1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
/*
* drivers/video/geode/display_gx1.c
* -- Geode GX1 display controller
*
* Copyright (C) 2005 Arcom Control Systems Ltd.
*
* Based on AMD's original 2.4 driver:
* Copyright (C) 2004 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/spinlock.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/div64.h>
#include <asm/delay.h>
#include "geodefb.h"
#include "display_gx1.h"
static DEFINE_SPINLOCK(gx1_conf_reg_lock);
static u8 gx1_read_conf_reg(u8 reg)
{
u8 val, ccr3;
unsigned long flags;
spin_lock_irqsave(&gx1_conf_reg_lock, flags);
outb(CONFIG_CCR3, 0x22);
ccr3 = inb(0x23);
outb(CONFIG_CCR3, 0x22);
outb(ccr3 | CONFIG_CCR3_MAPEN, 0x23);
outb(reg, 0x22);
val = inb(0x23);
outb(CONFIG_CCR3, 0x22);
outb(ccr3, 0x23);
spin_unlock_irqrestore(&gx1_conf_reg_lock, flags);
return val;
}
unsigned gx1_gx_base(void)
{
return (gx1_read_conf_reg(CONFIG_GCR) & 0x03) << 30;
}
int gx1_frame_buffer_size(void)
{
void __iomem *mc_regs;
u32 bank_cfg;
int d;
unsigned dram_size = 0, fb_base;
mc_regs = ioremap(gx1_gx_base() + 0x8400, 0x100);
if (!mc_regs)
return -ENOMEM;
/* Calculate the total size of both DIMM0 and DIMM1. */
bank_cfg = readl(mc_regs + MC_BANK_CFG);
for (d = 0; d < 2; d++) {
if ((bank_cfg & MC_BCFG_DIMM0_PG_SZ_MASK) != MC_BCFG_DIMM0_PG_SZ_NO_DIMM)
dram_size += 0x400000 << ((bank_cfg & MC_BCFG_DIMM0_SZ_MASK) >> 8);
bank_cfg >>= 16; /* look at DIMM1 next */
}
fb_base = (readl(mc_regs + MC_GBASE_ADD) & MC_GADD_GBADD_MASK) << 19;
iounmap(mc_regs);
return dram_size - fb_base;
}
static void gx1_set_mode(struct fb_info *info)
{
struct geodefb_par *par = info->par;
u32 gcfg, tcfg, ocfg, dclk_div, val;
int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
/* Unlock the display controller registers. */
readl(par->dc_regs + DC_UNLOCK);
writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
tcfg = readl(par->dc_regs + DC_TIMING_CFG);
/* Blank the display and disable the timing generator. */
tcfg &= ~(DC_TCFG_BLKE | DC_TCFG_TGEN);
writel(tcfg, par->dc_regs + DC_TIMING_CFG);
/* Wait for pending memory requests before disabling the FIFO load. */
udelay(100);
/* Disable FIFO load and compression. */
gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
/* Setup DCLK and its divisor. */
gcfg &= ~DC_GCFG_DCLK_MASK;
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
par->vid_ops->set_dclk(info);
dclk_div = DC_GCFG_DCLK_DIV_1; /* FIXME: may need to divide DCLK by 2 sometimes? */
gcfg |= dclk_div;
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
/* Wait for the clock generatation to settle. This is needed since
* some of the register writes that follow require that clock to be
* present. */
udelay(1000); /* FIXME: seems a little long */
/*
* Setup new mode.
*/
/* Clear all unused feature bits. */
gcfg = DC_GCFG_VRDY | dclk_div;
/* Set FIFO priority (default 6/5) and enable. */
/* FIXME: increase fifo priority for 1280x1024 modes? */
gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
/* FIXME: Set pixel and line double bits if necessary. */
/* Framebuffer start offset. */
writel(0, par->dc_regs + DC_FB_ST_OFFSET);
/* Line delta and line buffer length. */
writel(info->fix.line_length >> 2, par->dc_regs + DC_LINE_DELTA);
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
par->dc_regs + DC_BUF_SIZE);
/* Output configuration. Enable panel data, set pixel format. */
ocfg = DC_OCFG_PCKE | DC_OCFG_PDEL | DC_OCFG_PDEH;
if (info->var.bits_per_pixel == 8) ocfg |= DC_OCFG_8BPP;
/* Enable timing generator, sync and FP data. */
tcfg = DC_TCFG_FPPE | DC_TCFG_HSYE | DC_TCFG_VSYE | DC_TCFG_BLKE
| DC_TCFG_TGEN;
/* Horizontal and vertical timings. */
hactive = info->var.xres;
hblankstart = hactive;
hsyncstart = hblankstart + info->var.right_margin;
hsyncend = hsyncstart + info->var.hsync_len;
hblankend = hsyncend + info->var.left_margin;
htotal = hblankend;
vactive = info->var.yres;
vblankstart = vactive;
vsyncstart = vblankstart + info->var.lower_margin;
vsyncend = vsyncstart + info->var.vsync_len;
vblankend = vsyncend + info->var.upper_margin;
vtotal = vblankend;
val = (hactive - 1) | ((htotal - 1) << 16);
writel(val, par->dc_regs + DC_H_TIMING_1);
val = (hblankstart - 1) | ((hblankend - 1) << 16);
writel(val, par->dc_regs + DC_H_TIMING_2);
val = (hsyncstart - 1) | ((hsyncend - 1) << 16);
writel(val, par->dc_regs + DC_H_TIMING_3);
writel(val, par->dc_regs + DC_FP_H_TIMING);
val = (vactive - 1) | ((vtotal - 1) << 16);
writel(val, par->dc_regs + DC_V_TIMING_1);
val = (vblankstart - 1) | ((vblankend - 1) << 16);
writel(val, par->dc_regs + DC_V_TIMING_2);
val = (vsyncstart - 1) | ((vsyncend - 1) << 16);
writel(val, par->dc_regs + DC_V_TIMING_3);
val = (vsyncstart - 2) | ((vsyncend - 2) << 16);
writel(val, par->dc_regs + DC_FP_V_TIMING);
/* Write final register values. */
writel(ocfg, par->dc_regs + DC_OUTPUT_CFG);
writel(tcfg, par->dc_regs + DC_TIMING_CFG);
udelay(1000); /* delay after TIMING_CFG. FIXME: perhaps a little long */
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
par->vid_ops->configure_display(info);
/* Relock display controller registers */
writel(0, par->dc_regs + DC_UNLOCK);
/* FIXME: write line_length and bpp to Graphics Pipeline GP_BLT_STATUS
* register. */
}
static void gx1_set_hw_palette_reg(struct fb_info *info, unsigned regno,
unsigned red, unsigned green, unsigned blue)
{
struct geodefb_par *par = info->par;
int val;
/* Hardware palette is in RGB 6-6-6 format. */
val = (red << 2) & 0x3f000;
val |= (green >> 4) & 0x00fc0;
val |= (blue >> 10) & 0x0003f;
writel(regno, par->dc_regs + DC_PAL_ADDRESS);
writel(val, par->dc_regs + DC_PAL_DATA);
}
struct geode_dc_ops gx1_dc_ops = {
.set_mode = gx1_set_mode,
.set_palette_reg = gx1_set_hw_palette_reg,
};
|
