summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
authorahothan <ahothan@cisco.com>2017-12-21 17:17:46 -0800
committerahothan <ahothan@cisco.com>2017-12-21 17:17:46 -0800
commitefc678c9d3843dcfd373b5749a88c51228b0b27c (patch)
tree9eb405d22720aa4332de10a525cfe10c1124724d /docs
parenta3c54b7fdce6084d6f64aa3cc23740381286a8ff (diff)
[NFVBENCH-59] Add Unit Testing of the NDR/PDR convergence algorithm using the dummy traffic gen
[NFVBENCH-60] Fix pylint warnings Change-Id: I72deec060bf25774d1be33eaeefc74b42a576483 Signed-off-by: ahothan <ahothan@cisco.com>
Diffstat (limited to 'docs')
-rw-r--r--docs/development/design/ndrpdr.rst10
1 files changed, 10 insertions, 0 deletions
diff --git a/docs/development/design/ndrpdr.rst b/docs/development/design/ndrpdr.rst
index 4f611a0..5361174 100644
--- a/docs/development/design/ndrpdr.rst
+++ b/docs/development/design/ndrpdr.rst
@@ -28,7 +28,17 @@ The default value of 0.1 indicates for example that the measured NDR and PDR are
actual NDR/PDR (e.g. 0.1% of 10Gbps is 10Mbps). It also determines how small the search range must be in the binary search.
The recursion narrows down the range by half and stops when:
+
- the range is smaller than the configured load_epsilon value
- or when the search hits 100% or 0% of line rate
+One particularity of using a software traffic generator is that the requested Tx rate may not always be met due to
+resource limitations (e.g. CPU is not fast enough to generate a very high load). The algorithm should take this into
+consideration:
+
+- always monitor the actual Tx rate achieved
+- actual Tx rate is always <= requested Tx rate
+- the measured drop rate should always be relative to the actual Tx rate
+- if the actual Tx rate is < requested Tx rate and the measured drop rate is already within threshold (<NDR/PDR threshold) then the binary search must stop with proper warning
+