NFVBENCH-134 Support multiple idle interfaces per test VM

Enhance test VM to support auto-selection of PCI addresses based on MAC address
Enhance syslog reporting in test VM
Increase test VM version to 0.7
Add new properties to cfg.defaults.yaml to support idle interfaces
Enhance cleanup to support idle networks and ports

Change-Id: Ia89a2a1bee9eb5fb56f7adde074bdcec09cb0a3f
Signed-off-by: ahothan <ahothan@cisco.com>

1 files changed, 98 insertions, 66 deletions

diff --git a/nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local b/nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local
index caf3142..94fbd74 100644
--- a/nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local
+++ b/nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local
@@ -18,9 +18,8 @@ fi
 echo "Generating configurations for forwarder..."
 eval $(cat $NFVBENCH_CONF)
 touch /nfvbench_configured.flag
-NICS=`lspci -D | grep Ethernet | cut -d' ' -f1 | xargs`
-PCI_ADDRESS_1=`echo $NICS | awk '{ print $1 }'`
-PCI_ADDRESS_2=`echo $NICS | awk '{ print $2 }'`
+
+
 CPU_CORES=`grep -c ^processor /proc/cpuinfo`
 CPU_MASKS=0x`echo "obase=16; 2 ^ $CPU_CORES - 1" | bc`
 WORKER_CORES=`expr $CPU_CORES - 1`
@@ -30,81 +29,114 @@ echo 1 > /sys/bus/workqueue/devices/writeback/cpumask
 echo 1 > /sys/devices/virtual/workqueue/cpumask
 echo 1 > /proc/irq/default_smp_affinity
 for irq in `ls /proc/irq/`; do
-    echo 1 > /proc/irq/$irq/smp_affinity
+    if [ -f /proc/irq/$irq/smp_affinity ]; then
+        echo 1 > /proc/irq/$irq/smp_affinity
+    fi
 done
 tuna -c $(seq -s, 1 1 $WORKER_CORES) --isolate
 
+NET_PATH=/sys/class/net
+
+get_pci_address() {
+    # device mapping for CentOS Linux 7:
+    # lspci:
+    #   00.03.0 Ethernet controller: Red Hat, Inc. Virtio network device
+    #   00.04.0 Ethernet controller: Red Hat, Inc. Virtio network device
+    # /sys/class/net:
+    # /sys/class/net/eth0 -> ../../devices/pci0000:00/0000:00:03.0/virtio0/net/eth0
+    # /sys/class/net/eth1 -> ../../devices/pci0000:00/0000:00:04.0/virtio1/net/eth1
+
+    mac=$1
+    for f in $(ls $NET_PATH/); do
+        if grep -q "$mac" $NET_PATH/$f/address; then
+            pci_addr=$(readlink $NET_PATH/$f | cut -d "/" -f5)
+            # some virtual interfaces match on MAC and do not have a PCI address
+            if [ "$pci_addr" -a "$pci_addr" != "N/A" ]; then
+                break
+            else
+                pci_addr=""
+            fi
+        fi;
+    done
+    if [ -z "$pci_addr" ]; then
+        echo "ERROR: Cannot find pci address for MAC $mac" >&2
+        logger "NFVBENCHVM ERROR: Cannot find pci address for MAC $mac"
+        return 1
+    fi
+    echo $pci_addr
+    return 0
+}
+
 # Sometimes the interfaces on the loopback VM will use different drivers, e.g.
 # one from vswitch which is virtio based, one is from SRIOV VF. In this case,
 # we have to make sure the forwarder uses them in the right order, which is
 # especially important if the VM is in a PVVP chain.
-SWAP_FLAG=0
 if [ $INTF_MAC1 ] && [ $INTF_MAC2 ]; then
-    NET_PATH=/sys/class/net
-    EXP_INTF_1=$(for f in $(ls $NET_PATH/); do if grep -q "$INTF_MAC1" $NET_PATH/$f/address; then echo $f; break; fi; done)
-    EXP_PCI_ADDRESS_1=$(ethtool -i $EXP_INTF_1 | grep "bus-info" | awk -F' ' '{ print $2 }')
-    EXP_INTF_2=$(for f in $(ls $NET_PATH/); do if grep -q "$INTF_MAC2" $NET_PATH/$f/address; then echo $f; break; fi; done)
-    EXP_PCI_ADDRESS_2=$(ethtool -i $EXP_INTF_2 | grep "bus-info" | awk -F' ' '{ print $2 }')
-    if [ "$PCI_ADDRESS_1" == "$EXP_PCI_ADDRESS_2" ] && [ "$PCI_ADDRESS_2" == "$EXP_PCI_ADDRESS_1" ]; then
-        # Interfaces are not coming in the expected order:
-        #     (1) Swap the traffic generator MAC in the case of testpmd;
-        #     (2) Swap the interface configs in the case of VPP;
-        SWAP_FLAG=1
-    fi
+    PCI_ADDRESS_1=$(get_pci_address $INTF_MAC1)
+    PCI_ADDRESS_2=$(get_pci_address $INTF_MAC2)
+else
+    echo "ERROR: VM MAC Addresses missing in $NFVBENCH_CONF"
+    logger "NFVBENCHVM ERROR: VM MAC Addresses missing in $NFVBENCH_CONF"
 fi
 
-# Configure the forwarder
-if [ -z "`lsmod | grep igb_uio`" ]; then
-    modprobe uio
-    insmod /dpdk/igb_uio.ko
-fi
-if [ "$FORWARDER" == "testpmd" ]; then
-    echo "Configuring testpmd..."
-    if [ $SWAP_FLAG -eq 1 ]; then
-        TEMP=$TG_MAC1; TG_MAC1=$TG_MAC2; TG_MAC2=$TEMP
+if [ $PCI_ADDRESS_1 ] && [ $PCI_ADDRESS_2 ]; then
+    logger "NFVBENCHVM: Using pci $PCI_ADDRESS_1 ($INTF_MAC1)"
+    logger "NFVBENCHVM: Using pci $PCI_ADDRESS_2 ($INTF_MAC2)"
+    # Configure the forwarder
+    if [ -z "`lsmod | grep igb_uio`" ]; then
+        modprobe uio
+        insmod /dpdk/igb_uio.ko
     fi
-    # Binding ports to DPDK
-    /dpdk/dpdk-devbind.py -b igb_uio $PCI_ADDRESS_1
-    /dpdk/dpdk-devbind.py -b igb_uio $PCI_ADDRESS_2
-    screen -dmSL testpmd /dpdk/testpmd \
-                         -c $CPU_MASKS \
-                         -n 4 \
-                         -- \
-                             --burst=32 \
-                             --txd=256 \
-                             --rxd=1024 \
-                             --eth-peer=0,$TG_MAC1 \
-                             --eth-peer=1,$TG_MAC2 \
-                             --forward-mode=mac \
-                             --nb-cores=$WORKER_CORES \
-                             --max-pkt-len=9000 \
-                             --cmdline-file=/dpdk/testpmd_cmd.txt
-else
-    echo "Configuring vpp..."
-    cp /vpp/startup.conf /etc/vpp/startup.conf
-    cp /vpp/vm.conf /etc/vpp/vm.conf
+    if [ "$FORWARDER" == "testpmd" ]; then
+        echo "Configuring testpmd..."
+        # Binding ports to DPDK
+        /dpdk/dpdk-devbind.py -b igb_uio $PCI_ADDRESS_1
+        /dpdk/dpdk-devbind.py -b igb_uio $PCI_ADDRESS_2
+        screen -dmSL testpmd /dpdk/testpmd \
+                            -c $CPU_MASKS \
+                            -n 4 \
+                            -- \
+                                --burst=32 \
+                                --txd=256 \
+                                --rxd=1024 \
+                                --eth-peer=0,$TG_MAC1 \
+                                --eth-peer=1,$TG_MAC2 \
+                                --forward-mode=mac \
+                                --nb-cores=$WORKER_CORES \
+                                --max-pkt-len=9000 \
+                                --cmdline-file=/dpdk/testpmd_cmd.txt
+        echo "testpmd running in screen 'testpmd'"
+        logger "NFVBENCHVM: testpmd running in screen 'testpmd'"
+    else
+        echo "Configuring vpp..."
+        cp /vpp/startup.conf /etc/vpp/startup.conf
+        cp /vpp/vm.conf /etc/vpp/vm.conf
 
-    sed -i "s/{{PCI_ADDRESS_1}}/$PCI_ADDRESS_1/g" /etc/vpp/startup.conf
-    sed -i "s/{{PCI_ADDRESS_2}}/$PCI_ADDRESS_2/g" /etc/vpp/startup.conf
-    sed -i "s/{{WORKER_CORES}}/$WORKER_CORES/g" /etc/vpp/startup.conf
-    service vpp start
-    sleep 10
+        sed -i "s/{{PCI_ADDRESS_1}}/$PCI_ADDRESS_1/g" /etc/vpp/startup.conf
+        sed -i "s/{{PCI_ADDRESS_2}}/$PCI_ADDRESS_2/g" /etc/vpp/startup.conf
+        sed -i "s/{{WORKER_CORES}}/$WORKER_CORES/g" /etc/vpp/startup.conf
+        service vpp start
+        sleep 10
 
-    INTFS=`vppctl show int | grep Ethernet | xargs`
-    INTF_1=`echo $INTFS | awk '{ print $1 }'`
-    INTF_2=`echo $INTFS | awk '{ print $4 }'`
-    if [ $SWAP_FLAG -eq 1 ]; then
-        TEMP=$INTF_1; INTF_1=$INTF_2; INTF_2=$TEMP
+        INTFS=`vppctl show int | grep Ethernet | xargs`
+        INTF_1=`echo $INTFS | awk '{ print $1 }'`
+        INTF_2=`echo $INTFS | awk '{ print $4 }'`
+        sed -i "s/{{INTF_1}}/${INTF_1//\//\/}/g" /etc/vpp/vm.conf
+        sed -i "s/{{INTF_2}}/${INTF_2//\//\/}/g" /etc/vpp/vm.conf
+        sed -i "s/{{VNF_GATEWAY1_CIDR}}/${VNF_GATEWAY1_CIDR//\//\/}/g" /etc/vpp/vm.conf
+        sed -i "s/{{VNF_GATEWAY2_CIDR}}/${VNF_GATEWAY2_CIDR//\//\/}/g" /etc/vpp/vm.conf
+        sed -i "s/{{TG_MAC1}}/${TG_MAC1}/g" /etc/vpp/vm.conf
+        sed -i "s/{{TG_MAC2}}/${TG_MAC2}/g" /etc/vpp/vm.conf
+        sed -i "s/{{TG_NET1}}/${TG_NET1//\//\/}/g" /etc/vpp/vm.conf
+        sed -i "s/{{TG_NET2}}/${TG_NET2//\//\/}/g" /etc/vpp/vm.conf
+        sed -i "s/{{TG_GATEWAY1_IP}}/${TG_GATEWAY1_IP}/g" /etc/vpp/vm.conf
+        sed -i "s/{{TG_GATEWAY2_IP}}/${TG_GATEWAY2_IP}/g" /etc/vpp/vm.conf
+        service vpp restart
+        logger "NFVBENCHVM: vpp service restarted"
     fi
-    sed -i "s/{{INTF_1}}/${INTF_1//\//\/}/g" /etc/vpp/vm.conf
-    sed -i "s/{{INTF_2}}/${INTF_2//\//\/}/g" /etc/vpp/vm.conf
-    sed -i "s/{{VNF_GATEWAY1_CIDR}}/${VNF_GATEWAY1_CIDR//\//\/}/g" /etc/vpp/vm.conf
-    sed -i "s/{{VNF_GATEWAY2_CIDR}}/${VNF_GATEWAY2_CIDR//\//\/}/g" /etc/vpp/vm.conf
-    sed -i "s/{{TG_MAC1}}/${TG_MAC1}/g" /etc/vpp/vm.conf
-    sed -i "s/{{TG_MAC2}}/${TG_MAC2}/g" /etc/vpp/vm.conf
-    sed -i "s/{{TG_NET1}}/${TG_NET1//\//\/}/g" /etc/vpp/vm.conf
-    sed -i "s/{{TG_NET2}}/${TG_NET2//\//\/}/g" /etc/vpp/vm.conf
-    sed -i "s/{{TG_GATEWAY1_IP}}/${TG_GATEWAY1_IP}/g" /etc/vpp/vm.conf
-    sed -i "s/{{TG_GATEWAY2_IP}}/${TG_GATEWAY2_IP}/g" /etc/vpp/vm.conf
-    service vpp restart
+else
+    echo "ERROR: Cannot find PCI Address from MAC"
+    echo "$INTF_MAC1: $PCI_ADDRESS_1"
+    echo "$INTF_MAC2: $PCI_ADDRESS_2"
+    logger "NFVBENCHVM ERROR: Cannot find PCI Address from MAC"
 fi