summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/scsi/aic7xxx/aic79xx.seq
blob: 3a36d9362a10f5e064a0867ebe54f5e2bdd91c16 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
/*
 * Adaptec U320 device driver firmware for Linux and FreeBSD.
 *
 * Copyright (c) 1994-2001, 2004 Justin T. Gibbs.
 * Copyright (c) 2000-2002 Adaptec Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 *
 * $FreeBSD$
 */

VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $"
PATCH_ARG_LIST = "struct ahd_softc *ahd"
PREFIX = "ahd_"

#include "aic79xx.reg"
#include "scsi_message.h"

restart:
if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
	test	SEQINTCODE, 0xFF jz idle_loop;
	SET_SEQINTCODE(NO_SEQINT)
}

idle_loop:

	if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
		/*
		 * Convert ERROR status into a sequencer
		 * interrupt to handle the case of an
		 * interrupt collision on the hardware
		 * setting of HWERR.
		 */
		test	ERROR, 0xFF jz no_error_set;
		SET_SEQINTCODE(SAW_HWERR)
no_error_set:
	}
	SET_MODE(M_SCSI, M_SCSI)
	test	SCSISEQ0, ENSELO|ENARBO jnz idle_loop_checkbus;
	test	SEQ_FLAGS2, SELECTOUT_QFROZEN jz check_waiting_list;
	/*
	 * If the kernel has caught up with us, thaw the queue.
	 */
	mov	A, KERNEL_QFREEZE_COUNT;
	cmp	QFREEZE_COUNT, A jne check_frozen_completions;
	mov	A, KERNEL_QFREEZE_COUNT[1];
	cmp	QFREEZE_COUNT[1], A jne check_frozen_completions;
	and	SEQ_FLAGS2, ~SELECTOUT_QFROZEN;
	jmp	check_waiting_list;
check_frozen_completions:
	test	SSTAT0, SELDO|SELINGO jnz idle_loop_checkbus;
BEGIN_CRITICAL;
	/*
	 * If we have completions stalled waiting for the qfreeze
	 * to take effect, move them over to the complete_scb list
	 * now that no selections are pending.
	 */
	cmp	COMPLETE_ON_QFREEZE_HEAD[1],SCB_LIST_NULL je idle_loop_checkbus;
	/*
	 * Find the end of the qfreeze list.  The first element has
	 * to be treated specially.
	 */
	bmov	SCBPTR, COMPLETE_ON_QFREEZE_HEAD, 2;
	cmp 	SCB_NEXT_COMPLETE[1], SCB_LIST_NULL je join_lists;
	/*
	 * Now the normal loop.
	 */
	bmov	SCBPTR, SCB_NEXT_COMPLETE, 2;
	cmp 	SCB_NEXT_COMPLETE[1], SCB_LIST_NULL jne . - 1;
join_lists:
	bmov	SCB_NEXT_COMPLETE, COMPLETE_SCB_HEAD, 2;
	bmov	COMPLETE_SCB_HEAD, COMPLETE_ON_QFREEZE_HEAD, 2;
	mvi	COMPLETE_ON_QFREEZE_HEAD[1], SCB_LIST_NULL;
	jmp	idle_loop_checkbus;
check_waiting_list:
	cmp	WAITING_TID_HEAD[1], SCB_LIST_NULL je idle_loop_checkbus;
	/*
	 * ENSELO is cleared by a SELDO, so we must test for SELDO
	 * one last time.
	 */
	test	SSTAT0, SELDO jnz select_out;
	call	start_selection;
idle_loop_checkbus:
	test	SSTAT0, SELDO jnz select_out;
END_CRITICAL;
	test	SSTAT0, SELDI jnz select_in;
	test	SCSIPHASE, ~DATA_PHASE_MASK jz idle_loop_check_nonpackreq;
	test	SCSISIGO, ATNO jz idle_loop_check_nonpackreq;
	call	unexpected_nonpkt_phase_find_ctxt;
idle_loop_check_nonpackreq:
	test	SSTAT2, NONPACKREQ jz . + 2;
	call	unexpected_nonpkt_phase_find_ctxt;
	if ((ahd->bugs & AHD_FAINT_LED_BUG) != 0) {
		/*
		 * On Rev A. hardware, the busy LED is only
		 * turned on automaically during selections
		 * and re-selections.  Make the LED status
		 * more useful by forcing it to be on so
		 * long as one of our data FIFOs is active.
		 */
		and	A, FIFO0FREE|FIFO1FREE, DFFSTAT;
		cmp	A, FIFO0FREE|FIFO1FREE jne . + 3;
		and	SBLKCTL, ~DIAGLEDEN|DIAGLEDON;
		jmp	. + 2;
		or	SBLKCTL, DIAGLEDEN|DIAGLEDON;
	}
	call	idle_loop_gsfifo_in_scsi_mode;
	call	idle_loop_service_fifos;
	call	idle_loop_cchan;
	jmp	idle_loop;

idle_loop_gsfifo:
	SET_MODE(M_SCSI, M_SCSI)
BEGIN_CRITICAL;
idle_loop_gsfifo_in_scsi_mode:
	test	LQISTAT2, LQIGSAVAIL jz return;
	/*
	 * We have received good status for this transaction.  There may
	 * still be data in our FIFOs draining to the host.  Complete
	 * the SCB only if all data has transferred to the host.
	 */
good_status_IU_done:
	bmov	SCBPTR, GSFIFO, 2;
	clr	SCB_SCSI_STATUS;
	/*
	 * If a command completed before an attempted task management
	 * function completed, notify the host after disabling any
	 * pending select-outs.
	 */
	test	SCB_TASK_MANAGEMENT, 0xFF jz gsfifo_complete_normally;
	test	SSTAT0, SELDO|SELINGO jnz . + 2;
	and	SCSISEQ0, ~ENSELO;
	SET_SEQINTCODE(TASKMGMT_CMD_CMPLT_OKAY)
gsfifo_complete_normally:
	or	SCB_CONTROL, STATUS_RCVD;

	/*
	 * Since this status did not consume a FIFO, we have to
	 * be a bit more dilligent in how we check for FIFOs pertaining
	 * to this transaction.  There are two states that a FIFO still
	 * transferring data may be in.
	 *
	 * 1) Configured and draining to the host, with a FIFO handler.
	 * 2) Pending cfg4data, fifo not empty.
	 *
	 * Case 1 can be detected by noticing a non-zero FIFO active
	 * count in the SCB.  In this case, we allow the routine servicing
	 * the FIFO to complete the SCB.
	 * 
	 * Case 2 implies either a pending or yet to occur save data
	 * pointers for this same context in the other FIFO.  So, if
	 * we detect case 1, we will properly defer the post of the SCB
	 * and achieve the desired result.  The pending cfg4data will
	 * notice that status has been received and complete the SCB.
	 */
	test	SCB_FIFO_USE_COUNT, 0xFF jnz idle_loop_gsfifo_in_scsi_mode;
	call	complete;
END_CRITICAL;
	jmp	idle_loop_gsfifo_in_scsi_mode;

idle_loop_service_fifos:
	SET_MODE(M_DFF0, M_DFF0)
BEGIN_CRITICAL;
	test	LONGJMP_ADDR[1], INVALID_ADDR jnz idle_loop_next_fifo;
	call	longjmp;
END_CRITICAL;
idle_loop_next_fifo:
	SET_MODE(M_DFF1, M_DFF1)
BEGIN_CRITICAL;
	test	LONGJMP_ADDR[1], INVALID_ADDR jz longjmp;
END_CRITICAL;
return:
	ret;

idle_loop_cchan:
	SET_MODE(M_CCHAN, M_CCHAN)
	test	QOFF_CTLSTA, HS_MAILBOX_ACT jz	hs_mailbox_empty;
	or	QOFF_CTLSTA, HS_MAILBOX_ACT;
	mov	LOCAL_HS_MAILBOX, HS_MAILBOX;
hs_mailbox_empty:
BEGIN_CRITICAL;
	test	CCSCBCTL, CCARREN|CCSCBEN jz scbdma_idle;
	test	CCSCBCTL, CCSCBDIR jnz fetch_new_scb_inprog;
	test	CCSCBCTL, CCSCBDONE jz return;
	/* FALLTHROUGH */
scbdma_tohost_done:
	test	CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone;
	/*
	 * An SCB has been successfully uploaded to the host.
	 * If the SCB was uploaded for some reason other than
	 * bad SCSI status (currently only for underruns), we
	 * queue the SCB for normal completion.  Otherwise, we
	 * wait until any select-out activity has halted, and
	 * then queue the completion.
	 */
	and	CCSCBCTL, ~(CCARREN|CCSCBEN);
	bmov	COMPLETE_DMA_SCB_HEAD, SCB_NEXT_COMPLETE, 2;
	cmp	SCB_NEXT_COMPLETE[1], SCB_LIST_NULL jne . + 2;
	mvi	COMPLETE_DMA_SCB_TAIL[1], SCB_LIST_NULL;
	test	SCB_SCSI_STATUS, 0xff jz scbdma_queue_completion;
	bmov	SCB_NEXT_COMPLETE, COMPLETE_ON_QFREEZE_HEAD, 2;
	bmov	COMPLETE_ON_QFREEZE_HEAD, SCBPTR, 2 ret;
scbdma_queue_completion:
	bmov	SCB_NEXT_COMPLETE, COMPLETE_SCB_HEAD, 2;
	bmov	COMPLETE_SCB_HEAD, SCBPTR, 2 ret;
fill_qoutfifo_dmadone:
	and	CCSCBCTL, ~(CCARREN|CCSCBEN);
	call	qoutfifo_updated;
	mvi	COMPLETE_SCB_DMAINPROG_HEAD[1], SCB_LIST_NULL;
	bmov	QOUTFIFO_NEXT_ADDR, SCBHADDR, 4;
	test	QOFF_CTLSTA, SDSCB_ROLLOVR jz return;
	bmov	QOUTFIFO_NEXT_ADDR, SHARED_DATA_ADDR, 4;
	xor	QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID_TOGGLE ret;
END_CRITICAL;

qoutfifo_updated:
	/*
	 * If there are more commands waiting to be dma'ed
	 * to the host, always coalesce.  Otherwise honor the
	 * host's wishes.
	 */
	cmp	COMPLETE_DMA_SCB_HEAD[1], SCB_LIST_NULL jne coalesce_by_count;
	cmp	COMPLETE_SCB_HEAD[1], SCB_LIST_NULL jne coalesce_by_count;
	test	LOCAL_HS_MAILBOX, ENINT_COALESCE jz issue_cmdcmplt;

	/*
	 * If we have relatively few commands outstanding, don't
	 * bother waiting for another command to complete.
	 */
	test	CMDS_PENDING[1], 0xFF jnz coalesce_by_count;
	/* Add -1 so that jnc means <= not just < */
	add	A, -1, INT_COALESCING_MINCMDS;
	add	NONE, A, CMDS_PENDING;
	jnc	issue_cmdcmplt;
	
	/*
	 * If coalescing, only coalesce up to the limit
	 * provided by the host driver.
	 */
coalesce_by_count:
	mov	A, INT_COALESCING_MAXCMDS;
	add	NONE, A, INT_COALESCING_CMDCOUNT;
	jc	issue_cmdcmplt;
	/*
	 * If the timer is not currently active,
	 * fire it up.
	 */
	test	INTCTL, SWTMINTMASK jz return;
	bmov	SWTIMER, INT_COALESCING_TIMER, 2;
	mvi	CLRSEQINTSTAT, CLRSEQ_SWTMRTO;
	or	INTCTL, SWTMINTEN|SWTIMER_START;
	and	INTCTL, ~SWTMINTMASK ret;

issue_cmdcmplt:
	mvi	INTSTAT, CMDCMPLT;
	clr	INT_COALESCING_CMDCOUNT;
	or	INTCTL, SWTMINTMASK ret;

BEGIN_CRITICAL;
fetch_new_scb_inprog:
	test	CCSCBCTL, ARRDONE jz return;
fetch_new_scb_done:
	and	CCSCBCTL, ~(CCARREN|CCSCBEN);
	clr	A;
	add	CMDS_PENDING, 1;
	adc	CMDS_PENDING[1], A;
	if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
		/*
		 * "Short Luns" are not placed into outgoing LQ
		 * packets in the correct byte order.  Use a full
		 * sized lun field instead and fill it with the
		 * one byte of lun information we support.
		 */
		mov	SCB_PKT_LUN[6], SCB_LUN;
	}
	/*
	 * The FIFO use count field is shared with the
	 * tag set by the host so that our SCB dma engine
	 * knows the correct location to store the SCB.
	 * Set it to zero before processing the SCB.
	 */
	clr	SCB_FIFO_USE_COUNT;
	/* Update the next SCB address to download. */
	bmov	NEXT_QUEUED_SCB_ADDR, SCB_NEXT_SCB_BUSADDR, 4;
	/*
	 * NULL out the SCB links since these fields
	 * occupy the same location as SCB_NEXT_SCB_BUSADDR.
	 */
	mvi	SCB_NEXT[1], SCB_LIST_NULL;
	mvi	SCB_NEXT2[1], SCB_LIST_NULL;
	/* Increment our position in the QINFIFO. */
	mov	NONE, SNSCB_QOFF;

	/*
	 * Save SCBID of this SCB in REG0 since
	 * SCBPTR will be clobbered during target
	 * list updates.  We also record the SCB's
	 * flags so that we can refer to them even
	 * after SCBPTR has been changed.
	 */
	bmov	REG0, SCBPTR, 2;
	mov	A, SCB_CONTROL;

	/*
	 * Find the tail SCB of the execution queue
	 * for this target.
	 */
	shr	SINDEX, 3, SCB_SCSIID;
	and	SINDEX, ~0x1;
	mvi	SINDEX[1], (WAITING_SCB_TAILS >> 8);
	bmov	DINDEX, SINDEX, 2;
	bmov	SCBPTR, SINDIR, 2;

	/*
	 * Update the tail to point to the new SCB.
	 */
	bmov	DINDIR, REG0, 2;

	/*
	 * If the queue was empty, queue this SCB as
	 * the first for this target.
	 */
	cmp	SCBPTR[1], SCB_LIST_NULL je first_new_target_scb;

	/*
	 * SCBs that want to send messages must always be
	 * at the head of their per-target queue so that
	 * ATN can be asserted even if the current
	 * negotiation agreement is packetized.  If the
	 * target queue is empty, the SCB can be queued
	 * immediately.  If the queue is not empty, we must
	 * wait for it to empty before entering this SCB
	 * into the waiting for selection queue.  Otherwise
	 * our batching and round-robin selection scheme 
	 * could allow commands to be queued out of order.
	 * To simplify the implementation, we stop pulling
	 * new commands from the host until the MK_MESSAGE
	 * SCB can be queued to the waiting for selection
	 * list.
	 */
	test	A, MK_MESSAGE jz batch_scb; 

	/*
	 * If the last SCB is also a MK_MESSAGE SCB, then
	 * order is preserved even if we batch.
	 */
	test	SCB_CONTROL, MK_MESSAGE jz batch_scb; 

	/*
	 * Defer this SCB and stop fetching new SCBs until
	 * it can be queued.  Since the SCB_SCSIID of the
	 * tail SCB must be the same as that of the newly
	 * queued SCB, there is no need to restore the SCBID
	 * here.
	 */
	or	SEQ_FLAGS2, PENDING_MK_MESSAGE;
	bmov	MK_MESSAGE_SCB, REG0, 2;
	mov	MK_MESSAGE_SCSIID, SCB_SCSIID ret;

batch_scb:
	/*
	 * Otherwise just update the previous tail SCB to
	 * point to the new tail.
	 */
	bmov	SCB_NEXT, REG0, 2 ret;

first_new_target_scb:
	/*
	 * Append SCB to the tail of the waiting for
	 * selection list.
	 */
	cmp	WAITING_TID_HEAD[1], SCB_LIST_NULL je first_new_scb;
	bmov	SCBPTR, WAITING_TID_TAIL, 2;
	bmov	SCB_NEXT2, REG0, 2;
	bmov	WAITING_TID_TAIL, REG0, 2 ret;
first_new_scb:
	/*
	 * Whole list is empty, so the head of
	 * the list must be initialized too.
	 */
	bmov	WAITING_TID_HEAD, REG0, 2;
	bmov	WAITING_TID_TAIL, REG0, 2 ret;
END_CRITICAL;

scbdma_idle:
	/*
	 * Don't bother downloading new SCBs to execute
	 * if select-outs are currently frozen or we have
	 * a MK_MESSAGE SCB waiting to enter the queue.
	 */
	test	SEQ_FLAGS2, SELECTOUT_QFROZEN|PENDING_MK_MESSAGE
		jnz scbdma_no_new_scbs;
BEGIN_CRITICAL;
	test	QOFF_CTLSTA, NEW_SCB_AVAIL jnz fetch_new_scb;
scbdma_no_new_scbs:
	cmp	COMPLETE_DMA_SCB_HEAD[1], SCB_LIST_NULL jne dma_complete_scb;
	cmp	COMPLETE_SCB_HEAD[1], SCB_LIST_NULL je return;
	/* FALLTHROUGH */
fill_qoutfifo:
	/*
	 * Keep track of the SCBs we are dmaing just
	 * in case the DMA fails or is aborted.
	 */
	bmov	COMPLETE_SCB_DMAINPROG_HEAD, COMPLETE_SCB_HEAD, 2;
	mvi	CCSCBCTL, CCSCBRESET;
	bmov	SCBHADDR, QOUTFIFO_NEXT_ADDR, 4;
	mov	A, QOUTFIFO_NEXT_ADDR;
	bmov	SCBPTR, COMPLETE_SCB_HEAD, 2;
fill_qoutfifo_loop:
	bmov	CCSCBRAM, SCBPTR, 2;
	mov	CCSCBRAM, SCB_SGPTR[0];
	mov	CCSCBRAM, QOUTFIFO_ENTRY_VALID_TAG;
	mov	NONE, SDSCB_QOFF;
	inc	INT_COALESCING_CMDCOUNT;
	add	CMDS_PENDING, -1;
	adc	CMDS_PENDING[1], -1;
	cmp	SCB_NEXT_COMPLETE[1], SCB_LIST_NULL je fill_qoutfifo_done;
	cmp	CCSCBADDR, CCSCBADDR_MAX je fill_qoutfifo_done;
	test	QOFF_CTLSTA, SDSCB_ROLLOVR jnz fill_qoutfifo_done;
	/*
	 * Don't cross an ADB or Cachline boundary when DMA'ing
	 * completion entries.  In PCI mode, at least in 32/33
	 * configurations, the SCB DMA engine may lose its place
	 * in the data-stream should the target force a retry on
	 * something other than an 8byte aligned boundary. In
	 * PCI-X mode, we do this to avoid split transactions since
	 * many chipsets seem to be unable to format proper split
	 * completions to continue the data transfer.
	 */
	add	SINDEX, A, CCSCBADDR;
	test	SINDEX, CACHELINE_MASK jz fill_qoutfifo_done;
	bmov	SCBPTR, SCB_NEXT_COMPLETE, 2;
	jmp	fill_qoutfifo_loop;
fill_qoutfifo_done:
	mov	SCBHCNT, CCSCBADDR;
	mvi	CCSCBCTL, CCSCBEN|CCSCBRESET;
	bmov	COMPLETE_SCB_HEAD, SCB_NEXT_COMPLETE, 2;
	mvi	SCB_NEXT_COMPLETE[1], SCB_LIST_NULL ret;

fetch_new_scb:
	bmov	SCBHADDR, NEXT_QUEUED_SCB_ADDR, 4;
	mvi	CCARREN|CCSCBEN|CCSCBDIR|CCSCBRESET jmp dma_scb;
dma_complete_scb:
	bmov	SCBPTR, COMPLETE_DMA_SCB_HEAD, 2;
	bmov	SCBHADDR, SCB_BUSADDR, 4;
	mvi	CCARREN|CCSCBEN|CCSCBRESET jmp dma_scb;

/*
 * Either post or fetch an SCB from host memory.  The caller
 * is responsible for polling for transfer completion.
 *
 * Prerequisits: Mode == M_CCHAN
 *		 SINDEX contains CCSCBCTL flags
 *		 SCBHADDR set to Host SCB address
 *		 SCBPTR set to SCB src location on "push" operations
 */
SET_SRC_MODE	M_CCHAN;
SET_DST_MODE	M_CCHAN;
dma_scb:
	mvi	SCBHCNT, SCB_TRANSFER_SIZE;
	mov	CCSCBCTL, SINDEX ret;

setjmp:
	/*
	 * At least on the A, a return in the same
	 * instruction as the bmov results in a return
	 * to the caller, not to the new address at the
	 * top of the stack.  Since we want the latter
	 * (we use setjmp to register a handler from an
	 * interrupt context but not invoke that handler
	 * until we return to our idle loop), use a
	 * separate ret instruction.
	 */
	bmov	LONGJMP_ADDR, STACK, 2;
	ret;
setjmp_inline:
	bmov	LONGJMP_ADDR, STACK, 2;
longjmp:
	bmov	STACK, LONGJMP_ADDR, 2 ret;
END_CRITICAL;

/*************************** Chip Bug Work Arounds ****************************/
/*
 * Must disable interrupts when setting the mode pointer
 * register as an interrupt occurring mid update will
 * fail to store the new mode value for restoration on
 * an iret.
 */
if ((ahd->bugs & AHD_SET_MODE_BUG) != 0) {
set_mode_work_around:
	mvi	SEQINTCTL, INTVEC1DSL;
	mov	MODE_PTR, SINDEX;
	clr	SEQINTCTL ret;
}


if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
set_seqint_work_around:
	mov	SEQINTCODE, SINDEX;
	mvi	SEQINTCODE, NO_SEQINT ret;
}

/************************ Packetized LongJmp Routines *************************/
SET_SRC_MODE	M_SCSI;
SET_DST_MODE	M_SCSI;
start_selection:
BEGIN_CRITICAL;
	if ((ahd->bugs & AHD_SENT_SCB_UPDATE_BUG) != 0) {
		/*
		 * Razor #494
		 * Rev A hardware fails to update LAST/CURR/NEXTSCB
		 * correctly after a packetized selection in several
		 * situations:
		 *
		 * 1) If only one command existed in the queue, the
		 *    LAST/CURR/NEXTSCB are unchanged.
		 *
		 * 2) In a non QAS, protocol allowed phase change,
		 *    the queue is shifted 1 too far.  LASTSCB is
		 *    the last SCB that was correctly processed.
		 * 
		 * 3) In the QAS case, if the full list of commands
		 *    was successfully sent, NEXTSCB is NULL and neither
		 *    CURRSCB nor LASTSCB can be trusted.  We must
		 *    manually walk the list counting MAXCMDCNT elements
		 *    to find the last SCB that was sent correctly.
		 *
		 * To simplify the workaround for this bug in SELDO
		 * handling, we initialize LASTSCB prior to enabling
		 * selection so we can rely on it even for case #1 above.
		 */
		bmov	LASTSCB, WAITING_TID_HEAD, 2;
	}
	bmov	CURRSCB, WAITING_TID_HEAD, 2;
	bmov	SCBPTR, WAITING_TID_HEAD, 2;
	shr	SELOID, 4, SCB_SCSIID;
	/*
	 * If we want to send a message to the device, ensure
	 * we are selecting with atn regardless of our packetized
	 * agreement.  Since SPI4 only allows target reset or PPR
	 * messages if this is a packetized connection, the change
	 * to our negotiation table entry for this selection will
	 * be cleared when the message is acted on.
	 */
	test	SCB_CONTROL, MK_MESSAGE jz . + 3;
	mov	NEGOADDR, SELOID;
	or	NEGCONOPTS, ENAUTOATNO;
	or	SCSISEQ0, ENSELO ret;
END_CRITICAL;

/*
 * Allocate a FIFO for a non-packetized transaction.
 * In RevA hardware, both FIFOs must be free before we
 * can allocate a FIFO for a non-packetized transaction.
 */
allocate_fifo_loop:
	/*
	 * Do whatever work is required to free a FIFO.
	 */
	call	idle_loop_service_fifos;
	SET_MODE(M_SCSI, M_SCSI)
allocate_fifo:
	if ((ahd->bugs & AHD_NONPACKFIFO_BUG) != 0) {
		and	A, FIFO0FREE|FIFO1FREE, DFFSTAT;
		cmp	A, FIFO0FREE|FIFO1FREE jne allocate_fifo_loop;
	} else {
		test	DFFSTAT, FIFO1FREE jnz allocate_fifo1;
		test	DFFSTAT, FIFO0FREE jz allocate_fifo_loop;
		mvi	DFFSTAT, B_CURRFIFO_0;
		SET_MODE(M_DFF0, M_DFF0)
		bmov	SCBPTR, ALLOCFIFO_SCBPTR, 2 ret;
	}
SET_SRC_MODE	M_SCSI;
SET_DST_MODE	M_SCSI;
allocate_fifo1:
	mvi	DFFSTAT, CURRFIFO_1;
	SET_MODE(M_DFF1, M_DFF1)
	bmov	SCBPTR, ALLOCFIFO_SCBPTR, 2 ret;

/*
 * We have been reselected as an initiator
 * or selected as a target.
 */
SET_SRC_MODE	M_SCSI;
SET_DST_MODE	M_SCSI;
select_in:
	if ((ahd->bugs & AHD_FAINT_LED_BUG) != 0) {
		/*
		 * On Rev A. hardware, the busy LED is only
		 * turned on automaically during selections
		 * and re-selections.  Make the LED status
		 * more useful by forcing it to be on from
		 * the point of selection until our idle
		 * loop determines that neither of our FIFOs
		 * are busy.  This handles the non-packetized
		 * case nicely as we will not return to the
		 * idle loop until the busfree at the end of
		 * each transaction.
		 */
		or	SBLKCTL, DIAGLEDEN|DIAGLEDON;
	}
	if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
		/*
		 * Test to ensure that the bus has not
		 * already gone free prior to clearing
		 * any stale busfree status.  This avoids
		 * a window whereby a busfree just after
		 * a selection could be missed.
		 */
		test	SCSISIGI, BSYI jz . + 2;
		mvi	CLRSINT1,CLRBUSFREE;
		or	SIMODE1, ENBUSFREE;
	}
	or	SXFRCTL0, SPIOEN;
	and	SAVED_SCSIID, SELID_MASK, SELID;
	and	A, OID, IOWNID;
	or	SAVED_SCSIID, A;
	mvi	CLRSINT0, CLRSELDI;
	jmp	ITloop;

/*
 * We have successfully selected out.
 *
 * Clear SELDO.
 * Dequeue all SCBs sent from the waiting queue
 * Requeue all SCBs *not* sent to the tail of the waiting queue
 * Take Razor #494 into account for above.
 *
 * In Packetized Mode:
 *	Return to the idle loop.  Our interrupt handler will take
 *	care of any incoming L_Qs.
 *
 * In Non-Packetize Mode:
 *	Continue to our normal state machine.
 */
SET_SRC_MODE	M_SCSI;
SET_DST_MODE	M_SCSI;
select_out:
BEGIN_CRITICAL;
	if ((ahd->bugs & AHD_FAINT_LED_BUG) != 0) {
		/*
		 * On Rev A. hardware, the busy LED is only
		 * turned on automaically during selections
		 * and re-selections.  Make the LED status
		 * more useful by forcing it to be on from
		 * the point of re-selection until our idle
		 * loop determines that neither of our FIFOs
		 * are busy.  This handles the non-packetized
		 * case nicely as we will not return to the
		 * idle loop until the busfree at the end of
		 * each transaction.
		 */
		or	SBLKCTL, DIAGLEDEN|DIAGLEDON;
	}
	/* Clear out all SCBs that have been successfully sent. */
	if ((ahd->bugs & AHD_SENT_SCB_UPDATE_BUG) != 0) {
		/*
		 * For packetized, the LQO manager clears ENSELO on
		 * the assertion of SELDO.  If we are non-packetized,
		 * LASTSCB and CURRSCB are accurate.
		 */
		test	SCSISEQ0, ENSELO jnz use_lastscb;

		/*
		 * The update is correct for LQOSTAT1 errors.  All
		 * but LQOBUSFREE are handled by kernel interrupts.
		 * If we see LQOBUSFREE, return to the idle loop.
		 * Once we are out of the select_out critical section,
		 * the kernel will cleanup the LQOBUSFREE and we will
		 * eventually restart the selection if appropriate.
		 */
		test	LQOSTAT1, LQOBUSFREE jnz idle_loop;

		/*
		 * On a phase change oustside of packet boundaries,
		 * LASTSCB points to the currently active SCB context
		 * on the bus.
		 */
		test	LQOSTAT2, LQOPHACHGOUTPKT jnz use_lastscb;

		/*
		 * If the hardware has traversed the whole list, NEXTSCB
		 * will be NULL, CURRSCB and LASTSCB cannot be trusted,
		 * but MAXCMDCNT is accurate.  If we stop part way through
		 * the list or only had one command to issue, NEXTSCB[1] is
		 * not NULL and LASTSCB is the last command to go out.
		 */
		cmp	NEXTSCB[1], SCB_LIST_NULL jne use_lastscb;

		/*
		 * Brute force walk.
		 */
		bmov	SCBPTR, WAITING_TID_HEAD, 2;
		mvi	SEQINTCTL, INTVEC1DSL;
		mvi	MODE_PTR, MK_MODE(M_CFG, M_CFG);
		mov	A, MAXCMDCNT;
		mvi	MODE_PTR, MK_MODE(M_SCSI, M_SCSI);
		clr	SEQINTCTL;
find_lastscb_loop:
		dec	A;
		test	A, 0xFF jz found_last_sent_scb;
		bmov	SCBPTR, SCB_NEXT, 2;
		jmp	find_lastscb_loop;
use_lastscb:
		bmov	SCBPTR, LASTSCB, 2;
found_last_sent_scb:
		bmov	CURRSCB, SCBPTR, 2;
curscb_ww_done:
	} else {
		bmov	SCBPTR, CURRSCB, 2;
	}

	/*
	 * The whole list made it.  Clear our tail pointer to indicate
	 * that the per-target selection queue is now empty.
	 */
	cmp	SCB_NEXT[1], SCB_LIST_NULL je select_out_clear_tail;

	/*
	 * Requeue any SCBs not sent, to the tail of the waiting Q.
	 * We know that neither the per-TID list nor the list of
	 * TIDs is empty.  Use this knowledge to our advantage and
	 * queue the remainder to the tail of the global execution
	 * queue.
	 */
	bmov	REG0, SCB_NEXT, 2;
select_out_queue_remainder:
	bmov	SCBPTR, WAITING_TID_TAIL, 2;
	bmov	SCB_NEXT2, REG0, 2;
	bmov	WAITING_TID_TAIL, REG0, 2;
	jmp	select_out_inc_tid_q;

select_out_clear_tail:
	/*
	 * Queue any pending MK_MESSAGE SCB for this target now
	 * that the queue is empty.
	 */
	test	SEQ_FLAGS2, PENDING_MK_MESSAGE jz select_out_no_mk_message_scb;
	mov	A, MK_MESSAGE_SCSIID;
	cmp	SCB_SCSIID, A jne select_out_no_mk_message_scb;
	and	SEQ_FLAGS2, ~PENDING_MK_MESSAGE;
	bmov	REG0, MK_MESSAGE_SCB, 2;
	jmp select_out_queue_remainder;

select_out_no_mk_message_scb:
	/*
	 * Clear this target's execution tail and increment the queue.
	 */
	shr	DINDEX, 3, SCB_SCSIID;
	or	DINDEX, 1;	/* Want only the second byte */
	mvi	DINDEX[1], ((WAITING_SCB_TAILS) >> 8);
	mvi	DINDIR, SCB_LIST_NULL;
select_out_inc_tid_q:
	bmov	SCBPTR, WAITING_TID_HEAD, 2;
	bmov	WAITING_TID_HEAD, SCB_NEXT2, 2;
	cmp	WAITING_TID_HEAD[1], SCB_LIST_NULL jne . + 2;
	mvi	WAITING_TID_TAIL[1], SCB_LIST_NULL;
	bmov	SCBPTR, CURRSCB, 2;
	mvi	CLRSINT0, CLRSELDO;
	test	LQOSTAT2, LQOPHACHGOUTPKT jnz unexpected_nonpkt_mode_cleared;
	test	LQOSTAT1, LQOPHACHGINPKT jnz unexpected_nonpkt_mode_cleared;

	/*
	 * If this is a packetized connection, return to our
	 * idle_loop and let our interrupt handler deal with
	 * any connection setup/teardown issues.  The only
	 * exceptions are the case of MK_MESSAGE and task management
	 * SCBs.
	 */
	if ((ahd->bugs & AHD_LQO_ATNO_BUG) != 0) {
		/*
		 * In the A, the LQO manager transitions to LQOSTOP0 even if
		 * we have selected out with ATN asserted and the target
		 * REQs in a non-packet phase.
		 */
		test 	SCB_CONTROL, MK_MESSAGE jz select_out_no_message;
		test	SCSISIGO, ATNO jnz select_out_non_packetized;
select_out_no_message:
	}
	test	LQOSTAT2, LQOSTOP0 jz select_out_non_packetized;
	test	SCB_TASK_MANAGEMENT, 0xFF jz idle_loop;
	SET_SEQINTCODE(TASKMGMT_FUNC_COMPLETE)
	jmp	idle_loop;

select_out_non_packetized:
	/* Non packetized request. */
	and     SCSISEQ0, ~ENSELO;
	if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
		/*
		 * Test to ensure that the bus has not
		 * already gone free prior to clearing
		 * any stale busfree status.  This avoids
		 * a window whereby a busfree just after
		 * a selection could be missed.
		 */
		test	SCSISIGI, BSYI jz . + 2;
		mvi	CLRSINT1,CLRBUSFREE;
		or	SIMODE1, ENBUSFREE;
	}
	mov	SAVED_SCSIID, SCB_SCSIID;
	mov	SAVED_LUN, SCB_LUN;
	mvi	SEQ_FLAGS, NO_CDB_SENT;
END_CRITICAL;
	or	SXFRCTL0, SPIOEN;

	/*
	 * As soon as we get a successful selection, the target
	 * should go into the message out phase since we have ATN
	 * asserted.
	 */
	mvi	MSG_OUT, MSG_IDENTIFYFLAG;

	/*
	 * Main loop for information transfer phases.  Wait for the
	 * target to assert REQ before checking MSG, C/D and I/O for
	 * the bus phase.
	 */
mesgin_phasemis:
ITloop:
	call	phase_lock;

	mov	A, LASTPHASE;

	test	A, ~P_DATAIN_DT	jz p_data;
	cmp	A,P_COMMAND	je p_command;
	cmp	A,P_MESGOUT	je p_mesgout;
	cmp	A,P_STATUS	je p_status;
	cmp	A,P_MESGIN	je p_mesgin;

	SET_SEQINTCODE(BAD_PHASE)
	jmp	ITloop;			/* Try reading the bus again. */

/*
 * Command phase.  Set up the DMA registers and let 'er rip.
 */
p_command:
	test	SEQ_FLAGS, NOT_IDENTIFIED jz p_command_okay;
	SET_SEQINTCODE(PROTO_VIOLATION)
p_command_okay:
	test	MODE_PTR, ~(MK_MODE(M_DFF1, M_DFF1))
		jnz p_command_allocate_fifo;
	/*
	 * Command retry.  Free our current FIFO and
	 * re-allocate a FIFO so transfer state is
	 * reset.
	 */
SET_SRC_MODE	M_DFF1;
SET_DST_MODE	M_DFF1;
	mvi	DFFSXFRCTL, RSTCHN|CLRSHCNT;
	SET_MODE(M_SCSI, M_SCSI)
p_command_allocate_fifo:
	bmov	ALLOCFIFO_SCBPTR, SCBPTR, 2;
	call	allocate_fifo;
SET_SRC_MODE	M_DFF1;
SET_DST_MODE	M_DFF1;
	add	NONE, -17, SCB_CDB_LEN;
	jnc	p_command_embedded;
p_command_from_host:
	bmov	HADDR[0], SCB_HOST_CDB_PTR, 9;
	mvi	SG_CACHE_PRE, LAST_SEG;
	mvi	DFCNTRL, (PRELOADEN|SCSIEN|HDMAEN);
	jmp	p_command_xfer;
p_command_embedded:
	bmov	SHCNT[0], SCB_CDB_LEN,  1;
	bmov	DFDAT, SCB_CDB_STORE, 16; 
	mvi	DFCNTRL, SCSIEN;
p_command_xfer:
	and	SEQ_FLAGS, ~NO_CDB_SENT;
	if ((ahd->features & AHD_FAST_CDB_DELIVERY) != 0) {
		/*
		 * To speed up CDB delivery in Rev B, all CDB acks
		 * are "released" to the output sync as soon as the
		 * command phase starts.  There is only one problem
		 * with this approach.  If the target changes phase
		 * before all data are sent, we have left over acks
		 * that can go out on the bus in a data phase.  Due
		 * to other chip contraints, this only happens if
		 * the target goes to data-in, but if the acks go
		 * out before we can test SDONE, we'll think that
		 * the transfer has completed successfully.  Work
		 * around this by taking advantage of the 400ns or
		 * 800ns dead time between command phase and the REQ
		 * of the new phase.  If the transfer has completed
		 * successfully, SCSIEN should fall *long* before we
		 * see a phase change.  We thus treat any phasemiss
		 * that occurs before SCSIEN falls as an incomplete
		 * transfer.
		 */
		test	SSTAT1, PHASEMIS jnz p_command_xfer_failed;
		test	DFCNTRL, SCSIEN jnz . - 1;
	} else {
		test	DFCNTRL, SCSIEN jnz .;
	}
	/*
	 * DMA Channel automatically disabled.
	 * Don't allow a data phase if the command
	 * was not fully transferred.
	 */
	test	SSTAT2, SDONE jnz ITloop;
p_command_xfer_failed:
	or	SEQ_FLAGS, NO_CDB_SENT;
	jmp	ITloop;


/*
 * Status phase.  Wait for the data byte to appear, then read it
 * and store it into the SCB.
 */
SET_SRC_MODE	M_SCSI;
SET_DST_MODE	M_SCSI;
p_status:
	test	SEQ_FLAGS,NOT_IDENTIFIED jnz mesgin_proto_violation;
p_status_okay:
	mov	SCB_SCSI_STATUS, SCSIDAT;
	or	SCB_CONTROL, STATUS_RCVD;
	jmp	ITloop;

/*
 * Message out phase.  If MSG_OUT is MSG_IDENTIFYFLAG, build a full
 * indentify message sequence and send it to the target.  The host may
 * override this behavior by setting the MK_MESSAGE bit in the SCB
 * control byte.  This will cause us to interrupt the host and allow
 * it to handle the message phase completely on its own.  If the bit
 * associated with this target is set, we will also interrupt the host,
 * thereby allowing it to send a message on the next selection regardless
 * of the transaction being sent.
 * 
 * If MSG_OUT is == HOST_MSG, also interrupt the host and take a message.
 * This is done to allow the host to send messages outside of an identify
 * sequence while protecting the seqencer from testing the MK_MESSAGE bit
 * on an SCB that might not be for the current nexus. (For example, a
 * BDR message in response to a bad reselection would leave us pointed to
 * an SCB that doesn't have anything to do with the current target).
 *
 * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
 * bus device reset).
 *
 * When there are no messages to send, MSG_OUT should be set to MSG_NOOP,
 * in case the target decides to put us in this phase for some strange
 * reason.
 */
p_mesgout_retry:
	/* Turn on ATN for the retry */
	mvi	SCSISIGO, ATNO;
p_mesgout:
	mov	SINDEX, MSG_OUT;
	cmp	SINDEX, MSG_IDENTIFYFLAG jne p_mesgout_from_host;
	test	SCB_CONTROL,MK_MESSAGE	jnz host_message_loop;
p_mesgout_identify:
	or	SINDEX, MSG_IDENTIFYFLAG|DISCENB, SCB_LUN;
	test	SCB_CONTROL, DISCENB jnz . + 2;
	and	SINDEX, ~DISCENB;
/*
 * Send a tag message if TAG_ENB is set in the SCB control block.
 * Use SCB_NONPACKET_TAG as the tag value.
 */
p_mesgout_tag:
	test	SCB_CONTROL,TAG_ENB jz  p_mesgout_onebyte;
	mov	SCSIDAT, SINDEX;	/* Send the identify message */
	call	phase_lock;
	cmp	LASTPHASE, P_MESGOUT	jne p_mesgout_done;
	and	SCSIDAT,TAG_ENB|SCB_TAG_TYPE,SCB_CONTROL;
	call	phase_lock;
	cmp	LASTPHASE, P_MESGOUT	jne p_mesgout_done;
	mov	SCBPTR jmp p_mesgout_onebyte;
/*
 * Interrupt the driver, and allow it to handle this message
 * phase and any required retries.
 */
p_mesgout_from_host:
	cmp	SINDEX, HOST_MSG	jne p_mesgout_onebyte;
	jmp	host_message_loop;

p_mesgout_onebyte:
	mvi	CLRSINT1, CLRATNO;
	mov	SCSIDAT, SINDEX;

/*
 * If the next bus phase after ATN drops is message out, it means
 * that the target is requesting that the last message(s) be resent.
 */
	call	phase_lock;
	cmp	LASTPHASE, P_MESGOUT	je p_mesgout_retry;

p_mesgout_done:
	mvi	CLRSINT1,CLRATNO;	/* Be sure to turn ATNO off */
	mov	LAST_MSG, MSG_OUT;
	mvi	MSG_OUT, MSG_NOOP;	/* No message left */
	jmp	ITloop;

/*
 * Message in phase.  Bytes are read using Automatic PIO mode.
 */
p_mesgin:
	/* read the 1st message byte */
	mvi	ACCUM		call inb_first;

	test	A,MSG_IDENTIFYFLAG	jnz mesgin_identify;
	cmp	A,MSG_DISCONNECT	je mesgin_disconnect;
	cmp	A,MSG_SAVEDATAPOINTER	je mesgin_sdptrs;
	cmp	ALLZEROS,A		je mesgin_complete;
	cmp	A,MSG_RESTOREPOINTERS	je mesgin_rdptrs;
	cmp	A,MSG_IGN_WIDE_RESIDUE	je mesgin_ign_wide_residue;
	cmp	A,MSG_NOOP		je mesgin_done;

/*
 * Pushed message loop to allow the kernel to
 * run it's own message state engine.  To avoid an
 * extra nop instruction after signaling the kernel,
 * we perform the phase_lock before checking to see
 * if we should exit the loop and skip the phase_lock
 * in the ITloop.  Performing back to back phase_locks
 * shouldn't hurt, but why do it twice...
 */
host_message_loop:
	call	phase_lock;	/* Benign the first time through. */
	SET_SEQINTCODE(HOST_MSG_LOOP)
	cmp	RETURN_1, EXIT_MSG_LOOP	je ITloop;
	cmp	RETURN_1, CONT_MSG_LOOP_WRITE	jne . + 3;
	mov	SCSIDAT, RETURN_2;
	jmp	host_message_loop;
	/* Must be CONT_MSG_LOOP_READ */
	mov	NONE, SCSIDAT;	/* ACK Byte */
	jmp	host_message_loop;

mesgin_ign_wide_residue:
	mov	SAVED_MODE, MODE_PTR;
	SET_MODE(M_SCSI, M_SCSI)
	shr	NEGOADDR, 4, SAVED_SCSIID;
	mov	A, NEGCONOPTS;
	RESTORE_MODE(SAVED_MODE)
	test	A, WIDEXFER jz mesgin_reject;
	/* Pull the residue byte */
	mvi	REG0	call inb_next;
	cmp	REG0, 0x01 jne mesgin_reject;
	test	SCB_RESIDUAL_SGPTR[0], SG_LIST_NULL jz . + 2;
	test	SCB_TASK_ATTRIBUTE, SCB_XFERLEN_ODD jnz mesgin_done;
	SET_SEQINTCODE(IGN_WIDE_RES)
	jmp	mesgin_done;

mesgin_proto_violation:
	SET_SEQINTCODE(PROTO_VIOLATION)
	jmp	mesgin_done;
mesgin_reject:
	mvi	MSG_MESSAGE_REJECT	call mk_mesg;
mesgin_done:
	mov	NONE,SCSIDAT;		/*dummy read from latch to ACK*/
	jmp	ITloop;

#define INDEX_DISC_LIST(scsiid, lun)					\
	and	A, 0xC0, scsiid;					\
	or	SCBPTR, A, lun;						\
	clr	SCBPTR[1];						\
	and	SINDEX, 0x30, scsiid;					\
	shr	SINDEX, 3;	/* Multiply by 2 */			\
	add	SINDEX, (SCB_DISCONNECTED_LISTS & 0xFF);		\
	mvi	SINDEX[1], ((SCB_DISCONNECTED_LISTS >> 8) & 0xFF)

mesgin_identify:
	/*
	 * Determine whether a target is using tagged or non-tagged
	 * transactions by first looking at the transaction stored in
	 * the per-device, disconnected array.  If there is no untagged
	 * transaction for this target, this must be a tagged transaction.
	 */
	and	SAVED_LUN, MSG_IDENTIFY_LUNMASK, A;
	INDEX_DISC_LIST(SAVED_SCSIID, SAVED_LUN);
	bmov	DINDEX, SINDEX, 2;
	bmov	REG0, SINDIR, 2;
	cmp	REG0[1], SCB_LIST_NULL je snoop_tag;
	/* Untagged.  Clear the busy table entry and setup the SCB. */
	bmov	DINDIR, ALLONES, 2;
	bmov	SCBPTR, REG0, 2;
	jmp	setup_SCB;

/*
 * Here we "snoop" the bus looking for a SIMPLE QUEUE TAG message.
 * If we get one, we use the tag returned to find the proper
 * SCB.  After receiving the tag, look for the SCB at SCB locations tag and
 * tag + 256.
 */
snoop_tag:
	if ((ahd->flags & AHD_SEQUENCER_DEBUG) != 0) {
		or	SEQ_FLAGS, 0x80;
	}
	mov	NONE, SCSIDAT;		/* ACK Identify MSG */
	call	phase_lock;
	if ((ahd->flags & AHD_SEQUENCER_DEBUG) != 0) {
		or	SEQ_FLAGS, 0x1;
	}
	cmp	LASTPHASE, P_MESGIN	jne not_found_ITloop;
	if ((ahd->flags & AHD_SEQUENCER_DEBUG) != 0) {
		or	SEQ_FLAGS, 0x2;
	}
	cmp	SCSIBUS, MSG_SIMPLE_Q_TAG jne not_found;
get_tag:
	clr	SCBPTR[1];
	mvi	SCBPTR	call inb_next;	/* tag value */
verify_scb:
	test	SCB_CONTROL,DISCONNECTED jz verify_other_scb;
	mov	A, SAVED_SCSIID;
	cmp	SCB_SCSIID, A jne verify_other_scb;
	mov	A, SAVED_LUN;
	cmp	SCB_LUN, A je setup_SCB_disconnected;
verify_other_scb:
	xor	SCBPTR[1], 1;
	test	SCBPTR[1], 0xFF jnz verify_scb;
	jmp	not_found;

/*
 * Ensure that the SCB the tag points to is for
 * an SCB transaction to the reconnecting target.
 */
setup_SCB:
	if ((ahd->flags & AHD_SEQUENCER_DEBUG) != 0) {
		or	SEQ_FLAGS, 0x10;
	}
	test	SCB_CONTROL,DISCONNECTED jz not_found;
setup_SCB_disconnected:
	and	SCB_CONTROL,~DISCONNECTED;
	clr	SEQ_FLAGS;	/* make note of IDENTIFY */
	test	SCB_SGPTR, SG_LIST_NULL jnz . + 3;
	bmov	ALLOCFIFO_SCBPTR, SCBPTR, 2;
	call	allocate_fifo;
	/* See if the host wants to send a message upon reconnection */
	test	SCB_CONTROL, MK_MESSAGE jz mesgin_done;
	mvi	HOST_MSG	call mk_mesg;
	jmp	mesgin_done;

not_found:
	SET_SEQINTCODE(NO_MATCH)
	jmp	mesgin_done;

not_found_ITloop:
	SET_SEQINTCODE(NO_MATCH)
	jmp	ITloop;

/*
 * We received a "command complete" message.  Put the SCB on the complete
 * queue and trigger a completion interrupt via the idle loop.  Before doing
 * so, check to see if there is a residual or the status byte is something
 * other than STATUS_GOOD (0).  In either of these conditions, we upload the
 * SCB back to the host so it can process this information.
 */
mesgin_complete:

	/*
	 * If ATN is raised, we still want to give the target a message.
	 * Perhaps there was a parity error on this last message byte.
	 * Either way, the target should take us to message out phase
	 * and then attempt to complete the command again.  We should use a
	 * critical section here to guard against a timeout triggering
	 * for this command and setting ATN while we are still processing
	 * the completion.
	test	SCSISIGI, ATNI jnz mesgin_done;
	 */

	/*
	 * If we are identified and have successfully sent the CDB,
	 * any status will do.  Optimize this fast path.
	 */
	test	SCB_CONTROL, STATUS_RCVD jz mesgin_proto_violation;
	test	SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT jz complete_accepted;

	/*
	 * If the target never sent an identify message but instead went
	 * to mesgin to give an invalid message, let the host abort us.
	 */
	test	SEQ_FLAGS, NOT_IDENTIFIED jnz mesgin_proto_violation;

	/*
	 * If we recevied good status but never successfully sent the
	 * cdb, abort the command.
	 */
	test	SCB_SCSI_STATUS,0xff	jnz complete_accepted;
	test	SEQ_FLAGS, NO_CDB_SENT jnz mesgin_proto_violation;
complete_accepted:

	/*
	 * See if we attempted to deliver a message but the target ingnored us.
	 */
	test	SCB_CONTROL, MK_MESSAGE jz complete_nomsg;
	SET_SEQINTCODE(MKMSG_FAILED)
complete_nomsg:
	call	queue_scb_completion;
	jmp	await_busfree;

BEGIN_CRITICAL;
freeze_queue:
	/* Cancel any pending select-out. */
	test	SSTAT0, SELDO|SELINGO jnz . + 2;
	and	SCSISEQ0, ~ENSELO;
	mov	ACCUM_SAVE, A;
	clr	A;
	add	QFREEZE_COUNT, 1;
	adc	QFREEZE_COUNT[1], A;
	or	SEQ_FLAGS2, SELECTOUT_QFROZEN;
	mov	A, ACCUM_SAVE ret;
END_CRITICAL;

/*
 * Complete the current FIFO's SCB if data for this same
 * SCB is not transferring in the other FIFO.
 */
SET_SRC_MODE	M_DFF1;
SET_DST_MODE	M_DFF1;
pkt_complete_scb_if_fifos_idle:
	bmov	ARG_1, SCBPTR, 2;
	mvi	DFFSXFRCTL, CLRCHN;
	SET_MODE(M_SCSI, M_SCSI)
	bmov	SCBPTR, ARG_1, 2;
	test	SCB_FIFO_USE_COUNT, 0xFF jnz return;
queue_scb_completion:
	test	SCB_SCSI_STATUS,0xff	jnz bad_status;
	/*
	 * Check for residuals
	 */
	test	SCB_SGPTR, SG_LIST_NULL jnz complete;	/* No xfer */
	test	SCB_SGPTR, SG_FULL_RESID jnz upload_scb;/* Never xfered */
	test	SCB_RESIDUAL_SGPTR, SG_LIST_NULL jz upload_scb;
complete:
BEGIN_CRITICAL;
	bmov	SCB_NEXT_COMPLETE, COMPLETE_SCB_HEAD, 2;
	bmov	COMPLETE_SCB_HEAD, SCBPTR, 2 ret;
END_CRITICAL;
bad_status:
	cmp	SCB_SCSI_STATUS, STATUS_PKT_SENSE je upload_scb;
	call	freeze_queue;
upload_scb:
	/*
	 * Restore SCB TAG since we reuse this field
	 * in the sequencer.  We don't want to corrupt
	 * it on the host.
	 */
	bmov	SCB_TAG, SCBPTR, 2;
BEGIN_CRITICAL;
	or	SCB_SGPTR, SG_STATUS_VALID;
	mvi	SCB_NEXT_COMPLETE[1], SCB_LIST_NULL;
	cmp	COMPLETE_DMA_SCB_HEAD[1], SCB_LIST_NULL jne add_dma_scb_tail;
	bmov	COMPLETE_DMA_SCB_HEAD, SCBPTR, 2;
	bmov	COMPLETE_DMA_SCB_TAIL, SCBPTR, 2 ret;
add_dma_scb_tail:
	bmov	REG0, SCBPTR, 2;
	bmov	SCBPTR, COMPLETE_DMA_SCB_TAIL, 2;
	bmov	SCB_NEXT_COMPLETE, REG0, 2;
	bmov	COMPLETE_DMA_SCB_TAIL, REG0, 2 ret;
END_CRITICAL;

/*
 * Is it a disconnect message?  Set a flag in the SCB to remind us
 * and await the bus going free.  If this is an untagged transaction
 * store the SCB id for it in our untagged target table for lookup on
 * a reselection.
 */
mesgin_disconnect:
	/*
	 * If ATN is raised, we still want to give the target a message.
	 * Perhaps there was a parity error on this last message byte
	 * or we want to abort this command.  Either way, the target
	 * should take us to message out phase and then attempt to
	 * disconnect again.
	 * XXX - Wait for more testing.
	test	SCSISIGI, ATNI jnz mesgin_done;
	 */
	test	SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT
		jnz mesgin_proto_violation;
	or	SCB_CONTROL,DISCONNECTED;
	test	SCB_CONTROL, TAG_ENB jnz await_busfree;
queue_disc_scb:
	bmov	REG0, SCBPTR, 2;
	INDEX_DISC_LIST(SAVED_SCSIID, SAVED_LUN);
	bmov	DINDEX, SINDEX, 2;
	bmov	DINDIR, REG0, 2;
	bmov	SCBPTR, REG0, 2;
	/* FALLTHROUGH */
await_busfree:
	and	SIMODE1, ~ENBUSFREE;
	if ((ahd->bugs & AHD_BUSFREEREV_BUG) == 0) {
		/*
		 * In the BUSFREEREV_BUG case, the
		 * busfree status was cleared at the
		 * beginning of the connection.
		 */
		mvi	CLRSINT1,CLRBUSFREE;
	}
	mov	NONE, SCSIDAT;		/* Ack the last byte */
	test	MODE_PTR, ~(MK_MODE(M_DFF1, M_DFF1))
		jnz await_busfree_not_m_dff;
SET_SRC_MODE	M_DFF1;
SET_DST_MODE	M_DFF1;
await_busfree_clrchn:
	mvi	DFFSXFRCTL, CLRCHN;
await_busfree_not_m_dff:
	/* clear target specific flags */
	mvi	SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT;
	test	SSTAT1,REQINIT|BUSFREE	jz .;
	/*
	 * We only set BUSFREE status once either a new
	 * phase has been detected or we are really
	 * BUSFREE.  This allows the driver to know
	 * that we are active on the bus even though
	 * no identified transaction exists should a
	 * timeout occur while awaiting busfree.
	 */
	mvi	LASTPHASE, P_BUSFREE;
	test	SSTAT1, BUSFREE jnz idle_loop;
	SET_SEQINTCODE(MISSED_BUSFREE)


/*
 * Save data pointers message:
 * Copying RAM values back to SCB, for Save Data Pointers message, but
 * only if we've actually been into a data phase to change them.  This
 * protects against bogus data in scratch ram and the residual counts
 * since they are only initialized when we go into data_in or data_out.
 * Ack the message as soon as possible.
 */
SET_SRC_MODE	M_DFF1;
SET_DST_MODE	M_DFF1;
mesgin_sdptrs:
	mov	NONE,SCSIDAT;		/*dummy read from latch to ACK*/
	test	SEQ_FLAGS, DPHASE	jz ITloop;
	call	save_pointers;
	jmp	ITloop;

save_pointers:
	/*
	 * If we are asked to save our position at the end of the
	 * transfer, just mark us at the end rather than perform a
	 * full save.
	 */
	test	SCB_RESIDUAL_SGPTR[0], SG_LIST_NULL jz save_pointers_full;
	or	SCB_SGPTR, SG_LIST_NULL ret;

save_pointers_full:
	/*
	 * The SCB_DATAPTR becomes the current SHADDR.
	 * All other information comes directly from our residual
	 * state.
	 */
	bmov	SCB_DATAPTR, SHADDR, 8;
	bmov	SCB_DATACNT, SCB_RESIDUAL_DATACNT, 8 ret;

/*
 * Restore pointers message?  Data pointers are recopied from the
 * SCB anytime we enter a data phase for the first time, so all
 * we need to do is clear the DPHASE flag and let the data phase
 * code do the rest.  We also reset/reallocate the FIFO to make
 * sure we have a clean start for the next data or command phase.
 */
mesgin_rdptrs:
	and	SEQ_FLAGS, ~DPHASE;
	test	MODE_PTR, ~(MK_MODE(M_DFF1, M_DFF1)) jnz msgin_rdptrs_get_fifo;
	mvi	DFFSXFRCTL, RSTCHN|CLRSHCNT;
	SET_MODE(M_SCSI, M_SCSI)
msgin_rdptrs_get_fifo:
	call	allocate_fifo;
	jmp	mesgin_done;

phase_lock:     
	if ((ahd->bugs & AHD_EARLY_REQ_BUG) != 0) {
		/*
		 * Don't ignore persistent REQ assertions just because
		 * they were asserted within the bus settle delay window.
		 * This allows us to tolerate devices like the GEM318
		 * that violate the SCSI spec.  We are careful not to
		 * count REQ while we are waiting for it to fall during
		 * an async phase due to our asserted ACK.  Each
		 * sequencer instruction takes ~25ns, so the REQ must
		 * last at least 100ns in order to be counted as a true
		 * REQ.
		 */
		test	SCSIPHASE, 0xFF jnz phase_locked;
		test	SCSISIGI, ACKI jnz phase_lock;
		test	SCSISIGI, REQI jz phase_lock;
		test	SCSIPHASE, 0xFF jnz phase_locked;
		test	SCSISIGI, ACKI jnz phase_lock;
		test	SCSISIGI, REQI jz phase_lock;
phase_locked:
	} else {
		test	SCSIPHASE, 0xFF jz .;
	}
	test	SSTAT1, SCSIPERR jnz phase_lock;
phase_lock_latch_phase:
	and	LASTPHASE, PHASE_MASK, SCSISIGI ret;

/*
 * Functions to read data in Automatic PIO mode.
 *
 * An ACK is not sent on input from the target until SCSIDATL is read from.
 * So we wait until SCSIDATL is latched (the usual way), then read the data
 * byte directly off the bus using SCSIBUSL.  When we have pulled the ATN
 * line, or we just want to acknowledge the byte, then we do a dummy read
 * from SCISDATL.  The SCSI spec guarantees that the target will hold the
 * data byte on the bus until we send our ACK.
 *
 * The assumption here is that these are called in a particular sequence,
 * and that REQ is already set when inb_first is called.  inb_{first,next}
 * use the same calling convention as inb.
 */
inb_next:
	mov	NONE,SCSIDAT;		/*dummy read from latch to ACK*/
inb_next_wait:
	/*
	 * If there is a parity error, wait for the kernel to
	 * see the interrupt and prepare our message response
	 * before continuing.
	 */
	test	SCSIPHASE, 0xFF jz .;
	test	SSTAT1, SCSIPERR jnz inb_next_wait;
inb_next_check_phase:
	and	LASTPHASE, PHASE_MASK, SCSISIGI;
	cmp	LASTPHASE, P_MESGIN jne mesgin_phasemis;
inb_first:
	clr	DINDEX[1];
	mov	DINDEX,SINDEX;
	mov	DINDIR,SCSIBUS	ret;		/*read byte directly from bus*/
inb_last:
	mov	NONE,SCSIDAT ret;		/*dummy read from latch to ACK*/

mk_mesg:
	mvi	SCSISIGO, ATNO;
	mov	MSG_OUT,SINDEX ret;

SET_SRC_MODE	M_DFF1;
SET_DST_MODE	M_DFF1;
disable_ccsgen:
	test	SG_STATE, FETCH_INPROG jz disable_ccsgen_fetch_done;
	clr	CCSGCTL;
disable_ccsgen_fetch_done:
	clr	SG_STATE ret;

service_fifo:
	/*
	 * Do we have any prefetch left???
	 */
	test	SG_STATE, SEGS_AVAIL jnz idle_sg_avail;

	/*
	 * Can this FIFO have access to the S/G cache yet?
	 */
	test	CCSGCTL, SG_CACHE_AVAIL jz return;

	/* Did we just finish fetching segs? */
	test	CCSGCTL, CCSGDONE jnz idle_sgfetch_complete;

	/* Are we actively fetching segments? */
	test	CCSGCTL, CCSGENACK jnz return;

	/*
	 * Should the other FIFO get the S/G cache first?  If
	 * both FIFOs have been allocated since we last checked
	 * any FIFO, it is important that we service a FIFO
	 * that is not actively on the bus first.  This guarantees
	 * that a FIFO will be freed to handle snapshot requests for
	 * any FIFO that is still on the bus.  Chips with RTI do not
	 * perform snapshots, so don't bother with this test there.
	 */
	if ((ahd->features & AHD_RTI) == 0) {
		/*
		 * If we're not still receiving SCSI data,
		 * it is safe to allocate the S/G cache to
		 * this FIFO.
		 */
		test	DFCNTRL, SCSIEN jz idle_sgfetch_start;

		/*
		 * Switch to the other FIFO.  Non-RTI chips
		 * also have the "set mode" bug, so we must
		 * disable interrupts during the switch.
		 */
		mvi	SEQINTCTL, INTVEC1DSL;
		xor	MODE_PTR, MK_MODE(M_DFF1, M_DFF1);

		/*
		 * If the other FIFO needs loading, then it
		 * must not have claimed the S/G cache yet
		 * (SG_CACHE_AVAIL would have been cleared in
		 * the original FIFO mode and we test this above).
		 * Return to the idle loop so we can process the
		 * FIFO not currently on the bus first.
		 */
		test	SG_STATE, LOADING_NEEDED jz idle_sgfetch_okay;
		clr	SEQINTCTL ret;
idle_sgfetch_okay:
		xor	MODE_PTR, MK_MODE(M_DFF1, M_DFF1);
		clr	SEQINTCTL;
	}

idle_sgfetch_start:
	/*
	 * We fetch a "cacheline aligned" and sized amount of data
	 * so we don't end up referencing a non-existent page.
	 * Cacheline aligned is in quotes because the kernel will
	 * set the prefetch amount to a reasonable level if the
	 * cacheline size is unknown.
	 */
	bmov	SGHADDR, SCB_RESIDUAL_SGPTR, 4;
	mvi	SGHCNT, SG_PREFETCH_CNT;
	if ((ahd->bugs & AHD_REG_SLOW_SETTLE_BUG) != 0) {
		/*
		 * Need two instructions between "touches" of SGHADDR.
		 */
		nop;
	}
	and	SGHADDR[0], SG_PREFETCH_ALIGN_MASK, SCB_RESIDUAL_SGPTR;
	mvi	CCSGCTL, CCSGEN|CCSGRESET;
	or	SG_STATE, FETCH_INPROG ret;
idle_sgfetch_complete:
	/*
	 * Guard against SG_CACHE_AVAIL activating during sg fetch
	 * request in the other FIFO.
	 */
	test	SG_STATE, FETCH_INPROG jz return;
	clr	CCSGCTL;
	and	CCSGADDR, SG_PREFETCH_ADDR_MASK, SCB_RESIDUAL_SGPTR;
	mvi	SG_STATE, SEGS_AVAIL|LOADING_NEEDED;
idle_sg_avail:
	/* Does the hardware have space for another SG entry? */
	test	DFSTATUS, PRELOAD_AVAIL jz return;
	/*
	 * On the A, preloading a segment before HDMAENACK
	 * comes true can clobber the shadow address of the
	 * first segment in the S/G FIFO.  Wait until it is
	 * safe to proceed.
	 */
	if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) == 0) {
		test	DFCNTRL, HDMAENACK jz return;
	}
	if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
		bmov	HADDR, CCSGRAM, 8;
	} else {
		bmov 	HADDR, CCSGRAM, 4;
	}
	bmov	HCNT, CCSGRAM, 3;
	bmov	SCB_RESIDUAL_DATACNT[3], CCSGRAM, 1;
	if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
		and	HADDR[4], SG_HIGH_ADDR_BITS, SCB_RESIDUAL_DATACNT[3];
	}
	if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
		/* Skip 4 bytes of pad. */
		add	CCSGADDR, 4;
	}
sg_advance:
	clr	A;			/* add sizeof(struct scatter) */
	add	SCB_RESIDUAL_SGPTR[0],SG_SIZEOF;
	adc	SCB_RESIDUAL_SGPTR[1],A;
	adc	SCB_RESIDUAL_SGPTR[2],A;
	adc	SCB_RESIDUAL_SGPTR[3],A;
	mov	SINDEX, SCB_RESIDUAL_SGPTR[0];
	test	SCB_RESIDUAL_DATACNT[3], SG_LAST_SEG jz . + 3;
	or	SINDEX, LAST_SEG;
	clr	SG_STATE;
	mov	SG_CACHE_PRE, SINDEX;
	if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) {
		/*
		 * Use SCSIENWRDIS so that SCSIEN is never
		 * modified by this operation.
		 */
		or	DFCNTRL, PRELOADEN|HDMAEN|SCSIENWRDIS;
	} else {
		or	DFCNTRL, PRELOADEN|HDMAEN;
	}
	/*
	 * Do we have another segment in the cache?
	 */
	add	NONE, SG_PREFETCH_CNT_LIMIT, CCSGADDR;
	jnc	return;
	and	SG_STATE, ~SEGS_AVAIL ret;

/*
 * Initialize the DMA address and counter from the SCB.
 */
load_first_seg:
	bmov	HADDR, SCB_DATAPTR, 11;
	and	REG_ISR, ~SG_FULL_RESID, SCB_SGPTR[0];
	test	SCB_DATACNT[3], SG_LAST_SEG jz . + 2;
	or	REG_ISR, LAST_SEG;
	mov	SG_CACHE_PRE, REG_ISR;
	mvi	DFCNTRL, (PRELOADEN|SCSIEN|HDMAEN);
	/*
	 * Since we've are entering a data phase, we will
	 * rely on the SCB_RESID* fields.  Initialize the
	 * residual and clear the full residual flag.
	 */
	and	SCB_SGPTR[0], ~SG_FULL_RESID;
	bmov	SCB_RESIDUAL_DATACNT[3], SCB_DATACNT[3], 5;
	/* If we need more S/G elements, tell the idle loop */
	test	SCB_RESIDUAL_DATACNT[3], SG_LAST_SEG jnz . + 2;
	mvi	SG_STATE, LOADING_NEEDED ret;
	clr	SG_STATE ret;

p_data_handle_xfer:
	call	setjmp;
	test	SG_STATE, LOADING_NEEDED jnz service_fifo;
p_data_clear_handler:
	or	LONGJMP_ADDR[1], INVALID_ADDR ret;

p_data:
	test	SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT	jz p_data_allowed;
	SET_SEQINTCODE(PROTO_VIOLATION)
p_data_allowed:
 
	test	SEQ_FLAGS, DPHASE	jz data_phase_initialize;

	/*
	 * If we re-enter the data phase after going through another
	 * phase, our transfer location has almost certainly been
	 * corrupted by the interveining, non-data, transfers.  Ask
	 * the host driver to fix us up based on the transfer residual
	 * unless we already know that we should be bitbucketing.
	 */
	test	SCB_RESIDUAL_SGPTR[0], SG_LIST_NULL jnz p_data_bitbucket;
	SET_SEQINTCODE(PDATA_REINIT)
	jmp	data_phase_inbounds;

p_data_bitbucket:
	/*
	 * Turn on `Bit Bucket' mode, wait until the target takes
	 * us to another phase, and then notify the host.
	 */
	mov	SAVED_MODE, MODE_PTR;
	test	MODE_PTR, ~(MK_MODE(M_DFF1, M_DFF1))
		jnz bitbucket_not_m_dff;
	/*
	 * Ensure that any FIFO contents are cleared out and the
	 * FIFO free'd prior to starting the BITBUCKET.  BITBUCKET
	 * doesn't discard data already in the FIFO.
	 */
	mvi	DFFSXFRCTL, RSTCHN|CLRSHCNT;
	SET_MODE(M_SCSI, M_SCSI)
bitbucket_not_m_dff:
	or	SXFRCTL1,BITBUCKET;
	/* Wait for non-data phase. */
	test	SCSIPHASE, ~DATA_PHASE_MASK jz .;
	and	SXFRCTL1, ~BITBUCKET;
	RESTORE_MODE(SAVED_MODE)
SET_SRC_MODE	M_DFF1;
SET_DST_MODE	M_DFF1;
	SET_SEQINTCODE(DATA_OVERRUN)
	jmp	ITloop;

data_phase_initialize:
	test	SCB_SGPTR[0], SG_LIST_NULL jnz p_data_bitbucket;
	call	load_first_seg;
data_phase_inbounds:
	/* We have seen a data phase at least once. */
	or	SEQ_FLAGS, DPHASE;
	mov	SAVED_MODE, MODE_PTR;
	test	SG_STATE, LOADING_NEEDED jz data_group_dma_loop;
	call	p_data_handle_xfer;
data_group_dma_loop:
	/*
	 * The transfer is complete if either the last segment
	 * completes or the target changes phase.  Both conditions
	 * will clear SCSIEN.
	 */
	call	idle_loop_service_fifos;
	call	idle_loop_cchan;
	call	idle_loop_gsfifo;
	RESTORE_MODE(SAVED_MODE)
	test	DFCNTRL, SCSIEN jnz data_group_dma_loop;

data_group_dmafinish:
	/*
	 * The transfer has terminated either due to a phase
	 * change, and/or the completion of the last segment.
	 * We have two goals here.  Do as much other work
	 * as possible while the data fifo drains on a read
	 * and respond as quickly as possible to the standard
	 * messages (save data pointers/disconnect and command
	 * complete) that usually follow a data phase.
	 */
	call	calc_residual;

	/*
	 * Go ahead and shut down the DMA engine now.
	 */
	test	DFCNTRL, DIRECTION jnz data_phase_finish;
data_group_fifoflush:
	if ((ahd->bugs & AHD_AUTOFLUSH_BUG) != 0) {
		or	DFCNTRL, FIFOFLUSH;
	}
	/*
	 * We have enabled the auto-ack feature.  This means
	 * that the controller may have already transferred
	 * some overrun bytes into the data FIFO and acked them
	 * on the bus.  The only way to detect this situation is
	 * to wait for LAST_SEG_DONE to come true on a completed
	 * transfer and then test to see if the data FIFO is
	 * non-empty.  We know there is more data yet to transfer
	 * if SG_LIST_NULL is not yet set, thus there cannot be
	 * an overrun.
	 */
	test	SCB_RESIDUAL_SGPTR[0], SG_LIST_NULL jz data_phase_finish;
	test	SG_CACHE_SHADOW, LAST_SEG_DONE jz .;
	test	DFSTATUS, FIFOEMP jnz data_phase_finish;
	/* Overrun */
	jmp	p_data;
data_phase_finish:
	/*
	 * If the target has left us in data phase, loop through
	 * the dma code again.  We will only loop if there is a
	 * data overrun.  
	 */
	if ((ahd->flags & AHD_TARGETROLE) != 0) {
		test	SSTAT0, TARGET jnz data_phase_done;
	}
	if ((ahd->flags & AHD_INITIATORROLE) != 0) {
		test	SSTAT1, REQINIT jz .;
		test	SCSIPHASE, DATA_PHASE_MASK jnz p_data;
	}

data_phase_done:
	/* Kill off any pending prefetch */
	call	disable_ccsgen;
	or 	LONGJMP_ADDR[1], INVALID_ADDR;

	if ((ahd->flags & AHD_TARGETROLE) != 0) {
		test	SEQ_FLAGS, DPHASE_PENDING jz ITloop;
		/*
		and	SEQ_FLAGS, ~DPHASE_PENDING;
		 * For data-in phases, wait for any pending acks from the
		 * initiator before changing phase.  We only need to
		 * send Ignore Wide Residue messages for data-in phases.
		test	DFCNTRL, DIRECTION jz target_ITloop;
		test	SSTAT1, REQINIT	jnz .;
		test	SCB_TASK_ATTRIBUTE, SCB_XFERLEN_ODD jz target_ITloop;
		SET_MODE(M_SCSI, M_SCSI)
		test	NEGCONOPTS, WIDEXFER jz target_ITloop;
		 */
		/*
		 * Issue an Ignore Wide Residue Message.
		mvi	P_MESGIN|BSYO call change_phase;
		mvi	MSG_IGN_WIDE_RESIDUE call target_outb;
		mvi	1 call target_outb;
		jmp	target_ITloop;
		 */
	} else {
		jmp	ITloop;
	}

/*
 * We assume that, even though data may still be
 * transferring to the host, that the SCSI side of
 * the DMA engine is now in a static state.  This
 * allows us to update our notion of where we are
 * in this transfer.
 *
 * If, by chance, we stopped before being able
 * to fetch additional segments for this transfer,
 * yet the last S/G was completely exhausted,
 * call our idle loop until it is able to load
 * another segment.  This will allow us to immediately
 * pickup on the next segment on the next data phase.
 *
 * If we happened to stop on the last segment, then
 * our residual information is still correct from
 * the idle loop and there is no need to perform
 * any fixups.
 */
residual_before_last_seg:
	test    MDFFSTAT, SHVALID	jnz sgptr_fixup;
	/*
	 * Can never happen from an interrupt as the packetized
	 * hardware will only interrupt us once SHVALID or
	 * LAST_SEG_DONE.
	 */
	call	idle_loop_service_fifos;
	RESTORE_MODE(SAVED_MODE)
	/* FALLTHROUGH */
calc_residual:
	test	SG_CACHE_SHADOW, LAST_SEG jz residual_before_last_seg;
	/* Record if we've consumed all S/G entries */
	test	MDFFSTAT, SHVALID	jz . + 2;
	bmov	SCB_RESIDUAL_DATACNT, SHCNT, 3 ret;
	or	SCB_RESIDUAL_SGPTR[0], SG_LIST_NULL ret;

sgptr_fixup:
	/*
	 * Fixup the residual next S/G pointer.  The S/G preload
	 * feature of the chip allows us to load two elements
	 * in addition to the currently active element.  We
	 * store the bottom byte of the next S/G pointer in
	 * the SG_CACHE_PTR register so we can restore the
	 * correct value when the DMA completes.  If the next
	 * sg ptr value has advanced to the point where higher
	 * bytes in the address have been affected, fix them
	 * too.
	 */
	test	SG_CACHE_SHADOW, 0x80 jz sgptr_fixup_done;
	test	SCB_RESIDUAL_SGPTR[0], 0x80 jnz sgptr_fixup_done;
	add	SCB_RESIDUAL_SGPTR[1], -1;
	adc	SCB_RESIDUAL_SGPTR[2], -1; 
	adc	SCB_RESIDUAL_SGPTR[3], -1;
sgptr_fixup_done:
	and	SCB_RESIDUAL_SGPTR[0], SG_ADDR_MASK, SG_CACHE_SHADOW;
	clr	SCB_RESIDUAL_DATACNT[3]; /* We are not the last seg */
	bmov	SCB_RESIDUAL_DATACNT, SHCNT, 3 ret;

export timer_isr:
	call	issue_cmdcmplt;
	mvi	CLRSEQINTSTAT, CLRSEQ_SWTMRTO;
	if ((ahd->bugs & AHD_SET_MODE_BUG) != 0) {
		/*
		 * In H2A4, the mode pointer is not saved
		 * for intvec2, but is restored on iret.
		 * This can lead to the restoration of a
		 * bogus mode ptr.  Manually clear the
		 * intmask bits and do a normal return
		 * to compensate.
		 */
		and	SEQINTCTL, ~(INTMASK2|INTMASK1) ret;
	} else {
		or	SEQINTCTL, IRET ret;
	}

export seq_isr:
	if ((ahd->features & AHD_RTI) == 0) {
		/*
		 * On RevA Silicon, if the target returns us to data-out
		 * after we have already trained for data-out, it is
		 * possible for us to transition the free running clock to
		 * data-valid before the required 100ns P1 setup time (8 P1
		 * assertions in fast-160 mode).  This will only happen if
		 * this L-Q is a continuation of a data transfer for which
		 * we have already prefetched data into our FIFO (LQ/Data
		 * followed by LQ/Data for the same write transaction).
		 * This can cause some target implementations to miss the
		 * first few data transfers on the bus.  We detect this
		 * situation by noticing that this is the first data transfer
		 * after an LQ (LQIWORKONLQ true), that the data transfer is
		 * a continuation of a transfer already setup in our FIFO
		 * (SAVEPTRS interrupt), and that the transaction is a write
		 * (DIRECTION set in DFCNTRL). The delay is performed by
		 * disabling SCSIEN until we see the first REQ from the
		 * target.
		 * 
		 * First instruction in an ISR cannot be a branch on
		 * Rev A.  Snapshot LQISTAT2 so the status is not missed
		 * and deffer the test by one instruction.
		 */
		mov	REG_ISR, LQISTAT2;
		test	REG_ISR, LQIWORKONLQ jz main_isr;
		test	SEQINTSRC, SAVEPTRS  jz main_isr;
		test	LONGJMP_ADDR[1], INVALID_ADDR jz saveptr_active_fifo;
		/*
		 * Switch to the active FIFO after clearing the snapshot
		 * savepointer in the current FIFO.  We do this so that
		 * a pending CTXTDONE or SAVEPTR is visible in the active
		 * FIFO.  This status is the only way we can detect if we
		 * have lost the race (e.g. host paused us) and our attempts
		 * to disable the channel occurred after all REQs were
		 * already seen and acked (REQINIT never comes true).
		 */
		mvi	DFFSXFRCTL, CLRCHN;
		xor	MODE_PTR, MK_MODE(M_DFF1, M_DFF1);
		test	DFCNTRL, DIRECTION jz interrupt_return;
		and	DFCNTRL, ~SCSIEN;
snapshot_wait_data_valid:
		test	SEQINTSRC, (CTXTDONE|SAVEPTRS) jnz interrupt_return;
		test	SSTAT1, REQINIT	jz snapshot_wait_data_valid;
snapshot_data_valid:
		or	DFCNTRL, SCSIEN;
		or	SEQINTCTL, IRET ret;
snapshot_saveptr:
		mvi	DFFSXFRCTL, CLRCHN;
		or	SEQINTCTL, IRET ret;
main_isr:
	}
	test	SEQINTSRC, CFG4DATA	jnz cfg4data_intr;
	test	SEQINTSRC, CFG4ISTAT	jnz cfg4istat_intr;
	test	SEQINTSRC, SAVEPTRS	jnz saveptr_intr;
	test	SEQINTSRC, CFG4ICMD	jnz cfg4icmd_intr;
	SET_SEQINTCODE(INVALID_SEQINT)

/*
 * There are two types of save pointers interrupts:
 * The first is a snapshot save pointers where the current FIFO is not
 * active and contains a snapshot of the current poniter information.
 * This happens between packets in a stream for a single L_Q.  Since we
 * are not performing a pointer save, we can safely clear the channel
 * so it can be used for other transactions.  On RTI capable controllers,
 * where snapshots can, and are, disabled, the code to handle this type
 * of snapshot is not active.
 *
 * The second case is a save pointers on an active FIFO which occurs
 * if the target changes to a new L_Q or busfrees/QASes and the transfer
 * has a residual.  This should occur coincident with a ctxtdone.  We
 * disable the interrupt and allow our active routine to handle the
 * save.
 */
saveptr_intr:
	if ((ahd->features & AHD_RTI) == 0) {
		test	LONGJMP_ADDR[1], INVALID_ADDR jnz snapshot_saveptr;
	}
saveptr_active_fifo:
	and	SEQIMODE, ~ENSAVEPTRS;
	or	SEQINTCTL, IRET ret;

cfg4data_intr:
	test	SCB_SGPTR[0], SG_LIST_NULL jnz pkt_handle_overrun_inc_use_count;
	call	load_first_seg;
	call	pkt_handle_xfer;
	inc	SCB_FIFO_USE_COUNT;
interrupt_return:
	or	SEQINTCTL, IRET ret;

cfg4istat_intr:
	call	freeze_queue;
	add	NONE, -13, SCB_CDB_LEN;
	jnc	cfg4istat_have_sense_addr;
	test	SCB_CDB_LEN, SCB_CDB_LEN_PTR jnz cfg4istat_have_sense_addr;
	/*
	 * Host sets up address/count and enables transfer.
	 */
	SET_SEQINTCODE(CFG4ISTAT_INTR)
	jmp	cfg4istat_setup_handler;
cfg4istat_have_sense_addr:
	bmov	HADDR, SCB_SENSE_BUSADDR, 4;
	mvi	HCNT[1], (AHD_SENSE_BUFSIZE >> 8);
	mvi	SG_CACHE_PRE, LAST_SEG;
	mvi	DFCNTRL, PRELOADEN|SCSIEN|HDMAEN;
cfg4istat_setup_handler:
	/*
	 * Status pkt is transferring to host.
	 * Wait in idle loop for transfer to complete.
	 * If a command completed before an attempted
	 * task management function completed, notify the host.
	 */
	test	SCB_TASK_MANAGEMENT, 0xFF jz cfg4istat_no_taskmgmt_func;
	SET_SEQINTCODE(TASKMGMT_CMD_CMPLT_OKAY)
cfg4istat_no_taskmgmt_func:
	call	pkt_handle_status;
	or	SEQINTCTL, IRET ret;

cfg4icmd_intr:
	/*
	 * In the case of DMAing a CDB from the host, the normal
	 * CDB buffer is formatted with an 8 byte address followed
	 * by a 1 byte count.
	 */
	bmov	HADDR[0], SCB_HOST_CDB_PTR, 9;
	mvi	SG_CACHE_PRE, LAST_SEG;
	mvi	DFCNTRL, (PRELOADEN|SCSIEN|HDMAEN);
	call	pkt_handle_cdb;
	or	SEQINTCTL, IRET ret;

/*
 * See if the target has gone on in this context creating an
 * overrun condition.  For the write case, the hardware cannot
 * ack bytes until data are provided.  So, if the target begins
 * another  packet without changing contexts, implying we are
 * not sitting on a packet boundary, we are in an overrun
 * situation.  For the read case, the hardware will continue to
 * ack bytes into the FIFO, and may even ack the last overrun packet
 * into the FIFO.   If the FIFO should become non-empty, we are in
 * a read overrun case.
 */
#define check_overrun							\
	/* Not on a packet boundary. */					\
	test 	MDFFSTAT, DLZERO jz pkt_handle_overrun;			\
	test	DFSTATUS, FIFOEMP jz pkt_handle_overrun

pkt_handle_xfer:
	test	SG_STATE, LOADING_NEEDED jz pkt_last_seg;
	call	setjmp;
	test	SEQINTSRC, SAVEPTRS jnz pkt_saveptrs;
	test	SCSIPHASE, ~DATA_PHASE_MASK jz . + 2;
	test	SCSISIGO, ATNO jnz . + 2;
	test	SSTAT2, NONPACKREQ jz pkt_service_fifo;
	/*
	 * Defer handling of this NONPACKREQ until we
	 * can be sure it pertains to this FIFO.  SAVEPTRS
	 * will not be asserted if the NONPACKREQ is for us,
	 * so we must simulate it if shadow is valid.  If
	 * shadow is not valid, keep running this FIFO until we
	 * have satisfied the transfer by loading segments and
	 * waiting for either shadow valid or last_seg_done.
	 */
	test	MDFFSTAT, SHVALID jnz pkt_saveptrs;
pkt_service_fifo:
	test	SG_STATE, LOADING_NEEDED jnz service_fifo;
pkt_last_seg:
	call	setjmp;
	test	SEQINTSRC, SAVEPTRS jnz pkt_saveptrs;
	test	SG_CACHE_SHADOW, LAST_SEG_DONE jnz pkt_last_seg_done;
	test	SCSIPHASE, ~DATA_PHASE_MASK jz . + 2;
	test	SCSISIGO, ATNO jnz . + 2;
	test	SSTAT2, NONPACKREQ jz return;
	test	MDFFSTAT, SHVALID jz return;
	/* FALLTHROUGH */

/*
 * Either a SAVEPTRS interrupt condition is pending for this FIFO
 * or we have a pending NONPACKREQ for this FIFO.  We differentiate
 * between the two by capturing the state of the SAVEPTRS interrupt
 * prior to clearing this status and executing the common code for
 * these two cases.
 */
pkt_saveptrs:
BEGIN_CRITICAL;
	if ((ahd->bugs & AHD_AUTOFLUSH_BUG) != 0) {
		or	DFCNTRL, FIFOFLUSH;
	}
	mov	REG0, SEQINTSRC;
	call	calc_residual;
	call	save_pointers;
	mvi	CLRSEQINTSRC, CLRSAVEPTRS;
	call	disable_ccsgen;
	or	SEQIMODE, ENSAVEPTRS;
	test	DFCNTRL, DIRECTION jnz pkt_saveptrs_check_status;
	test	DFSTATUS, FIFOEMP jnz pkt_saveptrs_check_status;
	/*
	 * Keep a handler around for this FIFO until it drains
	 * to the host to guarantee that we don't complete the
	 * command to the host before the data arrives.
	 */
pkt_saveptrs_wait_fifoemp:
	call	setjmp;
	test	DFSTATUS, FIFOEMP jz return;
pkt_saveptrs_check_status:
	or	LONGJMP_ADDR[1], INVALID_ADDR;
	test	REG0, SAVEPTRS jz unexpected_nonpkt_phase;
	dec	SCB_FIFO_USE_COUNT;
	test	SCB_CONTROL, STATUS_RCVD jnz pkt_complete_scb_if_fifos_idle;
	mvi	DFFSXFRCTL, CLRCHN ret;

/*
 * LAST_SEG_DONE status has been seen in the current FIFO.
 * This indicates that all of the allowed data for this
 * command has transferred across the SCSI and host buses.
 * Check for overrun and see if we can complete this command.
 */
pkt_last_seg_done:
	/*
	 * Mark transfer as completed.
	 */
	or	SCB_SGPTR, SG_LIST_NULL;

	/*
	 * Wait for the current context to finish to verify that
	 * no overrun condition has occurred.
	 */
	test	SEQINTSRC, CTXTDONE jnz pkt_ctxt_done;
	call	setjmp;
pkt_wait_ctxt_done_loop:
	test	SEQINTSRC, CTXTDONE jnz pkt_ctxt_done;
	/*
	 * A sufficiently large overrun or a NONPACKREQ may
	 * prevent CTXTDONE from ever asserting, so we must
	 * poll for these statuses too.
	 */
	check_overrun;
	test	SSTAT2, NONPACKREQ jz return;
	test	SEQINTSRC, CTXTDONE jz unexpected_nonpkt_phase;
	/* FALLTHROUGH */

pkt_ctxt_done:
	check_overrun;
	or	LONGJMP_ADDR[1], INVALID_ADDR;
	/*
	 * If status has been received, it is safe to skip
	 * the check to see if another FIFO is active because
	 * LAST_SEG_DONE has been observed.  However, we check
	 * the FIFO anyway since it costs us only one extra
	 * instruction to leverage common code to perform the
	 * SCB completion.
	 */
	dec	SCB_FIFO_USE_COUNT;
	test	SCB_CONTROL, STATUS_RCVD jnz pkt_complete_scb_if_fifos_idle;
	mvi	DFFSXFRCTL, CLRCHN ret;
END_CRITICAL;

/*
 * Must wait until CDB xfer is over before issuing the
 * clear channel.
 */
pkt_handle_cdb:
	call	setjmp;
	test	SG_CACHE_SHADOW, LAST_SEG_DONE jz return;
	or	LONGJMP_ADDR[1], INVALID_ADDR;
	mvi	DFFSXFRCTL, CLRCHN ret;

/*
 * Watch over the status transfer.  Our host sense buffer is
 * large enough to take the maximum allowed status packet.
 * None-the-less, we must still catch and report overruns to
 * the host.  Additionally, properly catch unexpected non-packet
 * phases that are typically caused by CRC errors in status packet
 * transmission.
 */
pkt_handle_status:
	call	setjmp;
	test	SG_CACHE_SHADOW, LAST_SEG_DONE jnz pkt_status_check_overrun;
	test	SEQINTSRC, CTXTDONE jz pkt_status_check_nonpackreq;
	test	SG_CACHE_SHADOW, LAST_SEG_DONE jnz pkt_status_check_overrun;
pkt_status_IU_done:
	if ((ahd->bugs & AHD_AUTOFLUSH_BUG) != 0) {
		or	DFCNTRL, FIFOFLUSH;
	}
	test	DFSTATUS, FIFOEMP jz return;
BEGIN_CRITICAL;
	or	LONGJMP_ADDR[1], INVALID_ADDR;
	mvi	SCB_SCSI_STATUS, STATUS_PKT_SENSE;
	or	SCB_CONTROL, STATUS_RCVD;
	jmp	pkt_complete_scb_if_fifos_idle;
END_CRITICAL;
pkt_status_check_overrun:
	/*
	 * Status PKT overruns are uncerimoniously recovered with a
	 * bus reset.  If we've overrun, let the host know so that
	 * recovery can be performed.
	 *
	 * LAST_SEG_DONE has been observed.  If either CTXTDONE or
	 * a NONPACKREQ phase change have occurred and the FIFO is
	 * empty, there is no overrun.
	 */
	test	DFSTATUS, FIFOEMP jz pkt_status_report_overrun;
	test	SEQINTSRC, CTXTDONE jz . + 2;
	test	DFSTATUS, FIFOEMP jnz pkt_status_IU_done;
	test	SCSIPHASE, ~DATA_PHASE_MASK jz return;
	test	DFSTATUS, FIFOEMP jnz pkt_status_check_nonpackreq;
pkt_status_report_overrun:
	SET_SEQINTCODE(STATUS_OVERRUN)
	/* SEQUENCER RESTARTED */
pkt_status_check_nonpackreq:
	/*
	 * CTXTDONE may be held off if a NONPACKREQ is associated with
	 * the current context.  If a NONPACKREQ is observed, decide
	 * if it is for the current context.  If it is for the current
	 * context, we must defer NONPACKREQ processing until all data
	 * has transferred to the host.
	 */
	test	SCSIPHASE, ~DATA_PHASE_MASK jz return;
	test	SCSISIGO, ATNO jnz . + 2;
	test	SSTAT2, NONPACKREQ jz return;
	test	SEQINTSRC, CTXTDONE jnz pkt_status_IU_done;
	test	DFSTATUS, FIFOEMP jz return;
	/*
	 * The unexpected nonpkt phase handler assumes that any
	 * data channel use will have a FIFO reference count.  It
	 * turns out that the status handler doesn't need a references
	 * count since the status received flag, and thus completion
	 * processing, cannot be set until the handler is finished.
	 * We increment the count here to make the nonpkt handler
	 * happy.
	 */
	inc	SCB_FIFO_USE_COUNT;
	/* FALLTHROUGH */

/*
 * Nonpackreq is a polled status.  It can come true in three situations:
 * we have received an L_Q, we have sent one or more L_Qs, or there is no
 * L_Q context associated with this REQ (REQ occurs immediately after a
 * (re)selection).  Routines that know that the context responsible for this
 * nonpackreq call directly into unexpected_nonpkt_phase.  In the case of the
 * top level idle loop, we exhaust all active contexts prior to determining that
 * we simply do not have the full I_T_L_Q for this phase.
 */
unexpected_nonpkt_phase_find_ctxt:
	/*
	 * This nonpackreq is most likely associated with one of the tags
	 * in a FIFO or an outgoing LQ.  Only treat it as an I_T only
	 * nonpackreq if we've cleared out the FIFOs and handled any
	 * pending SELDO.
	 */
SET_SRC_MODE	M_SCSI;
SET_DST_MODE	M_SCSI;
	and	A, FIFO1FREE|FIFO0FREE, DFFSTAT;
	cmp	A, FIFO1FREE|FIFO0FREE jne return;
	test	SSTAT0, SELDO jnz return;
	mvi	SCBPTR[1], SCB_LIST_NULL;
unexpected_nonpkt_phase:
	test	MODE_PTR, ~(MK_MODE(M_DFF1, M_DFF1))
		jnz unexpected_nonpkt_mode_cleared;
SET_SRC_MODE	M_DFF0;
SET_DST_MODE	M_DFF0;
	or	LONGJMP_ADDR[1], INVALID_ADDR;
	dec	SCB_FIFO_USE_COUNT;
	mvi	DFFSXFRCTL, CLRCHN;
unexpected_nonpkt_mode_cleared:
	mvi	CLRSINT2, CLRNONPACKREQ;
	if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
		/*
		 * Test to ensure that the bus has not
		 * already gone free prior to clearing
		 * any stale busfree status.  This avoids
		 * a window whereby a busfree just after
		 * a selection could be missed.
		 */
		test	SCSISIGI, BSYI jz . + 2;
		mvi	CLRSINT1,CLRBUSFREE;
		or	SIMODE1, ENBUSFREE;
	}
	test	SCSIPHASE, ~(MSG_IN_PHASE|MSG_OUT_PHASE) jnz illegal_phase;
	SET_SEQINTCODE(ENTERING_NONPACK)
	jmp	ITloop;

illegal_phase:
	SET_SEQINTCODE(ILLEGAL_PHASE)
	jmp	ITloop;

/*
 * We have entered an overrun situation.  If we have working
 * BITBUCKET, flip that on and let the hardware eat any overrun
 * data.  Otherwise use an overrun buffer in the host to simulate
 * BITBUCKET.
 */
pkt_handle_overrun_inc_use_count:
	inc	SCB_FIFO_USE_COUNT;
pkt_handle_overrun:
	SET_SEQINTCODE(CFG4OVERRUN)
	call	freeze_queue;
	if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) == 0) {
		or	DFFSXFRCTL, DFFBITBUCKET;
SET_SRC_MODE	M_DFF1;
SET_DST_MODE	M_DFF1;
	} else {
		call	load_overrun_buf;
		mvi	DFCNTRL, (HDMAEN|SCSIEN|PRELOADEN);
	}
	call	setjmp;
	if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) {
		test	DFSTATUS, PRELOAD_AVAIL jz overrun_load_done;
		call	load_overrun_buf;
		or	DFCNTRL, PRELOADEN;
overrun_load_done:
		test	SEQINTSRC, CTXTDONE jnz pkt_overrun_end;
	} else {
		test	DFFSXFRCTL, DFFBITBUCKET jz pkt_overrun_end;
	}
	test	SSTAT2, NONPACKREQ jz return;
pkt_overrun_end:
	or	SCB_RESIDUAL_SGPTR, SG_OVERRUN_RESID;
	test	SEQINTSRC, CTXTDONE jz unexpected_nonpkt_phase;
	dec	SCB_FIFO_USE_COUNT;
	or	LONGJMP_ADDR[1], INVALID_ADDR;
	test	SCB_CONTROL, STATUS_RCVD jnz pkt_complete_scb_if_fifos_idle;
	mvi	DFFSXFRCTL, CLRCHN ret;

if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) {
load_overrun_buf:
	/*
	 * Load a dummy segment if preload space is available.
	 */
	mov 	HADDR[0], SHARED_DATA_ADDR;
	add	HADDR[1], PKT_OVERRUN_BUFOFFSET, SHARED_DATA_ADDR[1];
	mov	ACCUM_SAVE, A;
	clr	A;
	adc	HADDR[2], A, SHARED_DATA_ADDR[2];
	adc	HADDR[3], A, SHARED_DATA_ADDR[3];
	mov	A, ACCUM_SAVE;
	bmov	HADDR[4], ALLZEROS, 4;
	/* PKT_OVERRUN_BUFSIZE is a multiple of 256 */
	clr	HCNT[0];
	mvi	HCNT[1], ((PKT_OVERRUN_BUFSIZE >> 8) & 0xFF);
	clr	HCNT[2] ret;
}