h]) - AC_CHECK_HEADERS([linux/ethtool.h linux/sockios.h]) - AC_CHECK_HEADER(glob.h,,[AC_ERROR(glob.h not found ...)]) - - AC_CHECK_HEADERS([sys/socket.h net/if.h sys/mman.h linux/if_arp.h], [], [], - [[#ifdef HAVE_SYS_SOCKET_H - #include <sys/types.h> - #include <sys/socket.h> - #endif - ]]) - - AC_CHECK_HEADERS([windows.h winsock2.h ws2tcpip.h w32api/wtypes.h], [], [], - [[ - #ifndef _X86_ - #define _X86_ - #endif - ]]) - AC_CHECK_HEADERS([w32api/winbase.h], [], [], - [[ - #ifndef _X86_ - #define _X86_ - #endif - #include <windows.h> - ]]) - - # Checks for typedefs, structures, and compiler characteristics. - AC_C_INLINE - AC_TYPE_PID_T - AC_TYPE_SIZE_T - AC_TYPE_INT32_T - AC_TYPE_UINT16_T - AC_TYPE_UINT32_T - AC_TYPE_UINT64_T - AC_TYPE_UINT8_T - AC_HEADER_STDBOOL - - # Checks for library functions. - AC_FUNC_MALLOC - AC_FUNC_REALLOC - AC_CHECK_FUNCS([gettimeofday memset strcasecmp strchr strdup strerror strncasecmp strtol strtoul memchr memrchr]) - - OCFLAGS=$CFLAGS - CFLAGS="" - AC_CHECK_FUNCS([strlcpy strlcat]) - CFLAGS=$OCFLAGS - - # Add large file support - AC_SYS_LARGEFILE - - #check for os - AC_MSG_CHECKING([host os]) - - # lua pkg-config name differs per OS - LUA_PC_NAME="lua5.1" - LUA_LIB_NAME="lua5.1" - - # If no host os was detected, try with uname - if test -z "$host" ; then - host="`uname`" - fi - echo -n "installation for $host OS... " - - e_magic_file="/usr/share/file/magic" - case "$host" in - *-*-*freebsd*) - LUA_PC_NAME="lua-5.1" - LUA_LIB_NAME="lua-5.1" - CFLAGS="${CFLAGS} -DOS_FREEBSD" - CPPFLAGS="${CPPFLAGS} -I/usr/local/include -I/usr/local/include/libnet11" - LDFLAGS="${LDFLAGS} -L/usr/local/lib -L/usr/local/lib/libnet11" - e_magic_file="/usr/share/misc/magic" - ;; - *-*-openbsd*) - LUA_PC_NAME="lua51" - CFLAGS="${CFLAGS} -D__OpenBSD__" - CPPFLAGS="${CPPFLAGS} -I/usr/local/include -I/usr/local/include/libnet-1.1" - LDFLAGS="${LDFLAGS} -L/usr/local/lib -I/usr/local/lib/libnet-1.1" - e_magic_file="/usr/local/share/misc/magic.mgc" - ;; - *darwin*|*Darwin*) - LUA_PC_NAME="lua-5.1" - LUA_LIB_NAME="lua-5.1" - CFLAGS="${CFLAGS} -DOS_DARWIN" - CPPFLAGS="${CPPFLAGS} -I/opt/local/include" - LDFLAGS="${LDFLAGS} -L/opt/local/lib" - ;; - *-*-linux*) - #for now do nothing - ;; - *-*-mingw32*) - CFLAGS="${CFLAGS} -DOS_WIN32" - LDFLAGS="${LDFLAGS} -lws2_32" - WINDOWS_PATH="yes" - ;; - *-*-cygwin) - LUA_PC_NAME="lua" - LUA_LIB_NAME="lua" - WINDOWS_PATH="yes" - ;; - *) - AC_MSG_WARN([unsupported OS this may or may not work]) - ;; - esac - AC_MSG_RESULT(ok) - - # disable TLS on user request - AC_ARG_ENABLE(threading-tls, - AS_HELP_STRING([--disable-threading-tls], [Disable TLS (thread local storage)])], [enable_tls="$enableval"],[enable_tls=yes]) - AS_IF([test "x$enable_tls" = "xyes"], [ - # check if our target supports thread local storage - AC_MSG_CHECKING(for thread local storage __thread support) - AC_TRY_COMPILE([#include <stdlib.h>], - [ static __thread int i; i = 1; i++; ], - [AC_DEFINE([TLS], [1], [Thread local storage]) - AC_MSG_RESULT([yes]) ], - [AC_MSG_RESULT([no])]) - ]) - - #Enable support for gcc compile time security options. There is no great way to do detection of valid cflags that I have found - #AX_CFLAGS_GCC_OPTION don't seem to do a better job than the code below and are a pain because of extra m4 files etc. - #These flags seem to be supported on CentOS 5+, Ubuntu 8.04+, and FedoreCore 11+ - #Options are taken from https://wiki.ubuntu.com/CompilerFlags - AC_ARG_ENABLE(gccprotect, - AS_HELP_STRING([--enable-gccprotect], [Detect and use gcc hardening options]),,[enable_gccprotect=no]) - - AS_IF([test "x$enable_gccprotect" = "xyes"], [ - #buffer overflow protection - AC_MSG_CHECKING(for -fstack-protector) - TMPCFLAGS="${CFLAGS}" - CFLAGS="${CFLAGS} -fstack-protector" - AC_TRY_LINK(,,SECCFLAGS="-fstack-protector" - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no)) - CFLAGS="${TMPCFLAGS}" - - #compile-time best-practices errors for certain libc functions, provides checks of buffer lengths and memory regions - AC_MSG_CHECKING(for -D_FORTIFY_SOURCE=2) - TMPCFLAGS="${CFLAGS}" - CFLAGS="${CFLAGS} -D_FORTIFY_SOURCE=2" - AC_TRY_COMPILE(,,SECCFLAGS="${SECCFLAGS} -D_FORTIFY_SOURCE=2" - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no)) - CFLAGS="${TMPCFLAGS}" - - #compile-time warnings about misuse of format strings - AC_MSG_CHECKING(for -Wformat -Wformat-security) - TMPCFLAGS="${CFLAGS}" - CFLAGS="${CFLAGS} -Wformat -Wformat-security" - AC_TRY_COMPILE(,,SECCFLAGS="${SECCFLAGS} -Wformat -Wformat-security" - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no)) - CFLAGS="${TMPCFLAGS}" - - #provides a read-only relocation table area in the final ELF - AC_MSG_CHECKING(for -z relro) - TMPLDFLAGS="${LDFLAGS}" - LDFLAGS="${LDFLAGS} -z relro" - AC_TRY_LINK(,,SECLDFLAGS="${SECLDFLAGS} -z relro" - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no)) - LDFLAGS="${TMPLDFLAGS}" - - #forces all relocations to be resolved at run-time - AC_MSG_CHECKING(for -z now) - TMPLDFLAGS="${LDFLAGS}" - LDFLAGS="${LDFLAGS} -z now" - AC_TRY_LINK(,,SECLDFLAGS="${SECLDFLAGS} -z now" - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no)) - LDFLAGS="${TMPLDFLAGS}" - - AC_SUBST(SECCFLAGS) - AC_SUBST(SECLDFLAGS) - ]) - - #enable profile generation - AC_ARG_ENABLE(gccprofile, - AS_HELP_STRING([--enable-gccprofile], [Enable gcc profile info i.e -pg flag is set]),,[enable_gccprofile=no]) - AS_IF([test "x$enable_gccprofile" = "xyes"], [ - CFLAGS="${CFLAGS} -pg" - ]) - - #enable gcc march=native gcc 4.2 or later - AC_ARG_ENABLE(gccmarch_native, - AS_HELP_STRING([--enable-gccmarch-native], [Enable gcc march=native gcc 4.2 and later only]),,[enable_gccmarch_native=yes]) - AS_IF([test "x$enable_gccmarch_native" = "xyes"], [ - OFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -march=native" - AC_MSG_CHECKING([checking if $CC supports -march=native]) - AC_COMPILE_IFELSE( [AC_LANG_PROGRAM([[#include <stdlib.h>]])], - [ - AC_MSG_RESULT([yes]) - OPTIMIZATION_CFLAGS="-march=native" - AC_SUBST(OPTIMIZATION_CFLAGS) - ], - [ - AC_MSG_RESULT([no]) - CFLAGS="$OFLAGS" - enable_gccmarch_native=no - ] - ) - ]) - -# options - - # enable the running of unit tests - AC_ARG_ENABLE(unittests, - AS_HELP_STRING([--enable-unittests], [Enable compilation of the unit tests]),,[enable_unittests=no]) - AS_IF([test "x$enable_unittests" = "xyes"], [ - AC_DEFINE([UNITTESTS],[1],[Enable built-in unittests]) - ]) - AM_CONDITIONAL([BUILD_UNITTESTS], [test "x$enable_unittests" = "xyes"]) - - # enable workaround for old barnyard2 for unified alert output - AC_ARG_ENABLE(old-barnyard2, - AS_HELP_STRING([--enable-old-barnyard2], [Use workaround for old barnyard2 in unified2 output]),,[enable_old_barnyard2=no]) - AS_IF([test "x$enable_old_barnyard2" = "xyes"], [ - AC_DEFINE([HAVE_OLD_BARNYARD2],[1],[Use workaround for old barnyard2 in unified2 output]) - ]) - - # enable debug output - AC_ARG_ENABLE(debug, - AS_HELP_STRING([--enable-debug], [Enable debug output]),,[enable_debug=no]) - AS_IF([test "x$enable_debug" = "xyes"], [ - AC_DEFINE([DEBUG],[1],[Enable debug output]) - ]) - AM_CONDITIONAL([DEBUG], [test "x$enable_debug" = "xyes"]) - - # enable debug validation functions & macro's output - AC_ARG_ENABLE(debug-validation, - AS_HELP_STRING([--enable-debug-validation], [Enable (debug) validation code output]),,[enable_debug_validation=no]) - AS_IF([test "x$enable_debug_validation" = "xyes"], [ - AC_DEFINE([DEBUG_VALIDATION],[1],[Enable (debug) validation code output]) - ]) - - # profiling support - AC_ARG_ENABLE(profiling, - AS_HELP_STRING([--enable-profiling], [Enable performance profiling]),,[enable_profiling=no]) - AS_IF([test "x$enable_profiling" = "xyes"], [ - case "$host" in - *-*-openbsd*) - AC_MSG_ERROR([profiling is not supported on OpenBSD]) - ;; - *) - AC_DEFINE([PROFILING],[1],[Enable performance profiling]) - ;; - esac - ]) - - # profiling support, locking - AC_ARG_ENABLE(profiling-locks, - AS_HELP_STRING([--enable-profiling-locks], [Enable performance profiling for locks]),,[enable_profiling_locks=no]) - AS_IF([test "x$enable_profiling_locks" = "xyes"], [ - AC_DEFINE([PROFILING],[1],[Enable performance profiling]) - AC_DEFINE([PROFILE_LOCKING],[1],[Enable performance profiling for locks]) - ]) - - # enable support for IPFW - AC_ARG_ENABLE(ipfw, - AS_HELP_STRING([--enable-ipfw], [Enable FreeBSD IPFW support for inline IDP]),,[enable_ipfw=no]) - AS_IF([test "x$enable_ipfw" = "xyes"], [ - AC_DEFINE([IPFW],[1],[Enable FreeBSD IPFW support for inline IDP]) - ]) - - AC_ARG_ENABLE(coccinelle, - AS_HELP_STRING([--disable-coccinelle], [Disable coccinelle QA steps during make check])],[enable_coccinelle="$enableval"],[enable_coccinelle=yes]) - AS_IF([test "x$enable_coccinelle" = "xyes"], [ - AC_PATH_PROG(HAVE_COCCINELLE_CONFIG, spatch, "no") - if test "$HAVE_COCCINELLE_CONFIG" = "no"; then - echo " Warning! spatch not found, you will not be " - echo " able to run code checking with coccinelle " - echo " get it from http://coccinelle.lip6.fr " - echo " or install from your distribution " - enable_coccinelle=no - fi - ]) - AM_CONDITIONAL([HAVE_COCCINELLE], [test "x$enable_coccinelle" != "xno"]) - - # disable detection - AC_ARG_ENABLE(detection, - AS_HELP_STRING([--disable-detection], [Disable Detection Modules])], [enable_detection="$enableval"],[enable_detection=yes]) - AS_IF([test "x$enable_detection" = "xno"], [ - AC_DEFINE([HAVE_DETECT_DISABLED], [1], [Detection is disabled]) - ]) - - # Tilera PCIE logging - AM_CONDITIONAL([BUILD_PCIE_LOGGING], [test ! -z "$TILERA_ROOT"]) - -# libraries - - AC_MSG_CHECKING([for Mpipe]) - AC_COMPILE_IFELSE( - [AC_LANG_PROGRAM([[#include <gxio/mpipe.h>]])], - [ - AC_MSG_RESULT([yes]) - AC_DEFINE([HAVE_MPIPE],[1],[mPIPE support is available]) - LDFLAGS="$LDFLAGS -lgxpci -lgxio -ltmc" - ], - [AC_MSG_RESULT([no])]) - - #libpcre - AC_ARG_WITH(libpcre_includes, - [ --with-libpcre-includes=DIR libpcre include directory], - [with_libpcre_includes="$withval"],[with_libpcre_includes=no]) - AC_ARG_WITH(libpcre_libraries, - [ --with-libpcre-libraries=DIR libpcre library directory], - [with_libpcre_libraries="$withval"],[with_libpcre_libraries="no"]) - - if test "$with_libpcre_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libpcre_includes}" - fi - AC_CHECK_HEADER(pcre.h,,[AC_ERROR(pcre.h not found ...)]) - - if test "$with_libpcre_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libpcre_libraries}" - fi - PCRE="" - AC_CHECK_LIB(pcre, pcre_get_substring,, PCRE="no",-lpthread) - if test "$PCRE" = "no"; then - echo - echo " ERROR! pcre library not found, go get it" - echo " from www.pcre.org." - echo - exit 1 - fi - - # To prevent duping the lib link we reset LIBS after this check. Setting action-if-found to NULL doesn't seem to work - # see: http://blog.flameeyes.eu/2008/04/29/i-consider-ac_check_lib-harmful - PCRE="" - TMPLIBS="${LIBS}" - AC_CHECK_LIB(pcre, pcre_dfa_exec,, PCRE="no") - if test "$PCRE" = "no"; then - echo - echo " ERROR! pcre library was found but version was < 6.0" - echo " please upgrade to a newer version of pcre which you can get from" - echo " www.pcre.org." - echo - exit 1 - fi - LIBS="${TMPLIBS}" - - AC_TRY_COMPILE([ #include <pcre.h> ], - [ int eo = 0; eo |= PCRE_EXTRA_MATCH_LIMIT_RECURSION; ], - [ pcre_match_limit_recursion_available=yes ], [:] - ) - if test "$pcre_match_limit_recursion_available" != "yes"; then - echo - echo " Warning! pcre extra opt PCRE_EXTRA_MATCH_LIMIT_RECURSION not found" - echo " This could lead to potential DoS please upgrade to pcre >= 6.5" - echo " from www.pcre.org." - echo " Continuing for now...." - echo - AC_DEFINE([NO_PCRE_MATCH_RLIMIT],[1],[Pcre PCRE_EXTRA_MATCH_LIMIT_RECURSION not available]) - fi - - TMPCFLAGS="${CFLAGS}" - CFLAGS="-O0 -g -Werror -Wall" - AC_TRY_COMPILE([ #include <pcre.h> ], - [ pcre_extra *extra = NULL; pcre_free_study(extra); ], - [ AC_DEFINE([HAVE_PCRE_FREE_STUDY], [1], [Pcre pcre_free_study supported])], [:] - ) - CFLAGS="${TMPCFLAGS}" - - #enable support for PCRE-jit available since pcre-8.20 - AC_MSG_CHECKING(for PCRE JIT support) - AC_TRY_COMPILE([ #include <pcre.h> ], - [ - int jit = 0; - pcre_config(PCRE_CONFIG_JIT, &jit); - ], - [ pcre_jit_available=yes ], [ pcre_jit_available=no ] - ) - - if test "x$pcre_jit_available" = "xyes"; then - AC_MSG_RESULT(yes) - AC_DEFINE([PCRE_HAVE_JIT], [1], [Pcre with JIT compiler support enabled]) - - AC_MSG_CHECKING(for PCRE JIT support usability) - AC_TRY_COMPILE([ #include <pcre.h> ], - [ - const char* regexstr = "(a|b|c|d)"; - pcre *re; - const char *error; - pcre_extra *extra; - int err_offset; - re = pcre_compile(regexstr,0, &error, &err_offset,NULL); - extra = pcre_study(re, PCRE_STUDY_JIT_COMPILE, &error); - if (extra == NULL) - exit(EXIT_FAILURE); - int jit = 0; - int ret = pcre_fullinfo(re, extra, PCRE_INFO_JIT, &jit); - if (ret != 0 || jit != 1) - exit(EXIT_FAILURE); - exit(EXIT_SUCCESS); - ], - [ pcre_jit_works=yes ], [:] - ) - if test "x$pcre_jit_works" != "xyes"; then - AC_MSG_RESULT(no) - echo - echo " PCRE JIT support detection worked but testing it failed" - echo " something odd is going on, please file a bug report." - echo - exit 1 - else - AC_MSG_RESULT(yes) - fi - else - AC_MSG_RESULT(no) - fi - - # libyaml - AC_ARG_WITH(libyaml_includes, - [ --with-libyaml-includes=DIR libyaml include directory], - [with_libyaml_includes="$withval"],[with_libyaml_includes=no]) - AC_ARG_WITH(libyaml_libraries, - [ --with-libyaml-libraries=DIR libyaml library directory], - [with_libyaml_libraries="$withval"],[with_libyaml_libraries="no"]) - - if test "$with_libyaml_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libyaml_includes}" - fi - - AC_CHECK_HEADER(yaml.h,,LIBYAML="no") - - if test "$with_libyaml_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libyaml_libraries}" - fi - - LIBYAML="" - AC_CHECK_LIB(yaml,yaml_parser_initialize,,LIBYAML="no") - - if test "$LIBYAML" = "no"; then - echo - echo " ERROR! libyaml library not found, go get it" - echo " from http://pyyaml.org/wiki/LibYAML " - echo " or your distribution:" - echo - echo " Ubuntu: apt-get install libyaml-dev" - echo " Fedora: yum install libyaml-devel" - echo - exit 1 - fi - - # libpthread - AC_ARG_WITH(libpthread_includes, - [ --with-libpthread-includes=DIR libpthread include directory], - [with_libpthread_includes="$withval"],[with_libpthread_includes=no]) - AC_ARG_WITH(libpthread_libraries, - [ --with-libpthread-libraries=DIR libpthread library directory], - [with_libpthread_libraries="$withval"],[with_libpthread_libraries="no"]) - - if test "$with_libpthread_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libpthread_includes}" - fi - - dnl AC_CHECK_HEADER(pthread.h,,[AC_ERROR(pthread.h not found ...)]) - - if test "$with_libpthread_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libpthread_libraries}" - fi - - PTHREAD="" - AC_CHECK_LIB(pthread, pthread_create,, PTHREAD="no") - - if test "$PTHREAD" = "no"; then - echo - echo " ERROR! libpthread library not found, glibc problem?" - echo - exit 1 - fi - - # libjansson - enable_jansson="no" - AC_ARG_WITH(libjansson_includes, - [ --with-libjansson-includes=DIR libjansson include directory], - [with_libjansson_includes="$withval"],[with_libjansson_includes=no]) - AC_ARG_WITH(libjansson_libraries, - [ --with-libjansson-libraries=DIR libjansson library directory], - [with_libjansson_libraries="$withval"],[with_libjansson_libraries="no"]) - - if test "$with_libjansson_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libjansson_includes}" - fi - - enable_jansson="no" - enable_unixsocket="no" - - AC_ARG_ENABLE(unix-socket, - AS_HELP_STRING([--enable-unix-socket], [Enable unix socket [default=test]]),[enable_unixsocket="$enableval"],[enable_unixsocket=test]) - - AC_CHECK_HEADER(jansson.h,JANSSON="yes",JANSSON="no") - if test "$JANSSON" = "yes"; then - if test "$with_libjansson_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libjansson_libraries}" - fi - - AC_CHECK_LIB(jansson, json_dump_callback,, JANSSON="no") - enable_jansson="yes" - if test "$JANSSON" = "no"; then - echo - echo " Jansson >= 2.2 is required for features like unix socket" - echo " Go get it from your distribution or from:" - echo " http://www.digip.org/jansson/" - echo - if test "x$enable_unixsocket" = "xyes"; then - exit 1 - fi - enable_unixsocket="no" - enable_jansson="no" - else - case $host in - *-*-mingw32*) - ;; - *-*-cygwin) - ;; - *) - if test "x$enable_unixsocket" = "xtest"; then - enable_unixsocket="yes" - fi - ;; - esac - fi - else - if test "x$enable_unixsocket" = "xyes"; then - echo - echo " Jansson >= 2.2 is required for features like unix socket" - echo " Go get it from your distribution or from:" - echo " http://www.digip.org/jansson/" - echo - exit 1 - fi - enable_unixsocket="no" - fi - - AS_IF([test "x$enable_unixsocket" = "xyes"], [AC_DEFINE([BUILD_UNIX_SOCKET], [1], [Unix socket support enabled])]) - - AC_ARG_ENABLE(nflog, - AS_HELP_STRING([--enable-nflog],[Enable libnetfilter_log support]), - [ enable_nflog="yes"], - [ enable_nflog="no"]) - AC_ARG_ENABLE(nfqueue, - AS_HELP_STRING([--enable-nfqueue], [Enable NFQUEUE support for inline IDP]),[enable_nfqueue=yes],[enable_nfqueue=no]) - - if test "x$enable_nflog" = "xyes" || test "x$enable_nfqueue" = "xyes"; then - # libnfnetlink - case $host in - *-*-mingw32*) - ;; - *) - AC_ARG_WITH(libnfnetlink_includes, - [ --with-libnfnetlink-includes=DIR libnfnetlink include directory], - [with_libnfnetlink_includes="$withval"],[with_libnfnetlink_includes=no]) - AC_ARG_WITH(libnfnetlink_libraries, - [ --with-libnfnetlink-libraries=DIR libnfnetlink library directory], - [with_libnfnetlink_libraries="$withval"],[with_libnfnetlink_libraries="no"]) - - if test "$with_libnfnetlink_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libnfnetlink_includes}" - fi - - if test "$with_libnfnetlink_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libnfnetlink_libraries}" - fi - - NFNL="" - AC_CHECK_LIB(nfnetlink, nfnl_fd,, NFNL="no") - - if test "$NFNL" = "no"; then - echo - echo " ERROR! nfnetlink library not found, go get it" - echo " from www.netfilter.org." - echo " we automatically append libnetfilter_queue/ when searching" - echo " for headers etc. when the --with-libnfnetlink-includes directive" - echo " is used" - echo - fi - ;; - esac - fi - - # enable support for NFQUEUE - AS_IF([test "x$enable_nfqueue" = "xyes"], [ - AC_DEFINE_UNQUOTED([NFQ],[1],[Enable Linux Netfilter NFQUEUE support for inline IDP]) - - #libnetfilter_queue - AC_ARG_WITH(libnetfilter_queue_includes, - [ --with-libnetfilter_queue-includes=DIR libnetfilter_queue include directory], - [with_libnetfilter_queue_includes="$withval"],[with_libnetfilter_queue_includes=no]) - AC_ARG_WITH(libnetfilter_queue_libraries, - [ --with-libnetfilter_queue-libraries=DIR libnetfilter_queue library directory], - [with_libnetfilter_queue_libraries="$withval"],[with_libnetfilter_queue_libraries="no"]) - - if test "$with_libnetfilter_queue_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libnetfilter_queue_includes}" - fi - - AC_CHECK_HEADER(libnetfilter_queue/libnetfilter_queue.h,,[AC_ERROR(libnetfilter_queue/libnetfilter_queue.h not found ...)]) - - if test "$with_libnetfilter_queue_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libnetfilter_queue_libraries}" - fi - - #LDFLAGS="${LDFLAGS} -lnetfilter_queue" - - NFQ="" - case $host in - *-*-mingw32*) - AC_CHECK_LIB(netfilter_queue, nfq_open,, NFQ="no",-lws2_32) - - AC_ARG_WITH(netfilterforwin_includes, - [ --with-netfilterforwin-includes=DIR netfilterforwin include directory], - [with_netfilterforwin_includes="$withval"],[with_netfilterforwin_includes=no]) - - if test "$with_netfilterforwin_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_netfilterforwin_includes}" - else - CPPFLAGS="${CPPFLAGS} -I../../netfilterforwin" - fi - ;; - *) - AC_CHECK_LIB(netfilter_queue, nfq_open,, NFQ="no",) - AC_CHECK_LIB([netfilter_queue], [nfq_set_queue_maxlen],AC_DEFINE_UNQUOTED([HAVE_NFQ_MAXLEN],[1],[Found queue max length support in netfilter_queue]) ,,[-lnfnetlink]) - AC_CHECK_LIB([netfilter_queue], [nfq_set_verdict2],AC_DEFINE_UNQUOTED([HAVE_NFQ_SET_VERDICT2],[1],[Found nfq_set_verdict2 function in netfilter_queue]) ,,[-lnfnetlink]) - AC_CHECK_LIB([netfilter_queue], [nfq_set_queue_flags],AC_DEFINE_UNQUOTED([HAVE_NFQ_SET_QUEUE_FLAGS],[1],[Found nfq_set_queue_flags function in netfilter_queue]) ,,[-lnfnetlink]) - AC_CHECK_LIB([netfilter_queue], [nfq_set_verdict_batch],AC_DEFINE_UNQUOTED([HAVE_NFQ_SET_VERDICT_BATCH],[1],[Found nfq_set_verdict_batch function in netfilter_queue]) ,,[-lnfnetlink]) - - # check if the argument to nfq_get_payload is signed or unsigned - AC_MSG_CHECKING([for signed nfq_get_payload payload argument]) - STORECFLAGS="${CFLAGS}" - if test `basename $CC` = "clang"; then - CFLAGS="${CFLAGS} -Werror=incompatible-pointer-types" - else - CFLAGS="${CFLAGS} -Werror" - fi - AC_COMPILE_IFELSE( - [AC_LANG_PROGRAM( - [ - #include <stdio.h> - #include <libnetfilter_queue/libnetfilter_queue.h> - ], - [ - char *pktdata; - nfq_get_payload(NULL, &pktdata); - ])], - [libnetfilter_queue_nfq_get_payload_signed="yes"], - [libnetfilter_queue_nfq_get_payload_signed="no"]) - AC_MSG_RESULT($libnetfilter_queue_nfq_get_payload_signed) - if test "x$libnetfilter_queue_nfq_get_payload_signed" = "xyes"; then - AC_DEFINE([NFQ_GET_PAYLOAD_SIGNED], [1], [For signed version of nfq_get_payload]) - fi - CFLAGS="${STORECFLAGS}" - ;; - esac - - if test "$NFQ" = "no"; then - echo - echo " ERROR! libnetfilter_queue library not found, go get it" - echo " from www.netfilter.org." - echo " we automatically append libnetfilter_queue/ when searching" - echo " for headers etc. when the --with-libnfq-includes directive" - echo " is used" - echo - exit 1 - fi - ]) - - # libnetfilter_log - AC_ARG_WITH(libnetfilter_log_includes, - [ --with-libnetfilter_log-includes=DIR libnetfilter_log include directory], - [with_libnetfilter_log_includes="$withval"],[with_libnetfilter_log_includes="no"]) - AC_ARG_WITH(libnetfilter_log_libraries, - [ --with-libnetfilter_log-libraries=DIR libnetfilter_log library directory], - [with_libnetfilter_log_libraries="$withval"],[with_libnetfilter_log_libraries="no"]) - - if test "$enable_nflog" = "yes"; then - if test "$with_libnetfilter_log_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libnetfilter_log_includes}" - fi - - AC_CHECK_HEADER(libnetfilter_log/libnetfilter_log.h,,[AC_ERROR(libnetfilter_log.h not found ...)]) - - if test "$with_libnetfilter_log_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libnetfilter_log_libraries}" - fi - - NFLOG="" - AC_CHECK_LIB(netfilter_log, nflog_open,, NFLOG="no") - - if test "$NFLOG" = "no"; then - echo - echo " ERROR! libnetfilter_log library not found, go get it" - echo " from http://www.netfilter.org." - echo - exit 1 - else - AC_DEFINE([HAVE_NFLOG],[1],[nflog available]) - enable_nflog="yes" - fi - fi - - # prelude - AC_ARG_ENABLE(prelude, - AS_HELP_STRING([--enable-prelude], [Enable Prelude support for alerts]),,[enable_prelude=no]) - # Prelude doesn't work with -Werror - STORECFLAGS="${CFLAGS}" - CFLAGS="${CFLAGS} -Wno-error=unused-result" - - AS_IF([test "x$enable_prelude" = "xyes"], [ - AM_PATH_LIBPRELUDE(0.9.9, , AC_MSG_ERROR(Cannot find libprelude: Is libprelude-config in the path?), no) - if test "x${LIBPRELUDE_CFLAGS}" != "x"; then - CPPFLAGS="${CPPFLAGS} ${LIBPRELUDE_CFLAGS}" - fi - - if test "x${LIBPRELUDE_LDFLAGS}" != "x"; then - LDFLAGS="${LDFLAGS} ${LIBPRELUDE_LDFLAGS}" - fi - - if test "x${LIBPRELUDE_LIBS}" != "x"; then - LDFLAGS="${LDFLAGS} ${LIBPRELUDE_LIBS}" - fi - AC_DEFINE([PRELUDE], [1], [Libprelude support enabled]) - ]) - CFLAGS="${STORECFLAGS}" - - - # libnet - AC_ARG_WITH(libnet_includes, - [ --with-libnet-includes=DIR libnet include directory], - [with_libnet_includes="$withval"],[with_libnet_includes="no"]) - - AC_ARG_WITH(libnet_libraries, - [ --with-libnet-libraries=DIR libnet library directory], - [with_libnet_libraries="$withval"],[with_libnet_libraries="no"]) - - if test "x$with_libnet_includes" != "xno"; then - CPPFLAGS="${CPPFLAGS} -I${with_libnet_includes}" - libnet_dir="${with_libnet_includes}" - else - libnet_dir="/usr/include /usr/local/include /usr/local/include/libnet11 /opt/local/include /usr/local/include/libnet-1.1" - fi - - if test "x$with_libnet_libraries" != "xno"; then - LDFLAGS="${LDFLAGS} -L${with_libnet_libraries}" - fi - - LIBNET_DETECT_FAIL="no" - LIBNET_INC_DIR="" - - for i in $libnet_dir; do - if test -r "$i/libnet.h"; then - LIBNET_INC_DIR="$i" - fi - done - - AC_MSG_CHECKING(for libnet.h version 1.1.x) - if test "$LIBNET_INC_DIR" != ""; then - if eval "grep LIBNET_VERSION $LIBNET_INC_DIR/libnet.h | grep -v '1.[[12]]' >/dev/null"; then - AC_MSG_RESULT(no) - LIBNET_DETECT_FAIL="yes" - LIBNET_FAIL_WARN($libnet_dir) - else - AC_MSG_RESULT(yes) - fi - - #CentOS, Fedora, Ubuntu-LTS, Ubuntu all set defines to the same values. libnet-config seems - #to have been depreciated but all distro's seem to include it as part of the package. - if test "$LIBNET_DETECT_FAIL" = "no"; then - LLIBNET="" - AC_CHECK_LIB(net, libnet_write,, LLIBNET="no") - if test "$LLIBNET" != "no"; then - AC_DEFINE([HAVE_LIBNET11],[1],(libnet 1.1 available)) - AC_DEFINE([_DEFAULT_SOURCE],[1],(default source)) - AC_DEFINE([_BSD_SOURCE],[1],(bsd source)) - AC_DEFINE([__BSD_SOURCE],[1],(bsd source)) - AC_DEFINE([__FAVOR_BSD],[1],(favor bsd)) - AC_DEFINE([HAVE_NET_ETHERNET_H],[1],(ethernet.h)) - else - #if we displayed a warning already no reason to do it again. - if test "$LIBNET_DETECT_FAIL" = "no"; then - LIBNET_DETECT_FAIL="yes" - LIBNET_FAIL_WARN($libnet_dir) - fi - fi - - # see if we have the patched libnet 1.1 - # http://www.inliniac.net/blog/2007/10/16/libnet-11-ipv6-fixes-and-additions.html - # - # To prevent duping the lib link we reset LIBS after this check. Setting action-if-found to NULL doesn't seem to work - # see: http://blog.flameeyes.eu/2008/04/29/i-consider-ac_check_lib-harmful - if test "$LIBNET_DETECT_FAIL" = "no"; then - LLIBNET="" - TMPLIBS="${LIBS}" - AC_CHECK_LIB(net, libnet_build_icmpv6_unreach,, LLIBNET="no") - if test "$LLIBNET" != "no"; then - AC_DEFINE([HAVE_LIBNET_ICMPV6_UNREACH],[1],(libnet_build_icmpv6_unreach available)) - fi - LIBS="${TMPLIBS}" - fi - fi - else - LIBNET_DETECT_FAIL="yes" - LIBNET_FAIL_WARN($libnet_dir) - fi - - # libpcap - AC_ARG_WITH(libpcap_includes, - [ --with-libpcap-includes=DIR libpcap include directory], - [with_libpcap_includes="$withval"],[with_libpcap_includes=no]) - AC_ARG_WITH(libpcap_libraries, - [ --with-libpcap-libraries=DIR libpcap library directory], - [with_libpcap_libraries="$withval"],[with_libpcap_libraries="no"]) - - if test "$with_libpcap_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libpcap_includes}" - fi - - AC_CHECK_HEADER(pcap.h,,[AC_ERROR(pcap.h not found ...)]) - - if test "$with_libpcap_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libpcap_libraries}" - fi - AC_CHECK_HEADERS([pcap.h pcap/pcap.h pcap/bpf.h]) - - LIBPCAP="" - AC_CHECK_LIB(pcap, pcap_open_live,, LIBPCAP="no", [-lpthread]) - if test "$LIBPCAP" = "no"; then - echo - echo " ERROR! libpcap library not found, go get it" - echo " from http://www.tcpdump.org or your distribution:" - echo - echo " Ubuntu: apt-get install libpcap-dev" - echo " Fedora: yum install libpcap-devel" - echo - exit 1 - fi - - # pcap_activate and pcap_create only exists in libpcap >= 1.0 - LIBPCAPVTEST="" - #To prevent duping the lib link we reset LIBS after this check. Setting action-if-found to NULL doesn't seem to work - #see: http://blog.flameeyes.eu/2008/04/29/i-consider-ac_check_lib-harmful - TMPLIBS="${LIBS}" - AC_CHECK_LIB(pcap, pcap_activate,, LPCAPVTEST="no") - if test "$LPCAPVTEST" != "no"; then - AC_PATH_PROG(HAVE_PCAP_CONFIG, pcap-config, "no") - if test "$HAVE_PCAP_CONFIG" = "no" -o "$cross_compiling" = "yes"; then - AC_DEFINE([LIBPCAP_VERSION_MAJOR],[1],(libpcap version 1.0+)) - else - PCAP_CFLAGS="$(pcap-config --defines) $(pcap-config --cflags)" - AC_SUBST(PCAP_CFLAGS) - AC_DEFINE([LIBPCAP_VERSION_MAJOR],[1],(libpcap version 1.0+)) - fi - else - AC_DEFINE([LIBPCAP_VERSION_MAJOR],[0],(libpcap version 0.x)) - fi - LIBS="${TMPLIBS}" - - #Appears as if pcap_set_buffer_size is linux only? - LIBPCAPSBUFF="" - #To prevent duping the lib link we reset LIBS after this check. Setting action-if-found to NULL doesn't seem to work - #see: http://blog.flameeyes.eu/2008/04/29/i-consider-ac_check_lib-harmful - TMPLIBS="${LIBS}" - AC_CHECK_LIB(pcap, pcap_set_buffer_size,, LPCAPSBUFF="no") - if test "$LPCAPSBUFF" != "no"; then - AC_DEFINE([HAVE_PCAP_SET_BUFF],[1],(libpcap has pcap_set_buffer_size function)) - fi - LIBS="${TMPLIBS}" - - # libpfring - # libpfring (currently only supported for libpcap enabled pfring) - # Error on the side of caution. If libpfring enabled pcap is being used and we don't link against -lpfring compilation will fail. - AC_ARG_ENABLE(pfring, - AS_HELP_STRING([--enable-pfring], [Enable Native PF_RING support]),,[enable_pfring=no]) - AS_IF([test "x$enable_pfring" = "xyes"], [ - AC_DEFINE([HAVE_PFRING],[1],(PF_RING support enabled)) - - #We have to set CFLAGS for AC_TRY_COMPILE as it doesn't pay attention to CPPFLAGS - AC_ARG_WITH(libpfring_includes, - [ --with-libpfring-includes=DIR libpfring include directory], - [with_libpfring_includes="$withval"],[with_libpfring_includes=no]) - AC_ARG_WITH(libpfring_libraries, - [ --with-libpfring-libraries=DIR libpfring library directory], - [with_libpfring_libraries="$withval"],[with_libpfring_libraries="no"]) - - if test "$with_libpfring_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libpfring_includes}" - fi - - if test "$with_libpfring_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libpfring_libraries}" - fi - - LIBPFRING="" - AC_CHECK_LIB(pfring, pfring_open,, LIBPFRING="no", [-lpcap]) - if test "$LIBPFRING" != "no"; then - STORECFLAGS="${CFLAGS}" - CFLAGS="${CFLAGS} -Werror" - AC_COMPILE_IFELSE( - [AC_LANG_PROGRAM( - [ - #include <pfring.h> - ], - [ - pfring_recv_chunk(NULL, NULL, 0, 0); - ])], - [pfring_recv_chunk="yes"], - [pfring_recv_chunk="no"]) - CFLAGS="${STORECFLAGS}" - if test "x$pfring_recv_chunk" != "xyes"; then - if test "x$enable_pfring" = "xyes"; then - echo - echo " ERROR! --enable-pfring was passed but the library version is < 6, go get it" - echo " from http://www.ntop.org/products/pf_ring/" - echo - exit 1 - fi - else - LIBS="${LIBS} -lrt -lnuma" - fi - else - if test "x$enable_pfring" = "xyes"; then - echo - echo " ERROR! --enable-pfring was passed but the library was not found, go get it" - echo " from http://www.ntop.org/products/pf_ring/" - echo - exit 1 - fi - fi - ]) - - # AF_PACKET support - AC_ARG_ENABLE(af-packet, - AS_HELP_STRING([--enable-af-packet], [Enable AF_PACKET support [default=yes]]), - ,[enable_af_packet=yes]) - AS_IF([test "x$enable_af_packet" = "xyes"], [ - AC_CHECK_DECL([TPACKET_V2], - AC_DEFINE([HAVE_AF_PACKET],[1],[AF_PACKET support is available]), - [enable_af_packet="no"], - [[#include <sys/socket.h> - #include <linux/if_packet.h>]]) - AC_CHECK_DECL([PACKET_FANOUT_QM], - AC_DEFINE([HAVE_PACKET_FANOUT],[1],[Recent packet fanout support is available]), - [], - [[#include <linux/if_packet.h>]]) - ]) - - # Netmap support - AC_ARG_ENABLE(netmap, - AS_HELP_STRING([--enable-netmap], [Enable Netmap support]),,[enable_netmap=no]) - AC_ARG_WITH(netmap_includes, - [ --with-netmap-includes=DIR netmap include directory], - [with_netmap_includes="$withval"],[with_netmap_includes=no]) - - AS_IF([test "x$enable_netmap" = "xyes"], [ - AC_DEFINE([HAVE_NETMAP],[1],(NETMAP support enabled)) - - if test "$with_netmap_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_netmap_includes}" - fi - - AC_CHECK_HEADER(net/netmap_user.h,,[AC_ERROR(net/netmap_user.h not found ...)],) - ]) - - # libhtp - AC_ARG_ENABLE(non-bundled-htp, - AS_HELP_STRING([--enable-non-bundled-htp], [Enable the use of an already installed version of htp]),,[enable_non_bundled_htp=no]) - AS_IF([test "x$enable_non_bundled_htp" = "xyes"], [ - PKG_CHECK_MODULES([libhtp], htp,, [with_pkgconfig_htp=no]) - if test "$with_pkgconfig_htp" != "no"; then - CPPFLAGS="${CPPFLAGS} ${libhtp_CFLAGS}" - LIBS="${LIBS} ${libhtp_LIBS}" - fi - - AC_ARG_WITH(libhtp_includes, - [ --with-libhtp-includes=DIR libhtp include directory], - [with_libhtp_includes="$withval"],[with_libhtp_includes=no]) - AC_ARG_WITH(libhtp_libraries, - [ --with-libhtp-libraries=DIR libhtp library directory], - [with_libhtp_libraries="$withval"],[with_libhtp_libraries="no"]) - - if test "$with_libhtp_includes" != "no"; then - CPPFLAGS="-I${with_libhtp_includes} ${CPPFLAGS}" - fi - - if test "$with_libhtp_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libhtp_libraries}" - fi - - AC_CHECK_HEADER(htp/htp.h,,[AC_ERROR(htp/htp.h not found ...)]) - - LIBHTP="" - AC_CHECK_LIB(htp, htp_conn_create,, LIBHTP="no") - if test "$LIBHTP" = "no"; then - echo - echo " ERROR! libhtp library not found" - echo - exit 1 - fi - PKG_CHECK_MODULES(LIBHTPMINVERSION, [htp >= 0.5.5],[libhtp_minver_found="yes"],[libhtp_minver_found="no"]) - if test "$libhtp_minver_found" = "no"; then - PKG_CHECK_MODULES(LIBHTPDEVVERSION, [htp = 0.5.X],[libhtp_devver_found="yes"],[libhtp_devver_found="no"]) - if test "$libhtp_devver_found" = "no"; then - echo - echo " ERROR! libhtp was found but it is neither >= 0.5.5, nor the dev 0.5.X" - echo - exit 1 - fi - fi - - AC_CHECK_LIB([htp], [htp_config_register_request_uri_normalize],AC_DEFINE_UNQUOTED([HAVE_HTP_URI_NORMALIZE_HOOK],[1],[Found htp_config_register_request_uri_normalize function in libhtp]) ,,[-lhtp]) - # check for htp_tx_get_response_headers_raw - AC_CHECK_LIB([htp], [htp_tx_get_response_headers_raw],AC_DEFINE_UNQUOTED([HAVE_HTP_TX_GET_RESPONSE_HEADERS_RAW],[1],[Found htp_tx_get_response_headers_raw in libhtp]) ,,[-lhtp]) - AC_CHECK_LIB([htp], [htp_decode_query_inplace],AC_DEFINE_UNQUOTED([HAVE_HTP_DECODE_QUERY_INPLACE],[1],[Found htp_decode_query_inplace function in libhtp]) ,,[-lhtp]) - AC_EGREP_HEADER(htp_config_set_path_decode_u_encoding, htp/htp.h, AC_DEFINE_UNQUOTED([HAVE_HTP_SET_PATH_DECODE_U_ENCODING],[1],[Found usable htp_config_set_path_decode_u_encoding function in libhtp]) ) - ]) - - if test "x$enable_non_bundled_htp" = "xno"; then - # test if we have a bundled htp - if test -d "$srcdir/libhtp"; then - AC_CONFIG_SUBDIRS([libhtp]) - HTP_DIR="libhtp" - AC_SUBST(HTP_DIR) - HTP_LDADD="../libhtp/htp/libhtp.la" - AC_SUBST(HTP_LDADD) - # make sure libhtp is added to the includes - CPPFLAGS="-I${srcdir}/../libhtp/ ${CPPFLAGS}" - - AC_CHECK_HEADER(iconv.h,,[AC_ERROR(iconv.h not found ...)]) - AC_CHECK_LIB(iconv, libiconv_close) - AC_DEFINE_UNQUOTED([HAVE_HTP_URI_NORMALIZE_HOOK],[1],[Assuming htp_config_register_request_uri_normalize function in bundled libhtp]) - AC_DEFINE_UNQUOTED([HAVE_HTP_TX_GET_RESPONSE_HEADERS_RAW],[1],[Assuming htp_tx_get_response_headers_raw function in bundled libhtp]) - AC_DEFINE_UNQUOTED([HAVE_HTP_DECODE_QUERY_INPLACE],[1],[Assuming htp_decode_query_inplace function in bundled libhtp]) - else - echo - echo " ERROR: Libhtp is not bundled. Get libhtp by doing:" - echo " git clone https://github.com/ironbee/libhtp" - echo " Then re-run Suricata's autogen.sh and configure script." - echo " Or, if libhtp is installed in a different location," - echo " pass --enable-non-bundled-htp to Suricata's configure script." - echo " Add --with-libhtp-includes=<dir> and --with-libhtp-libraries=<dir> if" - echo " libhtp is not installed in the include and library paths." - echo - exit 1 - fi - fi - - - # enable CUDA output - AC_ARG_ENABLE(cuda, - AS_HELP_STRING([--enable-cuda], [Enable experimental CUDA pattern matching]),,[enable_cuda=no]) - AS_IF([test "x$enable_cuda" = "xyes"], [ - AC_ARG_WITH(cuda_includes, - [ --with-cuda-includes=DIR cuda include directory], - [with_cuda_includes="$withval"],[with_cuda_includes=no]) - AC_ARG_WITH(cuda_libraries, - [ --with-cuda-libraries=DIR cuda library directory], - [with_cuda_libraries="$withval"],[with_cuda_libraries="no"]) - AC_ARG_WITH(cuda_nvcc, - [ --with-cuda-nvcc=DIR cuda nvcc compiler directory], - [with_cuda_nvcc="$withval"],[with_cuda_nvcc=no]) - - AC_DEFINE([SC_CUDA_SUPPORT__],[1],(CUDA support enabled)) - - if test "$with_cuda_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_cuda_includes}" - else - CPPFLAGS="${CPPFLAGS} -I/usr/local/cuda/include" - fi - - if test "$with_cuda_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_cuda_libraries}" - fi - - if test "$with_cuda_nvcc" != "no"; then - NVCC_DIR="${with_cuda_nvcc}" - else - NVCC_DIR="/usr/local/cuda/bin" - fi - - AC_CHECK_HEADER(cuda.h,,[AC_ERROR(cuda.h not found ...)]) - - LIBCUDA="" - AC_CHECK_LIB(cuda, cuArray3DCreate,, LIBCUDA="no") - if test "$LIBCUDA" = "no"; then - echo - echo " ERROR! libcuda library not found" - echo - exit 1 - fi - - AC_PATH_PROG([NVCC], [nvcc], no, [$PATH:$NVCC_DIR]) - if test "x$NVCC" = "xno"; then - echo - echo " ERROR! CUDA nvcc compiler not found: use --with-cuda-nvcc=DIR" - echo - exit 1 - fi - - AC_MSG_CHECKING(for nvcc version) - NVCCVER=`$NVCC --version | grep "release" | sed 's/.*release \(@<:@0-9@:>@\)\.\(@<:@0-9@:>@\).*/\1\2/'` - AC_MSG_RESULT($NVCCVER) - if test "$NVCCVER" -lt 31; then - echo - echo " Warning! Your CUDA nvcc version might be outdated." - echo " If compilation fails try the latest CUDA toolkit from" - echo " www.nvidia.com/object/cuda_develop.html" - echo - fi - - AM_PATH_PYTHON(,, no) - if test "x$PYTHON" = "xno"; then - echo - echo " ERROR! Compiling CUDA kernels requires python." - echo - exit 1 - fi - ]) - AM_CONDITIONAL([BUILD_CUDA], [test "x$enable_cuda" = "xyes"]) - - - # Check for libcap-ng - case $host in - *-*-linux*) - AC_ARG_WITH(libcap_ng_includes, - [ --with-libcap_ng-includes=DIR libcap_ng include directory], - [with_libcap_ng_includes="$withval"],[with_libcap_ng_includes=no]) - AC_ARG_WITH(libcap_ng_libraries, - [ --with-libcap_ng-libraries=DIR libcap_ng library directory], - [with_libcap_ng_libraries="$withval"],[with_libcap_ng_libraries="no"]) - - if test "$with_libcap_ng_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libcap_ng_includes}" - fi - - if test "$with_libcap_ng_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libcap_ng_libraries}" - fi - - AC_CHECK_HEADER(cap-ng.h,,LIBCAP_NG="no") - if test "$LIBCAP_NG" != "no"; then - LIBCAP_NG="" - AC_CHECK_LIB(cap-ng,capng_clear,,LIBCAP_NG="no") - fi - - if test "$LIBCAP_NG" != "no"; then - AC_DEFINE([HAVE_LIBCAP_NG],[1],[Libpcap-ng support]) - fi - - if test "$LIBCAP_NG" = "no"; then - echo - echo " WARNING! libcap-ng library not found, go get it" - echo " from http://people.redhat.com/sgrubb/libcap-ng/" - echo " or your distribution:" - echo - echo " Ubuntu: apt-get install libcap-ng-dev" - echo " Fedora: yum install libcap-ng-devel" - echo - echo " Suricata will be built without support for dropping privs." - echo - fi - ;; - esac - - # Check for DAG support. - AC_ARG_ENABLE(dag, - AS_HELP_STRING([--enable-dag],[Enable DAG capture]), - [ enable_dag=yes ], - [ enable_dag=no]) - AC_ARG_WITH(dag_includes, - [ --with-dag-includes=DIR dagapi include directory], - [with_dag_includes="$withval"],[with_dag_includes="no"]) - AC_ARG_WITH(dag_libraries, - [ --with-dag-libraries=DIR dagapi library directory], - [with_dag_libraries="$withval"],[with_dag_libraries="no"]) - - if test "$enable_dag" = "yes"; then - - if test "$with_dag_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_dag_includes}" - fi - - if test "$with_dag_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_dag_libraries}" - fi - - AC_CHECK_HEADER(dagapi.h,DAG="yes",DAG="no") - if test "$DAG" != "no"; then - DAG="" - AC_CHECK_LIB(dag,dag_open,,DAG="no",) - fi - - if test "$DAG" = "no"; then - echo - echo " ERROR! libdag library not found" - echo - exit 1 - fi - - AC_DEFINE([HAVE_DAG],[1],(Endace DAG card support enabled)) - fi - - # libnspr - enable_nspr="no" - - # Try pkg-config first: - PKG_CHECK_MODULES([libnspr], nspr,, [with_pkgconfig_nspr=no]) - if test "$with_pkgconfig_nspr" != "no"; then - CPPFLAGS="${CPPFLAGS} ${libnspr_CFLAGS}" - LIBS="${LIBS} ${libnspr_LIBS}" - fi - - AC_ARG_WITH(libnspr_includes, - [ --with-libnspr-includes=DIR libnspr include directory], - [with_libnspr_includes="$withval"],[with_libnspr_includes=no]) - AC_ARG_WITH(libnspr_libraries, - [ --with-libnspr-libraries=DIR libnspr library directory], - [with_libnspr_libraries="$withval"],[with_libnspr_libraries="no"]) - - if test "$with_libnspr_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libnspr_includes}" - fi - - AC_CHECK_HEADER(nspr.h,NSPR="yes",NSPR="no") - if test "$NSPR" = "yes"; then - if test "$with_libnspr_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libnspr_libraries}" - fi - - AC_CHECK_LIB(nspr4, PR_GetCurrentThread,, NSPR="no") - - if test "$NSPR" = "no"; then - echo - echo " ERROR! libnspr library not found, go get it" - echo " from Mozilla or your distribution:" - echo - echo " Ubuntu: apt-get install libnspr4-dev" - echo " Fedora: yum install nspr-devel" - echo - exit 1 - fi - enable_nspr="yes" - fi - - # libnss - enable_nss="no" - - # Try pkg-config first: - PKG_CHECK_MODULES([libnss], nss,, [with_pkgconfig_nss=no]) - if test "$with_pkgconfig_nss" != "no"; then - CPPFLAGS="${CPPFLAGS} ${libnss_CFLAGS}" - LIBS="${LIBS} ${libnss_LIBS}" - fi - - AC_ARG_WITH(libnss_includes, - [ --with-libnss-includes=DIR libnss include directory], - [with_libnss_includes="$withval"],[with_libnss_includes=no]) - AC_ARG_WITH(libnss_libraries, - [ --with-libnss-libraries=DIR libnss library directory], - [with_libnss_libraries="$withval"],[with_libnss_libraries="no"]) - - if test "$with_libnss_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libnss_includes}" - fi - - AC_CHECK_HEADER(sechash.h,NSS="yes",NSS="no") - if test "$NSS" = "yes"; then - if test "$with_libnss_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libnss_libraries}" - fi - - AC_CHECK_LIB(nss3, HASH_Begin,, NSS="no") - - if test "$NSS" = "no"; then - echo - echo " ERROR! libnss library not found, go get it" - echo " from Mozilla or your distribution:" - echo - echo " Ubuntu: apt-get install libnss3-dev" - echo " Fedora: yum install nss-devel" - echo - exit 1 - fi - - AC_DEFINE([HAVE_NSS],[1],[libnss available for md5]) - enable_nss="yes" - fi - - # libmagic - AC_ARG_WITH(libmagic_includes, - [ --with-libmagic-includes=DIR libmagic include directory], - [with_libmagic_includes="$withval"],[with_libmagic_includes=no]) - AC_ARG_WITH(libmagic_libraries, - [ --with-libmagic-libraries=DIR libmagic library directory], - [with_libmagic_libraries="$withval"],[with_libmagic_libraries="no"]) - - if test "$with_libmagic_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libmagic_includes}" - fi - - AC_CHECK_HEADER(magic.h,,[AC_ERROR(magic.h not found ...)]) - - if test "$with_libmagic_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libmagic_libraries}" - fi - - MAGIC="" - AC_CHECK_LIB(magic, magic_open,, MAGIC="no") - - if test "$MAGIC" = "no"; then - echo - echo " ERROR! magic library not found, go get it" - echo " from http://www.darwinsys.com/file/ or your distribution:" - echo - echo " Ubuntu: apt-get install libmagic-dev" - echo " Fedora: yum install file-devel" - echo - exit 1 - fi - - # Napatech - Using the 3GD API - AC_ARG_ENABLE(napatech, - AS_HELP_STRING([--enable-napatech],[Enabled Napatech Devices]), - [ enable_napatech=yes ], - [ enable_napatech=no]) - AC_ARG_WITH(napatech_includes, - [ --with-napatech-includes=DIR napatech include directory], - [with_napatech_includes="$withval"],[with_napatech_includes="/opt/napatech3/include"]) - AC_ARG_WITH(napatech_libraries, - [ --with-napatech-libraries=DIR napatech library directory], - [with_napatech_libraries="$withval"],[with_napatech_libraries="/opt/napatech3/lib"]) - - if test "$enable_napatech" = "yes"; then - CPPFLAGS="${CPPFLAGS} -I${with_napatech_includes}" - LDFLAGS="${LDFLAGS} -L${with_napatech_libraries} -lntapi" - AC_CHECK_HEADER(nt.h,NAPATECH="yes",NAPATECH="no") - if test "$NAPATECH" != "no"; then - NAPATECH="" - AC_CHECK_LIB(ntapi, NT_Init,NAPATECH="yes",NAPATECH="no") - fi - - if test "$NAPATECH" = "no"; then - echo - echo " ERROR! libntapi library not found" - echo - exit 1 - fi - - AC_DEFINE([HAVE_NAPATECH],[1],(Napatech capture card support)) - fi - - # liblua - AC_ARG_ENABLE(lua, - AS_HELP_STRING([--enable-lua],[Enable Lua support]), - [ enable_lua="yes"], - [ enable_lua="no"]) - AC_ARG_ENABLE(luajit, - AS_HELP_STRING([--enable-luajit],[Enable Luajit support]), - [ enable_luajit="yes"], - [ enable_luajit="no"]) - if test "$enable_lua" = "yes"; then - if test "$enable_luajit" = "yes"; then - echo "ERROR: can't enable liblua and luajit at the same time." - echo "For LuaJIT, just use --enable-luajit. For liblua (no jit)" - echo "support, use just --enable-lua." - echo "Both options will enable the Lua scripting capabilities" - echo "in Suricata". - echo - exit 1 - fi - fi - - AC_ARG_WITH(liblua_includes, - [ --with-liblua-includes=DIR liblua include directory], - [with_liblua_includes="$withval"],[with_liblua_includes="no"]) - AC_ARG_WITH(liblua_libraries, - [ --with-liblua-libraries=DIR liblua library directory], - [with_liblua_libraries="$withval"],[with_liblua_libraries="no"]) - - if test "$enable_lua" = "yes"; then - if test "$with_liblua_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_liblua_includes}" - else - # lua lua51 lua5.1 lua-5.1 - PKG_CHECK_MODULES([LUA], [lua], [LUA="yes"], [ - PKG_CHECK_MODULES([LUA], [lua5.1], [LUA="yes"], [ - PKG_CHECK_MODULES([LUA], [lua-5.1], [LUA="yes"], [ - PKG_CHECK_MODULES([LUA], [lua51], [LUA="yes"], [ - LUA="no" - ]) - ]) - ]) - ]) - CPPFLAGS="${CPPFLAGS} ${LUA_CFLAGS}" - fi - - AC_CHECK_HEADER(lualib.h,LUA="yes",LUA="no") - if test "$LUA" = "yes"; then - if test "$with_liblua_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_liblua_libraries}" - AC_CHECK_LIB(${LUA_LIB_NAME}, luaL_openlibs,, LUA="no") - if test "$LUA" = "no"; then - echo - echo " ERROR! liblua library not found, go get it" - echo " from http://lua.org/index.html or your distribution:" - echo - echo " Ubuntu: apt-get install liblua-5.1-dev" - echo " CentOS/Fedora: yum install lua-devel" - echo - echo " If you installed software in a non-standard prefix" - echo " consider adjusting the PKG_CONFIG_PATH environment variable" - echo " or use --with-liblua-libraries configure option." - echo - exit 1 - fi - else - # lua lua51 lua5.1 lua-5.1 - PKG_CHECK_MODULES([LUA], [lua], [LUA="yes"], [ - PKG_CHECK_MODULES([LUA], [lua5.1], [LUA="yes"], [ - PKG_CHECK_MODULES([LUA], [lua-5.1], [LUA="yes"], [ - PKG_CHECK_MODULES([LUA], [lua51], [LUA="yes"], [ - LUA="no" - ]) - ]) - ]) - ]) - LDFLAGS="${LDFLAGS} ${LUA_LIBS}" - fi - - AC_DEFINE([HAVE_LUA],[1],[liblua available]) - enable_lua="yes" - else - echo - echo " ERROR! liblua headers not found, go get them" - echo " from http://lua.org/index.html or your distribution:" - echo - echo " Ubuntu: apt-get install liblua-5.1-dev" - echo " CentOS/Fedora: yum install lua-devel" - echo - echo " If you installed software in a non-standard prefix" - echo " consider adjusting the PKG_CONFIG_PATH environment variable" - echo " or use --with-liblua-includes and --with-liblua-libraries" - echo " configure option." - echo - exit 1 - fi - fi - - # libluajit - AC_ARG_WITH(libluajit_includes, - [ --with-libluajit-includes=DIR libluajit include directory], - [with_libluajit_includes="$withval"],[with_libluajit_includes="no"]) - AC_ARG_WITH(libluajit_libraries, - [ --with-libluajit-libraries=DIR libluajit library directory], - [with_libluajit_libraries="$withval"],[with_libluajit_libraries="no"]) - - if test "$enable_luajit" = "yes"; then - if test "$with_libluajit_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libluajit_includes}" - else - PKG_CHECK_MODULES([LUAJIT], [luajit], , LUAJIT="no") - CPPFLAGS="${CPPFLAGS} ${LUAJIT_CFLAGS}" - fi - - AC_CHECK_HEADER(lualib.h,LUAJIT="yes",LUAJIT="no") - if test "$LUAJIT" = "yes"; then - if test "$with_libluajit_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libluajit_libraries}" - else - PKG_CHECK_MODULES([LUAJIT], [luajit]) - LDFLAGS="${LDFLAGS} ${LUAJIT_LIBS}" - fi - - AC_CHECK_LIB(luajit-5.1, luaL_openlibs,, LUAJIT="no") - - if test "$LUAJIT" = "no"; then - echo - echo " ERROR! libluajit library not found, go get it" - echo " from http://luajit.org/index.html or your distribution:" - echo - echo " Ubuntu: apt-get install libluajit-5.1-dev" - echo - echo " If you installed software in a non-standard prefix" - echo " consider adjusting the PKG_CONFIG_PATH environment variable" - echo " or use --with-libluajit-libraries configure option." - echo - exit 1 - fi - - AC_DEFINE([HAVE_LUA],[1],[lua support available]) - AC_DEFINE([HAVE_LUAJIT],[1],[libluajit available]) - enable_lua="yes, through luajit" - enable_luajit="yes" - else - echo - echo " ERROR! libluajit headers not found, go get them" - echo " from http://luajit.org/index.html or your distribution:" - echo - echo " Ubuntu: apt-get install libluajit-5.1-dev" - echo - echo " If you installed software in a non-standard prefix" - echo " consider adjusting the PKG_CONFIG_PATH environment variable" - echo " or use --with-libluajit-includes and --with-libluajit-libraries" - echo " configure option." - echo - exit 1 - fi - fi - - # libgeoip - AC_ARG_ENABLE(geoip, - AS_HELP_STRING([--enable-geoip],[Enable GeoIP support]), - [ enable_geoip="yes"], - [ enable_geoip="no"]) - AC_ARG_WITH(libgeoip_includes, - [ --with-libgeoip-includes=DIR libgeoip include directory], - [with_libgeoip_includes="$withval"],[with_libgeoip_includes="no"]) - AC_ARG_WITH(libgeoip_libraries, - [ --with-libgeoip-libraries=DIR libgeoip library directory], - [with_libgeoip_libraries="$withval"],[with_libgeoip_libraries="no"]) - - if test "$enable_geoip" = "yes"; then - if test "$with_libgeoip_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libgeoip_includes}" - fi - - AC_CHECK_HEADER(GeoIP.h,GEOIP="yes",GEOIP="no") - if test "$GEOIP" = "yes"; then - if test "$with_libgeoip_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libgeoip_libraries}" - fi - AC_CHECK_LIB(GeoIP, GeoIP_country_code_by_ipnum,, GEOIP="no") - fi - if test "$GEOIP" = "no"; then - echo - echo " ERROR! libgeoip library not found, go get it" - echo " from http://www.maxmind.com/en/geolite or your distribution:" - echo - echo " Ubuntu: apt-get install libgeoip-dev" - echo " Fedora: yum install GeoIP-devel" - echo - exit 1 - fi - - AC_DEFINE([HAVE_GEOIP],[1],[libgeoip available]) - enable_geoip="yes" - fi - - # Position Independent Executable - AC_ARG_ENABLE(pie, - AS_HELP_STRING([--enable-pie],[Enable compiling as a position independent executable]), - [ enable_pie="yes"], - [ enable_pie="no"]) - if test "$enable_pie" = "yes"; then - CPPFLAGS="${CPPFLAGS} -fPIC" - LDFLAGS="${LDFLAGS} -pie" - fi - -# libhiredis - AC_ARG_ENABLE(hiredis, - AS_HELP_STRING([--enable-hiredis],[Enable Redis support]), - [ enable_hiredis="yes"], - [ enable_hiredis="no"]) - AC_ARG_WITH(libhiredis_includes, - [ --with-libhiredis-includes=DIR libhiredis include directory], - [with_libhiredis_includes="$withval"],[with_libhiredis_includes="no"]) - AC_ARG_WITH(libhiredis_libraries, - [ --with-libhiredis-libraries=DIR libhiredis library directory], - [with_libhiredis_libraries="$withval"],[with_libhiredis_libraries="no"]) - - if test "$enable_hiredis" = "yes"; then - if test "$with_libhiredis_includes" != "no"; then - CPPFLAGS="${CPPFLAGS} -I${with_libhiredis_includes}" - fi - - AC_CHECK_HEADER("hiredis/hiredis.h",HIREDIS="yes",HIREDIS="no") - if test "$HIREDIS" = "yes"; then - if test "$with_libhiredis_libraries" != "no"; then - LDFLAGS="${LDFLAGS} -L${with_libhiredis_libraries}" - fi - AC_CHECK_LIB(hiredis, redisConnect,, HIREDIS="no") - fi - if test "$HIREDIS" = "no"; then - echo - echo " ERROR! libhiredis library not found, go get it" - echo " from https://github.com/redis/hiredis or your distribution:" - echo - echo " Ubuntu: apt-get install libhiredis-dev" - echo " Fedora: yum install libhiredis-devel" - echo - exit 1 - fi - if test "$HIREDIS" = "yes"; then - AC_DEFINE([HAVE_LIBHIREDIS],[1],[libhiredis available]) - enable_hiredis="yes" - fi - fi - -# get cache line size - AC_PATH_PROG(HAVE_GETCONF_CMD, getconf, "no") - if test "$HAVE_GETCONF_CMD" != "no"; then - CLS=$(getconf LEVEL1_DCACHE_LINESIZE) - if [test "$CLS" != "" && test "$CLS" != "0"]; then - AC_DEFINE_UNQUOTED([CLS],[${CLS}],[L1 cache line size]) - else - AC_DEFINE([CLS],[64],[L1 cache line size]) - fi - else - AC_DEFINE([CLS],[64],[L1 cache line size]) - fi - -# get revision - if test -f ./revision; then - REVISION=`cat ./revision` - AC_DEFINE_UNQUOTED([REVISION],[${REVISION}],[Git revision]) - else - AC_PATH_PROG(HAVE_GIT_CMD, git, "no") - if test "$HAVE_GIT_CMD" != "no"; then - if [ test -d .git ]; then - REVISION=`git rev-parse --short HEAD` - AC_DEFINE_UNQUOTED([REVISION],[${REVISION}],[Git revision]) - fi - fi - fi - -AC_SUBST(CFLAGS) -AC_SUBST(LDFLAGS) -AC_SUBST(CPPFLAGS) - -define([EXPAND_VARIABLE], -[$2=[$]$1 -if test $prefix = 'NONE'; then - prefix="/usr/local" -fi -while true; do - case "[$]$2" in - *\[$]* ) eval "$2=[$]$2" ;; - *) break ;; - esac -done -eval "$2=[$]$2$3" -])dnl EXPAND_VARIABLE - -# suricata log dir -if test "$WINDOWS_PATH" = "yes"; then - systemtype="`systeminfo | grep \"based PC\"`" - case "$systemtype" in - *x64*) - e_winbase="C:\\\\Program Files (x86)\\\\Suricata" - ;; - *) - e_winbase="C:\\\\Program Files\\\\Suricata" - ;; - esac - - e_sysconfdir="$e_winbase\\\\" - e_sysconfrulesdir="$e_winbase\\\\rules\\\\" - e_magic_file="$e_winbase\\\\magic.mgc" - e_logdir="$e_winbase\\\\log" - e_logfilesdir="$e_logdir\\\\files" - e_logcertsdir="$e_logdir\\\\certs" -else - EXPAND_VARIABLE(localstatedir, e_logdir, "/log/suricata/") - EXPAND_VARIABLE(localstatedir, e_rundir, "/run/") - EXPAND_VARIABLE(localstatedir, e_logfilesdir, "/log/suricata/files") - EXPAND_VARIABLE(localstatedir, e_logcertsdir, "/log/suricata/certs") - EXPAND_VARIABLE(sysconfdir, e_sysconfdir, "/suricata/") - EXPAND_VARIABLE(sysconfdir, e_sysconfrulesdir, "/suricata/rules") - EXPAND_VARIABLE(localstatedir, e_localstatedir, "/run/suricata") -fi -AC_SUBST(e_logdir) -AC_SUBST(e_rundir) -AC_SUBST(e_logfilesdir) -AC_SUBST(e_logcertsdir) -AC_SUBST(e_sysconfdir) -AC_SUBST(e_sysconfrulesdir) -AC_SUBST(e_localstatedir) -AC_DEFINE_UNQUOTED([CONFIG_DIR],["$e_sysconfdir"],[Our CONFIG_DIR]) -AC_SUBST(e_magic_file) - -EXPAND_VARIABLE(prefix, CONFIGURE_PREFIX) -EXPAND_VARIABLE(sysconfdir, CONFIGURE_SYSCONDIR) -EXPAND_VARIABLE(localstatedir, CONFIGURE_LOCALSTATEDIR) -AC_SUBST(CONFIGURE_PREFIX) -AC_SUBST(CONFIGURE_SYSCONDIR) -AC_SUBST(CONFIGURE_LOCALSTATEDIR) - -AC_OUTPUT(Makefile src/Makefile qa/Makefile qa/coccinelle/Makefile rules/Makefile doc/Makefile contrib/Makefile contrib/file_processor/Makefile contrib/file_processor/Action/Makefile contrib/file_processor/Processor/Makefile contrib/tile_pcie_logd/Makefile suricata.yaml scripts/Makefile scripts/suricatasc/Makefile scripts/suricatasc/suricatasc) - -SURICATA_BUILD_CONF="Suricata Configuration: - AF_PACKET support: ${enable_af_packet} - PF_RING support: ${enable_pfring} - NFQueue support: ${enable_nfqueue} - NFLOG support: ${enable_nflog} - IPFW support: ${enable_ipfw} - Netmap support: ${enable_netmap} - DAG enabled: ${enable_dag} - Napatech enabled: ${enable_napatech} - - Unix socket enabled: ${enable_unixsocket} - Detection enabled: ${enable_detection} - - libnss support: ${enable_nss} - libnspr support: ${enable_nspr} - libjansson support: ${enable_jansson} - hiredis support: ${enable_hiredis} - Prelude support: ${enable_prelude} - PCRE jit: ${pcre_jit_available} - LUA support: ${enable_lua} - libluajit: ${enable_luajit} - libgeoip: ${enable_geoip} - Non-bundled htp: ${enable_non_bundled_htp} - Old barnyard2 support: ${enable_old_barnyard2} - CUDA enabled: ${enable_cuda} - - Suricatasc install: ${enable_python} - - Unit tests enabled: ${enable_unittests} - Debug output enabled: ${enable_debug} - Debug validation enabled: ${enable_debug_validation} - Profiling enabled: ${enable_profiling} - Profiling locks enabled: ${enable_profiling_locks} - Coccinelle / spatch: ${enable_coccinelle} - -Generic build parameters: - Installation prefix: ${prefix} - Configuration directory: ${e_sysconfdir} - Log directory: ${e_logdir} - - --prefix ${CONFIGURE_PREFIX} - --sysconfdir ${CONFIGURE_SYSCONDIR} - --localstatedir ${CONFIGURE_LOCALSTATEDIR} - - Host: ${host} - Compiler: ${CC} (exec name) / ${compiler} (real) - GCC Protect enabled: ${enable_gccprotect} - GCC march native enabled: ${enable_gccmarch_native} - GCC Profile enabled: ${enable_gccprofile} - Position Independent Executable enabled: ${enable_pie} - CFLAGS ${CFLAGS} - PCAP_CFLAGS ${PCAP_CFLAGS} - SECCFLAGS ${SECCFLAGS}" - -echo -echo "$SURICATA_BUILD_CONF" -echo "printf(" >src/build-info.h -echo "$SURICATA_BUILD_CONF" | sed -e 's/^/"/' | sed -e 's/$/\\n"/' >>src/build-info.h -echo ");" >>src/build-info.h - -echo " -To build and install run 'make' and 'make install'. - -You can run 'make install-conf' if you want to install initial configuration -files to ${e_sysconfdir}. Running 'make install-full' will install configuration -and rules and provide you a ready-to-run suricata." -echo -echo "To install Suricata into /usr/bin/suricata, have the config in -/etc/suricata and use /var/log/suricata as log dir, use: -./configure --prefix=/usr/ --sysconfdir=/etc/ --localstatedir=/var/" -echo |